[U-Boot] [PATCH v5] usb: dwc2: add support for external vbus supply

[Marek Vasut]

On 03/10/2017 05:05 AM, Kever Yang wrote:
> Some board do not use the dwc2 internal VBUS_DRV signal, but
> use a gpio pin to enable the 5.0V VBUS power, add interface to
> enable the power in dwc2 driver.
> 
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> Signed-off-by: Simon Glass <sjg at chromium.org>

Applied, thanks.

-- 
Best regards,
Marek Vasut