[U-Boot] [PATCH v3 3/9] sunxi: CONFIG_DM_ALLOW_MULTIPLE_DRIVERS for gpio/pinctrl binding

Philipp Tomsich philipp.tomsich at theobroma-systems.com
Wed Mar 1 21:20:02 UTC 2017


Our gpio and pinctrl driver need to be bound against the same
node. While this can be done by hand (i.e. explicitly looking up the
driver, creating the driver-data and binding the device), it is much
easier done when the new option for the binding of multiple drivers
against a single node is configured.

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---
 drivers/gpio/sunxi_gpio.c             | 4 ++--
 drivers/pinctrl/sunxi/pinctrl-sunxi.c | 8 ++++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/sunxi_gpio.c b/drivers/gpio/sunxi_gpio.c
index fd0c1ac..cbec1b9 100644
--- a/drivers/gpio/sunxi_gpio.c
+++ b/drivers/gpio/sunxi_gpio.c
@@ -349,7 +349,7 @@ static const struct udevice_id sunxi_gpio_ids[] = {
 	ID("allwinner,sun8i-a83t-pinctrl",	a_all),
 	ID("allwinner,sun8i-h3-pinctrl",	a_all),
 	ID("allwinner,sun9i-a80-pinctrl",	a_all),
-#if !defined(CONFIG_SUNXI_PINCTRL)
+#if !defined(CONFIG_SUNXI_PINCTRL) || defined(CONFIG_DM_ALLOW_MULTIPLE_DRIVERS)
 	/* This is not strictly correct for the A64, as it is missing
 	 * bank 'A'. Yet, the register layout in the pinctrl block is
 	 * backward compatible and any accesses to the registers that
@@ -362,7 +362,7 @@ static const struct udevice_id sunxi_gpio_ids[] = {
 	ID("allwinner,sun8i-a83t-r-pinctrl",	l_1),
 	ID("allwinner,sun8i-h3-r-pinctrl",	l_1),
 	ID("allwinner,sun9i-a80-r-pinctrl",	l_3),
-#if !defined(CONFIG_SUNXI_PINCTRL)
+#if !defined(CONFIG_SUNXI_PINCTRL) || defined(CONFIG_DM_ALLOW_MULTIPLE_DRIVERS)
 	ID("allwinner,sun50i-a64-r-pinctrl",	l_1),
 #endif
 	{ }
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 1e659fc..dc1a1f7 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -16,7 +16,9 @@
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/gpio.h>
+#if defined(CONFIG_DM_GPIO) && !defined(CONFIG_DM_ALLOW_MULTIPLE_DRIVERS)
 #include <asm/arch/gpio-internal.h>
+#endif
 #include <dm/device-internal.h>
 #include <dm/lists.h>
 #include <dm/pinctrl.h>
@@ -29,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 struct sunxi_pctrl_priv {
 	void *base;
-#if defined(CONFIG_DM_GPIO)
+#if defined(CONFIG_DM_GPIO) && !defined(CONFIG_DM_ALLOW_MULTIPLE_DRIVERS)
 	struct sunxi_gpio_soc_data gpio_soc_data;
 	struct udevice *gpio_dev;
 #endif
@@ -251,6 +253,7 @@ static int sunxi_pctrl_set_state(struct udevice *dev, struct udevice *config)
 	return 0;
 }
 
+#if defined(CONFIG_DM_GPIO) && !defined(CONFIG_DM_ALLOW_MULTIPLE_DRIVERS)
 static inline void soc_data_from_desc(const struct sunxi_pinctrl_desc *data,
 				      struct sunxi_gpio_soc_data *soc_data)
 {
@@ -270,10 +273,11 @@ static inline void soc_data_from_desc(const struct sunxi_pinctrl_desc *data,
 	soc_data->start = low;
 	soc_data->no_banks = high - low + 1;
 }
+#endif
 
 static int sunxi_pctrl_bind_gpio(struct udevice *dev)
 {
-#if defined(CONFIG_DM_GPIO)
+#if defined(CONFIG_DM_GPIO) && !defined(CONFIG_DM_ALLOW_MULTIPLE_DRIVERS)
 	struct sunxi_pctrl_priv *priv = dev_get_priv(dev);
 	const struct sunxi_pinctrl_desc *data =
 		(struct sunxi_pinctrl_desc *)dev_get_driver_data(dev);
-- 
1.9.1



More information about the U-Boot mailing list