[U-Boot] [PATCH 04/17] SPL: FIT: factor out spl_load_fit_image()
Andrew F. Davis
afd at ti.com
Fri Mar 3 16:56:21 UTC 2017
On 02/28/2017 08:25 PM, Andre Przywara wrote:
> At the moment we load two images from a FIT image: the actual U-Boot
> image and the DTB. Both times we have very similar code to deal with
> alignment requirement the media we load from imposes upon us.
> Factor out this code into a new function, which we just call twice.
>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
> ---
Acked-by: Andrew F. Davis <afd at ti.com>
+Franklin,
This patch, and #12 look like something you would be interested in for
your 66AK2G0x work.
Andrew
> common/spl/spl_fit.c | 129 +++++++++++++++++++++++----------------------------
> 1 file changed, 57 insertions(+), 72 deletions(-)
>
> diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
> index 572a5db..ad5ba15 100644
> --- a/common/spl/spl_fit.c
> +++ b/common/spl/spl_fit.c
> @@ -18,7 +18,7 @@ static ulong fdt_getprop_u32(const void *fdt, int node, const char *prop)
>
> cell = fdt_getprop(fdt, node, prop, &len);
> if (len != sizeof(*cell))
> - return -1U;
> + return -1UL;
> return fdt32_to_cpu(*cell);
> }
>
> @@ -139,19 +139,63 @@ static int get_aligned_image_size(struct spl_load_info *info, int data_size,
> return (data_size + info->bl_len - 1) / info->bl_len;
> }
>
> +static int spl_load_fit_image(struct spl_load_info *info, ulong sector,
> + void *fit, ulong base_offset, int node,
> + struct spl_image_info *image_info)
> +{
> + ulong offset;
> + size_t length;
> + ulong load_addr, load_ptr, entry;
> + void *src;
> + ulong overhead;
> + int nr_sectors;
> + int align_len = ARCH_DMA_MINALIGN - 1;
> +
> + offset = fdt_getprop_u32(fit, node, "data-offset") + base_offset;
> + length = fdt_getprop_u32(fit, node, "data-size");
> + load_addr = fdt_getprop_u32(fit, node, "load");
> + if (load_addr == -1UL && image_info)
> + load_addr = image_info->load_addr;
> + load_ptr = (load_addr + align_len) & ~align_len;
> + entry = fdt_getprop_u32(fit, node, "entry");
> +
> + overhead = get_aligned_image_overhead(info, offset);
> + nr_sectors = get_aligned_image_size(info, length, offset);
> +
> + if (info->read(info, sector + get_aligned_image_offset(info, offset),
> + nr_sectors, (void*)load_ptr) != nr_sectors)
> + return -EIO;
> + debug("image: dst=%lx, offset=%lx, size=%lx\n", load_ptr, offset,
> + (unsigned long)length);
> +
> + src = (void *)load_ptr + overhead;
> +#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
> + board_fit_image_post_process(&src, &length);
> +#endif
> +
> + memcpy((void*)load_addr, src, length);
> +
> + if (image_info) {
> + image_info->load_addr = load_addr;
> + image_info->size = length;
> + if (entry == -1UL)
> + image_info->entry_point = load_addr;
> + else
> + image_info->entry_point = entry;
> + }
> +
> + return 0;
> +}
> +
> int spl_load_simple_fit(struct spl_image_info *spl_image,
> struct spl_load_info *info, ulong sector, void *fit)
> {
> int sectors;
> - ulong size, load;
> + ulong size;
> unsigned long count;
> + struct spl_image_info image_info;
> int node, images;
> - void *load_ptr;
> - int fdt_offset, fdt_len;
> - int data_offset, data_size;
> int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
> - int src_sector;
> - void *dst, *src;
>
> /*
> * Figure out where the external images start. This is the base for the
> @@ -203,82 +247,23 @@ int spl_load_simple_fit(struct spl_image_info *spl_image,
> return -1;
> }
>
> - /* Get its information and set up the spl_image structure */
> - data_offset = fdt_getprop_u32(fit, node, "data-offset");
> - data_size = fdt_getprop_u32(fit, node, "data-size");
> - load = fdt_getprop_u32(fit, node, "load");
> - debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
> - spl_image->load_addr = load;
> - spl_image->entry_point = load;
> + /* Load the image and set up the spl_image structure */
> + spl_load_fit_image(info, sector, fit, base_offset, node, spl_image);
> spl_image->os = IH_OS_U_BOOT;
>
> - /*
> - * Work out where to place the image. We read it so that the first
> - * byte will be at 'load'. This may mean we need to load it starting
> - * before then, since we can only read whole blocks.
> - */
> - data_offset += base_offset;
> - sectors = get_aligned_image_size(info, data_size, data_offset);
> - load_ptr = (void *)load;
> - debug("U-Boot size %x, data %p\n", data_size, load_ptr);
> - dst = load_ptr;
> -
> - /* Read the image */
> - src_sector = sector + get_aligned_image_offset(info, data_offset);
> - debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n",
> - dst, src_sector, sectors);
> - count = info->read(info, src_sector, sectors, dst);
> - if (count != sectors)
> - return -EIO;
> - debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset,
> - data_size);
> - src = dst + get_aligned_image_overhead(info, data_offset);
> -
> -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
> - board_fit_image_post_process((void **)&src, (size_t *)&data_size);
> -#endif
> -
> - memcpy(dst, src, data_size);
> -
> /* Figure out which device tree the board wants to use */
> node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
> if (node < 0) {
> debug("%s: cannot find FDT node\n", __func__);
> return node;
> }
> - fdt_offset = fdt_getprop_u32(fit, node, "data-offset");
> - fdt_len = fdt_getprop_u32(fit, node, "data-size");
> -
> - /*
> - * Read the device tree and place it after the image. There may be
> - * some extra data before it since we can only read entire blocks.
> - * And also align the destination address to ARCH_DMA_MINALIGN.
> - */
> - dst = (void *)((load + data_size + align_len) & ~align_len);
> - fdt_offset += base_offset;
> - sectors = get_aligned_image_size(info, fdt_len, fdt_offset);
> - src_sector = sector + get_aligned_image_offset(info, fdt_offset);
> - count = info->read(info, src_sector, sectors, dst);
> - debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n",
> - dst, src_sector, sectors);
> - if (count != sectors)
> - return -EIO;
>
> /*
> - * Copy the device tree so that it starts immediately after the image.
> - * After this we will have the U-Boot image and its device tree ready
> - * for us to start.
> + * Read the device tree and place it after the image.
> + * Align the destination address to ARCH_DMA_MINALIGN.
> */
> - debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset,
> - fdt_len);
> - src = dst + get_aligned_image_overhead(info, fdt_offset);
> - dst = load_ptr + data_size;
> -
> -#ifdef CONFIG_SPL_FIT_IMAGE_POST_PROCESS
> - board_fit_image_post_process((void **)&src, (size_t *)&fdt_len);
> -#endif
> -
> - memcpy(dst, src, fdt_len);
> + image_info.load_addr = spl_image->load_addr + spl_image->size;
> + spl_load_fit_image(info, sector, fit, base_offset, node, &image_info);
>
> return 0;
> }
>
More information about the U-Boot
mailing list