[U-Boot] [PATCH v2 12/13] configs: am43xx: Enable configs to support USB device boot

Vignesh R vigneshr at ti.com
Tue Jun 13 12:10:08 UTC 2017


Clean up include/configs/am43xx_evm.h and add configs to support USB
device boot for am43xx evm.

Signed-off-by: Vignesh R <vigneshr at ti.com>
---
 configs/am43xx_evm_defconfig | 13 ++++++++++++-
 include/configs/am43xx_evm.h | 27 ++++++++-------------------
 2 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig
index 4d9ec8841f8a..fc0bbdc4df71 100644
--- a/configs/am43xx_evm_defconfig
+++ b/configs/am43xx_evm_defconfig
@@ -22,7 +22,7 @@ CONFIG_ISO_PARTITION=y
 CONFIG_OF_CONTROL=y
 CONFIG_OF_LIST="am437x-gp-evm am437x-sk-evm am43x-epos-evm am437x-idk-evm"
 CONFIG_DM=y
-# CONFIG_BLK is not set
+CONFIG_BLK=y
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
 CONFIG_DFU_SF=y
@@ -50,3 +50,14 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
 CONFIG_G_DNL_VENDOR_NUM=0x0403
 CONFIG_G_DNL_PRODUCT_NUM=0xbd00
+CONFIG_MISC=y
+CONFIG_DM_USB=y
+CONFIG_CMD_USB=y
+CONFIG_DM_ETH=y
+CONFIG_SPL_USBETH_SUPPORT=y
+CONFIG_SPL_USB_GADGET_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_USB_HOST_SUPPORT=y
+CONFIG_SPL_USB_SUPPORT=y
+CONFIG_SPL_NET_SUPPORT=y
+CONFIG_SPL_NET_VCI_STRING="AM43xx U-Boot SPL"
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 1d8e39c20352..96cb45108056 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -89,20 +89,6 @@
 #define CONFIG_AM437X_USB2PHY2_HOST
 #endif
 
-#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT)
-#undef CONFIG_USB_DWC3_PHY_OMAP
-#undef CONFIG_USB_DWC3_OMAP
-#undef CONFIG_USB_DWC3
-#undef CONFIG_USB_DWC3_GADGET
-
-#undef CONFIG_USB_GADGET_DOWNLOAD
-#undef CONFIG_USB_GADGET_VBUS_DRAW
-#undef CONFIG_G_DNL_MANUFACTURER
-#undef CONFIG_G_DNL_VENDOR_NUM
-#undef CONFIG_G_DNL_PRODUCT_NUM
-#undef CONFIG_USB_GADGET_DUALSPEED
-#endif
-
 /*
  * Disable MMC DM for SPL build and can be re-enabled after adding
  * DM support in SPL
@@ -257,11 +243,6 @@
 #define CONFIG_PHYLIB
 #define PHY_ANEG_TIMEOUT	8000 /* PHY needs longer aneg time at 1G */
 
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ETH_SUPPORT)
-#undef CONFIG_ENV_IS_IN_FAT
-#define CONFIG_ENV_IS_NOWHERE
-#endif
-
 #define CONFIG_SYS_RX_ETH_BUFFER	64
 
 /* NAND support */
@@ -346,4 +327,12 @@
 #define NANDBOOT
 #endif /* CONFIG_NAND */
 
+#define CONFIG_ARCH_MISC_INIT
+
+#ifdef CONFIG_SPL_USBETH_SUPPORT
+#define CONFIG_USB_ETHER
+#define CONFIG_USB_ETH_RNDIS
+#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
+#endif
+
 #endif	/* __CONFIG_AM43XX_EVM_H */
-- 
2.13.0



More information about the U-Boot mailing list