[U-Boot] [PATCH][v2] armv8:ls2080a: Reorganise NAND_BOOT code in config flag

[Santan Kumar]

Add CONFIG_NAND_BOOT config flag to organise
NAND_BOOT specific code in config flag like
-nand-boot specfic errata errata_rcw_src()
-CONFIG_SYS_NAND_U_BOOT_DST,etc

Signed-off-by: Santan Kumar <santan.kumar at nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain at nxp.com>
Signed-off-by: Abhimanyu Saini <abhimanyu.saini at nxp.com>
---
Changes for v2:
 Rebased to latest codebase
 Incorporated York's comments to defined CONFIG_NAND_BOOT
 in new line

 arch/arm/cpu/armv8/fsl-layerscape/soc.c | 2 +-
 configs/ls2080aqds_nand_defconfig       | 1 +
 configs/ls2080ardb_nand_defconfig       | 1 +
 include/configs/ls2080a_common.h        | 5 +++++
 include/configs/ls2080aqds.h            | 4 +++-
 5 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 9489f85..fa68baf 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -134,7 +134,7 @@ void erratum_a009635(void)
 
 static void erratum_rcw_src(void)
 {
-#if defined(CONFIG_SPL)
+#if defined(CONFIG_SPL) && defined(CONFIG_NAND_BOOT)
 	u32 __iomem *dcfg_ccsr = (u32 __iomem *)DCFG_BASE;
 	u32 __iomem *dcfg_dcsr = (u32 __iomem *)DCFG_DCSR_BASE;
 	u32 val;
diff --git a/configs/ls2080aqds_nand_defconfig b/configs/ls2080aqds_nand_defconfig
index 8910938..bc0b9b1 100644
--- a/configs/ls2080aqds_nand_defconfig
+++ b/configs/ls2080aqds_nand_defconfig
@@ -12,6 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_NAND_BOOT=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
diff --git a/configs/ls2080ardb_nand_defconfig b/configs/ls2080ardb_nand_defconfig
index 8223111..d449190 100644
--- a/configs/ls2080ardb_nand_defconfig
+++ b/configs/ls2080ardb_nand_defconfig
@@ -12,6 +12,7 @@ CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_NAND_BOOT=y
 CONFIG_SYS_EXTRA_OPTIONS="NAND, LS2080A"
 CONFIG_BOOTDELAY=10
 CONFIG_SPL=y
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 4173d9a..ae72939 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -216,6 +216,7 @@ unsigned long long get_qixis_addr(void);
 
 #define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
+#ifdef CONFIG_SPL
 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x00100000
 #define CONFIG_SPL_FRAMEWORK
@@ -225,11 +226,15 @@ unsigned long long get_qixis_addr(void);
 #define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
 #define CONFIG_SPL_TEXT_BASE		0x1800a000
 
+#ifdef CONFIG_NAND_BOOT
+#define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x80400000
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
+#endif
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
 #define CONFIG_SYS_MONITOR_LEN		(640 * 1024)
+#endif
 
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 08d1586..93f6b51 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -197,7 +197,8 @@ unsigned long get_board_ddr_clk(void);
 					FTIM2_GPCM_TWP(0x3E))
 #define CONFIG_SYS_CS3_FTIM3		0x0
 
-#if defined(CONFIG_SPL) && defined(CONFIG_NAND)
+#if defined(CONFIG_SPL)
+#if defined(CONFIG_NAND_BOOT)
 #define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR0_CSPR_EARLY
 #define CONFIG_SYS_CSPR1_FINAL		CONFIG_SYS_NOR0_CSPR
@@ -233,6 +234,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SPL_PAD_TO		0x20000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 * 1024)
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 * 1024)
+#endif
 #else
 #define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
 #define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR_EARLY
-- 
1.9.1