[U-Boot] [PATCH 0/3] usb: xhci: Add interrupt transfer support
Stefan Roese
sr at denx.de
Thu Jun 29 08:20:32 UTC 2017
Hi Bin,
On 29.06.2017 10:09, Stefan Roese wrote:
> Hi Bin,
>
> On 29.06.2017 08:51, Bin Meng wrote:
>> Hi Stefan,
>>
>> On Thu, Jun 29, 2017 at 2:13 PM, Stefan Roese <sr at denx.de> wrote:
>>> Hi Bin,
>>>
>>> On 29.06.2017 07:39, Bin Meng wrote:
>>>> Hi Stefan,
>>>>
>>>> On Wed, Jun 28, 2017 at 8:47 PM, Stefan Roese <sr at denx.de> wrote:
>>>>> Hi Bin,
>>>>>
>>>>> On 28.06.2017 14:11, Bin Meng wrote:
>>>>>> On Wed, Jun 28, 2017 at 7:00 PM, Stefan Roese <sr at denx.de> wrote:
>>>>>>> Hi Bin,
>>>>>>>
>>>>>>> On 26.06.2017 13:05, Bin Meng wrote:
>>>>>>>> This series is the final series of the xHCI driver update.
>>>>>>>>
>>>>>>>> This adds the missing interrupt transfer support to xHCI driver, so
>>>>>>>> that devices like USB keyboard that uses interrupt transfer when
>>>>>>>> CONFIG_SYS_USB_EVENT_POLL is defined can work.
>>>>>>>>
>>>>>>>> Previous two series:
>>>>>>>> [1]: usb: xhci: Fix USB xHCI support on Intel platform
>>>>>>>> https://lists.denx.de/pipermail/u-boot/2017-June/296166.html
>>>>>>>> [2]: usb: hub: Support USB 3.0 hubs
>>>>>>>> https://lists.denx.de/pipermail/u-boot/2017-June/296284.html
>>>>>>>>
>>>>>>>> This series is available at u-boot-x86/xhci-working3 for testing.
>>>>>>>
>>>>>>> I'm using this git branch to test all your xHCI related patches
>>>>>>> now. On my BayTrail platform I get these messages upon "usb reset"
>>>>>>> scanning:
>>>>>>>
>>>>>>> => usb reset
>>>>>>> resetting USB...
>>>>>>> USB0: Register 7000820 NbrPorts 7
>>>>>>> Starting the controller
>>>>>>> USB XHCI 1.00
>>>>>>> scanning bus 0 for devices... cannot reset port 1!?
>>>>>>> USB device descriptor short read (expected 18, got 8)
>>>>>>> 5 USB Device(s) found
>>>>>>> scanning usb for storage devices... 1 Storage Device(s)
>>>>>>> found
>>>>>>>
>>>>>>> On the 2nd scan, the "cannot reset port 1" line is gone:
>>>>>>>
>>>>>>> => usb reset
>>>>>>> resetting USB...
>>>>>>> USB0: Register 7000820 NbrPorts 7
>>>>>>> Starting the controller
>>>>>>> USB XHCI 1.00
>>>>>>> scanning bus 0 for devices... USB device descriptor short read
>>>>>>> (expected 18, got 8)
>>>>>>> 5 USB Device(s) found
>>>>>>> scanning usb for storage devices... 1 Storage Device(s)
>>>>>>> found
>>>>>>>
>>>>>>> All USB devices seem to be detected correctly though. Here the
>>>>>>> logs:
>>>>>>>
>>>>>>> => usb tree
>>>>>>> USB device tree:
>>>>>>> 1 Hub (5 Gb/s, 0mA)
>>>>>>> | U-Boot XHCI Host Controller
>>>>>>> |
>>>>>>> +-2 Hub (480 Mb/s, 100mA)
>>>>>>> |
>>>>>>> +-3 Hub (480 Mb/s, 2mA)
>>>>>>> | |
>>>>>>> | +-5 Mass Storage (480 Mb/s, 200mA)
>>>>>>> | JetFlash Mass Storage Device 3281440601
>>>>>>> |
>>>>>>> +-4 Vendor specific (5 Gb/s, 64mA)
>>>>>>> Realtek USB 10/100/1000 LAN 000002000000
>>>>>>>
>>>>>>> => usb info
>>>>>>> 1: Hub, USB Revision 3.0
>>>>>>> - U-Boot XHCI Host Controller
>>>>>>> - Class: Hub
>>>>>>> - PacketSize: 512 Configurations: 1
>>>>>>> - Vendor: 0x0000 Product 0x0000 Version 1.0
>>>>>>> Configuration: 1
>>>>>>> - Interfaces: 1 Self Powered 0mA
>>>>>>> Interface: 0
>>>>>>> - Alternate Setting 0, Endpoints: 1
>>>>>>> - Class Hub
>>>>>>> - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
>>>>>>>
>>>>>>> 2: Hub, USB Revision 2.0
>>>>>>> - Class: Hub
>>>>>>> - PacketSize: 64 Configurations: 1
>>>>>>> - Vendor: 0x0409 Product 0x005a Version 1.0
>>>>>>> Configuration: 1
>>>>>>> - Interfaces: 1 Self Powered Remote Wakeup 100mA
>>>>>>> Interface: 0
>>>>>>> - Alternate Setting 0, Endpoints: 1
>>>>>>> - Class Hub
>>>>>>> - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms
>>>>>>>
>>>>>>> 3: Hub, USB Revision 2.1
>>>>>>> - Class: Hub
>>>>>>> - PacketSize: 64 Configurations: 1
>>>>>>> - Vendor: 0x0424 Product 0x4604 Version 1.131
>>>>>>> Configuration: 1
>>>>>>> - Interfaces: 1 Self Powered Remote Wakeup 2mA
>>>>>>> Interface: 0
>>>>>>> - Alternate Setting 0, Endpoints: 1
>>>>>>> - Class Hub
>>>>>>> - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms
>>>>>>> - Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms
>>>>>>>
>>>>>>> 5: Mass Storage, USB Revision 2.10
>>>>>>> - JetFlash Mass Storage Device 3281440601
>>>>>>> - Class: (from Interface) Mass Storage
>>>>>>> - PacketSize: 64 Configurations: 1
>>>>>>> - Vendor: 0x8564 Product 0x1000 Version 16.117
>>>>>>> Configuration: 1
>>>>>>> - Interfaces: 1 Bus Powered 200mA
>>>>>>> Interface: 0
>>>>>>> - Alternate Setting 0, Endpoints: 2
>>>>>>> - Class Mass Storage, Transp. SCSI, Bulk only
>>>>>>> - Endpoint 2 Out Bulk MaxPacket 512
>>>>>>> - Endpoint 1 In Bulk MaxPacket 512
>>>>>>>
>>>>>>> 4: Vendor specific, USB Revision 3.0
>>>>>>> - Realtek USB 10/100/1000 LAN 000002000000
>>>>>>> - Class: (from Interface) Vendor specific
>>>>>>> - PacketSize: 512 Configurations: 2
>>>>>>> - Vendor: 0x0bda Product 0x8153 Version 48.0
>>>>>>> Configuration: 1
>>>>>>> - Interfaces: 1 Bus Powered Remote Wakeup 64mA
>>>>>>> Interface: 0
>>>>>>> - Alternate Setting 0, Endpoints: 3
>>>>>>> - Class Vendor specific
>>>>>>> - Endpoint 1 In Bulk MaxPacket 1024
>>>>>>> - Endpoint 2 Out Bulk MaxPacket 1024
>>>>>>> - Endpoint 3 In Interrupt MaxPacket 2 Interval 8ms
>>>>>>>
>>>>>>> Do you have any ideas about the scanning logs that I've noticed
>>>>>>> above? Would it help if I provided some debug logs (-DDEBUG)
>>>>>>> for this?
>>>>>>
>>>>>> "cannot reset port 1" message is annoying, but that may happen
>>>>>> sometimes due to unstable power supply. I will see if we can mute it
>>>>>> if it's not the final round of reset try.
>>>>>
>>>>> That would be good, thanks.
>>>>>
>>>>>> I am more concerned about
>>>>>> the "USB device descriptor short read (expected 18, got 8)". This
>>>>>> message indicates U-Boot cannot get the device descriptor during set
>>>>>> configuration process. So did you manage to get all USB devices that
>>>>>> are connected on your board enumerated?
>>>>>
>>>>> Might be that I'm missing some keyboard / mouse, which I'm not
>>>>> using and not really aware of. One USB port is connected to a
>>>>> KVM switch, enumberating such devices. Here the log from U-Boot
>>>>> and Linux again:
>>>>>
>>>>> => usb reset
>>>>> resetting USB...
>>>>> USB0: Register 7000820 NbrPorts 7
>>>>> Starting the controller
>>>>> USB XHCI 1.00
>>>>> scanning bus 0 for devices... cannot reset port 1!?
>>>>> USB device descriptor short read (expected 18, got 8)
>>>>> 6 USB Device(s) found
>>>>> scanning usb for storage devices... 2 Storage Device(s) found
>>>>> => usb tree
>>>>> USB device tree:
>>>>> 1 Hub (5 Gb/s, 0mA)
>>>>> | U-Boot XHCI Host Controller
>>>>> |
>>>>> +-2 Hub (480 Mb/s, 100mA)
>>>>> |
>>>>> +-3 Mass Storage (480 Mb/s, 98mA)
>>>>> | USBest Technology USB Mass Storage Device 09092207fbf0c4
>>>>> |
>>>>> +-4 Hub (480 Mb/s, 2mA)
>>>>> | |
>>>>> | +-6 Mass Storage (480 Mb/s, 200mA)
>>>>> | JetFlash Mass Storage Device 3281440601
>>>>> |
>>>>> +-5 Vendor specific (5 Gb/s, 64mA)
>>>>> Realtek USB 10/100/1000 LAN 000002000000
>>>>>
>>>>>
>>>>> $ lsusb -t
>>>>> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 5000M
>>>>> |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class,
>>>>> Driver=r8152, 5000M
>>>>> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 480M
>>>>> |__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
>>>>> |__ Port 4: Dev 4, If 0, Class=Hub, Driver=hub/4p, 12M
>>>>> |__ Port 1: Dev 6, If 1, Class=Human Interface
>>>>> Device, Driver=usbhid, 12M
>>>>> |__ Port 1: Dev 6, If 2, Class=Human Interface
>>>>> Device, Driver=usbhid, 12M
>>>>> |__ Port 1: Dev 6, If 0, Class=Human Interface
>>>>> Device, Driver=usbhid, 12M
>>>>> |__ Port 4: Dev 3, If 0, Class=Mass Storage,
>>>>> Driver=usb-storage, 480M
>>>>> |__ Port 5: Dev 5, If 0, Class=Hub, Driver=hub/4p, 480M
>>>>> |__ Port 1: Dev 7, If 0, Class=Mass Storage,
>>>>> Driver=usb-storage, 480M
>>>>>
>>>>>
>>>>> Which event polling Kconfig option do I need to enable?
>>>>>
>>>>
>>>> The default one CONFIG_SYS_USB_EVENT_POLL should be OK. By comparing
>>>> your U-Boot log and Linux one, I found the following devices were
>>>> enumerated by Linux but not by U-Boot:
>>>>
>>>> |__ Port 1: Dev 6, If 1, Class=Human Interface Device,
>>>> Driver=usbhid, 12M
>>>> |__ Port 1: Dev 6, If 2, Class=Human Interface Device,
>>>> Driver=usbhid, 12M
>>>> |__ Port 1: Dev 6, If 0, Class=Human Interface Device,
>>>> Driver=usbhid, 12M
>>>>
>>>> These devices are full speed devices. I believe the reason is that
>>>> U-Boot encounters "USB device descriptor short read (expected 18, got
>>>> 8)" so it does not continue the enumeration. As to why these full
>>>> speed devices only return 8 bytes descriptors, this needs to be
>>>> investigated. Which devices are they?
>>>
>>> This is my KVM switch with its USB keyboard and mouse. When I unplug
>>> this USB cable, this message does not appear while running "usb reset".
>>>
>>> This also happen, when I only plug a USB mouse to this same USB
>>> port:
>>>
>>> => usb reset
>>> resetting USB...
>>> USB0: Register 7000820 NbrPorts 7
>>> Starting the controller
>>> USB XHCI 1.00
>>> scanning bus 0 for devices... USB device descriptor short read
>>> (expected 18, got 8)
>>> 5 USB Device(s) found
>>> scanning usb for storage devices... 2 Storage Device(s) found
>>> => usb tree
>>> USB device tree:
>>> 1 Hub (5 Gb/s, 0mA)
>>> | U-Boot XHCI Host Controller
>>> |
>>> +-2 Mass Storage (480 Mb/s, 98mA)
>>> | USBest Technology USB Mass Storage Device 09092207fbf0c4
>>> |
>>> +-3 Hub (480 Mb/s, 2mA)
>>> | |
>>> | +-5 Mass Storage (480 Mb/s, 200mA)
>>> | JetFlash Mass Storage Device 3281440601
>>> |
>>> +-4 Vendor specific (5 Gb/s, 64mA)
>>> Realtek USB 10/100/1000 LAN 000002000000
>>>
>>>
>>> $ lsusb -t
>>> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 5000M
>>> |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class,
>>> Driver=r8152, 5000M
>>> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 480M
>>> |__ Port 2: Dev 2, If 0, Class=Human Interface Device,
>>> Driver=usbhid, 12M
>>> |__ Port 2: Dev 2, If 1, Class=Human Interface Device,
>>> Driver=usbhid, 12M
>>> |__ Port 4: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage,
>>> 480M
>>> |__ Port 5: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M
>>> |__ Port 1: Dev 5, If 0, Class=Mass Storage,
>>> Driver=usb-storage, 480M
>>>
>>>
>>> Can you reproduce this on your MinnowMax? Would it help, if I
>>> would enable some traces (-DDEBUG)?
>>
>> I cannot reproduce this on MinnowMax. Is the KVM switch a USB 2.0 or
>> 3.0 hub?
>
> USB 2.0, its a pretty old device. But the example above is without the
> KVM and only with the USB mouse.
>
>> Is it possible to switch BayTrail SoC to EHCI and do the same
>> testing?
>
> Sure. After disabling CONFIG_USB_XHCI_HC I now get this error:
>
> => usb reset
> resetting USB...
> USB0: USB EHCI 1.00
> scanning bus 0 for devices... Divide Error
> EIP: 0010:[<7b587862>] EFLAGS: 00010246
> Original EIP :[<fff33862>]
> EAX: 00000040 EBX: 7b35db00 ECX: 00000380 EDX: 00000000
> ESI: 7b33af40 EDI: 7b33aa00 EBP: 7b35a640 ESP: 7b33a990
> DS: 0018 ES: 0018 FS: 0020 GS: 0018 SS: 0018
> CR0: 00000033 CR2: 00000000 CR3: 00000000 CR4: 00000600
> DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> DR6: ffff0ff0 DR7: 00000400
> Stack:
> 0x7b33a9d0 : 0x7b35dac0
> 0x7b33a9cc : 0x7b33af40
> 0x7b33a9c8 : 0x00000100
> 0x7b33a9c4 : 0x7b33ac80
> 0x7b33a9c0 : 0x00000001
> 0x7b33a9bc : 0x7b33ac80
> 0x7b33a9b8 : 0x7b35a680
> 0x7b33a9b4 : 0x00000000
> 0x7b33a9b0 : 0x00000040
> 0x7b33a9ac : 0x80000080
> 0x7b33a9a8 : 0x7b35db00
> 0x7b33a9a4 : 0x00000040
> 0x7b33a9a0 : 0x00000002
> 0x7b33a99c : 0x7b35dac0
> 0x7b33a998 : 0x1616cae2
> 0x7b33a994 : 0xc8159ec7
> --->0x7b33a990 : 0xc1b7c2b0
> 0x7b33a98c : 0x00010246
> 0x7b33a988 : 0x00000010
> 0x7b33a984 : 0x7b587862
> ### ERROR ### Please RESET the board ###
>
> EHCI worked before just fine. Does this (EHCI) work on your
> MinnoxMax?
I just installed an earlier version with EHCI still working. Here the
USB mouse is detected:
=> usb reset
resetting USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 5 USB Device(s) found
=> usb tree
USB device tree:
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 0mA)
|
+-3 Vendor specific (480 Mb/s, 180mA)
| Realtek USB 10/100/1000 LAN 000002000000
|
+-5 Mass Storage (480 Mb/s, 98mA)
| USBest Technology USB Mass Storage Device 09092207fbf0c4
|
+-4 Human Interface (12 Mb/s, 98mA)
Logitech USB Receiver
=> usb info
1: Hub, USB Revision 2.0
- u-boot EHCI Host Controller
- Class: Hub
- PacketSize: 64 Configurations: 1
- Vendor: 0x0000 Product 0x0000 Version 1.0
Configuration: 1
- Interfaces: 1 Self Powered 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms
2: Hub, USB Revision 2.0
- Class: Hub
- PacketSize: 64 Configurations: 1
- Vendor: 0x8087 Product 0x07e6 Version 0.23
Configuration: 1
- Interfaces: 1 Self Powered Remote Wakeup 0mA
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Hub
- Endpoint 1 In Interrupt MaxPacket 1 Interval 12ms
3: Vendor specific, USB Revision 2.10
- Realtek USB 10/100/1000 LAN 000002000000
- Class: (from Interface) Vendor specific
- PacketSize: 64 Configurations: 2
- Vendor: 0x0bda Product 0x8153 Version 48.0
Configuration: 1
- Interfaces: 1 Bus Powered Remote Wakeup 180mA
Interface: 0
- Alternate Setting 0, Endpoints: 3
- Class Vendor specific
- Endpoint 1 In Bulk MaxPacket 512
- Endpoint 2 Out Bulk MaxPacket 512
- Endpoint 3 In Interrupt MaxPacket 2 Interval 8ms
5: Mass Storage, USB Revision 2.0
- USBest Technology USB Mass Storage Device 09092207fbf0c4
- Class: (from Interface) Mass Storage
- PacketSize: 64 Configurations: 1
- Vendor: 0x1307 Product 0x0165 Version 1.0
Configuration: 1
- Interfaces: 1 Bus Powered 98mA
Interface: 0
- Alternate Setting 0, Endpoints: 3
- Class Mass Storage, Transp. SCSI, Bulk only
- Endpoint 1 Out Bulk MaxPacket 512
- Endpoint 2 In Bulk MaxPacket 512
- Endpoint 3 In Interrupt MaxPacket 64 Interval 8ms
4: Human Interface, USB Revision 2.0
- Logitech USB Receiver
- Class: (from Interface) Human Interface
- PacketSize: 8 Configurations: 1
- Vendor: 0x046d Product 0xc52f Version 34.0
Configuration: 1
- Interfaces: 2 Bus Powered Remote Wakeup 98mA
- String: "RQR22.00_B0005"
Interface: 0
- Alternate Setting 0, Endpoints: 1
- Class Human Interface, Subclass: Boot Mouse
- Endpoint 1 In Interrupt MaxPacket 8 Interval 2ms
Interface: 1
- Alternate Setting 0, Endpoints: 1
- Class Human Interface, Subclass: None
- Endpoint 2 In Interrupt MaxPacket 20 Interval 2ms
Thanks,
Stefan
More information about the U-Boot
mailing list