[U-Boot] [PATCH 01/12] sunxi: Add initial support for R40
Chen-Yu Tsai
wens at csie.org
Wed Mar 1 07:04:36 UTC 2017
The R40 is the successor to the A20. It is a hybrid of the A20, A33
and the H3.
The R40's PIO controller is compatible with the A20,
Reuse the A20 UART and I2C muxing code by adding the R40's macro.
The display pipeline is the newer DE 2.0 variant.
Block enabling video on R40 for now.
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
arch/arm/mach-sunxi/board.c | 10 +++++++---
arch/arm/mach-sunxi/cpu_info.c | 2 ++
board/sunxi/Kconfig | 9 +++++++--
board/sunxi/board.c | 19 ++++++++++++++-----
4 files changed, 30 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 5e03d039433a..5a74c9717d84 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -69,12 +69,14 @@ struct mm_region *mem_map = sunxi_mem_map;
static int gpio_init(void)
{
#if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+ defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
/* disable GPB22,23 as uart0 tx,rx to avoid conflict */
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
#endif
-#if defined(CONFIG_MACH_SUN8I)
+#if defined(CONFIG_MACH_SUN8I) && !defined(CONFIG_MACH_SUN8I_R40)
sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0);
#else
@@ -82,7 +84,9 @@ static int gpio_init(void)
sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);
#endif
sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
-#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I))
+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || \
+ defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40))
sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c
index 85633ccec216..7851de299ab5 100644
--- a/arch/arm/mach-sunxi/cpu_info.c
+++ b/arch/arm/mach-sunxi/cpu_info.c
@@ -87,6 +87,8 @@ int print_cpuinfo(void)
printf("CPU: Allwinner A83T (SUN8I %04x)\n", sunxi_get_sram_id());
#elif defined CONFIG_MACH_SUN8I_H3
printf("CPU: Allwinner H3 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_R40
+ printf("CPU: Allwinner R40 (SUN8I %04x)\n", sunxi_get_sram_id());
#elif defined CONFIG_MACH_SUN9I
puts("CPU: Allwinner A80 (SUN9I)\n");
#elif defined CONFIG_MACH_SUN50I
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 3e0e2624737e..8e8b9cd0d5fd 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -132,6 +132,11 @@ config MACH_SUN8I_H3
select MACH_SUNXI_H3_H5
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+config MACH_SUN8I_R40
+ bool "sun8i (Allwinner R40)"
+ select CPU_V7
+ select SUNXI_GEN_SUN6I
+
config MACH_SUN9I
bool "sun9i (Allwinner A80)"
select CPU_V7
@@ -157,7 +162,7 @@ endchoice
# The sun8i SoCs share a lot, this helps to avoid a lot of "if A23 || A33"
config MACH_SUN8I
bool
- default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T
+ default y if MACH_SUN8I_A23 || MACH_SUN8I_A33 || MACH_SUNXI_H3_H5 || MACH_SUN8I_A83T || MACH_SUN8I_R40
config RESERVE_ALLWINNER_BOOT0_HEADER
bool "reserve space for Allwinner boot0 header"
@@ -510,7 +515,7 @@ config AXP_GPIO
config VIDEO
bool "Enable graphical uboot console on HDMI, LCD or VGA"
- depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN9I && !MACH_SUN50I
+ depends on !MACH_SUN8I_A83T && !MACH_SUNXI_H3_H5 && !MACH_SUN8I_R40 && !MACH_SUN9I && !MACH_SUN50I
default y
---help---
Say Y here to add support for using a cfb console on the HDMI, LCD
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index b9660128e5e7..495cb591a9fb 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -394,7 +394,10 @@ int board_mmc_init(bd_t *bis)
void i2c_init_board(void)
{
#ifdef CONFIG_I2C0_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+ defined(CONFIG_MACH_SUN5I) || \
+ defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
clock_twi_onoff(0, 1);
@@ -410,7 +413,9 @@ void i2c_init_board(void)
#endif
#ifdef CONFIG_I2C1_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+ defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
clock_twi_onoff(1, 1);
@@ -430,7 +435,9 @@ void i2c_init_board(void)
#endif
#ifdef CONFIG_I2C2_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+ defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
clock_twi_onoff(2, 1);
@@ -454,7 +461,8 @@ void i2c_init_board(void)
sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
clock_twi_onoff(3, 1);
-#elif defined(CONFIG_MACH_SUN7I)
+#elif defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
clock_twi_onoff(3, 1);
@@ -462,7 +470,8 @@ void i2c_init_board(void)
#endif
#ifdef CONFIG_I2C4_ENABLE
-#if defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN7I) || \
+ defined(CONFIG_MACH_SUN8I_R40)
sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
clock_twi_onoff(4, 1);
--
2.11.0
More information about the U-Boot
mailing list