[U-Boot] [PATCH v2 02/18] usb: xhci: Correct command TRB 4th dword initialization

[Bin Meng]

In xhci_queue_command(), when the command is not 'reset endpoint',
'stop endpoint' or 'set TR dequeue pointer', endpoint ID should not
be encoded in the TRB.

Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Stefan Roese <sr at denx.de>
Tested-by: Stefan Roese <sr at denx.de>
---

Changes in v2: None

 drivers/usb/host/xhci-ring.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 2675a8f..579e670 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -280,8 +280,15 @@ void xhci_queue_command(struct xhci_ctrl *ctrl, u8 *ptr, u32 slot_id,
 	fields[0] = lower_32_bits(val_64);
 	fields[1] = upper_32_bits(val_64);
 	fields[2] = 0;
-	fields[3] = TRB_TYPE(cmd) | EP_ID_FOR_TRB(ep_index) |
-		    SLOT_ID_FOR_TRB(slot_id) | ctrl->cmd_ring->cycle_state;
+	fields[3] = TRB_TYPE(cmd) | SLOT_ID_FOR_TRB(slot_id) |
+		    ctrl->cmd_ring->cycle_state;
+
+	/*
+	 * Only 'reset endpoint', 'stop endpoint' and 'set TR dequeue pointer'
+	 * commands need endpoint id encoded.
+	 */
+	if (cmd >= TRB_RESET_EP && cmd <= TRB_SET_DEQ)
+		fields[3] |= EP_ID_FOR_TRB(ep_index);
 
 	queue_trb(ctrl, ctrl->cmd_ring, false, fields);
 
-- 
2.9.2