[U-Boot] [PATCH v2 07/13] drivers: usb: dwc3: add ti dwc3 misc driver for wrapper

[Marek Vasut]

On 06/13/2017 02:10 PM, Vignesh R wrote:
> From: Mugunthan V N <mugunthanvnm at ti.com>
> 
> Add a misc driver for DWC3 wrapper, so that based on dr_mode the
> USB devices can bind to USB host or USB device drivers.
> 
> Based on dr_mode property, the device node needs to bind to either
> "host" driver or "peripheral" driver. This wrapper will on bind
> read dr_mode property and appropriately associate USB DT node with DWC3
> peripheral driver or host driver.
> 
> This is similar to what exists today for MUSB and is instantiated by
> arch_misc_init() function for am33xx and am43xx.
> 
> Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
> Signed-off-by: Vignesh R <vigneshr at ti.com>
> ---
>  drivers/usb/dwc3/dwc3-omap.c | 49 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/usb/dwc3/gadget.c    |  2 +-
>  2 files changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
> index b4dde726c6f3..b7daf499515d 100644
> --- a/drivers/usb/dwc3/dwc3-omap.c
> +++ b/drivers/usb/dwc3/dwc3-omap.c
> @@ -628,4 +628,53 @@ U_BOOT_DRIVER(dwc3_omap_peripheral) = {
>  	.priv_auto_alloc_size = sizeof(struct omap_dwc3_priv),
>  	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
>  };
> +
> +static int ti_dwc3_wrapper_bind(struct udevice *parent)
> +{
> +	ofnode node;
> +	int ret;
> +
> +	dev_for_each_subnode(node, parent) {
> +		const char *name = ofnode_get_name(node);
> +		enum usb_dr_mode dr_mode;
> +		struct udevice *dev;
> +
> +		if (strncmp(name, "usb@", 4))
> +			continue;
> +
> +		dr_mode = usb_get_dr_mode(ofnode_to_offset(node));
> +		switch (dr_mode) {
> +		case USB_DR_MODE_PERIPHERAL:
> +		case USB_DR_MODE_OTG:
> +			/* Bind MUSB device */
> +			ret = device_bind_driver_to_node(parent,
> +							 "dwc3-omap-peripheral",
> +							 name, node, &dev);
> +			if (ret) {
> +				error("dwc3 - not able to bind usb device node\n");
> +				return ret;
> +			}
> +			break;
> +		case USB_DR_MODE_HOST:
> +			/* Bind MUSB host */
> +			break;
> +		default:
> +			break;
> +		};
> +	}
> +	return 0;
> +}
> +
> +static const struct udevice_id ti_dwc3_ids[] = {
> +	{ .compatible = "ti,am437x-dwc3" },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(ti_dwc3_wrapper) = {
> +	.name	= "ti-dwc3-wrapper",
> +	.id	= UCLASS_MISC,
> +	.of_match = ti_dwc3_ids,
> +	.bind = ti_dwc3_wrapper_bind,
> +};
> +
>  #endif /* CONFIG_DM_USB */
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index e065c5aeb38d..18bbd5318e48 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2610,7 +2610,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
>  	if (ret)
>  		goto err4;
>  
> -	ret = usb_add_gadget_udc(dwc->dev, &dwc->gadget);
> +	ret = usb_add_gadget_udc((struct device *)dwc->dev, &dwc->gadget);

This is probably unintended ?

>  	if (ret) {
>  		dev_err(dwc->dev, "failed to register udc\n");
>  		goto err4;
> 


-- 
Best regards,
Marek Vasut