[U-Boot] [PATCH 3/5] fsl PPA: add support PPA image loading from NAND and SD

[Z.Q. Hou]

Hi York,

Thanks a lot for your comments!

> -----Original Message-----
> From: york sun
> Sent: Saturday, March 04, 2017 12:51 AM
> To: Z.Q. Hou <zhiqiang.hou at nxp.com>; u-boot at lists.denx.de;
> oss at buserror.net; Mingkai.hu at freescale.com; sjg at chromium.org; Xiaobo
> Xie <xiaobo.xie at nxp.com>
> Subject: Re: [PATCH 3/5] fsl PPA: add support PPA image loading from NAND
> and SD
> 
> On 03/03/2017 05:45 AM, Zhiqiang Hou wrote:
> > From: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> >
> > Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> > ---
> >  arch/arm/cpu/armv8/fsl-layerscape/ppa.c | 118
> > +++++++++++++++++++++++++++++++-
> >  1 file changed, 117 insertions(+), 1 deletion(-)
> 
> <snip>
> 
> >
> >  #ifdef CONFIG_SYS_LS_PPA_FW_IN_XIP
> >  	ppa_fit_addr = (void *)CONFIG_SYS_LS_PPA_FW_ADDR;
> > +	debug("%s: PPA image load from XIP\n", __func__); #else /*
> > +!CONFIG_SYS_LS_PPA_FW_IN_XIP */
> > +	size_t fw_length, fdt_header_len = sizeof(struct fdt_header);
> > +
> > +	/* Copy PPA image from MMC/SD/NAND to allocated memory */
> #ifdef
> > +CONFIG_SYS_LS_PPA_FW_IN_MMC
> > +	struct mmc *mmc;
> > +	int dev = CONFIG_SYS_MMC_ENV_DEV;
> > +	struct fdt_header *fitp;
> > +	u32 cnt;
> > +	u32 blk = CONFIG_SYS_LS_PPA_FW_ADDR / 512;
> > +
> > +	debug("%s: PPA image load from eMMC/SD\n", __func__);
> > +
> > +	mmc_initialize(gd->bd);
> > +	mmc = find_mmc_device(dev);
> > +	if (!mmc) {
> > +		printf("PPA: MMC cannot find device for PPA firmware\n");
> > +		return -ENODEV;
> > +	}
> > +
> > +	mmc_init(mmc);
> > +
> > +	fitp = malloc(roundup(fdt_header_len, 512));
> > +	if (!fitp) {
> > +		printf("PPA: malloc failed for FIT header(size 0x%zx)\n",
> > +		       roundup(fdt_header_len, 512));
> > +		return -ENOMEM;
> > +	}
> > +
> > +	cnt = DIV_ROUND_UP(fdt_header_len, 512);
> > +	debug("%s: MMC read PPA FIT header: dev # %u, block # %u,
> count %u\n",
> > +	      __func__, dev, blk, cnt);
> > +	ret = mmc->block_dev.block_read(&mmc->block_dev, blk, cnt, fitp);
> > +	if (ret != cnt) {
> > +		free(fitp);
> > +		printf("MMC/SD read of PPA FIT header at offset 0x%x
> failed\n",
> > +		       CONFIG_SYS_LS_PPA_FW_ADDR);
> > +		return -EIO;
> > +	}
> > +
> > +	/* flush cache after read */
> > +	flush_cache((ulong)fitp, cnt * 512);
> > +
> > +	fw_length = fdt_totalsize(fitp);
> > +	free(fitp);
> > +
> > +	fw_length = roundup(fw_length, 512);
> > +	ppa_fit_addr = malloc(fw_length);
> > +	if (!ppa_fit_addr) {
> > +		printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
> > +		       fw_length);
> > +		return -ENOMEM;
> > +	}
> > +
> > +	cnt = DIV_ROUND_UP(fw_length, 512);
> > +	debug("%s: MMC read PPA FIT image: dev # %u, block # %u,
> count %u\n",
> > +	      __func__, dev, blk, cnt);
> > +	ret = mmc->block_dev.block_read(&mmc->block_dev,
> > +					blk, cnt, ppa_fit_addr);
> > +	if (ret != cnt) {
> > +		free(ppa_fit_addr);
> > +		printf("MMC/SD read of PPA FIT header at offset 0x%x
> failed\n",
> > +		       CONFIG_SYS_LS_PPA_FW_ADDR);
> > +		return -EIO;
> > +	}
> > +
> > +	flush_cache((ulong)ppa_fit_addr, cnt * 512);
> > +
> > +#elif CONFIG_SYS_LS_PPA_FW_IN_NAND
> > +	struct fdt_header fit;
> > +
> > +	debug("%s: PPA image load from NAND\n", __func__);
> > +
> > +	nand_init();
> > +	ret = nand_read(nand_info[0],
> (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
> > +		       &fdt_header_len, (u_char *)&fit);
> > +	if (ret == -EUCLEAN) {
> > +		printf("NAND read of PPA FIT header at offset 0x%x failed\n",
> > +		       CONFIG_SYS_LS_PPA_FW_ADDR);
> > +		return -EIO;
> > +	}
> > +
> > +	fw_length = fdt_totalsize(&fit);
> > +
> > +	ppa_fit_addr = malloc(fw_length);
> > +	if (!ppa_fit_addr) {
> > +		printf("PPA: malloc failed for PPA image(size 0x%zx)\n",
> > +		       fw_length);
> > +		return -ENOMEM;
> > +	}
> > +
> > +	ret = nand_read(nand_info[0],
> (loff_t)CONFIG_SYS_LS_PPA_FW_ADDR,
> > +		       &fw_length, (u_char *)ppa_fit_addr);
> > +	if (ret == -EUCLEAN) {
> > +		free(ppa_fit_addr);
> > +		printf("NAND read of PPA firmware at offset 0x%x failed\n",
> > +		       CONFIG_SYS_LS_PPA_FW_ADDR);
> > +		return -EIO;
> > +	}
> >  #else
> >  #error "No CONFIG_SYS_LS_PPA_FW_IN_xxx defined"
> >  #endif
> >
> 
> Why do you flush the cache after reading from SD but not from NAND?

Added the flush operation because I referred to the FMan ucode loading process.
It works well when loading from SD without the flush cache action, will remove the flush action.

Thanks,
Zhiqiang