[U-Boot] [U-Boot,v2,2/7] rockchip: rk322x: add clock driver
Philipp Tomsich
philipp.tomsich at theobroma-systems.com
Sat Jun 24 10:14:33 UTC 2017
Kever,
On Fri, 23 Jun 2017, Kever Yang wrote:
> Add clock driver init support for:
> - cpu, bus clock init;
> - emmc, sdmmc clock;
> - ddr clock;
>
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> Reviewed-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> ---
>
> Changes in v2:
> - update copyright
> - fix typo
>
> arch/arm/include/asm/arch-rockchip/cru_rk322x.h | 215 ++++++++++++
> drivers/clk/rockchip/Makefile | 1 +
> drivers/clk/rockchip/clk_rk322x.c | 413 ++++++++++++++++++++++++
> 3 files changed, 629 insertions(+)
> create mode 100644 arch/arm/include/asm/arch-rockchip/cru_rk322x.h
> create mode 100644 drivers/clk/rockchip/clk_rk322x.c
>
> diff --git a/arch/arm/include/asm/arch-rockchip/cru_rk322x.h b/arch/arm/include/asm/arch-rockchip/cru_rk322x.h
> new file mode 100644
> index 0000000..2a2f804
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-rockchip/cru_rk322x.h
> @@ -0,0 +1,215 @@
> +/*
> + * (C) Copyright 2017 Rockchip Electronics Co., Ltd.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +#ifndef _ASM_ARCH_CRU_RK322X_H
> +#define _ASM_ARCH_CRU_RK322X_H
> +
> +#include <common.h>
> +
> +#define MHz 1000000
> +#define OSC_HZ (24 * MHz)
> +
> +#define APLL_HZ (600 * MHz)
> +#define GPLL_HZ (594 * MHz)
> +
> +#define CORE_PERI_HZ 150000000
> +#define CORE_ACLK_HZ 300000000
> +
> +#define BUS_ACLK_HZ 148500000
> +#define BUS_HCLK_HZ 148500000
> +#define BUS_PCLK_HZ 74250000
> +
> +#define PERI_ACLK_HZ 148500000
> +#define PERI_HCLK_HZ 148500000
> +#define PERI_PCLK_HZ 74250000
> +
> +/* Private data for the clock driver - used by rockchip_get_cru() */
> +struct rk322x_clk_priv {
> + struct rk322x_cru *cru;
> + ulong rate;
> +};
> +
> +struct rk322x_cru {
> + struct rk322x_pll {
> + unsigned int con0;
> + unsigned int con1;
> + unsigned int con2;
> + } pll[4];
> + unsigned int reserved0[4];
> + unsigned int cru_mode_con;
> + unsigned int cru_clksel_con[35];
> + unsigned int cru_clkgate_con[16];
> + unsigned int cru_softrst_con[9];
> + unsigned int cru_misc_con;
> + unsigned int reserved1[2];
> + unsigned int cru_glb_cnt_th;
> + unsigned int reserved2[3];
> + unsigned int cru_glb_rst_st;
> + unsigned int reserved3[(0x1c0 - 0x150) / 4 - 1];
> + unsigned int cru_sdmmc_con[2];
> + unsigned int cru_sdio_con[2];
> + unsigned int reserved4[2];
> + unsigned int cru_emmc_con[2];
> + unsigned int reserved5[4];
> + unsigned int cru_glb_srst_fst_value;
> + unsigned int cru_glb_srst_snd_value;
> + unsigned int cru_pll_mask_con;
> +};
> +check_member(rk322x_cru, cru_pll_mask_con, 0x01f8);
> +
> +struct pll_div {
> + u32 refdiv;
> + u32 fbdiv;
> + u32 postdiv1;
> + u32 postdiv2;
> + u32 frac;
> +};
> +
> +enum {
> + /* PLLCON0*/
> + PLL_BP_SHIFT = 15,
> + PLL_POSTDIV1_SHIFT = 12,
> + PLL_POSTDIV1_MASK = 7 << PLL_POSTDIV1_SHIFT,
> + PLL_FBDIV_SHIFT = 0,
> + PLL_FBDIV_MASK = 0xfff,
> +
> + /* PLLCON1 */
> + PLL_RST_SHIFT = 14,
> + PLL_PD_SHIFT = 13,
> + PLL_PD_MASK = 1 << PLL_PD_SHIFT,
> + PLL_DSMPD_SHIFT = 12,
> + PLL_DSMPD_MASK = 1 << PLL_DSMPD_SHIFT,
> + PLL_LOCK_STATUS_SHIFT = 10,
> + PLL_LOCK_STATUS_MASK = 1 << PLL_LOCK_STATUS_SHIFT,
> + PLL_POSTDIV2_SHIFT = 6,
> + PLL_POSTDIV2_MASK = 7 << PLL_POSTDIV2_SHIFT,
> + PLL_REFDIV_SHIFT = 0,
> + PLL_REFDIV_MASK = 0x3f,
> +
> + /* CRU_MODE */
> + GPLL_MODE_SHIFT = 12,
> + GPLL_MODE_MASK = 1 << GPLL_MODE_SHIFT,
> + GPLL_MODE_SLOW = 0,
> + GPLL_MODE_NORM,
> + CPLL_MODE_SHIFT = 8,
> + CPLL_MODE_MASK = 1 << CPLL_MODE_SHIFT,
> + CPLL_MODE_SLOW = 0,
> + CPLL_MODE_NORM,
> + DPLL_MODE_SHIFT = 4,
> + DPLL_MODE_MASK = 1 << DPLL_MODE_SHIFT,
> + DPLL_MODE_SLOW = 0,
> + DPLL_MODE_NORM,
> + APLL_MODE_SHIFT = 0,
> + APLL_MODE_MASK = 1 << APLL_MODE_SHIFT,
> + APLL_MODE_SLOW = 0,
> + APLL_MODE_NORM,
> +
> + /* CRU_CLK_SEL0_CON */
> + BUS_ACLK_PLL_SEL_SHIFT = 13,
> + BUS_ACLK_PLL_SEL_MASK = 3 << BUS_ACLK_PLL_SEL_SHIFT,
> + BUS_ACLK_PLL_SEL_APLL = 0,
> + BUS_ACLK_PLL_SEL_GPLL,
> + BUS_ACLK_PLL_SEL_HDMIPLL,
> + BUS_ACLK_DIV_SHIFT = 8,
> + BUS_ACLK_DIV_MASK = 0x1f << BUS_ACLK_DIV_SHIFT,
> + CORE_CLK_PLL_SEL_SHIFT = 6,
> + CORE_CLK_PLL_SEL_MASK = 3 << CORE_CLK_PLL_SEL_SHIFT,
> + CORE_CLK_PLL_SEL_APLL = 0,
> + CORE_CLK_PLL_SEL_GPLL,
> + CORE_CLK_PLL_SEL_DPLL,
> + CORE_DIV_CON_SHIFT = 0,
> + CORE_DIV_CON_MASK = 0x1f << CORE_DIV_CON_SHIFT,
> +
> + /* CRU_CLK_SEL1_CON */
> + BUS_PCLK_DIV_SHIFT = 12,
> + BUS_PCLK_DIV_MASK = 7 << BUS_PCLK_DIV_SHIFT,
> + BUS_HCLK_DIV_SHIFT = 8,
> + BUS_HCLK_DIV_MASK = 3 << BUS_HCLK_DIV_SHIFT,
> + CORE_ACLK_DIV_SHIFT = 4,
> + CORE_ACLK_DIV_MASK = 7 << CORE_ACLK_DIV_SHIFT,
> + CORE_PERI_DIV_SHIFT = 0,
> + CORE_PERI_DIV_MASK = 0xf << CORE_PERI_DIV_SHIFT,
> +
> + /* CRU_CLKSEL5_CON */
> + GMAC_OUT_PLL_SHIFT = 15,
> + GMAC_OUT_PLL_MASK = 1 << GMAC_OUT_PLL_SHIFT,
> + GMAC_OUT_DIV_SHIFT = 8,
> + GMAC_OUT_DIV_MASK = 0x1f << GMAC_OUT_DIV_SHIFT,
> + MAC_PLL_SEL_SHIFT = 7,
> + MAC_PLL_SEL_MASK = 1 << MAC_PLL_SEL_SHIFT,
> + RMII_EXTCLK_SLE_SHIFT = 5,
> + RMII_EXTCLK_SEL_MASK = 1 << RMII_EXTCLK_SLE_SHIFT,
> + RMII_EXTCLK_SEL_INT = 0,
> + RMII_EXTCLK_SEL_EXT,
> + CLK_MAC_DIV_SHIFT = 0,
> + CLK_MAC_DIV_MASK = 0x1f << CLK_MAC_DIV_SHIFT,
> +
> + /* CRU_CLKSEL10_CON */
> + PERI_PCLK_DIV_SHIFT = 12,
> + PERI_PCLK_DIV_MASK = 7 << PERI_PCLK_DIV_SHIFT,
> + PERI_PLL_SEL_SHIFT = 10,
> + PERI_PLL_SEL_MASK = 3 << PERI_PLL_SEL_SHIFT,
> + PERI_PLL_CPLL = 0,
> + PERI_PLL_GPLL,
> + PERI_PLL_HDMIPLL,
> + PERI_HCLK_DIV_SHIFT = 8,
> + PERI_HCLK_DIV_MASK = 3 << PERI_HCLK_DIV_SHIFT,
> + PERI_ACLK_DIV_SHIFT = 0,
> + PERI_ACLK_DIV_MASK = 0x1f << PERI_ACLK_DIV_SHIFT,
> +
> + /* CRU_CLKSEL11_CON */
> + EMMC_PLL_SHIFT = 12,
> + EMMC_PLL_MASK = 3 << EMMC_PLL_SHIFT,
> + EMMC_SEL_APLL = 0,
> + EMMC_SEL_DPLL,
> + EMMC_SEL_GPLL,
> + EMMC_SEL_24M,
> + SDIO_PLL_SHIFT = 10,
> + SDIO_PLL_MASK = 3 << SDIO_PLL_SHIFT,
> + SDIO_SEL_APLL = 0,
> + SDIO_SEL_DPLL,
> + SDIO_SEL_GPLL,
> + SDIO_SEL_24M,
> + MMC0_PLL_SHIFT = 8,
> + MMC0_PLL_MASK = 3 << MMC0_PLL_SHIFT,
> + MMC0_SEL_APLL = 0,
> + MMC0_SEL_DPLL,
> + MMC0_SEL_GPLL,
> + MMC0_SEL_24M,
> + MMC0_DIV_SHIFT = 0,
> + MMC0_DIV_MASK = 0xff << MMC0_DIV_SHIFT,
> +
> + /* CRU_CLKSEL12_CON */
> + EMMC_DIV_SHIFT = 8,
> + EMMC_DIV_MASK = 0xff << EMMC_DIV_SHIFT,
> + SDIO_DIV_SHIFT = 0,
> + SDIO_DIV_MASK = 0xff << SDIO_DIV_SHIFT,
> +
> + /* CRU_CLKSEL26_CON */
> + DDR_CLK_PLL_SEL_SHIFT = 8,
> + DDR_CLK_PLL_SEL_MASK = 3 << DDR_CLK_PLL_SEL_SHIFT,
> + DDR_CLK_SEL_DPLL = 0,
> + DDR_CLK_SEL_GPLL,
> + DDR_CLK_SEL_APLL,
> + DDR_DIV_SEL_SHIFT = 0,
> + DDR_DIV_SEL_MASK = 3 << DDR_DIV_SEL_SHIFT,
> +
> + /* CRU_CLKSEL27_CON */
> + VOP_DCLK_DIV_SHIFT = 8,
> + VOP_DCLK_DIV_MASK = 0xff << VOP_DCLK_DIV_SHIFT,
> + VOP_PLL_SEL_SHIFT = 1,
> + VOP_PLL_SEL_MASK = 1 << VOP_PLL_SEL_SHIFT,
> +
> + /* CRU_CLKSEL29_CON */
> + GMAC_CLK_SRC_SHIFT = 12,
> + GMAC_CLK_SRC_MASK = 1 << GMAC_CLK_SRC_SHIFT,
> +
> + /* CRU_SOFTRST5_CON */
> + DDRCTRL_PSRST_SHIFT = 11,
> + DDRCTRL_SRST_SHIFT = 10,
> + DDRPHY_PSRST_SHIFT = 9,
> + DDRPHY_SRST_SHIFT = 8,
> +};
> +#endif
> diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
> index e404c0c..c50aff2 100644
> --- a/drivers/clk/rockchip/Makefile
> +++ b/drivers/clk/rockchip/Makefile
> @@ -6,6 +6,7 @@
>
> obj-$(CONFIG_ROCKCHIP_RK3036) += clk_rk3036.o
> obj-$(CONFIG_ROCKCHIP_RK3188) += clk_rk3188.o
> +obj-$(CONFIG_ROCKCHIP_RK322X) += clk_rk322x.o
> obj-$(CONFIG_ROCKCHIP_RK3288) += clk_rk3288.o
> obj-$(CONFIG_ROCKCHIP_RK3328) += clk_rk3328.o
> obj-$(CONFIG_ROCKCHIP_RK3368) += clk_rk3368.o
> diff --git a/drivers/clk/rockchip/clk_rk322x.c b/drivers/clk/rockchip/clk_rk322x.c
> new file mode 100644
> index 0000000..3dcda45
> --- /dev/null
> +++ b/drivers/clk/rockchip/clk_rk322x.c
> @@ -0,0 +1,413 @@
> +/*
> + * (C) Copyright 2017 Rockchip Electronics Co., Ltd
> + *
> + * SPDX-License-Identifier: GPL-2.0
> + */
> +
> +#include <common.h>
> +#include <clk-uclass.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <syscon.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/cru_rk322x.h>
> +#include <asm/arch/hardware.h>
> +#include <dm/lists.h>
> +#include <dt-bindings/clock/rk3228-cru.h>
> +#include <linux/log2.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +enum {
> + VCO_MAX_HZ = 3200U * 1000000,
> + VCO_MIN_HZ = 800 * 1000000,
> + OUTPUT_MAX_HZ = 3200U * 1000000,
> + OUTPUT_MIN_HZ = 24 * 1000000,
> +};
> +
> +#define RATE_TO_DIV(input_rate, output_rate) \
> + ((input_rate) / (output_rate) - 1);
> +
> +#define DIV_TO_RATE(input_rate, div) ((input_rate) / ((div) + 1))
> +
> +#define PLL_DIVISORS(hz, _refdiv, _postdiv1, _postdiv2) {\
> + .refdiv = _refdiv,\
> + .fbdiv = (u32)((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ), \
> + .postdiv1 = _postdiv1, .postdiv2 = _postdiv2};\
> + _Static_assert(((u64)hz * _refdiv * _postdiv1 * _postdiv2 / OSC_HZ) * \
> + OSC_HZ / (_refdiv * _postdiv1 * _postdiv2) == hz, \
> + #hz "Hz cannot be hit with PLL "\
> + "divisors on line " __stringify(__LINE__));
> +
> +/* use integer mode*/
> +static const struct pll_div apll_init_cfg = PLL_DIVISORS(APLL_HZ, 1, 3, 1);
> +static const struct pll_div gpll_init_cfg = PLL_DIVISORS(GPLL_HZ, 2, 2, 1);
> +
> +static int rkclk_set_pll(struct rk322x_cru *cru, enum rk_clk_id clk_id,
> + const struct pll_div *div)
> +{
> + int pll_id = rk_pll_id(clk_id);
> + struct rk322x_pll *pll = &cru->pll[pll_id];
> +
> + /* All PLLs have same VCO and output frequency range restrictions. */
> + uint vco_hz = OSC_HZ / 1000 * div->fbdiv / div->refdiv * 1000;
> + uint output_hz = vco_hz / div->postdiv1 / div->postdiv2;
> +
> + debug("PLL at %x: fb=%d, ref=%d, pst1=%d, pst2=%d, vco=%u Hz, output=%u Hz\n",
> + pll, div->fbdiv, div->refdiv, div->postdiv1,
> + div->postdiv2, vco_hz, output_hz);
This generates a new build-warning when applied:
../drivers/clk/rockchip/clk_rk322x.c: In function 'rkclk_set_pll':
../drivers/clk/rockchip/clk_rk322x.c:57:2: warning: format '%x' expects
argument of type 'unsigned int', but argument 2 has type 'struct
rk322x_pll *' [-Wformat=]
debug("PLL at %x: fb=%d, ref=%d, pst1=%d, pst2=%d, vco=%u Hz, output=%u
Hz\n",
^
> + assert(vco_hz >= VCO_MIN_HZ && vco_hz <= VCO_MAX_HZ &&
> + output_hz >= OUTPUT_MIN_HZ && output_hz <= OUTPUT_MAX_HZ);
> +
> + /* use integer mode */
> + rk_setreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
> + /* Power down */
> + rk_setreg(&pll->con1, 1 << PLL_PD_SHIFT);
> +
> + rk_clrsetreg(&pll->con0,
> + PLL_POSTDIV1_MASK | PLL_FBDIV_MASK,
> + (div->postdiv1 << PLL_POSTDIV1_SHIFT) | div->fbdiv);
> + rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK | PLL_REFDIV_MASK,
> + (div->postdiv2 << PLL_POSTDIV2_SHIFT |
> + div->refdiv << PLL_REFDIV_SHIFT));
> +
> + /* Power Up */
> + rk_clrreg(&pll->con1, 1 << PLL_PD_SHIFT);
> +
> + /* waiting for pll lock */
> + while (readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT))
> + udelay(1);
> +
> + return 0;
> +}
> +
> +static void rkclk_init(struct rk322x_cru *cru)
> +{
> + u32 aclk_div;
> + u32 hclk_div;
> + u32 pclk_div;
> +
> + /* pll enter slow-mode */
> + rk_clrsetreg(&cru->cru_mode_con,
> + GPLL_MODE_MASK | APLL_MODE_MASK,
> + GPLL_MODE_SLOW << GPLL_MODE_SHIFT |
> + APLL_MODE_SLOW << APLL_MODE_SHIFT);
> +
> + /* init pll */
> + rkclk_set_pll(cru, CLK_ARM, &apll_init_cfg);
> + rkclk_set_pll(cru, CLK_GENERAL, &gpll_init_cfg);
> +
> + /*
> + * select apll as cpu/core clock pll source and
> + * set up dependent divisors for PERI and ACLK clocks.
> + * core hz : apll = 1:1
> + */
> + aclk_div = APLL_HZ / CORE_ACLK_HZ - 1;
> + assert((aclk_div + 1) * CORE_ACLK_HZ == APLL_HZ && aclk_div < 0x7);
> +
> + pclk_div = APLL_HZ / CORE_PERI_HZ - 1;
> + assert((pclk_div + 1) * CORE_PERI_HZ == APLL_HZ && pclk_div < 0xf);
> +
> + rk_clrsetreg(&cru->cru_clksel_con[0],
> + CORE_CLK_PLL_SEL_MASK | CORE_DIV_CON_MASK,
> + CORE_CLK_PLL_SEL_APLL << CORE_CLK_PLL_SEL_SHIFT |
> + 0 << CORE_DIV_CON_SHIFT);
> +
> + rk_clrsetreg(&cru->cru_clksel_con[1],
> + CORE_ACLK_DIV_MASK | CORE_PERI_DIV_MASK,
> + aclk_div << CORE_ACLK_DIV_SHIFT |
> + pclk_div << CORE_PERI_DIV_SHIFT);
> +
> + /*
> + * select apll as pd_bus bus clock source and
> + * set up dependent divisors for PCLK/HCLK and ACLK clocks.
> + */
> + aclk_div = GPLL_HZ / BUS_ACLK_HZ - 1;
> + assert((aclk_div + 1) * BUS_ACLK_HZ == GPLL_HZ && aclk_div <= 0x1f);
> +
> + pclk_div = GPLL_HZ / BUS_PCLK_HZ - 1;
> + assert((pclk_div + 1) * BUS_PCLK_HZ == GPLL_HZ && pclk_div <= 0x7);
> +
> + hclk_div = GPLL_HZ / BUS_HCLK_HZ - 1;
> + assert((hclk_div + 1) * BUS_HCLK_HZ == GPLL_HZ && hclk_div <= 0x3);
> +
> + rk_clrsetreg(&cru->cru_clksel_con[0],
> + BUS_ACLK_PLL_SEL_MASK | BUS_ACLK_DIV_MASK,
> + BUS_ACLK_PLL_SEL_GPLL << BUS_ACLK_PLL_SEL_SHIFT |
> + aclk_div << BUS_ACLK_DIV_SHIFT);
> +
> + rk_clrsetreg(&cru->cru_clksel_con[1],
> + BUS_PCLK_DIV_MASK | BUS_HCLK_DIV_MASK,
> + pclk_div << BUS_PCLK_DIV_SHIFT |
> + hclk_div << BUS_HCLK_DIV_SHIFT);
> +
> + /*
> + * select gpll as pd_peri bus clock source and
> + * set up dependent divisors for PCLK/HCLK and ACLK clocks.
> + */
> + aclk_div = GPLL_HZ / PERI_ACLK_HZ - 1;
> + assert((aclk_div + 1) * PERI_ACLK_HZ == GPLL_HZ && aclk_div < 0x1f);
> +
> + hclk_div = ilog2(PERI_ACLK_HZ / PERI_HCLK_HZ);
> + assert((1 << hclk_div) * PERI_HCLK_HZ ==
> + PERI_ACLK_HZ && (hclk_div < 0x4));
> +
> + pclk_div = ilog2(PERI_ACLK_HZ / PERI_PCLK_HZ);
> + assert((1 << pclk_div) * PERI_PCLK_HZ ==
> + PERI_ACLK_HZ && pclk_div < 0x8);
> +
> + rk_clrsetreg(&cru->cru_clksel_con[10],
> + PERI_PLL_SEL_MASK | PERI_PCLK_DIV_MASK |
> + PERI_HCLK_DIV_MASK | PERI_ACLK_DIV_MASK,
> + PERI_PLL_GPLL << PERI_PLL_SEL_SHIFT |
> + pclk_div << PERI_PCLK_DIV_SHIFT |
> + hclk_div << PERI_HCLK_DIV_SHIFT |
> + aclk_div << PERI_ACLK_DIV_SHIFT);
> +
> + /* PLL enter normal-mode */
> + rk_clrsetreg(&cru->cru_mode_con,
> + GPLL_MODE_MASK | APLL_MODE_MASK,
> + GPLL_MODE_NORM << GPLL_MODE_SHIFT |
> + APLL_MODE_NORM << APLL_MODE_SHIFT);
> +}
> +
> +/* Get pll rate by id */
> +static uint32_t rkclk_pll_get_rate(struct rk322x_cru *cru,
> + enum rk_clk_id clk_id)
> +{
> + uint32_t refdiv, fbdiv, postdiv1, postdiv2;
> + uint32_t con;
> + int pll_id = rk_pll_id(clk_id);
> + struct rk322x_pll *pll = &cru->pll[pll_id];
> + static u8 clk_shift[CLK_COUNT] = {
> + 0xff, APLL_MODE_SHIFT, DPLL_MODE_SHIFT, 0xff,
> + GPLL_MODE_SHIFT, 0xff
> + };
> + static u32 clk_mask[CLK_COUNT] = {
> + 0xff, APLL_MODE_MASK, DPLL_MODE_MASK, 0xff,
> + GPLL_MODE_MASK, 0xff
> + };
> + uint shift;
> + uint mask;
> +
> + con = readl(&cru->cru_mode_con);
> + shift = clk_shift[clk_id];
> + mask = clk_mask[clk_id];
> +
> + switch ((con & mask) >> shift) {
> + case GPLL_MODE_SLOW:
> + return OSC_HZ;
> + case GPLL_MODE_NORM:
> +
> + /* normal mode */
> + con = readl(&pll->con0);
> + postdiv1 = (con & PLL_POSTDIV1_MASK) >> PLL_POSTDIV1_SHIFT;
> + fbdiv = (con & PLL_FBDIV_MASK) >> PLL_FBDIV_SHIFT;
> + con = readl(&pll->con1);
> + postdiv2 = (con & PLL_POSTDIV2_MASK) >> PLL_POSTDIV2_SHIFT;
> + refdiv = (con & PLL_REFDIV_MASK) >> PLL_REFDIV_SHIFT;
> + return (24 * fbdiv / (refdiv * postdiv1 * postdiv2)) * 1000000;
> + default:
> + return 32768;
> + }
> +}
> +
> +static ulong rockchip_mmc_get_clk(struct rk322x_cru *cru, uint clk_general_rate,
> + int periph)
> +{
> + uint src_rate;
> + uint div, mux;
> + u32 con;
> +
> + switch (periph) {
> + case HCLK_EMMC:
> + case SCLK_EMMC:
> + con = readl(&cru->cru_clksel_con[11]);
> + mux = (con & EMMC_PLL_MASK) >> EMMC_PLL_SHIFT;
> + con = readl(&cru->cru_clksel_con[12]);
> + div = (con & EMMC_DIV_MASK) >> EMMC_DIV_SHIFT;
> + break;
> + case HCLK_SDMMC:
> + case SCLK_SDMMC:
> + con = readl(&cru->cru_clksel_con[11]);
> + mux = (con & MMC0_PLL_MASK) >> MMC0_PLL_SHIFT;
> + div = (con & MMC0_DIV_MASK) >> MMC0_DIV_SHIFT;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + src_rate = mux == EMMC_SEL_24M ? OSC_HZ : clk_general_rate;
> + return DIV_TO_RATE(src_rate, div);
> +}
> +
> +static ulong rockchip_mmc_set_clk(struct rk322x_cru *cru, uint clk_general_rate,
> + int periph, uint freq)
> +{
> + int src_clk_div;
> + int mux;
> +
> + debug("%s: clk_general_rate=%u\n", __func__, clk_general_rate);
> +
> + /* mmc clock auto divide 2 in internal */
> + src_clk_div = (clk_general_rate / 2 + freq - 1) / freq;
> +
> + if (src_clk_div > 0x7f) {
> + src_clk_div = (OSC_HZ / 2 + freq - 1) / freq;
> + mux = EMMC_SEL_24M;
> + } else {
> + mux = EMMC_SEL_GPLL;
> + }
> +
> + switch (periph) {
> + case HCLK_EMMC:
> + case SCLK_EMMC:
> + rk_clrsetreg(&cru->cru_clksel_con[11],
> + EMMC_PLL_MASK,
> + mux << EMMC_PLL_SHIFT);
> + rk_clrsetreg(&cru->cru_clksel_con[12],
> + EMMC_DIV_MASK,
> + (src_clk_div - 1) << EMMC_DIV_SHIFT);
> + break;
> + case HCLK_SDMMC:
> + case SCLK_SDMMC:
> + rk_clrsetreg(&cru->cru_clksel_con[11],
> + MMC0_PLL_MASK | MMC0_DIV_MASK,
> + mux << MMC0_PLL_SHIFT |
> + (src_clk_div - 1) << MMC0_DIV_SHIFT);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return rockchip_mmc_get_clk(cru, clk_general_rate, periph);
> +}
> +
> +static int rk322x_ddr_set_clk(struct rk322x_cru *cru, unsigned int set_rate)
> +{
> + struct pll_div dpll_cfg;
> +
> + /* clk_ddrc == DPLL = 24MHz / refdiv * fbdiv / postdiv1 / postdiv2 */
> + switch (set_rate) {
> + case 400*MHz:
> + dpll_cfg = (struct pll_div)
> + {.refdiv = 1, .fbdiv = 50, .postdiv1 = 3, .postdiv2 = 1};
> + break;
> + case 600*MHz:
> + dpll_cfg = (struct pll_div)
> + {.refdiv = 1, .fbdiv = 75, .postdiv1 = 3, .postdiv2 = 1};
> + break;
> + case 800*MHz:
> + dpll_cfg = (struct pll_div)
> + {.refdiv = 1, .fbdiv = 100, .postdiv1 = 3, .postdiv2 = 1};
> + break;
> + }
> +
> + /* pll enter slow-mode */
> + rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK,
> + DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
> + rkclk_set_pll(cru, CLK_DDR, &dpll_cfg);
> + /* PLL enter normal-mode */
> + rk_clrsetreg(&cru->cru_mode_con, DPLL_MODE_MASK,
> + DPLL_MODE_NORM << DPLL_MODE_SHIFT);
> +
> + return set_rate;
> +}
> +static ulong rk322x_clk_get_rate(struct clk *clk)
> +{
> + struct rk322x_clk_priv *priv = dev_get_priv(clk->dev);
> + ulong rate, gclk_rate;
> +
> + gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
> + switch (clk->id) {
> + case 0 ... 63:
> + rate = rkclk_pll_get_rate(priv->cru, clk->id);
> + break;
> + case HCLK_EMMC:
> + case SCLK_EMMC:
> + case HCLK_SDMMC:
> + case SCLK_SDMMC:
> + rate = rockchip_mmc_get_clk(priv->cru, gclk_rate, clk->id);
> + break;
> + default:
> + return -ENOENT;
> + }
> +
> + return rate;
> +}
> +
> +static ulong rk322x_clk_set_rate(struct clk *clk, ulong rate)
> +{
> + struct rk322x_clk_priv *priv = dev_get_priv(clk->dev);
> + ulong new_rate, gclk_rate;
> +
> + gclk_rate = rkclk_pll_get_rate(priv->cru, CLK_GENERAL);
> + switch (clk->id) {
> + case HCLK_EMMC:
> + case SCLK_EMMC:
> + case HCLK_SDMMC:
> + case SCLK_SDMMC:
> + new_rate = rockchip_mmc_set_clk(priv->cru, gclk_rate,
> + clk->id, rate);
> + break;
> + case CLK_DDR:
> + new_rate = rk322x_ddr_set_clk(priv->cru, rate);
> + break;
> + default:
> + return -ENOENT;
> + }
> +
> + return new_rate;
> +}
> +
> +static struct clk_ops rk322x_clk_ops = {
> + .get_rate = rk322x_clk_get_rate,
> + .set_rate = rk322x_clk_set_rate,
> +};
> +
> +static int rk322x_clk_ofdata_to_platdata(struct udevice *dev)
> +{
> + struct rk322x_clk_priv *priv = dev_get_priv(dev);
> +
> + priv->cru = (struct rk322x_cru *)devfdt_get_addr(dev);
> +
> + return 0;
> +}
> +
> +static int rk322x_clk_probe(struct udevice *dev)
> +{
> + struct rk322x_clk_priv *priv = dev_get_priv(dev);
> +
> + rkclk_init(priv->cru);
> +
> + return 0;
> +}
> +
> +static int rk322x_clk_bind(struct udevice *dev)
> +{
> + int ret;
> +
> + /* The reset driver does not have a device node, so bind it here */
> + ret = device_bind_driver(gd->dm_root, "rk322x_sysreset", "reset", &dev);
> + if (ret)
> + debug("Warning: No RK3036 reset driver: ret=%d\n", ret);
> +
> + return 0;
> +}
> +
> +static const struct udevice_id rk322x_clk_ids[] = {
> + { .compatible = "rockchip,rk3228-cru" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(rockchip_rk322x_cru) = {
> + .name = "clk_rk322x",
> + .id = UCLASS_CLK,
> + .of_match = rk322x_clk_ids,
> + .priv_auto_alloc_size = sizeof(struct rk322x_clk_priv),
> + .ofdata_to_platdata = rk322x_clk_ofdata_to_platdata,
> + .ops = &rk322x_clk_ops,
> + .bind = rk322x_clk_bind,
> + .probe = rk322x_clk_probe,
> +};
>
Thanks,
Philipp.
More information about the U-Boot
mailing list