[U-Boot] [linux-sunxi] [PATCH v2] sun50i: h5: Add initial NanoPi NEO2 support
icenowy at aosc.io
icenowy at aosc.io
Wed Jun 14 14:39:36 UTC 2017
在 2017-06-13 18:10，Jagan Teki 写道：
> From: Jagan Teki <jagan at amarulasolutions.com>
>
> NanoPi M1 Plus is designed and developed by FriendlyElec
> using the Allwinner 64-bit H5 SOC.
Copy'n'paste error?
>
> NanoPi Neo2 key features
> - Allwinner H5, Quad-core 64-bit Cortex-A53
> - 512MB DDR3 RAM
> - microSD slot
> - 10/100/1000M Ethernet
> - Serial Debug Port
> - 5V 2A DC MicroUSB power-supply
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> Tested-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> Changes for v2:
> - Droped memory node
> - Remove /soc under regulator
> - Tested on neo2
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/sun50i-h5-nanopi-neo2.dts | 86
> ++++++++++++++++++++++++++++++++++
> board/sunxi/MAINTAINERS | 5 ++
> configs/nanopi_neo2_defconfig | 16 +++++++
> 4 files changed, 108 insertions(+)
> create mode 100644 arch/arm/dts/sun50i-h5-nanopi-neo2.dts
> create mode 100644 configs/nanopi_neo2_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index a6eab75..5d7432f 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -319,6 +319,7 @@ dtb-$(CONFIG_MACH_SUN8I_R40) += \
> dtb-$(CONFIG_MACH_SUN8I_V3S) += \
> sun8i-v3s-licheepi-zero.dtb
> dtb-$(CONFIG_MACH_SUN50I_H5) += \
> + sun50i-h5-nanopi-neo2.dtb \
> sun50i-h5-orangepi-pc2.dtb \
> sun50i-h5-orangepi-prime.dtb \
> sun50i-h5-orangepi-zero-plus2.dtb
> diff --git a/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
> b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
> new file mode 100644
> index 0000000..c08af78
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h5-nanopi-neo2.dts
> @@ -0,0 +1,86 @@
> +/*
> + * Copyright (C) 2017 Icenowy Zheng <icenowy at aosc.io>
> + * Copyright (C) 2017 Jagan Teki <jteki at openedev.com>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> the
> + * License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h5.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "FriendlyARM NanoPi NEO 2";
> + compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + reg_vcc3v3: vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&mmc0 {
> + compatible = "allwinner,sun50i-h5-mmc",
> + "allwinner,sun50i-a64-mmc",
> + "allwinner,sun5i-a13-mmc";
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
> + vmmc-supply = <®_vcc3v3>;
> + bus-width = <4>;
> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> +};
> diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
> index 77d8d17..e9f3e35 100644
> --- a/board/sunxi/MAINTAINERS
> +++ b/board/sunxi/MAINTAINERS
> @@ -257,6 +257,11 @@ M: Jelle van der Waa <jelle at vdwaa.nl>
> S: Maintained
> F: configs/nanopi_neo_defconfig
>
> +NANOPI-NEO2 BOARD
> +M: Jagan Teki <jagan at amarulasolutions.com>
> +S: Maintained
> +F: configs/nanopi_neo2_defconfig
> +
> NANOPI-NEO-AIR BOARD
> M: Jelle van der Waa <jelle at vdwaa.nl>
> S: Maintained
> diff --git a/configs/nanopi_neo2_defconfig
> b/configs/nanopi_neo2_defconfig
> new file mode 100644
> index 0000000..c0ac100
> --- /dev/null
> +++ b/configs/nanopi_neo2_defconfig
> @@ -0,0 +1,16 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN50I_H5=y
> +CONFIG_DRAM_CLK=672
> +CONFIG_DRAM_ZQ=3881977
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-nanopi-neo2"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL=y
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +# CONFIG_SPL_DOS_PARTITION is not set
> +# CONFIG_SPL_ISO_PARTITION is not set
> +# CONFIG_SPL_EFI_PARTITION is not set
> +CONFIG_SUN8I_EMAC=y
> +CONFIG_USB_EHCI_HCD=y
> --
> 2.7.4
More information about the U-Boot
mailing list