[U-Boot] at91: smartweb board fails with current HEAD

[Heiko Schocher]

Hello Wenyou,

since your patch:

commit f8b7fff1d5c5297d290acab1e398bd410b0c2e68
Author: Wenyou Yang <wenyou.yang at atmel.com>
Date:   Fri Apr 14 15:01:28 2017 +0800

     serial: atmel_usart: Add clk support

smartweb board fails booting (and I fear at last all other at91 based
siemens boards also). Reverting your patch and U-Boot boots fine again.

First problem is, that I need now a bigger MALLOC_F_LEN space, but the
value is for SPL and U-Boot ... but in SPL I cannot increase this value,
as I have only 4k init ram.

So I need to configure a lower value in SPL as in U-Boot ... this is not
possible at the moment... or?

Second problem: init of the uart seems to go now wrong, I have to add
this patch:

pollux:u-boot-at91sam9g45 hs [master] $ git diff
diff --git a/arch/arm/dts/at91sam9260-smartweb.dts b/arch/arm/dts/at91sam9260-smartweb.dts
index faed763..e59781b 100644
--- a/arch/arm/dts/at91sam9260-smartweb.dts
+++ b/arch/arm/dts/at91sam9260-smartweb.dts
@@ -18,6 +18,7 @@
         compatible = "atmel,at91sam9260", "atmel,at91sam9";

         chosen {
+               u-boot,dm-pre-reloc;
                 stdout-path = &dbgu;
         };

@@ -48,6 +49,7 @@
                         };

                         dbgu: serial at fffff200 {
+                               u-boot,dm-pre-reloc;
                                 status = "okay";
                         };

diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig
index 48c8781..a769fc5 100644
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -7,6 +7,7 @@ CONFIG_TARGET_SMARTWEB=y
  CONFIG_SPL_GPIO_SUPPORT=y
  CONFIG_SPL_LIBCOMMON_SUPPORT=y
  CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
  CONFIG_SPL_NAND_SUPPORT=y
  CONFIG_DEFAULT_DEVICE_TREE="at91sam9260-smartweb"
  CONFIG_FIT=y
@@ -33,6 +34,8 @@ CONFIG_CMD_FAT=y
  # CONFIG_DOS_PARTITION is not set
  CONFIG_OF_CONTROL=y
  CONFIG_OF_EMBED=y
+CONFIG_CLK=y
+CONFIG_CLK_AT91=y
  CONFIG_DFU_NAND=y
  # CONFIG_MMC is not set
  CONFIG_USB=y

May the other (none atmel) at91 based boards needs similiar fixes?

Any hint is welcome.

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany