[U-Boot] [PATCH v2 02/13] sunxi: Add initial support for R40

Mon Mar 6 08:05:07 UTC 2017

The R40 is the successor to the A20. It is a hybrid of the A20, A33
and the H3.

The R40's PIO controller is compatible with the A20,
Reuse the A20 UART and I2C muxing code by adding the R40's macro.

The display pipeline is the newer DE 2.0 variant.
Block enabling video on R40 for now.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/mach-sunxi/board.c    | 10 +++++++---
 arch/arm/mach-sunxi/cpu_info.c |  2 ++
 board/sunxi/Kconfig            |  7 +++++++
 board/sunxi/board.c            | 19 ++++++++++++++-----
 4 files changed, 30 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 5e03d039433a..5a74c9717d84 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -69,12 +69,14 @@ struct mm_region *mem_map = sunxi_mem_map;
 static int gpio_init(void)
 {
 #if CONFIG_CONS_INDEX == 1 && defined(CONFIG_UART0_PORT_F)
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
 	/* disable GPB22,23 as uart0 tx,rx to avoid conflict */
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUNXI_GPIO_INPUT);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUNXI_GPIO_INPUT);
 #endif
-#if defined(CONFIG_MACH_SUN8I)
+#if defined(CONFIG_MACH_SUN8I) && !defined(CONFIG_MACH_SUN8I_R40)
 	sunxi_gpio_set_cfgpin(SUNXI_GPF(2), SUN8I_GPF_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUN8I_GPF_UART0);
 #else
@@ -82,7 +84,9 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPF(4), SUNXI_GPF_UART0);
 #endif
 	sunxi_gpio_set_pull(SUNXI_GPF(4), 1);
-#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I))
+#elif CONFIG_CONS_INDEX == 1 && (defined(CONFIG_MACH_SUN4I) || \
+				 defined(CONFIG_MACH_SUN7I) || \
+				 defined(CONFIG_MACH_SUN8I_R40))
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(22), SUN4I_GPB_UART0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(23), SUN4I_GPB_UART0);
 	sunxi_gpio_set_pull(SUNXI_GPB(23), SUNXI_GPIO_PULL_UP);
diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c
index 85633ccec216..7851de299ab5 100644
--- a/arch/arm/mach-sunxi/cpu_info.c
+++ b/arch/arm/mach-sunxi/cpu_info.c
@@ -87,6 +87,8 @@ int print_cpuinfo(void)
 	printf("CPU:   Allwinner A83T (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN8I_H3
 	printf("CPU:   Allwinner H3 (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_R40
+	printf("CPU:   Allwinner R40 (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN9I
 	puts("CPU:   Allwinner A80 (SUN9I)\n");
 #elif defined CONFIG_MACH_SUN50I
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index ab22146c6e96..61b3dbe64167 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -132,6 +132,11 @@ config MACH_SUN8I_H3
 	select MACH_SUNXI_H3_H5
 	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
 
+config MACH_SUN8I_R40
+	bool "sun8i (Allwinner R40)"
+	select CPU_V7
+	select SUNXI_GEN_SUN6I
+
 config MACH_SUN9I
 	bool "sun9i (Allwinner A80)"
 	select CPU_V7
@@ -161,6 +166,7 @@ config MACH_SUN8I
 	default y if MACH_SUN8I_A33
 	default y if MACH_SUN8I_A83T
 	default y if MACH_SUNXI_H3_H5
+	default y if MACH_SUN8I_R40
 
 config RESERVE_ALLWINNER_BOOT0_HEADER
 	bool "reserve space for Allwinner boot0 header"
@@ -519,6 +525,7 @@ config VIDEO
 	bool "Enable graphical uboot console on HDMI, LCD or VGA"
 	depends on !MACH_SUN8I_A83T
 	depends on !MACH_SUNXI_H3_H5
+	depends on !MACH_SUN8I_R40
 	depends on !MACH_SUN9I
 	depends on !MACH_SUN50I
 	default y
diff --git a/board/sunxi/board.c b/board/sunxi/board.c
index b9660128e5e7..495cb591a9fb 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -394,7 +394,10 @@ int board_mmc_init(bd_t *bis)
 void i2c_init_board(void)
 {
 #ifdef CONFIG_I2C0_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN5I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN5I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(0), SUN4I_GPB_TWI0);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(1), SUN4I_GPB_TWI0);
 	clock_twi_onoff(0, 1);
@@ -410,7 +413,9 @@ void i2c_init_board(void)
 #endif
 
 #ifdef CONFIG_I2C1_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(18), SUN4I_GPB_TWI1);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(19), SUN4I_GPB_TWI1);
 	clock_twi_onoff(1, 1);
@@ -430,7 +435,9 @@ void i2c_init_board(void)
 #endif
 
 #ifdef CONFIG_I2C2_ENABLE
-#if defined(CONFIG_MACH_SUN4I) || defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN4I) || \
+    defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(20), SUN4I_GPB_TWI2);
 	sunxi_gpio_set_cfgpin(SUNXI_GPB(21), SUN4I_GPB_TWI2);
 	clock_twi_onoff(2, 1);
@@ -454,7 +461,8 @@ void i2c_init_board(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPG(10), SUN6I_GPG_TWI3);
 	sunxi_gpio_set_cfgpin(SUNXI_GPG(11), SUN6I_GPG_TWI3);
 	clock_twi_onoff(3, 1);
-#elif defined(CONFIG_MACH_SUN7I)
+#elif defined(CONFIG_MACH_SUN7I) || \
+      defined(CONFIG_MACH_SUN8I_R40)
 	sunxi_gpio_set_cfgpin(SUNXI_GPI(0), SUN7I_GPI_TWI3);
 	sunxi_gpio_set_cfgpin(SUNXI_GPI(1), SUN7I_GPI_TWI3);
 	clock_twi_onoff(3, 1);
@@ -462,7 +470,8 @@ void i2c_init_board(void)
 #endif
 
 #ifdef CONFIG_I2C4_ENABLE
-#if defined(CONFIG_MACH_SUN7I)
+#if defined(CONFIG_MACH_SUN7I) || \
+    defined(CONFIG_MACH_SUN8I_R40)
 	sunxi_gpio_set_cfgpin(SUNXI_GPI(2), SUN7I_GPI_TWI4);
 	sunxi_gpio_set_cfgpin(SUNXI_GPI(3), SUN7I_GPI_TWI4);
 	clock_twi_onoff(4, 1);
-- 
2.11.0

