[U-Boot] [PATCH 10/16] usb: xhci: Program 'route string' in the input slot context

[Marek Vasut]

On 06/27/2017 10:27 AM, Bin Meng wrote:
> Hi Stefan,
> 
> On Tue, Jun 27, 2017 at 1:23 PM, Stefan Roese <sr at denx.de> wrote:
>> Hi Bin,
>>
>>
>> On 27.06.2017 02:01, Bin Meng wrote:
>>>
>>> On Tue, Jun 27, 2017 at 2:07 AM, Marek Vasut <marex at denx.de> wrote:
>>>>
>>>> On 06/24/2017 03:57 AM, Bin Meng wrote:
>>>>>
>>>>> Hi Marek,
>>>>>
>>>>> On Sat, Jun 24, 2017 at 2:02 AM, Marek Vasut <marex at denx.de> wrote:
>>>>>>
>>>>>> On 06/23/2017 11:54 AM, Bin Meng wrote:
>>>>>>>
>>>>>>> xHCI spec says: the values of the 'route string' field shall be
>>>>>>> initialized by the first 'Address Device' command issued to a
>>>>>>> device slot, and shall not be modified by any other command.
>>>>>>>
>>>>>>> So far U-Boot does not program this field, and it does not prevent
>>>>>>> SS device directly attached to root port, or HS device behind an HS
>>>>>>> hub, from working, due to the fact that 'route string' is used by
>>>>>>> the xHC to target SS packets. But in order to enumerate devices
>>>>>>> behind an SS hub, this field must be programmed.
>>>>>>>
>>>>>>> With this commit and along with previous commits, now SS & HS devices
>>>>>>> attached to a USB 3.0 hub can be enumerated by U-Boot.
>>>>>>>
>>>>>>> As usual, this new feature is only available when DM is on.
>>>>>>
>>>>>>
>>>>>> Great, but I really dislike the ifdef pollution, so this needs to be
>>>>>> sorted out.
>>>>>
>>>>>
>>>>> The ifdef was needed due to it calls DM APIs or access DM udevice. I
>>>>> have no intention to add a new feature to the non-DM driver.
>>>>
>>>>
>>>> But then this creates a massive disparity, it's like we're growing two
>>>> USB stacks.
>>>>
>>>
>>> Yep, unfortunately. But if we continue adding new features/fixes to
>>> the old non-DM stuff, I am not sure how this can encourage people to
>>> switch to DM.
>>
>>
>> Correct. We definitely don't want to add new features to non-DM
>> drivers / IF, if this is non-trivial.
>>
>>> Maybe I can check all boards that use xHCI to see if
>>> they are switched to DM?
>>
>>
>> xHCI is still quite new in U-Boot, so I would expect that all
>> platforms using it, are using DM or at least not far away from using
>> it. Yes, please check all xHCI "users", if they use DM. Then we
>> know if and which users need some "persuasion" to switch over to
>> DM soon. ;)
> 
> I checked all boards that have CONFIG_USB_XHCI_HCD defined but without
> CONFIG_DM_USB. Here is the list.
> 
> configs/uniphier_v8_defconfig:36:CONFIG_USB_XHCI_HCD=y
> configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig:62:CONFIG_USB_XHCI_HCD=y
> configs/am57xx_evm_nodt_defconfig:53:CONFIG_USB_XHCI_HCD=y
> configs/evb-rk3328_defconfig:34:CONFIG_USB_XHCI_HCD=y
> configs/ls1021atwr_nor_lpuart_defconfig:43:CONFIG_USB_XHCI_HCD=y
> configs/uniphier_pxs2_ld6b_defconfig:44:CONFIG_USB_XHCI_HCD=y
> configs/ls1012ardb_qspi_SECURE_BOOT_defconfig:43:CONFIG_USB_XHCI_HCD=y
> configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig:57:CONFIG_USB_XHCI_HCD=y
> configs/k2e_hs_evm_defconfig:34:CONFIG_USB_XHCI_HCD=y
> configs/ls1021aqds_sdcard_qspi_defconfig:61:CONFIG_USB_XHCI_HCD=y
> configs/am43xx_evm_ethboot_defconfig:48:CONFIG_USB_XHCI_HCD=y
> configs/xilinx_zynqmp_ep_defconfig:70:CONFIG_USB_XHCI_HCD=y
> configs/ls1021aqds_nand_defconfig:57:CONFIG_USB_XHCI_HCD=y
> configs/ls1021atwr_qspi_defconfig:50:CONFIG_USB_XHCI_HCD=y
> configs/k2g_evm_defconfig:45:CONFIG_USB_XHCI_HCD=y
> configs/am57xx_evm_defconfig:63:CONFIG_USB_XHCI_HCD=y
> configs/am43xx_hs_evm_defconfig:49:CONFIG_USB_XHCI_HCD=y
> configs/am43xx_evm_defconfig:39:CONFIG_USB_XHCI_HCD=y
> configs/ls1021atwr_nor_defconfig:42:CONFIG_USB_XHCI_HCD=y
> configs/firefly-rk3399_defconfig:59:CONFIG_USB_XHCI_HCD=y
> configs/puma-rk3399_defconfig:78:CONFIG_USB_XHCI_HCD=y
> configs/cl-som-am57x_defconfig:55:CONFIG_USB_XHCI_HCD=y
> configs/ls1021aqds_nor_SECURE_BOOT_defconfig:43:CONFIG_USB_XHCI_HCD=y
> configs/uniphier_pro4_defconfig:43:CONFIG_USB_XHCI_HCD=y
> configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig:61:CONFIG_USB_XHCI_HCD=y
> configs/xilinx_zynqmp_zcu102_defconfig:63:CONFIG_USB_XHCI_HCD=y
> configs/ls1021atwr_nor_SECURE_BOOT_defconfig:42:CONFIG_USB_XHCI_HCD=y
> configs/cm_t43_defconfig:67:CONFIG_USB_XHCI_HCD=y
> configs/k2g_hs_evm_defconfig:36:CONFIG_USB_XHCI_HCD=y
> configs/am43xx_evm_qspiboot_defconfig:45:CONFIG_USB_XHCI_HCD=y
> configs/ls1021aqds_qspi_defconfig:50:CONFIG_USB_XHCI_HCD=y
> configs/am57xx_hs_evm_defconfig:67:CONFIG_USB_XHCI_HCD=y
> configs/xilinx_zynqmp_zcu102_revB_defconfig:63:CONFIG_USB_XHCI_HCD=y
> configs/ls1021aqds_sdcard_ifc_defconfig:55:CONFIG_USB_XHCI_HCD=y
> configs/uniphier_ld20_defconfig:39:CONFIG_USB_XHCI_HCD=y
> configs/am43xx_evm_usbhost_boot_defconfig:61:CONFIG_USB_XHCI_HCD=y
> configs/ls1021atwr_sdcard_qspi_defconfig:61:CONFIG_USB_XHCI_HCD=y
> configs/evb-rk3399_defconfig:60:CONFIG_USB_XHCI_HCD=y
> configs/k2hk_evm_defconfig:43:CONFIG_USB_XHCI_HCD=y
> configs/k2hk_hs_evm_defconfig:34:CONFIG_USB_XHCI_HCD=y
> configs/k2e_evm_defconfig:43:CONFIG_USB_XHCI_HCD=y
> configs/ls1021atwr_sdcard_ifc_defconfig:54:CONFIG_USB_XHCI_HCD=y
> configs/k2l_evm_defconfig:43:CONFIG_USB_XHCI_HCD=y
> 
> So it looks we have lots of conversion work to be done by many board
> maintainers. I am not sure how to proceed on this.

Could the USB_DM be implied on these boards ?

-- 
Best regards,
Marek Vasut