[U-Boot] [RFC/PATCH 2/2] ni: zynq: Add support for NI Ettus Research Project Sulfur Rev3 SDR
Michal Simek
monstr at monstr.eu
Thu Jun 29 10:26:57 UTC 2017
On 23.6.2017 22:57, Moritz Fischer wrote:
> Add support for second revision of NI Ettus Research Project Sulfur
> Revision 3 SDR board.
>
> Signed-off-by: Moritz Fischer <moritz.fischer at ettus.com>
Save comments as before for this file.
> ---
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/zynq-ni-sulfur-rev3-uboot.dtsi | 26 ++
> arch/arm/dts/zynq-ni-sulfur-rev3.dts | 325 +++++++++++++++++++++++
> board/ni/zynq/board.c | 38 +++
> board/ni/zynq/sulfur-eeprom.h | 66 +++++
> board/ni/zynq/zynq-ni-sulfur-rev3/ps7_init_gpl.c | 307 +++++++++++++++++++++
> configs/ni_sulfur_rev3_defconfig | 69 +++++
> include/configs/ni_sulfur_rev3.h | 42 +++
> 8 files changed, 874 insertions(+)
> create mode 100644 arch/arm/dts/zynq-ni-sulfur-rev3-uboot.dtsi
> create mode 100644 arch/arm/dts/zynq-ni-sulfur-rev3.dts
> create mode 100644 board/ni/zynq/sulfur-eeprom.h
> create mode 100644 board/ni/zynq/zynq-ni-sulfur-rev3/ps7_init_gpl.c
> create mode 100644 configs/ni_sulfur_rev3_defconfig
> create mode 100644 include/configs/ni_sulfur_rev3.h
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index c3be80f..2a29b9c 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -127,6 +127,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
> zynq-microzed.dtb \
> zynq-picozed.dtb \
> zynq-ni-sulfur-rev2.dtb \
> + zynq-ni-sulfur-rev3.dtb \
> zynq-topic-miami.dtb \
> zynq-topic-miamilite.dtb \
> zynq-topic-miamiplus.dtb \
> diff --git a/arch/arm/dts/zynq-ni-sulfur-rev3-uboot.dtsi b/arch/arm/dts/zynq-ni-sulfur-rev3-uboot.dtsi
> new file mode 100644
> index 0000000..9a8b4e7
> --- /dev/null
> +++ b/arch/arm/dts/zynq-ni-sulfur-rev3-uboot.dtsi
> @@ -0,0 +1,26 @@
> +/*
> + * U-Boot addition to handle Sulfur Rev3 pins
> + *
> + * (C) Copyright 2017 National Instruments Corp
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +&gpio0 {
> + u-boot,dm-pre-reloc;
> +
> + sys_pwron_33 {
> + u-boot,dm-pre-reloc;
> + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&uart0 {
> + u-boot,dm-pre-reloc;
> +};
> +
> +&sdhci0 {
> + u-boot,dm-pre-reloc;
> +};
> diff --git a/arch/arm/dts/zynq-ni-sulfur-rev3.dts b/arch/arm/dts/zynq-ni-sulfur-rev3.dts
> new file mode 100644
> index 0000000..3e2c69e
> --- /dev/null
> +++ b/arch/arm/dts/zynq-ni-sulfur-rev3.dts
> @@ -0,0 +1,325 @@
> +/*
> + * National Instruments Ettus Research Project Sulfur SDR Revision 2
> + * devicetree source.
> + *
> + * Copyright (c) 2016 National Instruments Corp.
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include "zynq-7000.dtsi"
> +
> +/ {
> + model = "NI Ettus Research Project Sulfur SDR Rev3";
> + compatible = "ettus,zynq-sulfur-rev3", "xlnx,zynq-7000";
> +
> + aliases {
> + ethernet0 = &gem0;
> + serial0 = &uart0;
> + serial1 = &uart1;
> + spi0 = &spi0;
> + spi1 = &spi1;
> + gpio0 = &gpio0;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c20 = &tun;
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x40000000>;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + power-button {
> + label = "Power Button";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + gpio-poweroff {
> + compatible = "gpio-poweroff";
> + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + led0 {
> + label = "sulfur:ledp";
> + gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + default-state = "keep";
> + };
> + };
> +
> + usb_phy0: phy0 {
> + compatible = "usb-nop-xceiv";
> + #phy-cells = <0>;
> + reset-gpios = <&gpio0 51 GPIO_ACTIVE_LOW>;
> + };
> +
> +};
> +
> +&cpu0 {
> + operating-points = <800000 1000000>;
> +};
> +
> +&sdhci0 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +/* we use the ARM global timer */
> +&ttc0 {
> + status = "disabled";
> +};
> +
> +/* we use the ARM global timer */
> +&ttc1 {
> + status = "disabled";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + i2cswitch at 70 {
> + compatible = "ti,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> +
> + reset-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
> +
> + i2c at 0 {
> + reg = <0>;
> + status = "disabled";
> + };
> +
> + i2c at 1 {
> + reg = <1>;
> + status = "disabled";
> + };
> +
> + i2c at 2 {
> + reg = <2>;
> + status = "disabled";
> + };
> +
> + i2c at 3 {
> + reg = <3>;
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio1: gpio at 22 {
> + compatible = "ti,tca6424";
> + reg = <0x22>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +
> + i2c at 4 {
> + reg = <4>;
> + status = "disabled";
> + };
> +
> + i2c at 5 {
> + reg = <5>;
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rtc0: rtc at 68 {
> + compatible = "dallas,ds1374";
> + reg = <0x68>;
> + };
> + };
> +
> + usrpio_i2c0: i2c at 6 {
> + reg = <6>;
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + eeprom at 50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + };
> + };
> +
> + usrpio_i2c1: i2c at 7 {
> + reg = <7>;
> + status = "okay";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + eeprom at 50 {
> + compatible = "atmel,24c256";
> + reg = <0x50>;
> + };
> +
> + };
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <400000>;
> +
> + embedded-controller at 1e {
> + reg = <0x1e>;
> + compatible = "ni,embedded-controller-i2c",
> + "google,cros-ec-i2c";
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + interrupt-parent = <&gpio0>;
> + google,has-vbc-nvram;
> +
> + wakeup-source;
> +
> + tun: i2c-tunnel {
> + compatible = "google,cros-ec-i2c-tunnel";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + google,remote-bus = <0>;
> + clock-frequency = <100000>;
> +
> + nvmem0: eeprom at 50 {
> + compatible = "at24,24c02";
> + reg = <0x50>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + read-only;
> +
> + eth0_addr: eth-addr at 24 {
> + reg = <0x24 0x6>;
> + };
> +
> + eth1_addr: eth-addr at 2c {
> + reg = <0x2c 0x6>;
> + };
> +
> + eth2_addr: eth-addr at 34 {
> + reg = <0x34 0x6>;
> + };
> + };
> + };
> + };
> +
> +};
> +
> +&gpio0 {
> + status = "okay";
> +
> + ledn {
> + gpio-hog;
> + gpios = <4 GPIO_ACTIVE_LOW>;
> + output-high;
> + };
> +};
> +
> +&clkc {
> + ps-clk-frequency = <33333333>;
> + fclk-enable = <0xf>;
> +};
> +
> +&spi0 {
> + status = "disabled";
> +};
> +
> +&spi1 {
> + status = "disabled";
> +};
> +
> +&gem0 {
> + status = "okay";
> + phy-mode = "rgmii-id";
> + phy-handle = <ðernet_phy0>;
> +
> +
> + ethernet_phy0: ethernet-phy at 0 {
> + reg = <0>;
> + reset-gpios = <&gpio0 50 GPIO_ACTIVE_LOW>;
> + };
> +};
> +
> +&usb0 {
> + status = "okay";
> + dr_mode = "otg";
> + usb-phy = <&usb_phy0>;
> +};
> +
> +&amba {
> + fpga_region0: fpga-region at 40000000 {
> + compatible = "fpga-region";
> + fpga-mgr = <&devcfg>;
> + #address-cells = <0x1>;
> + #size-cells = <0x1>;
> + ranges;
> + };
> +
> + ocm: sram at fffc0000 {
> + compatible = "mmio-sram";
> + reg = <0xfffc0000 0x10000>;
> + };
> +};
> +
> +#include "zynq-ni-sulfur-rev3-uboot.dtsi"
> diff --git a/board/ni/zynq/board.c b/board/ni/zynq/board.c
> index be818da..3dc30ad 100644
> --- a/board/ni/zynq/board.c
> +++ b/board/ni/zynq/board.c
> @@ -14,6 +14,9 @@
> #include <asm/arch/hardware.h>
> #include <asm/arch/sys_proto.h>
>
> +#include "sulfur-eeprom.h"
> +#include <i2c.h>
> +
> DECLARE_GLOBAL_DATA_PTR;
>
> #if (defined(CONFIG_FPGA) && !defined(CONFIG_SPL_BUILD)) || \
> @@ -162,6 +165,39 @@ int checkboard(void)
> }
> #endif
>
> +int sulfur_read_ethaddr(unsigned char *ethaddr)
> +{
> + struct udevice *i2c_tun, *eeprom_chip;
> + struct sulfur_mboard_eeprom eeprom;
> + int err, i;
> + u32 crc;
> +
> + err = uclass_get_device_by_seq(UCLASS_I2C, 20, &i2c_tun);
> + if (err < 0)
> + return err;
> +
> + err = dm_i2c_probe(i2c_tun, 0x50, 0, &eeprom_chip);
> + if (err < 0)
> + return err;zynq_board_read_rom_ethaddr
> +
> + for (i = 0; i < sizeof(eeprom); i++) {
> + err = dm_i2c_reg_read(eeprom_chip, i);
> + if (err < 0)
> + break;
> + *(((u8 *)(&eeprom)) + i) = err & 0xff;
> + }
> +
> + crc = crc32(0, (const u8 *)&eeprom, sizeof(eeprom) - 4);
> + if (htonl(crc) != eeprom.crc) {
> + printf("%s: CRC for eeprom doesn't match! %08x vs %08x\n",
> + __func__, htonl(crc), eeprom.crc);
> + return -EINVAL;
> + }
> + memcpy(ethaddr, &eeprom.eth_addr0, ETH_ALEN);
> +
> + return 0;
> +}
> +
> int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
> {
> #if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
> @@ -172,6 +208,8 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
> printf("I2C EEPROM MAC address read failed\n");
> #endif
>
> + sulfur_read_ethaddr(ethaddr);
> +
there was initiative to do this in generic way. Please check that
patchset if that went trough because idea was to remove this function
completely and use generic code which would cover what you have above.
> return 0;
> }
>
> diff --git a/board/ni/zynq/sulfur-eeprom.h b/board/ni/zynq/sulfur-eeprom.h
> new file mode 100644
> index 0000000..ed1c8a3
> --- /dev/null
> +++ b/board/ni/zynq/sulfur-eeprom.h
> @@ -0,0 +1,66 @@
> +/*
> + * NI Ettus Research Sulfur EEPROM helpers
> + *
> + * Copyright (c) 2017 National Instruments Corp
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef NI_ZYNQ_SULFUR_EEPROM_H
> +#define NI_ZYNQ_SULFUR_EEPROM_H
> +
> +#define ETH_ALEN 6
> +
> +/**
> + * sulfur_mboard_eeprom - The memory map of the USRP Sulfur SDR EEPROM
> + *
> + * @magic: Magic constant to indicate that one is looking at a MB eeprom
> + * @version: Data layout version
> + * @mcu_flags: Flags for the EC
> + * @pid: Product Identifier
> + * @rev: Revision Number (zero based)
> + * @serial: (Non zero terminated) String containing the serial number
> + * @eth_addr0: Contains ethernet address for eth0
> + * @__pad0: Padding
> + * @eth_addr1: Contains ethernet address for eth1
> + * @__pad1: Padding
> + * @eth_addr2: Contains ethernet address for eth2
> + * @__pad2: Padding
> + * @crc: Contains checksum over the entire struct minus the crc member
> + */
> +struct sulfur_mboard_eeprom {
> + u32 magic;
> + u32 version;
> + u32 mcu_flags[4];
> + u16 pid;
> + u16 rev;
> + u8 serial[8];
> + u8 eth_addr0[ETH_ALEN];
> + u8 __pad_0[2];
> + u8 eth_addr1[ETH_ALEN];
> + u8 __pad_1[2];
> + u8 eth_addr2[ETH_ALEN];
> + u8 __pad_2[2];
> + u32 crc;
> +} __packed;
> +
> +/**
> + * sulfur_dboard_eeprom - The memory map of the USRP Sulfur SDR EEPROM
> + *
> + * @magic: Magic constant to indicate that one is looking at a DB eeprom
> + * @version: Data layout version
> + * @pid: Product Identifier
> + * @rev: Revision Number (zero based)
> + * @serial: (Non zero terminated) String containing the serial number
> + * @crc: Contains checksum over the entire struct minus the crc member
> + */
> +struct sulfur_dboard_eeprom {
> + u32 magic;
> + u32 version;
> + u16 pid;
> + u16 rev;
> + u8 serial[8];
> + u32 crc;
> +} __packed;
> +
> +#endif /* NI_ZYNQ_SULFUR_EEPROM_H */
> diff --git a/board/ni/zynq/zynq-ni-sulfur-rev3/ps7_init_gpl.c b/board/ni/zynq/zynq-ni-sulfur-rev3/ps7_init_gpl.c
> new file mode 100644
> index 0000000..92a0a74
> --- /dev/null
> +++ b/board/ni/zynq/zynq-ni-sulfur-rev3/ps7_init_gpl.c
> @@ -0,0 +1,307 @@
> +/*
> + * (c) Copyright 2010-2014 Xilinx, Inc. All rights reserved.
> + * (c) Copyright 2017 National Instruments Corp.
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include "../ps7_init_gpl.h"
> +
> +unsigned long ps7_pll_init_data_3_0[] = {
> + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U, 0x000FA240U),
> + EMIT_MASKWRITE(0XF8000100, 0x0007F000U, 0x00030000U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000010U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000000U),
> + EMIT_MASKPOLL(0XF800010C, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000120, 0x1F003F30U, 0x1F000200U),
> + EMIT_MASKWRITE(0XF8000114, 0x003FFFF0U, 0x0012C220U),
> + EMIT_MASKWRITE(0XF8000104, 0x0007F000U, 0x00020000U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000010U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000000U),
> + EMIT_MASKPOLL(0XF800010C, 0x00000002U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000124, 0xFFF00003U, 0x0C200003U),
> + EMIT_MASKWRITE(0XF8000118, 0x003FFFF0U, 0x001452C0U),
> + EMIT_MASKWRITE(0XF8000108, 0x0007F000U, 0x0001E000U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000010U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000000U),
> + EMIT_MASKPOLL(0XF800010C, 0x00000004U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_clock_init_data_3_0[] = {
> + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000128, 0x03F03F01U, 0x00700F01U),
> + EMIT_MASKWRITE(0XF8000138, 0x00000011U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000140, 0x03F03F71U, 0x00100801U),
> + EMIT_MASKWRITE(0XF8000150, 0x00003F33U, 0x00000A01U),
> + EMIT_MASKWRITE(0XF8000154, 0x00003F33U, 0x00000A03U),
> + EMIT_MASKWRITE(0XF8000158, 0x00003F33U, 0x00000603U),
> + EMIT_MASKWRITE(0XF8000168, 0x00003F31U, 0x00000501U),
> + EMIT_MASKWRITE(0XF8000170, 0x03F03F30U, 0x00200500U),
> + EMIT_MASKWRITE(0XF8000180, 0x03F03F30U, 0x00500500U),
> + EMIT_MASKWRITE(0XF8000190, 0x03F03F30U, 0x00200300U),
> + EMIT_MASKWRITE(0XF80001A0, 0x03F03F30U, 0x00100500U),
> + EMIT_MASKWRITE(0XF80001C4, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF800012C, 0x01FFCCCDU, 0x017CC44DU),
> + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_ddr_init_data_3_0[] = {
> + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000080U),
> + EMIT_MASKWRITE(0XF8006004, 0x0007FFFFU, 0x00001081U),
> + EMIT_MASKWRITE(0XF8006008, 0x03FFFFFFU, 0x03C0780FU),
> + EMIT_MASKWRITE(0XF800600C, 0x03FFFFFFU, 0x02001001U),
> + EMIT_MASKWRITE(0XF8006010, 0x03FFFFFFU, 0x00014001U),
> + EMIT_MASKWRITE(0XF8006014, 0x001FFFFFU, 0x0004281BU),
> + EMIT_MASKWRITE(0XF8006018, 0xF7FFFFFFU, 0x44E458D2U),
> + EMIT_MASKWRITE(0XF800601C, 0xFFFFFFFFU, 0x720238E5U),
> + EMIT_MASKWRITE(0XF8006020, 0x7FDFFFFCU, 0x270872D0U),
> + EMIT_MASKWRITE(0XF8006024, 0x0FFFFFC3U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8006028, 0x00003FFFU, 0x00002007U),
> + EMIT_MASKWRITE(0XF800602C, 0xFFFFFFFFU, 0x00000008U),
> + EMIT_MASKWRITE(0XF8006030, 0xFFFFFFFFU, 0x00040930U),
> + EMIT_MASKWRITE(0XF8006034, 0x13FF3FFFU, 0x000116D4U),
> + EMIT_MASKWRITE(0XF8006038, 0x00000003U, 0x00000000U),
> + EMIT_MASKWRITE(0XF800603C, 0x000FFFFFU, 0x00000777U),
> + EMIT_MASKWRITE(0XF8006040, 0xFFFFFFFFU, 0xFFF00000U),
> + EMIT_MASKWRITE(0XF8006044, 0x0FFFFFFFU, 0x0F666666U),
> + EMIT_MASKWRITE(0XF8006048, 0x0003F03FU, 0x0003C008U),
> + EMIT_MASKWRITE(0XF8006050, 0xFF0F8FFFU, 0x77010800U),
> + EMIT_MASKWRITE(0XF8006058, 0x00010000U, 0x00000000U),
> + EMIT_MASKWRITE(0XF800605C, 0x0000FFFFU, 0x00005003U),
> + EMIT_MASKWRITE(0XF8006060, 0x000017FFU, 0x0000003EU),
> + EMIT_MASKWRITE(0XF8006064, 0x00021FE0U, 0x00020000U),
> + EMIT_MASKWRITE(0XF8006068, 0x03FFFFFFU, 0x00284141U),
> + EMIT_MASKWRITE(0XF800606C, 0x0000FFFFU, 0x00001610U),
> + EMIT_MASKWRITE(0XF8006078, 0x03FFFFFFU, 0x00466111U),
> + EMIT_MASKWRITE(0XF800607C, 0x000FFFFFU, 0x00032222U),
> + EMIT_MASKWRITE(0XF80060A4, 0xFFFFFFFFU, 0x10200802U),
> + EMIT_MASKWRITE(0XF80060A8, 0x0FFFFFFFU, 0x0690CB73U),
> + EMIT_MASKWRITE(0XF80060AC, 0x000001FFU, 0x000001FEU),
> + EMIT_MASKWRITE(0XF80060B0, 0x1FFFFFFFU, 0x1CFFFFFFU),
> + EMIT_MASKWRITE(0XF80060B4, 0x00000200U, 0x00000200U),
> + EMIT_MASKWRITE(0XF80060B8, 0x01FFFFFFU, 0x00200066U),
> + EMIT_MASKWRITE(0XF80060C4, 0x00000003U, 0x00000003U),
> + EMIT_MASKWRITE(0XF80060C4, 0x00000003U, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060C8, 0x000000FFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060DC, 0x00000001U, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060F0, 0x0000FFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060F4, 0x0000000FU, 0x00000008U),
> + EMIT_MASKWRITE(0XF8006114, 0x000000FFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF8006118, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF800611C, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF8006120, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF8006124, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF800612C, 0x000FFFFFU, 0x00018000U),
> + EMIT_MASKWRITE(0XF8006130, 0x000FFFFFU, 0x00018000U),
> + EMIT_MASKWRITE(0XF8006134, 0x000FFFFFU, 0x00018000U),
> + EMIT_MASKWRITE(0XF8006138, 0x000FFFFFU, 0x00018000U),
> + EMIT_MASKWRITE(0XF8006140, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF8006144, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF8006148, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF800614C, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF8006154, 0x000FFFFFU, 0x00000080U),
> + EMIT_MASKWRITE(0XF8006158, 0x000FFFFFU, 0x00000080U),
> + EMIT_MASKWRITE(0XF800615C, 0x000FFFFFU, 0x00000080U),
> + EMIT_MASKWRITE(0XF8006160, 0x000FFFFFU, 0x00000080U),
> + EMIT_MASKWRITE(0XF8006168, 0x001FFFFFU, 0x000000B5U),
> + EMIT_MASKWRITE(0XF800616C, 0x001FFFFFU, 0x000000B5U),
> + EMIT_MASKWRITE(0XF8006170, 0x001FFFFFU, 0x000000B5U),
> + EMIT_MASKWRITE(0XF8006174, 0x001FFFFFU, 0x000000B5U),
> + EMIT_MASKWRITE(0XF800617C, 0x000FFFFFU, 0x000000C0U),
> + EMIT_MASKWRITE(0XF8006180, 0x000FFFFFU, 0x000000C0U),
> + EMIT_MASKWRITE(0XF8006184, 0x000FFFFFU, 0x000000C0U),
> + EMIT_MASKWRITE(0XF8006188, 0x000FFFFFU, 0x000000C0U),
> + EMIT_MASKWRITE(0XF8006190, 0x6FFFFEFEU, 0x00040080U),
> + EMIT_MASKWRITE(0XF8006194, 0x000FFFFFU, 0x0001FC82U),
> + EMIT_MASKWRITE(0XF8006204, 0xFFFFFFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF8006208, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF800620C, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006210, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006214, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006218, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF800621C, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006220, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006224, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF80062A8, 0x00000FF5U, 0x00000000U),
> + EMIT_MASKWRITE(0XF80062AC, 0xFFFFFFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF80062B0, 0x003FFFFFU, 0x00005125U),
> + EMIT_MASKWRITE(0XF80062B4, 0x0003FFFFU, 0x000012A8U),
> + EMIT_MASKPOLL(0XF8000B74, 0x00002000U),
> + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000081U),
> + EMIT_MASKPOLL(0XF8006054, 0x00000007U),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_mio_init_data_3_0[] = {
> + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000B40, 0x00000FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000B44, 0x00000FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000B48, 0x00000FFFU, 0x00000672U),
> + EMIT_MASKWRITE(0XF8000B4C, 0x00000FFFU, 0x00000672U),
> + EMIT_MASKWRITE(0XF8000B50, 0x00000FFFU, 0x00000674U),
> + EMIT_MASKWRITE(0XF8000B54, 0x00000FFFU, 0x00000674U),
> + EMIT_MASKWRITE(0XF8000B58, 0x00000FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000B5C, 0xFFFFFFFFU, 0x0018C61CU),
> + EMIT_MASKWRITE(0XF8000B60, 0xFFFFFFFFU, 0x00F9861CU),
> + EMIT_MASKWRITE(0XF8000B64, 0xFFFFFFFFU, 0x00F9861CU),
> + EMIT_MASKWRITE(0XF8000B68, 0xFFFFFFFFU, 0x00F9861CU),
> + EMIT_MASKWRITE(0XF8000B6C, 0x00007FFFU, 0x00000260U),
> + EMIT_MASKWRITE(0XF8000B70, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000B70, 0x00000021U, 0x00000020U),
> + EMIT_MASKWRITE(0XF8000B70, 0x07FEFFFFU, 0x00000823U),
> + EMIT_MASKWRITE(0XF8000700, 0x00003FFFU, 0x00001600U),
> + EMIT_MASKWRITE(0XF8000704, 0x00003FFFU, 0x00001600U),
> + EMIT_MASKWRITE(0XF8000708, 0x00003FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF800070C, 0x00003FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000710, 0x00003FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000714, 0x00003FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000718, 0x00003FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF800071C, 0x00003FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000720, 0x00003FFFU, 0x000006E0U),
> + EMIT_MASKWRITE(0XF8000724, 0x00003FFFU, 0x000016E1U),
> + EMIT_MASKWRITE(0XF8000728, 0x00003FFFU, 0x000016E1U),
> + EMIT_MASKWRITE(0XF800072C, 0x00003FFFU, 0x000016E0U),
> + EMIT_MASKWRITE(0XF8000730, 0x00003FFFU, 0x00001640U),
> + EMIT_MASKWRITE(0XF8000734, 0x00003FFFU, 0x00001640U),
> + EMIT_MASKWRITE(0XF8000738, 0x00003FFFU, 0x00001640U),
> + EMIT_MASKWRITE(0XF800073C, 0x00003FFFU, 0x00001640U),
> + EMIT_MASKWRITE(0XF8000740, 0x00003FFFU, 0x00001202U),
> + EMIT_MASKWRITE(0XF8000744, 0x00003FFFU, 0x00001202U),
> + EMIT_MASKWRITE(0XF8000748, 0x00003FFFU, 0x00001202U),
> + EMIT_MASKWRITE(0XF800074C, 0x00003FFFU, 0x00001202U),
> + EMIT_MASKWRITE(0XF8000750, 0x00003FFFU, 0x00001202U),
> + EMIT_MASKWRITE(0XF8000754, 0x00003FFFU, 0x00001202U),
> + EMIT_MASKWRITE(0XF8000758, 0x00003FFFU, 0x00001203U),
> + EMIT_MASKWRITE(0XF800075C, 0x00003FFFU, 0x00001203U),
> + EMIT_MASKWRITE(0XF8000760, 0x00003FFFU, 0x00001203U),
> + EMIT_MASKWRITE(0XF8000764, 0x00003FFFU, 0x00001203U),
> + EMIT_MASKWRITE(0XF8000768, 0x00003FFFU, 0x00001203U),
> + EMIT_MASKWRITE(0XF800076C, 0x00003FFFU, 0x00001203U),
> + EMIT_MASKWRITE(0XF8000770, 0x00003FFFU, 0x00001204U),
> + EMIT_MASKWRITE(0XF8000774, 0x00003FFFU, 0x00001205U),
> + EMIT_MASKWRITE(0XF8000778, 0x00003FFFU, 0x00001204U),
> + EMIT_MASKWRITE(0XF800077C, 0x00003FFFU, 0x00001205U),
> + EMIT_MASKWRITE(0XF8000780, 0x00003FFFU, 0x00001204U),
> + EMIT_MASKWRITE(0XF8000784, 0x00003FFFU, 0x00001204U),
> + EMIT_MASKWRITE(0XF8000788, 0x00003FFFU, 0x00001204U),
> + EMIT_MASKWRITE(0XF800078C, 0x00003FFFU, 0x00001204U),
> + EMIT_MASKWRITE(0XF8000790, 0x00003FFFU, 0x00001205U),
> + EMIT_MASKWRITE(0XF8000794, 0x00003FFFU, 0x00001204U),
> + EMIT_MASKWRITE(0XF8000798, 0x00003FFFU, 0x00001204U),
> + EMIT_MASKWRITE(0XF800079C, 0x00003FFFU, 0x00001204U),
> + EMIT_MASKWRITE(0XF80007A0, 0x00003FFFU, 0x00001280U),
> + EMIT_MASKWRITE(0XF80007A4, 0x00003FFFU, 0x00001280U),
> + EMIT_MASKWRITE(0XF80007A8, 0x00003FFFU, 0x00001280U),
> + EMIT_MASKWRITE(0XF80007AC, 0x00003FFFU, 0x00001280U),
> + EMIT_MASKWRITE(0XF80007B0, 0x00003FFFU, 0x00001280U),
> + EMIT_MASKWRITE(0XF80007B4, 0x00003FFFU, 0x00001280U),
> + EMIT_MASKWRITE(0XF80007B8, 0x00003FFFU, 0x00001261U),
> + EMIT_MASKWRITE(0XF80007BC, 0x00003FFFU, 0x00001260U),
> + EMIT_MASKWRITE(0XF80007C0, 0x00003FFFU, 0x00001261U),
> + EMIT_MASKWRITE(0XF80007C4, 0x00003FFFU, 0x00001261U),
> + EMIT_MASKWRITE(0XF80007C8, 0x00003FFFU, 0x00001200U),
> + EMIT_MASKWRITE(0XF80007CC, 0x00003FFFU, 0x00001200U),
> + EMIT_MASKWRITE(0XF80007D0, 0x00003FFFU, 0x00001280U),
> + EMIT_MASKWRITE(0XF80007D4, 0x00003FFFU, 0x00001280U),
> + EMIT_MASKWRITE(0XF8000830, 0x003F003FU, 0x00380037U),
> + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_peripherals_init_data_3_0[] = {
> + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000B48, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000B4C, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000B50, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000B54, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU),
> + EMIT_MASKWRITE(0XE0001034, 0x000000FFU, 0x00000006U),
> + EMIT_MASKWRITE(0XE0001018, 0x0000FFFFU, 0x0000007CU),
> + EMIT_MASKWRITE(0XE0001000, 0x000001FFU, 0x00000017U),
> + EMIT_MASKWRITE(0XE0001004, 0x000003FFU, 0x00000020U),
> + EMIT_MASKWRITE(0XE0000034, 0x000000FFU, 0x00000006U),
> + EMIT_MASKWRITE(0XE0000018, 0x0000FFFFU, 0x0000007CU),
> + EMIT_MASKWRITE(0XE0000000, 0x000001FFU, 0x00000017U),
> + EMIT_MASKWRITE(0XE0000004, 0x000003FFU, 0x00000020U),
> + EMIT_MASKWRITE(0XE000D000, 0x00080000U, 0x00080000U),
> + EMIT_MASKWRITE(0XF8007000, 0x20000000U, 0x00000000U),
> + EMIT_MASKWRITE(0XE000A244, 0x003FFFFFU, 0x000C0000U),
> + EMIT_MASKWRITE(0XE000A00C, 0x003F003FU, 0x00370008U),
> + EMIT_MASKWRITE(0XE000A248, 0x003FFFFFU, 0x000C0000U),
> + EMIT_MASKWRITE(0XE000A00C, 0x003F003FU, 0x00370000U),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKWRITE(0XE000A00C, 0x003F003FU, 0x00370008U),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKWRITE(0XE000A244, 0x003FFFFFU, 0x000C0000U),
> + EMIT_MASKWRITE(0XE000A00C, 0x003F003FU, 0x003B0004U),
> + EMIT_MASKWRITE(0XE000A248, 0x003FFFFFU, 0x000C0000U),
> + EMIT_MASKWRITE(0XE000A00C, 0x003F003FU, 0x003B0000U),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKWRITE(0XE000A00C, 0x003F003FU, 0x003B0004U),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_post_config_3_0[] = {
> + EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000900, 0x0000000FU, 0x0000000FU),
> + EMIT_MASKWRITE(0XF8000240, 0xFFFFFFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000004, 0x0000FFFFU, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_debug_3_0[] = {
> + EMIT_MASKWRITE(0XF8898FB0, 0xFFFFFFFFU, 0xC5ACCE55U),
> + EMIT_MASKWRITE(0XF8899FB0, 0xFFFFFFFFU, 0xC5ACCE55U),
> + EMIT_MASKWRITE(0XF8809FB0, 0xFFFFFFFFU, 0xC5ACCE55U),
> + EMIT_EXIT(),
> +};
> +
> +int ps7_post_config(void)
> +{
> + return ps7_config(ps7_post_config_3_0);
> +}
> +
> +int ps7_init(void)
> +{
> + int ret;
> +
> + /* MIO init */
> + ret = ps7_config(ps7_mio_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + /* PLL init */
> + ret = ps7_config(ps7_pll_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + /* Clock init */
> + ret = ps7_config(ps7_clock_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + /* DDR init */
> + ret = ps7_config(ps7_ddr_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + /* Peripherals init */
> + ret = ps7_config(ps7_peripherals_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + return PS7_INIT_SUCCESS;
> +}
> diff --git a/configs/ni_sulfur_rev3_defconfig b/configs/ni_sulfur_rev3_defconfig
> new file mode 100644
> index 0000000..51ea087
> --- /dev/null
> +++ b/configs/ni_sulfur_rev3_defconfig
> @@ -0,0 +1,69 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_VENDOR="ni"
> +CONFIG_SYS_CONFIG_NAME="ni_sulfur_rev3"
> +CONFIG_ARCH_ZYNQ=y
> +CONFIG_SYS_TEXT_BASE=0x4000000
> +CONFIG_DEFAULT_DEVICE_TREE="zynq-ni-sulfur-rev3"
> +CONFIG_FIT=y
> +CONFIG_FIT_SIGNATURE=y
> +CONFIG_FIT_VERBOSE=y
> +CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_SPL=y
> +CONFIG_HUSH_PARSER=y
> +CONFIG_SYS_PROMPT="ni-sulfur-rev3> "
> +# CONFIG_CMD_IMLS is not set
> +CONFIG_CMD_MEMTEST=y
> +CONFIG_CMD_MEMINFO=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_DFU=y
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_TFTPPUT=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_DNS=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TPM=y
> +CONFIG_CMD_TPM_TEST=y
> +CONFIG_CMD_EXT2=y
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_DFU_MMC=y
> +CONFIG_DFU_RAM=y
> +CONFIG_DM_I2C=y
> +CONFIG_I2C_CROS_EC_TUNNEL=y
> +CONFIG_DM_I2C_GPIO=y
> +CONFIG_SYS_I2C_CADENCE=y
> +CONFIG_I2C_MUX=y
> +CONFIG_I2C_MUX_PCA954x=y
> +CONFIG_MISC=y
> +CONFIG_CROS_EC=y
> +CONFIG_CROS_EC_I2C=y
> +CONFIG_I2C_EEPROM=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ZYNQ=y
> +CONFIG_ZYNQ_GEM=y
> +CONFIG_ZYNQ_SPI=y
> +CONFIG_TPM_AUTH_SESSIONS=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_ULPI_VIEWPORT=y
> +CONFIG_USB_ULPI=y
> +CONFIG_USB_STORAGE=y
> +CONFIG_USB_GADGET=y
> +CONFIG_CI_UDC=y
> +CONFIG_USB_GADGET_DOWNLOAD=y
> +CONFIG_G_DNL_MANUFACTURER="National Instruments Inc"
> +CONFIG_G_DNL_VENDOR_NUM=0x3923
> +CONFIG_G_DNL_PRODUCT_NUM=0x0301
> +CONFIG_TPM=y
> diff --git a/include/configs/ni_sulfur_rev3.h b/include/configs/ni_sulfur_rev3.h
> new file mode 100644
> index 0000000..1925513
> --- /dev/null
> +++ b/include/configs/ni_sulfur_rev3.h
> @@ -0,0 +1,42 @@
> +/*
> + * (C) Copyright 2017 National Instruments
> + *
> + * Configuration for NI Ettus Research Project Sulfur Rev3
> + * See zynq-common.h for Zynq common configs
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_NI_SULFUR_REV3
> +#define __CONFIG_NI_SULFUR_REV3
> +
> +#define CONFIG_ENV_IS_NOWHERE
> +#include "zynq-common.h"
> +#undef CONFIG_ENV_IS_NOWHERE
> +
> +#define CONFIG_SYS_MMC_ENV_DEV 0
> +#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
> +#define CONFIG_ENV_OFFSET 0xE0000
> +
> +#undef CONFIG_EXTRA_ENV_SETTINGS
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "fit_image=fit.itb\0" \
> + "bootargs=root=/dev/mmcblk0p2 rw rootwait " \
> + "uio_pdrv_genirq.of_id=usrp-uio\0" \
> + "load_addr=0x2000000\0" \
> + "fit_size=0x800000\0" \
> + "fdt_high=0x20000000\0" \
> + "initrd_high=0x20000000\0" \
> + "sdboot=echo Copying FIT from SD to RAM... && " \
> + "load mmc 0 ${load_addr} ${fit_image} && " \
> + "bootm ${load_addr}\0" \
> + "jtagboot=echo TFTPing FIT to RAM... && " \
> + "tftpboot ${load_addr} ${fit_image} && " \
> + "bootm ${load_addr}\0" \
> + "usbboot=if usb start; then " \
> + "echo Copying FIT from USB to RAM... && " \
> + "load usb 0 ${load_addr} ${fit_image} && " \
> + "bootm ${load_addr}; fi\0" \
> + DFU_ALT_INFO
> +
> +#endif /* __CONFIG_NI_SULFUR_REV3 */
>
The rest is just the same as 1/2.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20170629/a9ed840b/attachment.sig>
More information about the U-Boot
mailing list