[U-Boot] [PATCH v2 1/2] at91: video: Support driver-model for the HLCD driver
Songjun Wu
songjun.wu at microchip.com
Wed Mar 1 09:25:09 UTC 2017
Add driver-model support to this driver.
Signed-off-by: Songjun Wu <songjun.wu at microchip.com>
---
Changes in v2:
- Due to the peripheral clock driver improvement, remove
the unneccessary clock calling.
board/atmel/at91sam9n12ek/at91sam9n12ek.c | 2 +
board/atmel/at91sam9x5ek/at91sam9x5ek.c | 2 +
board/atmel/sama5d2_xplained/sama5d2_xplained.c | 2 +
board/atmel/sama5d3xek/sama5d3xek.c | 2 +
board/atmel/sama5d4_xplained/sama5d4_xplained.c | 2 +
board/atmel/sama5d4ek/sama5d4ek.c | 2 +
drivers/video/Kconfig | 9 +
drivers/video/atmel_hlcdfb.c | 314 +++++++++++++++++++++++-
include/configs/at91sam9n12ek.h | 4 +
include/configs/at91sam9x5ek.h | 4 +
include/configs/ma5d4evk.h | 4 +
include/configs/sama5d2_xplained.h | 4 +
include/configs/sama5d3xek.h | 4 +
include/configs/sama5d4_xplained.h | 4 +
include/configs/sama5d4ek.h | 4 +
15 files changed, 360 insertions(+), 3 deletions(-)
diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
index fc4f50d219..e70a929299 100644
--- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c
+++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c
@@ -79,6 +79,7 @@ static void at91sam9n12ek_nand_hw_init(void)
#endif
#ifdef CONFIG_LCD
+#ifndef CONFIG_DM_VIDEO
vidinfo_t panel_info = {
.vl_col = 480,
.vl_row = 272,
@@ -104,6 +105,7 @@ void lcd_disable(void)
{
at91_set_pio_output(AT91_PIO_PORTC, 25, 1); /* power down */
}
+#endif
#ifdef CONFIG_LCD_INFO
void lcd_show_board_info(void)
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index b0d440d728..8504d604fa 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -108,6 +108,7 @@ int board_eth_init(bd_t *bis)
}
#ifdef CONFIG_LCD
+#ifndef CONFIG_DM_VIDEO
vidinfo_t panel_info = {
.vl_col = 800,
.vl_row = 480,
@@ -136,6 +137,7 @@ void lcd_disable(void)
if (has_lcdc())
at91_set_a_periph(AT91_PIO_PORTC, 29, 0); /* power down */
}
+#endif
static void at91sam9x5ek_lcd_hw_init(void)
{
diff --git a/board/atmel/sama5d2_xplained/sama5d2_xplained.c b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
index c5337af4de..6e8851aaf6 100644
--- a/board/atmel/sama5d2_xplained/sama5d2_xplained.c
+++ b/board/atmel/sama5d2_xplained/sama5d2_xplained.c
@@ -34,6 +34,7 @@ static void board_usb_hw_init(void)
}
#ifdef CONFIG_LCD
+#ifndef CONFIG_DM_VIDEO
vidinfo_t panel_info = {
.vl_col = 480,
.vl_row = 272,
@@ -57,6 +58,7 @@ unsigned int has_lcdc(void)
{
return 1;
}
+#endif
static void board_lcd_hw_init(void)
{
diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c
index ce67478f0b..a83e96575f 100644
--- a/board/atmel/sama5d3xek/sama5d3xek.c
+++ b/board/atmel/sama5d3xek/sama5d3xek.c
@@ -142,6 +142,7 @@ static void sama5d3xek_mci_hw_init(void)
#endif
#ifdef CONFIG_LCD
+#ifndef CONFIG_DM_VIDEO
vidinfo_t panel_info = {
.vl_col = 800,
.vl_row = 480,
@@ -164,6 +165,7 @@ void lcd_enable(void)
void lcd_disable(void)
{
}
+#endif
static void sama5d3xek_lcd_hw_init(void)
{
diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
index 23ec274468..6512429ba7 100644
--- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c
+++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c
@@ -108,6 +108,7 @@ static void sama5d4_xplained_usb_hw_init(void)
#endif
#ifdef CONFIG_LCD
+#ifndef CONFIG_DM_VIDEO
vidinfo_t panel_info = {
.vl_col = 480,
.vl_row = 272,
@@ -131,6 +132,7 @@ unsigned int has_lcdc(void)
{
return 1;
}
+#endif
static void sama5d4_xplained_lcd_hw_init(void)
{
diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c
index 72bad23087..82b8590102 100644
--- a/board/atmel/sama5d4ek/sama5d4ek.c
+++ b/board/atmel/sama5d4ek/sama5d4ek.c
@@ -109,6 +109,7 @@ static void sama5d4ek_usb_hw_init(void)
#endif
#ifdef CONFIG_LCD
+#ifndef CONFIG_DM_VIDEO
vidinfo_t panel_info = {
.vl_col = 800,
.vl_row = 480,
@@ -132,6 +133,7 @@ unsigned int has_lcdc(void)
{
return 1;
}
+#endif
static void sama5d4ek_lcd_hw_init(void)
{
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2069576958..44756ea18e 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -371,6 +371,15 @@ config DISPLAY
The devices provide a simple interface to start up the display,
read display information and enable it.
+config ATMEL_HLCD
+ bool "Enable ATMEL video support using HLCDC"
+ depends on DM_VIDEO
+ help
+ HLCDC supports video output to an attached LCD panel as well as
+ other options such as HDMI. At present only LCD is supported by
+ U-Boot. This option enables this support which can be used on
+ devices which have an LCD display connected.
+
config VIDEO_BROADWELL_IGD
bool "Enable Intel Broadwell integrated graphics device"
depends on X86
diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c
index 960b474b76..0bcb92b2cf 100644
--- a/drivers/video/atmel_hlcdfb.c
+++ b/drivers/video/atmel_hlcdfb.c
@@ -10,13 +10,24 @@
#include <asm/io.h>
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
+#include <clk.h>
+#include <dm.h>
+#include <fdtdec.h>
#include <lcd.h>
+#include <video.h>
#include <atmel_hlcdc.h>
#if defined(CONFIG_LCD_LOGO)
#include <bmp_logo.h>
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
+#define lcdc_readl(reg) __raw_readl((reg))
+#define lcdc_writel(reg, val) __raw_writel((val), (reg))
+
+#ifndef CONFIG_DM_VIDEO
+
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
#define ATMEL_LCDC_DMA_BURST_LEN 8
@@ -26,9 +37,6 @@
#define ATMEL_LCDC_FIFO_SIZE 512
-#define lcdc_readl(reg) __raw_readl((reg))
-#define lcdc_writel(reg, val) __raw_writel((val), (reg))
-
/*
* the CLUT register map as following
* RCLUT(24 ~ 16), GCLUT(15 ~ 8), BCLUT(7 ~ 0)
@@ -218,3 +226,303 @@ void lcd_ctrl_init(void *lcdbase)
/* Enable flushing if we enabled dcache */
lcd_set_flush_dcache(1);
}
+
+#else
+
+enum {
+ LCD_MAX_WIDTH = 1024,
+ LCD_MAX_HEIGHT = 768,
+ LCD_MAX_LOG2_BPP = VIDEO_BPP16,
+};
+
+struct atmel_hlcdc_priv {
+ struct atmel_hlcd_regs *regs;
+ struct display_timing timing;
+ unsigned int vl_bpix;
+ unsigned int guard_time;
+ ulong clk_rate;
+};
+
+static int at91_hlcdc_enable_clk(struct udevice *dev)
+{
+ struct atmel_hlcdc_priv *priv = dev_get_priv(dev);
+ struct clk clk;
+ ulong clk_rate;
+ int ret;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret)
+ return -EINVAL;
+
+ ret = clk_enable(&clk);
+ if (ret)
+ return ret;
+
+ clk_rate = clk_get_rate(&clk);
+ if (!clk_rate)
+ return -ENODEV;
+
+ priv->clk_rate = clk_rate;
+
+ clk_free(&clk);
+
+ return 0;
+}
+
+static void atmel_hlcdc_init(struct udevice *dev)
+{
+ struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
+ struct atmel_hlcdc_priv *priv = dev_get_priv(dev);
+ struct atmel_hlcd_regs *regs = priv->regs;
+ struct display_timing *timing = &priv->timing;
+ struct lcd_dma_desc *desc;
+ unsigned long value, vl_clk_pol;
+
+ /* Disable DISP signal */
+ lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_DISPDIS);
+ while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
+ udelay(1);
+ /* Disable synchronization */
+ lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_SYNCDIS);
+ while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
+ udelay(1);
+ /* Disable pixel clock */
+ lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_CLKDIS);
+ while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
+ udelay(1);
+ /* Disable PWM */
+ lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_PWMDIS);
+ while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
+ udelay(1);
+
+ /* Set pixel clock */
+ value = priv->clk_rate / timing->pixelclock.typ;
+ if (priv->clk_rate % timing->pixelclock.typ)
+ value++;
+
+ vl_clk_pol = 0;
+ if (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+ vl_clk_pol = LCDC_LCDCFG0_CLKPOL;
+
+ if (value < 1) {
+ /* Using system clock as pixel clock */
+ lcdc_writel(®s->lcdc_lcdcfg0,
+ LCDC_LCDCFG0_CLKDIV(0)
+ | LCDC_LCDCFG0_CGDISHCR
+ | LCDC_LCDCFG0_CGDISHEO
+ | LCDC_LCDCFG0_CGDISOVR1
+ | LCDC_LCDCFG0_CGDISBASE
+ | vl_clk_pol
+ | LCDC_LCDCFG0_CLKSEL);
+
+ } else {
+ lcdc_writel(®s->lcdc_lcdcfg0,
+ LCDC_LCDCFG0_CLKDIV(value - 2)
+ | LCDC_LCDCFG0_CGDISHCR
+ | LCDC_LCDCFG0_CGDISHEO
+ | LCDC_LCDCFG0_CGDISOVR1
+ | LCDC_LCDCFG0_CGDISBASE
+ | vl_clk_pol);
+ }
+
+ /* Initialize control register 5 */
+ value = 0;
+
+ if (!(timing->flags & DISPLAY_FLAGS_HSYNC_HIGH))
+ value |= LCDC_LCDCFG5_HSPOL;
+ if (!(timing->flags & DISPLAY_FLAGS_VSYNC_HIGH))
+ value |= LCDC_LCDCFG5_VSPOL;
+
+#ifndef LCD_OUTPUT_BPP
+ /* Output is 24bpp */
+ value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
+#else
+ switch (LCD_OUTPUT_BPP) {
+ case 12:
+ value |= LCDC_LCDCFG5_MODE_OUTPUT_12BPP;
+ break;
+ case 16:
+ value |= LCDC_LCDCFG5_MODE_OUTPUT_16BPP;
+ break;
+ case 18:
+ value |= LCDC_LCDCFG5_MODE_OUTPUT_18BPP;
+ break;
+ case 24:
+ value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP;
+ break;
+ default:
+ BUG();
+ break;
+ }
+#endif
+
+ value |= LCDC_LCDCFG5_GUARDTIME(priv->guard_time);
+ value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS);
+ lcdc_writel(®s->lcdc_lcdcfg5, value);
+
+ /* Vertical & Horizontal Timing */
+ value = LCDC_LCDCFG1_VSPW(timing->vsync_len.typ - 1);
+ value |= LCDC_LCDCFG1_HSPW(timing->hsync_len.typ - 1);
+ lcdc_writel(®s->lcdc_lcdcfg1, value);
+
+ value = LCDC_LCDCFG2_VBPW(timing->vback_porch.typ);
+ value |= LCDC_LCDCFG2_VFPW(timing->vfront_porch.typ - 1);
+ lcdc_writel(®s->lcdc_lcdcfg2, value);
+
+ value = LCDC_LCDCFG3_HBPW(timing->hback_porch.typ - 1);
+ value |= LCDC_LCDCFG3_HFPW(timing->hfront_porch.typ - 1);
+ lcdc_writel(®s->lcdc_lcdcfg3, value);
+
+ /* Display size */
+ value = LCDC_LCDCFG4_RPF(timing->vactive.typ - 1);
+ value |= LCDC_LCDCFG4_PPL(timing->hactive.typ - 1);
+ lcdc_writel(®s->lcdc_lcdcfg4, value);
+
+ lcdc_writel(®s->lcdc_basecfg0,
+ LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO);
+
+ switch (VNBITS(priv->vl_bpix)) {
+ case 16:
+ lcdc_writel(®s->lcdc_basecfg1,
+ LCDC_BASECFG1_RGBMODE_16BPP_RGB_565);
+ break;
+ case 32:
+ lcdc_writel(®s->lcdc_basecfg1,
+ LCDC_BASECFG1_RGBMODE_24BPP_RGB_888);
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ lcdc_writel(®s->lcdc_basecfg2, LCDC_BASECFG2_XSTRIDE(0));
+ lcdc_writel(®s->lcdc_basecfg3, 0);
+ lcdc_writel(®s->lcdc_basecfg4, LCDC_BASECFG4_DMA);
+
+ /* Disable all interrupts */
+ lcdc_writel(®s->lcdc_lcdidr, ~0UL);
+ lcdc_writel(®s->lcdc_baseidr, ~0UL);
+
+ /* Setup the DMA descriptor, this descriptor will loop to itself */
+ desc = (struct lcd_dma_desc *)(uc_plat->base - 16);
+
+ desc->address = (u32)uc_plat->base;
+
+ /* Disable DMA transfer interrupt & descriptor loaded interrupt. */
+ desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN
+ | LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH;
+ desc->next = (u32)desc;
+
+ /* Flush the DMA descriptor if we enabled dcache */
+ flush_dcache_range((u32)desc, (u32)desc + sizeof(*desc));
+
+ lcdc_writel(®s->lcdc_baseaddr, desc->address);
+ lcdc_writel(®s->lcdc_basectrl, desc->control);
+ lcdc_writel(®s->lcdc_basenext, desc->next);
+ lcdc_writel(®s->lcdc_basecher,
+ LCDC_BASECHER_CHEN | LCDC_BASECHER_UPDATEEN);
+
+ /* Enable LCD */
+ value = lcdc_readl(®s->lcdc_lcden);
+ lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_CLKEN);
+ while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS))
+ udelay(1);
+ value = lcdc_readl(®s->lcdc_lcden);
+ lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_SYNCEN);
+ while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS))
+ udelay(1);
+ value = lcdc_readl(®s->lcdc_lcden);
+ lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_DISPEN);
+ while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS))
+ udelay(1);
+ value = lcdc_readl(®s->lcdc_lcden);
+ lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_PWMEN);
+ while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS))
+ udelay(1);
+}
+
+static int atmel_hlcdc_probe(struct udevice *dev)
+{
+ struct video_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct atmel_hlcdc_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = at91_hlcdc_enable_clk(dev);
+ if (ret)
+ return ret;
+
+ atmel_hlcdc_init(dev);
+
+ uc_priv->xsize = priv->timing.hactive.typ;
+ uc_priv->ysize = priv->timing.vactive.typ;
+ uc_priv->bpix = priv->vl_bpix;
+
+ /* Enable flushing if we enabled dcache */
+ video_set_flush_dcache(dev, true);
+
+ return 0;
+}
+
+static int atmel_hlcdc_ofdata_to_platdata(struct udevice *dev)
+{
+ struct atmel_hlcdc_priv *priv = dev_get_priv(dev);
+ const void *blob = gd->fdt_blob;
+ int node = dev->of_offset;
+
+ priv->regs = (struct atmel_hlcd_regs *)dev_get_addr(dev);
+ if (!priv->regs) {
+ debug("%s: No display controller address\n", __func__);
+ return -EINVAL;
+ }
+
+ if (fdtdec_decode_display_timing(blob, dev->of_offset,
+ 0, &priv->timing)) {
+ debug("%s: Failed to decode display timing\n", __func__);
+ return -EINVAL;
+ }
+
+ if (priv->timing.hactive.typ > LCD_MAX_WIDTH)
+ priv->timing.hactive.typ = LCD_MAX_WIDTH;
+
+ if (priv->timing.vactive.typ > LCD_MAX_HEIGHT)
+ priv->timing.vactive.typ = LCD_MAX_HEIGHT;
+
+ priv->vl_bpix = fdtdec_get_int(blob, node, "atmel,vl-bpix", 0);
+ if (!priv->vl_bpix) {
+ debug("%s: Failed to get bits per pixel\n", __func__);
+ return -EINVAL;
+ }
+
+ priv->guard_time = fdtdec_get_int(blob, node, "atmel,guard-time", 1);
+
+ return 0;
+}
+
+static int atmel_hlcdc_bind(struct udevice *dev)
+{
+ struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev);
+
+ uc_plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT *
+ (1 << LCD_MAX_LOG2_BPP) / 8;
+
+ debug("%s: Frame buffer size %x\n", __func__, uc_plat->size);
+
+ return 0;
+}
+
+static const struct udevice_id atmel_hlcdc_ids[] = {
+ { .compatible = "atmel,sama5d2-hlcdc" },
+ { }
+};
+
+U_BOOT_DRIVER(atmel_hlcdfb) = {
+ .name = "atmel_hlcdfb",
+ .id = UCLASS_VIDEO,
+ .of_match = atmel_hlcdc_ids,
+ .bind = atmel_hlcdc_bind,
+ .probe = atmel_hlcdc_probe,
+ .ofdata_to_platdata = atmel_hlcdc_ofdata_to_platdata,
+ .priv_auto_alloc_size = sizeof(struct atmel_hlcdc_priv),
+};
+
+#endif
diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h
index 339f53f558..596d00bb20 100644
--- a/include/configs/at91sam9n12ek.h
+++ b/include/configs/at91sam9n12ek.h
@@ -44,7 +44,11 @@
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
+
+#ifndef CONFIG_DM_VIDEO
#define CONFIG_ATMEL_HLCD
+#endif
+
#define CONFIG_ATMEL_LCD_RGB565
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index 730b9807db..c0e87c7190 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -40,7 +40,11 @@
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
+
+#ifndef CONFIG_DM_VIDEO
#define CONFIG_ATMEL_HLCD
+#endif
+
#define CONFIG_ATMEL_LCD_RGB565
diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h
index a5db11ce12..62ad187c8b 100644
--- a/include/configs/ma5d4evk.h
+++ b/include/configs/ma5d4evk.h
@@ -77,9 +77,13 @@
#define CONFIG_BMP_32BPP
#define LCD_BPP LCD_COLOR16
#define LCD_OUTPUT_BPP 24
+
+#ifndef CONFIG_DM_VIDEO
#define CONFIG_ATMEL_HLCD
#endif
+#endif
+
/*
* SD/MMC
*/
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index ccbcc765c3..c504cc7aae 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -62,7 +62,11 @@
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
+
+#ifndef CONFIG_DM_VIDEO
#define CONFIG_ATMEL_HLCD
+#endif
+
#define CONFIG_ATMEL_LCD_RGB565
#endif
diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h
index 13790e7244..04ea23c461 100644
--- a/include/configs/sama5d3xek.h
+++ b/include/configs/sama5d3xek.h
@@ -40,7 +40,11 @@
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
+
+#ifndef CONFIG_DM_VIDEO
#define CONFIG_ATMEL_HLCD
+#endif
+
#define CONFIG_ATMEL_LCD_RGB565
/* board specific (not enough SRAM) */
diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h
index 55f10ad1f0..30f07f5331 100644
--- a/include/configs/sama5d4_xplained.h
+++ b/include/configs/sama5d4_xplained.h
@@ -92,7 +92,11 @@
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
+
+#ifndef CONFIG_DM_VIDEO
#define CONFIG_ATMEL_HLCD
+#endif
+
#define CONFIG_ATMEL_LCD_RGB565
#endif
diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h
index 680d5918d7..4d537b22aa 100644
--- a/include/configs/sama5d4ek.h
+++ b/include/configs/sama5d4ek.h
@@ -91,7 +91,11 @@
#define CONFIG_LCD_INFO
#define CONFIG_LCD_INFO_BELOW_LOGO
#define CONFIG_SYS_WHITE_ON_BLACK
+
+#ifndef CONFIG_DM_VIDEO
#define CONFIG_ATMEL_HLCD
+#endif
+
#define CONFIG_ATMEL_LCD_RGB565
#ifdef CONFIG_SYS_USE_SERIALFLASH
--
2.11.0
More information about the U-Boot
mailing list