[U-Boot] [PATCH 0/1] Set VLD04 output to 2.8V in PMIC initialization.

Gautam Bhat mindentropy at gmail.com
Wed Jun 21 16:18:26 UTC 2017


This change sets the VLDO4 settings output to 2.8V in PMIC
initialization. I accidentally noticed this when I was testing
the DSI voltage input which was 3.3V. Not setting the proper voltage
can harm some of the voltage sensitive peripheral.


Gautam Bhat (1):
  Set VLD04 output to 2.8V in PMIC initialization.

 board/freescale/mx7dsabresd/mx7dsabresd.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

-- 
2.11.0



More information about the U-Boot mailing list