[U-Boot] [PATCH 1/3] controlcenterd_36BIT_SDCARD: Fix unused variable warning

[Tom Rini]

On the controlcenterd_36BIT_SDCARD config we get a warning about
prg_stage1_prepare being unused.  Move the declaration closer to usage
and hide under the existing #if tests.

Cc: Dirk Eibach <eibach at gdsys.de>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 board/gdsys/p1022/controlcenterd-id.c | 27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/board/gdsys/p1022/controlcenterd-id.c b/board/gdsys/p1022/controlcenterd-id.c
index db8a91756373..95f11fb69f36 100644
--- a/board/gdsys/p1022/controlcenterd-id.c
+++ b/board/gdsys/p1022/controlcenterd-id.c
@@ -142,20 +142,6 @@ static int hre_err = HRE_E_OK;
 #define IS_VAR_HREG(spec) (((spec) & 0x38) == 0x10)
 #define HREG_IDX(spec) ((spec) & (IS_PCR_HREG(spec) ? 0x1f : 0x7))
 
-
-static const uint8_t prg_stage1_prepare[] = {
-	0x00, 0x20, 0x00, 0x00, /* opcode: SYNC f0 */
-	0x00, 0x24, 0x00, 0x00, /* opcode: SYNC f1 */
-	0x01, 0x80, 0x00, 0x00, /* opcode: CHECK0 PCR0 */
-	0x81, 0x22, 0x00, 0x00, /* opcode: LOAD PCR0, f0 */
-	0x01, 0x84, 0x00, 0x00, /* opcode: CHECK0 PCR1 */
-	0x81, 0x26, 0x10, 0x00, /* opcode: LOAD PCR1, f1 */
-	0x01, 0x88, 0x00, 0x00, /* opcode: CHECK0 PCR2 */
-	0x81, 0x2a, 0x20, 0x00, /* opcode: LOAD PCR2, f2 */
-	0x01, 0x8c, 0x00, 0x00, /* opcode: CHECK0 PCR3 */
-	0x81, 0x2e, 0x30, 0x00, /* opcode: LOAD PCR3, f3 */
-};
-
 static const uint8_t vendor[] = "Guntermann & Drunck";
 
 /**
@@ -931,6 +917,19 @@ end:
 #endif
 
 #if defined(CCDM_FIRST_STAGE) || (defined CCDM_AUTO_FIRST_STAGE)
+static const uint8_t prg_stage1_prepare[] = {
+	0x00, 0x20, 0x00, 0x00, /* opcode: SYNC f0 */
+	0x00, 0x24, 0x00, 0x00, /* opcode: SYNC f1 */
+	0x01, 0x80, 0x00, 0x00, /* opcode: CHECK0 PCR0 */
+	0x81, 0x22, 0x00, 0x00, /* opcode: LOAD PCR0, f0 */
+	0x01, 0x84, 0x00, 0x00, /* opcode: CHECK0 PCR1 */
+	0x81, 0x26, 0x10, 0x00, /* opcode: LOAD PCR1, f1 */
+	0x01, 0x88, 0x00, 0x00, /* opcode: CHECK0 PCR2 */
+	0x81, 0x2a, 0x20, 0x00, /* opcode: LOAD PCR2, f2 */
+	0x01, 0x8c, 0x00, 0x00, /* opcode: CHECK0 PCR3 */
+	0x81, 0x2e, 0x30, 0x00, /* opcode: LOAD PCR3, f3 */
+};
+
 static int first_stage_actions(void)
 {
 	int result = 0;
-- 
1.9.1