[U-Boot] [PATCH 08/17] armv8: fsl: move ccn504 code into FSL Makefile

[Andre Przywara]

The generic ARMv8 assembly code contains routines for setting up
a CCN interconnect, though the Freescale SoCs are the only user.
Link this code only for Freescale targets, this saves some precious
bytes in the chronically tight SPL.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/Makefile | 1 +
 arch/arm/lib/Makefile                      | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index c9ab93e..ca09973 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -7,6 +7,7 @@
 obj-y += cpu.o
 obj-y += lowlevel.o
 obj-y += soc.o
+obj-y += ccn504.o
 obj-$(CONFIG_MP) += mp.o
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
 obj-$(CONFIG_SPL) += spl.o
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 71de1ca..60ffb4a 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -43,7 +43,6 @@ obj-y	+= stack.o
 ifdef CONFIG_CPU_V7M
 obj-y	+= interrupts_m.o
 else ifdef CONFIG_ARM64
-obj-y	+= ccn504.o
 ifneq ($(CONFIG_GICV2)$(CONFIG_GICV3),)
 obj-y	+= gic_64.o
 endif
-- 
2.8.2