[U-Boot] [PATCH] rockchip: set scan_dev_for_boot_part env for rockchip SoC

Eddie Cai eddie.cai.linux at gmail.com
Wed Mar 8 01:30:58 UTC 2017


Hi Simon

2017-03-06 14:46 GMT+08:00 Eddie Cai <eddie.cai.linux at gmail.com>:

> Hi Simon
>
> 2017-02-23 11:33 GMT+08:00 Simon Glass <sjg at chromium.org>:
>
>> Hi Eddie,
>>
>> On 22 February 2017 at 07:12, Eddie Cai <eddie.cai.linux at gmail.com>
>> wrote:
>> > Hi Simon
>> >
>> > 2017-02-22 17:05 GMT+08:00 Eddie Cai <eddie.cai.linux at gmail.com>:
>> >>
>> >> Hi Simon
>> >>
>> >> 2017-02-22 11:59 GMT+08:00 Simon Glass <sjg at chromium.org>:
>> >>>
>> >>> Hi Eddie,
>> >>>
>> >>> On 17 February 2017 at 00:57, Eddie Cai <eddie.cai.linux at gmail.com>
>> >>> wrote:
>> >>> > Auto write GPT table if fail to get GPT table when
>> >>> > scan_dev_for_boot_part
>> >>> >
>> >>> > Signed-off-by: Eddie Cai <eddie.cai.linux at gmail.com>
>> >>> > ---
>> >>> >  arch/arm/mach-rockchip/rk3036-board.c | 20 ++++++++++++++-
>> >>> >  arch/arm/mach-rockchip/rk3288-board.c | 20 ++++++++++++++-
>> >>> >  arch/arm/mach-rockchip/rk3399-board.c | 46
>> >>> > +++++++++++++++++++++++++++++++++++
>> >>> >  3 files changed, 84 insertions(+), 2 deletions(-)
>> >>> >  create mode 100644 arch/arm/mach-rockchip/rk3399-board.c
>> >>> >
>> >>> > diff --git a/arch/arm/mach-rockchip/rk3036-board.c
>> >>> > b/arch/arm/mach-rockchip/rk3036-board.c
>> >>> > index bf2b268..e9aeaff 100644
>> >>> > --- a/arch/arm/mach-rockchip/rk3036-board.c
>> >>> > +++ b/arch/arm/mach-rockchip/rk3036-board.c
>> >>> > @@ -51,7 +51,25 @@ __weak int rk_board_late_init(void)
>> >>> >  int board_late_init(void)
>> >>> >  {
>> >>> >         setup_boot_mode();
>> >>> > -
>> >>> > +       setenv("scan_dev_for_boot_part",
>> >>> > +                       "part list ${devtype} ${devnum} -bootable
>> test;
>> >>> > "
>> >>> > +                       "if env exists test; then "
>> >>> > +                              "echo Found valid partition table; "
>> >>> > +                       "else "
>> >>> > +                      "echo No valid partition table, write the
>> >>> > original partition table; "
>> >>> > +                              "gpt write ${devtype} ${devnum}
>> >>> > ${partitions}; "
>> >>> > +                              "mmc rescan;"
>> >>> > +                       "fi;"
>> >>> > +                       "part list ${devtype} ${devnum} -bootable
>> >>> > devplist; "
>> >>> > +                       "env exists devplist || setenv devplist 1; "
>> >>> > +                       "for distro_bootpart in ${devplist}; do "
>> >>> > +                           "if fstype ${devtype} "
>> >>> > +                                   "${devnum}:${distro_bootpart} "
>> >>> > +                                   "bootfstype; then "
>> >>> > +                               "run scan_dev_for_boot; "
>> >>> > +                             "fi; "
>> >>> > +                       "done\0"
>> >>> > +       );
>> >>> >         return rk_board_late_init();
>> >>> >  }
>> >>> >
>> >>> > diff --git a/arch/arm/mach-rockchip/rk3288-board.c
>> >>> > b/arch/arm/mach-rockchip/rk3288-board.c
>> >>> > index 9894a25..386b155 100644
>> >>> > --- a/arch/arm/mach-rockchip/rk3288-board.c
>> >>> > +++ b/arch/arm/mach-rockchip/rk3288-board.c
>> >>> > @@ -74,7 +74,25 @@ int board_late_init(void)
>> >>> >  {
>> >>> >         setup_boot_mode();
>> >>> >         rk3288_qos_init();
>> >>> > -
>> >>> > +       setenv("scan_dev_for_boot_part",
>> >>> > +                       "part list ${devtype} ${devnum} -bootable
>> test;
>> >>> > "
>> >>> > +                       "if env exists test; then "
>> >>> > +                              "echo Found valid partition table; "
>> >>> > +                       "else "
>> >>> > +                      "echo No valid partition table, write the
>> >>> > original partition table; "
>> >>> > +                              "gpt write ${devtype} ${devnum}
>> >>> > ${partitions}; "
>> >>> > +                              "mmc rescan;"
>> >>> > +                       "fi;"
>> >>> > +                       "part list ${devtype} ${devnum} -bootable
>> >>> > devplist; "
>> >>> > +                       "env exists devplist || setenv devplist 1; "
>> >>> > +                       "for distro_bootpart in ${devplist}; do "
>> >>> > +                           "if fstype ${devtype} "
>> >>> > +                                   "${devnum}:${distro_bootpart} "
>> >>> > +                                   "bootfstype; then "
>> >>> > +                               "run scan_dev_for_boot; "
>> >>> > +                             "fi; "
>> >>> > +                       "done\0"
>> >>> > +       );
>> >>> >         return rk_board_late_init();
>> >>> >  }
>> >>> >
>> >>> > diff --git a/arch/arm/mach-rockchip/rk3399-board.c
>> >>> > b/arch/arm/mach-rockchip/rk3399-board.c
>> >>> > new file mode 100644
>> >>> > index 0000000..3777643
>> >>> > --- /dev/null
>> >>> > +++ b/arch/arm/mach-rockchip/rk3399-board.c
>> >>> > @@ -0,0 +1,46 @@
>> >>> > +/*
>> >>> > + * (C) Copyright 2017 ockchip Electronics Co., Ltd
>> >>> > + *
>> >>> > + * SPDX-License-Identifier:     GPL-2.0+
>> >>> > + */
>> >>> > +
>> >>> > +#include <common.h>
>> >>> > +#include <clk.h>
>> >>> > +#include <dm.h>
>> >>> > +#include <ram.h>
>> >>> > +#include <syscon.h>
>> >>> > +#include <asm/io.h>
>> >>> > +#include <asm/arch/clock.h>
>> >>> > +#include <asm/arch/periph.h>
>> >>> > +
>> >>> > +DECLARE_GLOBAL_DATA_PTR;
>> >>> > +
>> >>> > +__weak int rk_board_late_init(void)
>> >>> > +{
>> >>> > +       return 0;
>> >>> > +}
>> >>> > +
>> >>> > +int board_late_init(void)
>> >>> > +{
>> >>> > +       setenv("scan_dev_for_boot_part",
>> >>> > +                       "part list ${devtype} ${devnum} -bootable
>> test;
>> >>> > "
>> >>> > +                       "if env exists test; then "
>> >>> > +                              "echo Found valid partition table; "
>> >>> > +                       "else "
>> >>> > +                      "echo No valid partition table, write the
>> >>> > original partition table; "
>> >>> > +                              "gpt write ${devtype} ${devnum}
>> >>> > ${partitions}; "
>> >>> > +                              "mmc rescan;"
>> >>> > +                       "fi;"
>> >>> > +                       "part list ${devtype} ${devnum} -bootable
>> >>> > devplist; "
>> >>> > +                       "env exists devplist || setenv devplist 1; "
>> >>> > +                       "for distro_bootpart in ${devplist}; do "
>> >>> > +                           "if fstype ${devtype} "
>> >>> > +                                   "${devnum}:${distro_bootpart} "
>> >>> > +                                   "bootfstype; then "
>> >>> > +                               "run scan_dev_for_boot; "
>> >>> > +                             "fi; "
>> >>> > +                       "done\0"
>> >>>
>> >>> What is the purpose of this setenv()?
>> >>
>> >> Auto write GPT table when scan_dev_for_boot_part fail to find a valid
>> one
>> >
>> > To be more clearly. If the GPT table in the boot media corrupted. Or
>> there
>> > is no GPT table in the boot media.  The original scan_dev_for_boot_part
>> will
>> > fail to find a  bootable partition. I just let it write GPT table when
>> can
>> > not find a valid one.
>> >>>
>>
>> OK, but you should not be changing the environment in your code. Can
>> you add your changes to the default environment (and put them in a
>> common file so that we don't have to repeat the same thing in each
>> file)?
>>
> done
>
Look like Tom don't like put this changes to default environment. See [0].
I think I would have to limit this change on Rockchip SoC because i can
only guarantee GPT table exist on Rockchip SoC. What do you think?
[0]: https://patchwork.ozlabs.org/patch/735557/

>
>> Regards,
>> Simon
>>
>
>


More information about the U-Boot mailing list