[U-Boot] [PATCH 1/1] board:ls2080ardb: Update execution of config_board_mux

[Santan Kumar]

config_board_mux() is dependent on 'hwconfig' env read value.

For some bootloaders like QSPI, env is ready only after
relocation. So delay execution of config_board_mux()
to misc_init_r().

Signed-off-by: Santan Kumar <santan.kumar at nxp.com>
---
 board/freescale/ls2080ardb/ls2080ardb.c | 27 ++++++++++++++-------------
 1 file changed, 14 insertions(+), 13 deletions(-)

diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 9d21d1e..c398844 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -195,25 +195,12 @@ int config_board_mux(int ctrl_type)
 
 int board_init(void)
 {
-	char *env_hwconfig;
-	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
 #ifdef CONFIG_FSL_MC_ENET
 	u32 __iomem *irq_ccsr = (u32 __iomem *)ISC_BASE;
 #endif
-	u32 val;
 
 	init_final_memctl_regs();
 
-	val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
-
-	env_hwconfig = getenv("hwconfig");
-
-	if (hwconfig_f("dspi", env_hwconfig) &&
-	    DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8)))
-		config_board_mux(MUX_TYPE_DSPI);
-	else
-		config_board_mux(MUX_TYPE_SDHC);
-
 #ifdef CONFIG_ENV_IS_NOWHERE
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
@@ -248,6 +235,20 @@ int board_early_init_f(void)
 
 int misc_init_r(void)
 {
+	char *env_hwconfig;
+	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
+	u32 val;
+
+	val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
+
+	env_hwconfig = getenv("hwconfig");
+
+	if (hwconfig_f("dspi", env_hwconfig) &&
+	    DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8)))
+		config_board_mux(MUX_TYPE_DSPI);
+	else
+		config_board_mux(MUX_TYPE_SDHC);
+
 	/*
 	 * LS2081ARDB RevF board has smart voltage translator
 	 * which needs to be programmed to enable high speed SD interface
-- 
1.9.1