[U-Boot] [PATCH v1] rockchip: video: mipi: Modify variable type for arm32 compatibility

Eric Gao eric.gao at rock-chips.com
Fri Jun 16 10:41:44 UTC 2017


Some address relevant varibable is defined originally as u64. To
compatible with arm32, this patch change them to "void __iomem *" type.

Signed-off-by: Eric Gao <eric.gao at rock-chips.com>

---

Changes in v1:
-Change the address base variable to uintptr_t type.

 drivers/video/rockchip/rk_mipi.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/video/rockchip/rk_mipi.c b/drivers/video/rockchip/rk_mipi.c
index ad00397..a9522ce 100644
--- a/drivers/video/rockchip/rk_mipi.c
+++ b/drivers/video/rockchip/rk_mipi.c
@@ -40,7 +40,7 @@ DECLARE_GLOBAL_DATA_PTR;
  * @txesc_clk: clock for tx esc mode
  */
 struct rk_mipi_priv {
-	void __iomem *regs;
+	uintptr_t *regs;
 	struct rk3399_grf_regs *grf;
 	struct udevice *panel;
 	struct mipi_dsi *dsi;
@@ -76,13 +76,13 @@ static int rk_mipi_read_timing(struct udevice *dev,
  *        use define in rk_mipi.h directly for this parameter
  *  @val: value that will be write to specified bits of register
  */
-static void rk_mipi_dsi_write(u32 regs, u32 reg, u32 val)
+static void rk_mipi_dsi_write(uintptr_t *regs, u32 reg, u32 val)
 {
 	u32 dat;
 	u32 mask;
 	u32 offset = (reg >> OFFSET_SHIFT) & 0xff;
 	u32 bits = (reg >> BITS_SHIFT) & 0xff;
-	u64 addr = (reg >> ADDR_SHIFT) + regs;
+	uintptr_t *addr = (reg >> ADDR_SHIFT) + regs;
 
 	/* Mask for specifiled bits,the corresponding bits will be clear */
 	mask = ~((0xffffffff << offset) & (0xffffffff >> (32 - offset - bits)));
@@ -108,7 +108,7 @@ static int rk_mipi_dsi_enable(struct udevice *dev,
 	int node, timing_node;
 	int val;
 	struct rk_mipi_priv *priv = dev_get_priv(dev);
-	u64 regs = (u64)priv->regs;
+	uintptr_t *regs = priv->regs;
 	struct display_plat *disp_uc_plat = dev_get_uclass_platdata(dev);
 	u32 txbyte_clk = priv->txbyte_clk;
 	u32 txesc_clk = priv->txesc_clk;
@@ -224,7 +224,7 @@ static int rk_mipi_dsi_enable(struct udevice *dev,
 }
 
 /* rk mipi dphy write function. It is used to write test data to dphy */
-static void rk_mipi_phy_write(u32 regs, unsigned char test_code,
+static void rk_mipi_phy_write(uintptr_t *regs, unsigned char test_code,
 			      unsigned char *test_data, unsigned char size)
 {
 	int i = 0;
@@ -253,7 +253,7 @@ static int rk_mipi_phy_enable(struct udevice *dev)
 {
 	int i;
 	struct rk_mipi_priv *priv = dev_get_priv(dev);
-	u64 regs = (u64)priv->regs;
+	uintptr_t *regs = priv->regs;
 	u64 fbdiv;
 	u64 prediv = 1;
 	u32 max_fbdiv = 512;
-- 
1.9.1




More information about the U-Boot mailing list