[U-Boot] [PATCH next 3/3] mx6sabreauto: Update to SPL only mode
Vanessa Maegima
vanessa.maegima at nxp.com
Thu Jun 29 12:33:46 UTC 2017
As mx6sabreauto supports SPL now, all variants can boot using the same
defconfig.
This patch:
- Removes non-SPL targets.
- Renames target to mx6sabreauto_defconfig.
- Renames folder and board files to mx6sabreauto.
- Updates MAINTAINERS, Makefile and Kconfig accordingly.
- Removes .cfg files.
- Adds a README with instructions to build and flash SPL and u-boot.img.
Signed-off-by: Vanessa Maegima <vanessa.maegima at nxp.com>
---
arch/arm/cpu/armv7/mx6/Kconfig | 6 +-
board/freescale/mx6qsabreauto/MAINTAINERS | 9 --
board/freescale/mx6qsabreauto/imximage.cfg | 129 ------------------
board/freescale/mx6qsabreauto/mx6dl.cfg | 130 ------------------
board/freescale/mx6qsabreauto/mx6qp.cfg | 145 ---------------------
.../{mx6qsabreauto => mx6sabreauto}/Kconfig | 6 +-
board/freescale/mx6sabreauto/MAINTAINERS | 7 +
.../{mx6qsabreauto => mx6sabreauto}/Makefile | 2 +-
board/freescale/mx6sabreauto/README | 20 +++
.../mx6sabreauto.c} | 0
configs/mx6dlsabreauto_defconfig | 44 -------
configs/mx6qpsabreauto_defconfig | 43 ------
configs/mx6qsabreauto_defconfig | 44 -------
...reauto_spl_defconfig => mx6sabreauto_defconfig} | 2 +-
.../configs/{mx6qsabreauto.h => mx6sabreauto.h} | 6 +-
15 files changed, 38 insertions(+), 555 deletions(-)
delete mode 100644 board/freescale/mx6qsabreauto/MAINTAINERS
delete mode 100644 board/freescale/mx6qsabreauto/imximage.cfg
delete mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg
delete mode 100644 board/freescale/mx6qsabreauto/mx6qp.cfg
rename board/freescale/{mx6qsabreauto => mx6sabreauto}/Kconfig (54%)
create mode 100644 board/freescale/mx6sabreauto/MAINTAINERS
rename board/freescale/{mx6qsabreauto => mx6sabreauto}/Makefile (85%)
create mode 100644 board/freescale/mx6sabreauto/README
rename board/freescale/{mx6qsabreauto/mx6qsabreauto.c => mx6sabreauto/mx6sabreauto.c} (100%)
delete mode 100644 configs/mx6dlsabreauto_defconfig
delete mode 100644 configs/mx6qpsabreauto_defconfig
delete mode 100644 configs/mx6qsabreauto_defconfig
rename configs/{mx6qsabreauto_spl_defconfig => mx6sabreauto_defconfig} (97%)
rename include/configs/{mx6qsabreauto.h => mx6sabreauto.h} (94%)
diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig
index 0d500aa..4a38dc2 100644
--- a/arch/arm/cpu/armv7/mx6/Kconfig
+++ b/arch/arm/cpu/armv7/mx6/Kconfig
@@ -202,8 +202,8 @@ config TARGET_MX6Q_ICORE_RQS
select SUPPORT_SPL
select SPL_LOAD_FIT
-config TARGET_MX6QSABREAUTO
- bool "mx6qsabreauto"
+config TARGET_MX6SABREAUTO
+ bool "mx6sabreauto"
select BOARD_LATE_INIT
select SUPPORT_SPL
select DM
@@ -413,7 +413,7 @@ source "board/engicam/icorem6/Kconfig"
source "board/engicam/icorem6_rqs/Kconfig"
source "board/engicam/isiotmx6ul/Kconfig"
source "board/freescale/mx6qarm2/Kconfig"
-source "board/freescale/mx6qsabreauto/Kconfig"
+source "board/freescale/mx6sabreauto/Kconfig"
source "board/freescale/mx6sabresd/Kconfig"
source "board/freescale/mx6slevk/Kconfig"
source "board/freescale/mx6sllevk/Kconfig"
diff --git a/board/freescale/mx6qsabreauto/MAINTAINERS b/board/freescale/mx6qsabreauto/MAINTAINERS
deleted file mode 100644
index f148dac..0000000
--- a/board/freescale/mx6qsabreauto/MAINTAINERS
+++ /dev/null
@@ -1,9 +0,0 @@
-MX6QSABREAUTO BOARD
-M: Fabio Estevam <fabio.estevam at nxp.com>
-M: Peng Fan <peng.fan at nxp.com>
-S: Maintained
-F: board/freescale/mx6qsabreauto/
-F: include/configs/mx6qsabreauto.h
-F: configs/mx6dlsabreauto_defconfig
-F: configs/mx6qsabreauto_defconfig
-F: configs/mx6qpsabreauto_defconfig
diff --git a/board/freescale/mx6qsabreauto/imximage.cfg b/board/freescale/mx6qsabreauto/imximage.cfg
deleted file mode 100644
index 16bf473..0000000
--- a/board/freescale/mx6qsabreauto/imximage.cfg
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-/* image version */
-
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM sd
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-DATA 4 0x020e0798 0x000C0000
-DATA 4 0x020e0758 0x00000000
-DATA 4 0x020e0588 0x00000030
-DATA 4 0x020e0594 0x00000030
-DATA 4 0x020e056c 0x00000030
-DATA 4 0x020e0578 0x00000030
-DATA 4 0x020e074c 0x00000030
-DATA 4 0x020e057c 0x00000030
-DATA 4 0x020e058c 0x00000000
-DATA 4 0x020e059c 0x00000030
-DATA 4 0x020e05a0 0x00000030
-DATA 4 0x020e078c 0x00000030
-DATA 4 0x020e0750 0x00020000
-DATA 4 0x020e05a8 0x00000028
-DATA 4 0x020e05b0 0x00000028
-DATA 4 0x020e0524 0x00000028
-DATA 4 0x020e051c 0x00000028
-DATA 4 0x020e0518 0x00000028
-DATA 4 0x020e050c 0x00000028
-DATA 4 0x020e05b8 0x00000028
-DATA 4 0x020e05c0 0x00000028
-DATA 4 0x020e0774 0x00020000
-DATA 4 0x020e0784 0x00000028
-DATA 4 0x020e0788 0x00000028
-DATA 4 0x020e0794 0x00000028
-DATA 4 0x020e079c 0x00000028
-DATA 4 0x020e07a0 0x00000028
-DATA 4 0x020e07a4 0x00000028
-DATA 4 0x020e07a8 0x00000028
-DATA 4 0x020e0748 0x00000028
-DATA 4 0x020e05ac 0x00000028
-DATA 4 0x020e05b4 0x00000028
-DATA 4 0x020e0528 0x00000028
-DATA 4 0x020e0520 0x00000028
-DATA 4 0x020e0514 0x00000028
-DATA 4 0x020e0510 0x00000028
-DATA 4 0x020e05bc 0x00000028
-DATA 4 0x020e05c4 0x00000028
-DATA 4 0x021b0800 0xa1390003
-DATA 4 0x021b080c 0x001F001F
-DATA 4 0x021b0810 0x001F001F
-DATA 4 0x021b480c 0x001F001F
-DATA 4 0x021b4810 0x001F001F
-DATA 4 0x021b083c 0x43260335
-DATA 4 0x021b0840 0x031A030B
-DATA 4 0x021b483c 0x4323033B
-DATA 4 0x021b4840 0x0323026F
-DATA 4 0x021b0848 0x483D4545
-DATA 4 0x021b4848 0x44433E48
-DATA 4 0x021b0850 0x41444840
-DATA 4 0x021b4850 0x4835483E
-DATA 4 0x021b081c 0x33333333
-DATA 4 0x021b0820 0x33333333
-DATA 4 0x021b0824 0x33333333
-DATA 4 0x021b0828 0x33333333
-DATA 4 0x021b481c 0x33333333
-DATA 4 0x021b4820 0x33333333
-DATA 4 0x021b4824 0x33333333
-DATA 4 0x021b4828 0x33333333
-DATA 4 0x021b08b8 0x00000800
-DATA 4 0x021b48b8 0x00000800
-DATA 4 0x021b0004 0x00020036
-DATA 4 0x021b0008 0x09444040
-DATA 4 0x021b000c 0x8A8F7955
-DATA 4 0x021b0010 0xFF328F64
-DATA 4 0x021b0014 0x01FF00DB
-DATA 4 0x021b0018 0x00001740
-DATA 4 0x021b001c 0x00008000
-DATA 4 0x021b002c 0x000026d2
-DATA 4 0x021b0030 0x008F1023
-DATA 4 0x021b0040 0x00000047
-DATA 4 0x021b0000 0x841A0000
-DATA 4 0x021b001c 0x04088032
-DATA 4 0x021b001c 0x00008033
-DATA 4 0x021b001c 0x00048031
-DATA 4 0x021b001c 0x09408030
-DATA 4 0x021b001c 0x04008040
-DATA 4 0x021b0020 0x00005800
-DATA 4 0x021b0818 0x00011117
-DATA 4 0x021b4818 0x00011117
-DATA 4 0x021b0004 0x00025576
-DATA 4 0x021b0404 0x00011006
-DATA 4 0x021b001c 0x00000000
-
-/* set the default clock gate to save power */
-DATA 4 0x020c4068 0x00C03F3F
-DATA 4 0x020c406c 0x0030FC03
-DATA 4 0x020c4070 0x0FFFC000
-DATA 4 0x020c4074 0x3FF00000
-DATA 4 0x020c4078 0xFFFFF300
-DATA 4 0x020c407c 0x0F0000F3
-DATA 4 0x020c4080 0x00000FFF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4 0x020e0010 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4 0x020e0018 0x007F007F
-DATA 4 0x020e001c 0x007F007F
diff --git a/board/freescale/mx6qsabreauto/mx6dl.cfg b/board/freescale/mx6qsabreauto/mx6dl.cfg
deleted file mode 100644
index 89078e5..0000000
--- a/board/freescale/mx6qsabreauto/mx6dl.cfg
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- * Jason Liu <r64343 at freescale.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-/* image version */
-
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
-BOOT_FROM sd
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-DATA 4 0x020e0774 0x000C0000
-DATA 4 0x020e0754 0x00000000
-DATA 4 0x020e04ac 0x00000030
-DATA 4 0x020e04b0 0x00000030
-DATA 4 0x020e0464 0x00000030
-DATA 4 0x020e0490 0x00000030
-DATA 4 0x020e074c 0x00000030
-DATA 4 0x020e0494 0x00000030
-DATA 4 0x020e04a0 0x00000000
-DATA 4 0x020e04b4 0x00000030
-DATA 4 0x020e04b8 0x00000030
-DATA 4 0x020e076c 0x00000030
-DATA 4 0x020e0750 0x00020000
-DATA 4 0x020e04bc 0x00000028
-DATA 4 0x020e04c0 0x00000028
-DATA 4 0x020e04c4 0x00000028
-DATA 4 0x020e04c8 0x00000028
-DATA 4 0x020e04cc 0x00000028
-DATA 4 0x020e04d0 0x00000028
-DATA 4 0x020e04d4 0x00000028
-DATA 4 0x020e04d8 0x00000028
-DATA 4 0x020e0760 0x00020000
-DATA 4 0x020e0764 0x00000028
-DATA 4 0x020e0770 0x00000028
-DATA 4 0x020e0778 0x00000028
-DATA 4 0x020e077c 0x00000028
-DATA 4 0x020e0780 0x00000028
-DATA 4 0x020e0784 0x00000028
-DATA 4 0x020e078c 0x00000028
-DATA 4 0x020e0748 0x00000028
-DATA 4 0x020e0470 0x00000028
-DATA 4 0x020e0474 0x00000028
-DATA 4 0x020e0478 0x00000028
-DATA 4 0x020e047c 0x00000028
-DATA 4 0x020e0480 0x00000028
-DATA 4 0x020e0484 0x00000028
-DATA 4 0x020e0488 0x00000028
-DATA 4 0x020e048c 0x00000028
-DATA 4 0x021b0800 0xa1390003
-DATA 4 0x021b080c 0x001F001F
-DATA 4 0x021b0810 0x001F001F
-DATA 4 0x021b480c 0x001F001F
-DATA 4 0x021b4810 0x001F001F
-DATA 4 0x021b083c 0x42190217
-DATA 4 0x021b0840 0x017B017B
-DATA 4 0x021b483c 0x4176017B
-DATA 4 0x021b4840 0x015F016C
-DATA 4 0x021b0848 0x4C4C4D4C
-DATA 4 0x021b4848 0x4A4D4C48
-DATA 4 0x021b0850 0x3F3F3F40
-DATA 4 0x021b4850 0x3538382E
-DATA 4 0x021b081c 0x33333333
-DATA 4 0x021b0820 0x33333333
-DATA 4 0x021b0824 0x33333333
-DATA 4 0x021b0828 0x33333333
-DATA 4 0x021b481c 0x33333333
-DATA 4 0x021b4820 0x33333333
-DATA 4 0x021b4824 0x33333333
-DATA 4 0x021b4828 0x33333333
-DATA 4 0x021b08b8 0x00000800
-DATA 4 0x021b48b8 0x00000800
-DATA 4 0x021b0004 0x00020025
-DATA 4 0x021b0008 0x00333030
-DATA 4 0x021b000c 0x676B5313
-DATA 4 0x021b0010 0xB66E8B63
-DATA 4 0x021b0014 0x01FF00DB
-DATA 4 0x021b0018 0x00001740
-DATA 4 0x021b001c 0x00008000
-DATA 4 0x021b002c 0x000026d2
-DATA 4 0x021b0030 0x006B1023
-DATA 4 0x021b0040 0x00000047
-DATA 4 0x021b0000 0x841A0000
-DATA 4 0x021b001c 0x04008032
-DATA 4 0x021b001c 0x00008033
-DATA 4 0x021b001c 0x00048031
-DATA 4 0x021b001c 0x05208030
-DATA 4 0x021b001c 0x04008040
-DATA 4 0x021b0020 0x00005800
-DATA 4 0x021b0818 0x00011117
-DATA 4 0x021b4818 0x00011117
-DATA 4 0x021b0004 0x00025565
-DATA 4 0x021b0404 0x00011006
-DATA 4 0x021b001c 0x00000000
-
-/* set the default clock gate to save power */
-DATA 4 0x020c4068 0x00C03F3F
-DATA 4 0x020c406c 0x0030FC03
-DATA 4 0x020c4070 0x0FFFC000
-DATA 4 0x020c4074 0x3FF00000
-DATA 4 0x020c4078 0xFFFFF300
-DATA 4 0x020c407c 0x0F0000C3
-DATA 4 0x020c4080 0x00000FFF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4 0x020e0010 0xF00000CF
-/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
-DATA 4 0x020e0018 0x007F007F
-DATA 4 0x020e001c 0x007F007F
diff --git a/board/freescale/mx6qsabreauto/mx6qp.cfg b/board/freescale/mx6qsabreauto/mx6qp.cfg
deleted file mode 100644
index 2298c77..0000000
--- a/board/freescale/mx6qsabreauto/mx6qp.cfg
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Copyright (C) 2015 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
-/* image version */
-
-#define __ASSEMBLY__
-#include <config.h>
-
-IMAGE_VERSION 2
-
-/*
- * Boot Device : one of spi, sd, eimnor, nand, sata:
- * spinor: flash_offset: 0x0400
- * nand: flash_offset: 0x0400
- * sata: flash_offset: 0x0400
- * sd/mmc: flash_offset: 0x0400
- * eimnor: flash_offset: 0x1000
- */
-BOOT_FROM sd
-
-/*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
-DATA 4 0x020e0798 0x000C0000
-DATA 4 0x020e0758 0x00000000
-DATA 4 0x020e0588 0x00000030
-DATA 4 0x020e0594 0x00000030
-DATA 4 0x020e056c 0x00000030
-DATA 4 0x020e0578 0x00000030
-DATA 4 0x020e074c 0x00000030
-DATA 4 0x020e057c 0x00000030
-DATA 4 0x020e058c 0x00000000
-DATA 4 0x020e059c 0x00000030
-DATA 4 0x020e05a0 0x00000030
-DATA 4 0x020e078c 0x00000030
-DATA 4 0x020e0750 0x00020000
-DATA 4 0x020e05a8 0x00000030
-DATA 4 0x020e05b0 0x00000030
-DATA 4 0x020e0524 0x00000030
-DATA 4 0x020e051c 0x00000030
-DATA 4 0x020e0518 0x00000030
-DATA 4 0x020e050c 0x00000030
-DATA 4 0x020e05b8 0x00000030
-DATA 4 0x020e05c0 0x00000030
-DATA 4 0x020e0774 0x00020000
-DATA 4 0x020e0784 0x00000030
-DATA 4 0x020e0788 0x00000030
-DATA 4 0x020e0794 0x00000030
-DATA 4 0x020e079c 0x00000030
-DATA 4 0x020e07a0 0x00000030
-DATA 4 0x020e07a4 0x00000030
-DATA 4 0x020e07a8 0x00000030
-DATA 4 0x020e0748 0x00000030
-DATA 4 0x020e05ac 0x00000030
-DATA 4 0x020e05b4 0x00000030
-DATA 4 0x020e0528 0x00000030
-DATA 4 0x020e0520 0x00000030
-DATA 4 0x020e0514 0x00000030
-DATA 4 0x020e0510 0x00000030
-DATA 4 0x020e05bc 0x00000030
-DATA 4 0x020e05c4 0x00000030
-DATA 4 0x021b0800 0xa1390003
-DATA 4 0x021b080c 0x001b001e
-DATA 4 0x021b0810 0x002e0029
-DATA 4 0x021b480c 0x001b002a
-DATA 4 0x021b4810 0x0019002c
-DATA 4 0x021b083c 0x43240334
-DATA 4 0x021b0840 0x0324031a
-DATA 4 0x021b483c 0x43340344
-DATA 4 0x021b4840 0x03280276
-DATA 4 0x021b0848 0x44383A3E
-DATA 4 0x021b4848 0x3C3C3846
-DATA 4 0x021b0850 0x2e303230
-DATA 4 0x021b4850 0x38283E34
-DATA 4 0x021b081c 0x33333333
-DATA 4 0x021b0820 0x33333333
-DATA 4 0x021b0824 0x33333333
-DATA 4 0x021b0828 0x33333333
-DATA 4 0x021b481c 0x33333333
-DATA 4 0x021b4820 0x33333333
-DATA 4 0x021b4824 0x33333333
-DATA 4 0x021b4828 0x33333333
-DATA 4 0x021b08c0 0x24912492
-DATA 4 0x021b48c0 0x24912492
-DATA 4 0x021b08b8 0x00000800
-DATA 4 0x021b48b8 0x00000800
-DATA 4 0x021b0004 0x00020036
-DATA 4 0x021b0008 0x09444040
-DATA 4 0x021b000c 0x898E7955
-DATA 4 0x021b0010 0xFF328F64
-DATA 4 0x021b0014 0x01FF00DB
-DATA 4 0x021b0018 0x00001740
-DATA 4 0x021b001c 0x00008000
-
-DATA 4 0x021b002c 0x000026d2
-DATA 4 0x021b0030 0x008E1023
-DATA 4 0x021b0040 0x00000047
-DATA 4 0x021b0400 0x14420000
-DATA 4 0x021b0000 0x841A0000
-DATA 4 0x00bb0008 0x00000004
-DATA 4 0x00bb000c 0x2891E41A
-DATA 4 0x00bb0038 0x00000564
-DATA 4 0x00bb0014 0x00000040
-DATA 4 0x00bb0028 0x00000020
-DATA 4 0x00bb002c 0x00000020
-DATA 4 0x021b001c 0x04088032
-DATA 4 0x021b001c 0x00008033
-DATA 4 0x021b001c 0x00048031
-DATA 4 0x021b001c 0x09408030
-DATA 4 0x021b001c 0x04008040
-DATA 4 0x021b0020 0x00005800
-DATA 4 0x021b0818 0x00011117
-DATA 4 0x021b4818 0x00011117
-DATA 4 0x021b0004 0x00025576
-DATA 4 0x021b0404 0x00011006
-DATA 4 0x021b001c 0x00000000
-/* set the default clock gate to save power */
-DATA 4, 0x020c4068, 0x00C03F3F
-DATA 4, 0x020c406c, 0x0030FC03
-DATA 4, 0x020c4070, 0x0FFFC000
-DATA 4, 0x020c4074, 0x3FF00000
-DATA 4, 0x020c4078, 0xFFFFF300
-DATA 4, 0x020c407c, 0x0F0000F3
-DATA 4, 0x020c4080, 0x00000FFF
-
-/* enable AXI cache for VDOA/VPU/IPU */
-DATA 4, 0x020e0010, 0xF00000CF
-/* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */
-DATA 4, 0x020e0018, 0x77177717
-DATA 4, 0x020e001c, 0x77177717
diff --git a/board/freescale/mx6qsabreauto/Kconfig b/board/freescale/mx6sabreauto/Kconfig
similarity index 54%
rename from board/freescale/mx6qsabreauto/Kconfig
rename to board/freescale/mx6sabreauto/Kconfig
index e579c0f..5b4faf6 100644
--- a/board/freescale/mx6qsabreauto/Kconfig
+++ b/board/freescale/mx6sabreauto/Kconfig
@@ -1,12 +1,12 @@
-if TARGET_MX6QSABREAUTO
+if TARGET_MX6SABREAUTO
config SYS_BOARD
- default "mx6qsabreauto"
+ default "mx6sabreauto"
config SYS_VENDOR
default "freescale"
config SYS_CONFIG_NAME
- default "mx6qsabreauto"
+ default "mx6sabreauto"
endif
diff --git a/board/freescale/mx6sabreauto/MAINTAINERS b/board/freescale/mx6sabreauto/MAINTAINERS
new file mode 100644
index 0000000..a89f05a
--- /dev/null
+++ b/board/freescale/mx6sabreauto/MAINTAINERS
@@ -0,0 +1,7 @@
+MX6SABREAUTO BOARD
+M: Fabio Estevam <fabio.estevam at nxp.com>
+M: Peng Fan <peng.fan at nxp.com>
+S: Maintained
+F: board/freescale/mx6sabreauto/
+F: include/configs/mx6sabreauto.h
+F: configs/mx6sabreauto_defconfig
diff --git a/board/freescale/mx6qsabreauto/Makefile b/board/freescale/mx6sabreauto/Makefile
similarity index 85%
rename from board/freescale/mx6qsabreauto/Makefile
rename to board/freescale/mx6sabreauto/Makefile
index ac5bc81..87f4ec0 100644
--- a/board/freescale/mx6qsabreauto/Makefile
+++ b/board/freescale/mx6sabreauto/Makefile
@@ -6,4 +6,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-y := mx6qsabreauto.o
+obj-y := mx6sabreauto.o
diff --git a/board/freescale/mx6sabreauto/README b/board/freescale/mx6sabreauto/README
new file mode 100644
index 0000000..7e4596a
--- /dev/null
+++ b/board/freescale/mx6sabreauto/README
@@ -0,0 +1,20 @@
+How to use and build U-Boot on mx6sabreauto
+-------------------------------------------
+
+mx6sabreauto_defconfig target supports mx6q/mx6dl/mx6qp sabreauto variants.
+
+In order to build it:
+
+$ make mx6sabreauto_defconfig
+
+$ make
+
+This will generate the SPL and u-boot.img binaries.
+
+- Flash the SPL binary into the SD card:
+
+$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync
+
+- Flash the u-boot.img binary into the SD card:
+
+$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6sabreauto/mx6sabreauto.c
similarity index 100%
rename from board/freescale/mx6qsabreauto/mx6qsabreauto.c
rename to board/freescale/mx6sabreauto/mx6sabreauto.c
diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig
deleted file mode 100644
index ba5ab8a..0000000
--- a/configs/mx6dlsabreauto_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6QSABREAUTO=y
-CONFIG_VIDEO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SF=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="FSL"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
diff --git a/configs/mx6qpsabreauto_defconfig b/configs/mx6qpsabreauto_defconfig
deleted file mode 100644
index 96a248e..0000000
--- a/configs/mx6qpsabreauto_defconfig
+++ /dev/null
@@ -1,43 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6QSABREAUTO=y
-CONFIG_VIDEO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6qp.cfg,MX6Q"
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SF=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="FSL"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig
deleted file mode 100644
index 015207d..0000000
--- a/configs/mx6qsabreauto_defconfig
+++ /dev/null
@@ -1,44 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TARGET_MX6QSABREAUTO=y
-CONFIG_VIDEO=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
-CONFIG_BOOTDELAY=3
-# CONFIG_CONSOLE_MUX is not set
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DFU=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_DFU_MMC=y
-CONFIG_DFU_SF=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_CI_UDC=y
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_G_DNL_MANUFACTURER="FSL"
-CONFIG_G_DNL_VENDOR_NUM=0x0525
-CONFIG_G_DNL_PRODUCT_NUM=0xa4a5
-# CONFIG_VIDEO_SW_CURSOR is not set
-CONFIG_OF_LIBFDT=y
diff --git a/configs/mx6qsabreauto_spl_defconfig b/configs/mx6sabreauto_defconfig
similarity index 97%
rename from configs/mx6qsabreauto_spl_defconfig
rename to configs/mx6sabreauto_defconfig
index ce2d1d2..c1b3bbf 100644
--- a/configs/mx6qsabreauto_spl_defconfig
+++ b/configs/mx6sabreauto_defconfig
@@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y
CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_TARGET_MX6SABREAUTO=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6sabreauto.h
similarity index 94%
rename from include/configs/mx6qsabreauto.h
rename to include/configs/mx6sabreauto.h
index 99b48ca..fd0d5ce 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -6,8 +6,8 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#ifndef __MX6QSABREAUTO_CONFIG_H
-#define __MX6QSABREAUTO_CONFIG_H
+#ifndef __MX6SABREAUTO_CONFIG_H
+#define __MX6SABREAUTO_CONFIG_H
#ifdef CONFIG_SPL
#include "imx6_spl.h"
@@ -76,4 +76,4 @@
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
-#endif /* __MX6QSABREAUTO_CONFIG_H */
+#endif /* __MX6SABREAUTO_CONFIG_H */
--
2.7.4
More information about the U-Boot
mailing list