[U-Boot] [PATCH v2] rockchip: rk3288: Add pinctrl support for the gmac ethernet interface
Romain Perier
romain.perier at collabora.com
Mon Jun 26 08:01:46 UTC 2017
From: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
Add support for the gmac ethernet interface to pinctrl. This hardcodes
the setup to match that of the firefly and Radxa Rock2 boards, using the
RGMII phy mode for gmac interface and GPIO4B0 as the phy reset GPIO.
Signed-off-by: Sjoerd Simons <sjoerd.simons at collabora.co.uk>
Signed-off-by: Romain Perier <romain.perier at collabora.com>
---
Note: The patch has not been merged during the integration of the GMAC
driver. It fixes the ethernet 1gbs issue (caused by a drive length issue)
Changes in v2:
- Added Signed-off-by with my email
- Fixed coding style issues for GPIO_BIAS and GPIO_PULL
- Added missing space in comment
arch/arm/include/asm/arch-rockchip/grf_rk3288.h | 178 ++++++++++++++++++++++++
drivers/pinctrl/rockchip/pinctrl_rk3288.c | 118 ++++++++++++++++
2 files changed, 296 insertions(+)
diff --git a/arch/arm/include/asm/arch-rockchip/grf_rk3288.h b/arch/arm/include/asm/arch-rockchip/grf_rk3288.h
index fbc4a0d80f..818e4c5666 100644
--- a/arch/arm/include/asm/arch-rockchip/grf_rk3288.h
+++ b/arch/arm/include/asm/arch-rockchip/grf_rk3288.h
@@ -283,6 +283,163 @@ enum {
GPIO3C0_EMMC_CMD,
};
+/* GRF_GPIO3DL_IOMUX */
+enum {
+ GPIO3D3_SHIFT = 12,
+ GPIO3D3_MASK = 7,
+ GPIO3D3_GPIO = 0,
+ GPIO3D3_FLASH1_DATA3,
+ GPIO3D3_HOST_DOUT3,
+ GPIO3D3_MAC_RXD3,
+ GPIO3D3_SDIO1_DATA3,
+
+ GPIO3D2_SHIFT = 8,
+ GPIO3D2_MASK = 7,
+ GPIO3D2_GPIO = 0,
+ GPIO3D2_FLASH1_DATA2,
+ GPIO3D2_HOST_DOUT2,
+ GPIO3D2_MAC_RXD2,
+ GPIO3D2_SDIO1_DATA2,
+
+ GPIO3D1_SHIFT = 4,
+ GPIO3D1_MASK = 7,
+ GPIO3D1_GPIO = 0,
+ GPIO3DL1_FLASH1_DATA1,
+ GPIO3D1_HOST_DOUT1,
+ GPIO3D1_MAC_TXD3,
+ GPIO3D1_SDIO1_DATA1,
+
+ GPIO3D0_SHIFT = 0,
+ GPIO3D0_MASK = 7,
+ GPIO3D0_GPIO = 0,
+ GPIO3D0_FLASH1_DATA0,
+ GPIO3D0_HOST_DOUT0,
+ GPIO3D0_MAC_TXD2,
+ GPIO3D0_SDIO1_DATA0,
+};
+
+/* GRF_GPIO3HL_IOMUX */
+enum {
+ GPIO3D7_SHIFT = 12,
+ GPIO3D7_MASK = 7,
+ GPIO3D7_GPIO = 0,
+ GPIO3D7_FLASH1_DATA7,
+ GPIO3D7_HOST_DOUT7,
+ GPIO3D7_MAC_RXD1,
+ GPIO3D7_SDIO1_INTN,
+
+ GPIO3D6_SHIFT = 8,
+ GPIO3D6_MASK = 7,
+ GPIO3D6_GPIO = 0,
+ GPIO3D6_FLASH1_DATA6,
+ GPIO3D6_HOST_DOUT6,
+ GPIO3D6_MAC_RXD0,
+ GPIO3D6_SDIO1_BKPWR,
+
+ GPIO3D5_SHIFT = 4,
+ GPIO3D5_MASK = 7,
+ GPIO3D5_GPIO = 0,
+ GPIO3D5_FLASH1_DATA5,
+ GPIO3D5_HOST_DOUT5,
+ GPIO3D5_MAC_TXD1,
+ GPIO3D5_SDIO1_WRPRT,
+
+ GPIO3D4_SHIFT = 0,
+ GPIO3D4_MASK = 7,
+ GPIO3D4_GPIO = 0,
+ GPIO3D4_FLASH1_DATA4,
+ GPIO3D4_HOST_DOUT4,
+ GPIO3D4_MAC_TXD0,
+ GPIO3D4_SDIO1_DETECTN,
+};
+
+/* GRF_GPIO4AL_IOMUX */
+enum {
+ GPIO4A3_SHIFT = 12,
+ GPIO4A3_MASK = 7,
+ GPIO4A3_GPIO = 0,
+ GPIO4A3_FLASH1_ALE,
+ GPIO4A3_HOST_DOUT9,
+ GPIO4A3_MAC_CLK,
+ GPIO4A3_FLASH0_CSN6,
+
+ GPIO4A2_SHIFT = 8,
+ GPIO4A2_MASK = 7,
+ GPIO4A2_GPIO = 0,
+ GPIO4A2_FLASH1_RDN,
+ GPIO4A2_HOST_DOUT8,
+ GPIO4A2_MAC_RXER,
+ GPIO4A2_FLASH0_CSN5,
+
+ GPIO4A1_SHIFT = 4,
+ GPIO4A1_MASK = 7,
+ GPIO4A1_GPIO = 0,
+ GPIO4A1_FLASH1_WP,
+ GPIO4A1_HOST_CKOUTN,
+ GPIO4A1_MAC_TXDV,
+ GPIO4A1_FLASH0_CSN4,
+
+ GPIO4A0_SHIFT = 0,
+ GPIO4A0_MASK = 3,
+ GPIO4A0_GPIO = 0,
+ GPIO4A0_FLASH1_RDY,
+ GPIO4A0_HOST_CKOUTP,
+ GPIO4A0_MAC_MDC,
+};
+
+/* GRF_GPIO4AH_IOMUX */
+enum {
+ GPIO4A7_SHIFT = 12,
+ GPIO4A7_MASK = 7,
+ GPIO4A7_GPIO = 0,
+ GPIO4A7_FLASH1_CSN1,
+ GPIO4A7_HOST_DOUT13,
+ GPIO4A7_MAC_CSR,
+ GPIO4A7_SDIO1_CLKOUT,
+
+ GPIO4A6_SHIFT = 8,
+ GPIO4A6_MASK = 7,
+ GPIO4A6_GPIO = 0,
+ GPIO4A6_FLASH1_CSN0,
+ GPIO4A6_HOST_DOUT12,
+ GPIO4A6_MAC_RXCLK,
+ GPIO4A6_SDIO1_CMD,
+
+ GPIO4A5_SHIFT = 4,
+ GPIO4A5_MASK = 3,
+ GPIO4A5_GPIO = 0,
+ GPIO4A5_FLASH1_WRN,
+ GPIO4A5_HOST_DOUT11,
+ GPIO4A5_MAC_MDIO,
+
+ GPIO4A4_SHIFT = 0,
+ GPIO4A4_MASK = 7,
+ GPIO4A4_GPIO = 0,
+ GPIO4A4_FLASH1_CLE,
+ GPIO4A4_HOST_DOUT10,
+ GPIO4A4_MAC_TXEN,
+ GPIO4A4_FLASH0_CSN7,
+};
+
+/* GRF_GPIO4BL_IOMUX */
+enum {
+ GPIO4B1_SHIFT = 4,
+ GPIO4B1_MASK = 7,
+ GPIO4B1_GPIO = 0,
+ GPIO4B1_FLASH1_CSN2,
+ GPIO4B1_HOST_DOUT15,
+ GPIO4B1_MAC_TXCLK,
+ GPIO4B1_SDIO1_PWREN,
+
+ GPIO4B0_SHIFT = 0,
+ GPIO4B0_MASK = 7,
+ GPIO4B0_GPIO = 0,
+ GPIO4B0_FLASH1_DQS,
+ GPIO4B0_HOST_DOUT14,
+ GPIO4B0_MAC_COL,
+ GPIO4B0_FLASH1_CSN3,
+};
+
/* GRF_GPIO4C_IOMUX */
enum {
GPIO4C7_SHIFT = 14,
@@ -886,4 +1043,25 @@ enum GRF_SOC_CON8 {
RK3288_DPHY_TX0_TURNREQUEST_DIS = 0,
};
+/* GPIO Bias settings */
+enum GPIO_BIAS {
+ GPIO_BIAS_2MA = 0,
+ GPIO_BIAS_4MA,
+ GPIO_BIAS_8MA,
+ GPIO_BIAS_12MA,
+};
+
+#define GPIO_BIAS_MASK 0x3
+#define GPIO_BIAS_SHIFT(x) ((x) * 2)
+
+enum GPIO_PU_PD {
+ GPIO_PULL_NORMAL = 0,
+ GPIO_PULL_UP,
+ GPIO_PULL_DOWN,
+ GPIO_PULL_REPEAT,
+};
+
+#define GPIO_PULL_MASK 0x3
+#define GPIO_PULL_SHIFT(x) ((x) * 2)
+
#endif
diff --git a/drivers/pinctrl/rockchip/pinctrl_rk3288.c b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
index cb13d30da8..ab64056783 100644
--- a/drivers/pinctrl/rockchip/pinctrl_rk3288.c
+++ b/drivers/pinctrl/rockchip/pinctrl_rk3288.c
@@ -402,6 +402,119 @@ static void pinctrl_rk3288_sdmmc_config(struct rk3288_grf *grf, int mmc_id)
}
}
+static void pinctrl_rk3288_gmac_config(struct rk3288_grf *grf, int gmac_id)
+{
+ switch (gmac_id) {
+ case PERIPH_ID_GMAC:
+ rk_clrsetreg(&grf->gpio3dl_iomux,
+ GPIO3D3_MASK << GPIO3D3_SHIFT |
+ GPIO3D2_MASK << GPIO3D2_SHIFT |
+ GPIO3D2_MASK << GPIO3D1_SHIFT |
+ GPIO3D0_MASK << GPIO3D0_SHIFT,
+ GPIO3D3_MAC_RXD3 << GPIO3D3_SHIFT |
+ GPIO3D2_MAC_RXD2 << GPIO3D2_SHIFT |
+ GPIO3D1_MAC_TXD3 << GPIO3D1_SHIFT |
+ GPIO3D0_MAC_TXD2 << GPIO3D0_SHIFT);
+
+ rk_clrsetreg(&grf->gpio3dh_iomux,
+ GPIO3D7_MASK << GPIO3D7_SHIFT |
+ GPIO3D6_MASK << GPIO3D6_SHIFT |
+ GPIO3D5_MASK << GPIO3D5_SHIFT |
+ GPIO3D4_MASK << GPIO3D4_SHIFT,
+ GPIO3D7_MAC_RXD1 << GPIO3D7_SHIFT |
+ GPIO3D6_MAC_RXD0 << GPIO3D6_SHIFT |
+ GPIO3D5_MAC_TXD1 << GPIO3D5_SHIFT |
+ GPIO3D4_MAC_TXD0 << GPIO3D4_SHIFT);
+
+ /* switch the Tx pins to 12ma drive-strength */
+ rk_clrsetreg(&grf->gpio1_e[2][3],
+ GPIO_BIAS_MASK |
+ (GPIO_BIAS_MASK << GPIO_BIAS_SHIFT(1)) |
+ (GPIO_BIAS_MASK << GPIO_BIAS_SHIFT(4)) |
+ (GPIO_BIAS_MASK << GPIO_BIAS_SHIFT(5)),
+ (GPIO_BIAS_12MA << GPIO_BIAS_SHIFT(0)) |
+ (GPIO_BIAS_12MA << GPIO_BIAS_SHIFT(1)) |
+ (GPIO_BIAS_12MA << GPIO_BIAS_SHIFT(4)) |
+ (GPIO_BIAS_12MA << GPIO_BIAS_SHIFT(5)));
+
+ /* Set normal pull for all GPIO3D pins */
+ rk_clrsetreg(&grf->gpio1_p[2][3],
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(0)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(1)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(2)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(3)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(4)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(5)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(5)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(7)),
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(0)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(1)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(2)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(3)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(4)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(5)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(6)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(7)));
+
+ rk_clrsetreg(&grf->gpio4al_iomux,
+ GPIO4A3_MASK << GPIO4A3_SHIFT |
+ GPIO4A1_MASK << GPIO4A1_SHIFT |
+ GPIO4A0_MASK << GPIO4A0_SHIFT,
+ GPIO4A3_MAC_CLK << GPIO4A3_SHIFT |
+ GPIO4A1_MAC_TXDV << GPIO4A1_SHIFT |
+ GPIO4A0_MAC_MDC << GPIO4A0_SHIFT);
+
+ rk_clrsetreg(&grf->gpio4ah_iomux,
+ GPIO4A6_MASK << GPIO4A6_SHIFT |
+ GPIO4A5_MASK << GPIO4A5_SHIFT |
+ GPIO4A4_MASK << GPIO4A4_SHIFT,
+ GPIO4A6_MAC_RXCLK << GPIO4A6_SHIFT |
+ GPIO4A5_MAC_MDIO << GPIO4A5_SHIFT |
+ GPIO4A4_MAC_TXEN << GPIO4A4_SHIFT);
+
+ /* switch GPIO4A4 to 12ma drive-strength */
+ rk_clrsetreg(&grf->gpio1_e[3][0],
+ GPIO_BIAS_MASK << GPIO_BIAS_SHIFT(4),
+ GPIO_BIAS_12MA << GPIO_BIAS_SHIFT(4));
+
+ /* Set normal pull for all GPIO4A pins */
+ rk_clrsetreg(&grf->gpio1_p[3][0],
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(0)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(1)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(2)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(3)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(4)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(5)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(5)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(7)),
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(0)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(1)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(2)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(3)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(4)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(5)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(6)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(7)));
+
+ /* switch GPIO4B1 to 12ma drive-strength */
+ rk_clrsetreg(&grf->gpio1_e[3][1],
+ GPIO_BIAS_MASK << GPIO_BIAS_SHIFT(1),
+ GPIO_BIAS_12MA << GPIO_BIAS_SHIFT(1));
+
+ /* Set pull normal for GPIO4B1, pull up for GPIO4B0 */
+ rk_clrsetreg(&grf->gpio1_p[3][1],
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(0)) |
+ (GPIO_PULL_MASK << GPIO_PULL_SHIFT(1)),
+ (GPIO_PULL_UP << GPIO_PULL_SHIFT(0)) |
+ (GPIO_PULL_NORMAL << GPIO_PULL_SHIFT(1)));
+
+ break;
+ default:
+ printf("gmac id = %d iomux error!\n", gmac_id);
+ break;
+ }
+}
+
#ifndef CONFIG_SPL_BUILD
static void pinctrl_rk3288_hdmi_config(struct rk3288_grf *grf, int hdmi_id)
{
@@ -465,6 +578,9 @@ static int rk3288_pinctrl_request(struct udevice *dev, int func, int flags)
case PERIPH_ID_SDMMC1:
pinctrl_rk3288_sdmmc_config(priv->grf, func);
break;
+ case PERIPH_ID_GMAC:
+ pinctrl_rk3288_gmac_config(priv->grf, func);
+ break;
default:
return -EINVAL;
}
@@ -485,6 +601,8 @@ static int rk3288_pinctrl_get_periph_id(struct udevice *dev,
return -EINVAL;
switch (cell[1]) {
+ case 27:
+ return PERIPH_ID_GMAC;
case 44:
return PERIPH_ID_SPI0;
case 45:
--
2.11.0
More information about the U-Boot
mailing list