[U-Boot] [RFC PATCH 0/5] move boot0 hook in the beginning for armv7

[Simon Glass]

Hi Philipp,

On 9 June 2017 at 06:59, Dr. Philipp Tomsich
<philipp.tomsich at theobroma-systems.com> wrote:
> Simon,
>
>> On 09 Jun 2017, at 14:27, Simon Glass <sjg at chromium.org> wrote:
>>
>> Hi Kever,
>>
>> On 7 June 2017 at 04:55, Kever Yang <kever.yang at rock-chips.com> wrote:
>>> Simon,
>>>
>>>
>>>
>>> On 06/07/2017 11:15 AM, Simon Glass wrote:
>>>>
>>>> Hi Kever,
>>>>
>>>> On 6 June 2017 at 20:41, Kever Yang <kever.yang at rock-chips.com> wrote:
>>>>>
>>>>> Simon,
>>>>>
>>>>>
>>>>>
>>>>> On 06/07/2017 05:08 AM, Simon Glass wrote:
>>>>>>
>>>>>> Hi Kever,
>>>>>>
>>>>>> On 31 May 2017 at 04:50, Kever Yang <kever.yang at rock-chips.com> wrote:
>>>>>>>
>>>>>>> I think the boot0 hook is suppose to add some data in the very
>>>>>>> beginning
>>>>>>> of the SPL image, am I right?
>>>>>>>
>>>>>>> Rockchip SoCs bootrom design is like this:
>>>>>>> - First 2KB or 4KB internal memory is for bootrom stack and heap;
>>>>>>> - Then the first 4-byte suppose to be a TAG like 'RK33';
>>>>>>> - The the following memory address end with '0004' is the first
>>>>>>>    instruction load and running by bootrom;
>>>>>>>
>>>>>>> Example for RK3288:
>>>>>>> Before this patch set, the SPL_TEXT_BASE is ff704004, and image write
>>>>>>> to
>>>>>>> media device after mkimage like this:
>>>>>>>
>>>>>>> ff704000: 32334b52 00000000 00000000 00000000    RK32............
>>>>>>> ff704010: 00000000 00000000 00000000 00000000    ................
>>>>>>> ff704020: ea00000f e59ff014 e59ff014 e59ff014    ................
>>>>>>> ff704030: e59ff014 e59ff014 e59ff014 e59ff014    ................
>>>>>>>
>>>>>>> Where the first instruction from bootrom is '00000000', which is a
>>>>>>> undefined instruction.
>>>>>>> The '_start' and 'reset' have to align to 0x20 for the requirement of
>>>>>>> VBAR, the memory offset '004'~'01c' are filled with '00000000'.
>>>>>>>
>>>>>>> We can use the boot0 hook to fix this issue, after this patch set,
>>>>>>> the SPL_TEXT_BASE is ff704000 and image write to media device after
>>>>>>> mkimage like this:
>>>>>>>
>>>>>>> ff704000: 32334b52 ea00001d e320f000 e320f000    RK32...... ... .
>>>>>>> ff704010: e320f000 e320f000 e320f000 e320f000    .. ... ... ... .
>>>>>>> ff704020: ea000016 e59ff014 e59ff014 e59ff014    ................
>>>>>>> ff704030: e59ff014 e59ff014 e59ff014 e59ff014    ................
>>>>>>>
>>>>>>> The first instruction from bootrom is a 'b reset', and memory of
>>>>>>> '008'~'01c' are filled with 'nop' instruction.
>>>>>>>
>>>>>>> This patch set does not provide patch for socfpga, bcm and sunxi SoCs
>>>>>>> which also
>>>>>>> enable BOOT0_HOOK, so this is a RFC patch, please advice how to make it
>>>>>>> compatible with those three platforms.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Kever Yang (5):
>>>>>>>    armv7: move boot hook before '_start'
>>>>>>>    rockchip: boot0: align to 0x20 for armv7 '_start'
>>>>>>>    rockchip: enable BOOT0_HOOK for SoCs
>>>>>>>    rockchip: configs: use aligned address for SPL_TEXT_BASE
>>>>>>>    rockchip: mkimage: use spl_boot0 for all Rockchip SoCs
>>>>>>>
>>>>>>>   arch/arm/include/asm/arch-rockchip/boot0.h |  9 ++++++++-
>>>>>>>   arch/arm/lib/vectors.S                     | 19 ++++++++++---------
>>>>>>>   arch/arm/mach-rockchip/Kconfig             |  3 +++
>>>>>>>   include/configs/rk3036_common.h            |  2 +-
>>>>>>>   include/configs/rk3288_common.h            |  2 +-
>>>>>>>   tools/rkcommon.c                           |  8 ++++----
>>>>>>>   6 files changed, 27 insertions(+), 16 deletions(-)
>>>>>>>
>>>>>>> --
>>>>>>> 1.9.1
>>>>>>>
>>>>>> Do will still need this series now that (I think) we have a fix for
>>>>>> the return-to-brom feature in u-boot-rockchip/master?
>>>>>
>>>>>
>>>>> Could you point me out exactly which fix do you talking about?
>>>>
>>>> These ones:
>>>>
>>>> a079e52d35 rockchip: mkimage: set init_boot_size to avoid confusing the
>>>> boot ROM
>>>> ee2c63912b rockchip: mkimage: force 2KB alignment for init_size
>>>> 99c700c794 rockchip: mkimage: add support for verify_header/print_header
>>>>
>>>>> This is not about return-to-brom, it's about the first instruction from
>>>>> Bootrom to SPL.
>>>>> So this is need for all Rockchip armv7 SoCs.
>>>>
>>>> OK, how did we survive before? What has changed to make this series
>>>> needed?
>>>
>>>
>>> After check with JTAG, I find that I'm wrong with cmd code '00000000',
>>> this is 'andeq r0, r0, r0', but not undefined in armv7, so it can work.
>>>
>>> I still want this patch set applied because it's better to make all the
>>> Rockchip's
>>> SPL have the same format(with 4-byte TAG space reserved), and the ddr binary
>>> from Rockchip always have pre-padding 4-byte TAG, with this patch set, we
>>> can replace each other easily and work with one mkimage tool.
>>
>> I'm not sure how to apply this since on the other thread[1] Marek says
>> it will break socfpga.
>
> To me it looks as if we need to fix the BOOT0 handling across all ARMv7
> platforms, as it looks as if the current implementation and its documentation
> contradict each other.
>
> Here’s how BOOT0 was intended:
>
> 1. from Kconfig:
>           If the SoC's BOOT0 requires a header area filled with (magic)
>           values, then choose this option, and create a define called
>           ARM_SOC_BOOT0_HOOK which contains the required assembler
>           preprocessor code.
>
> 2. from the code in arch/arm/lib/vectors.S:
> /*
>  * Various SoCs need something special and SoC-specific up front in
>  * order to boot, allow them to set that in their boot0.h file and then
>  * use it here.
>  */
>
> Can we just resolve this by changing arch/arm/lib/vectors.S to replace
> the entire content starting after the “_start:” label with the BOOT0 hook,
> if one is defined?
> This would then make it the responsibiliy of the respective BOOT0 hook
> to appropriately insert the vectors before or after its other magic and
> allow all architectures to do whatever their boot ROM requires...
>
>> Would it be possible to change the DDR binary to not include the padding?
>
> I would rather have all SPL binaries for Rockchip prepadded (and even
> insert the appropriate ‘RK30’ .. ‘RK33’ word from asm/arch-rockchip/boot0.h
> instead of from mkimage) as this is how the Rockchip ROM defines
> a SPL payload… which in turn makes the usage of the boot0-hook exactly
> what the docs for the SOC_BOOT0_HOOK want.
>
>> [1] armv7: move boot hook before '_start'

Well OK. So how many SoCs are affected by this? Is it just socfpga and
sunxi? How do we move them over?

Regards,
Simon