[U-Boot] [PATCH 4/5] Kconfig: fsl-ppa: support load PPA from eMMC/SD and NAND Flash

[Zhiqiang Hou]

From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>

Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
 arch/arm/cpu/armv8/fsl-layerscape/Kconfig | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index adccdf1..6d2dd15 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -122,6 +122,8 @@ config FSL_LS_PPA
 choice
 	prompt "FSL Layerscape PPA firmware loading-media select"
 	depends on FSL_LS_PPA
+	default SYS_LS_PPA_FW_IN_MMC if SD_BOOT
+	default SYS_LS_PPA_FW_IN_NAND if NAND_BOOT
 	default SYS_LS_PPA_FW_IN_XIP
 
 config SYS_LS_PPA_FW_IN_XIP
@@ -130,12 +132,24 @@ config SYS_LS_PPA_FW_IN_XIP
 	  Say Y here if the PPA firmware locate at XIP flash, such
 	  as NOR or QSPI flash.
 
+config SYS_LS_PPA_FW_IN_MMC
+	bool "eMMC or SD Card"
+	help
+	  Say Y here if the PPA firmware locate at eMMC/SD card.
+
+config SYS_LS_PPA_FW_IN_NAND
+	bool "NAND"
+	help
+	  Say Y here if the PPA firmware locate at NAND flash.
+
 endchoice
 
 config SYS_LS_PPA_FW_ADDR
 	hex "Address of PPA firmware loading from"
 	depends on FSL_LS_PPA
 	default 0x40500000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x500000 if SYS_LS_PPA_FW_IN_MMC
+	default 0x500000 if SYS_LS_PPA_FW_IN_NAND
 	default 0x60500000 if SYS_LS_PPA_FW_IN_XIP
 	help
 	  If the PPA firmware locate at XIP flash, such as NOR or
-- 
2.1.0.27.g96db324