[U-Boot] [PATCH 2/3] SPARC: Remove

Tom Rini trini at konsulko.com
Tue Mar 14 15:08:11 UTC 2017


The SPARC architecture is currently unmaintained, remove.

Cc: Francois Retief <fgretief at spaceteq.co.za>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
 Kconfig                                 |    2 +-
 MAINTAINERS                             |    6 -
 README                                  |    1 -
 arch/Kconfig                            |    5 -
 arch/sparc/Kconfig                      |   70 --
 arch/sparc/Makefile                     |    8 -
 arch/sparc/config.mk                    |   25 -
 arch/sparc/cpu/leon2/Makefile           |    9 -
 arch/sparc/cpu/leon2/cpu.c              |   60 --
 arch/sparc/cpu/leon2/cpu_init.c         |   95 ---
 arch/sparc/cpu/leon2/interrupts.c       |  187 -----
 arch/sparc/cpu/leon2/prom.c             | 1032 --------------------------
 arch/sparc/cpu/leon2/serial.c           |  147 ----
 arch/sparc/cpu/leon2/start.S            |  695 ------------------
 arch/sparc/cpu/leon3/Makefile           |   10 -
 arch/sparc/cpu/leon3/ambapp.c           |  316 --------
 arch/sparc/cpu/leon3/ambapp_low.S       |  784 --------------------
 arch/sparc/cpu/leon3/ambapp_low_c.S     |  113 ---
 arch/sparc/cpu/leon3/cpu.c              |  113 ---
 arch/sparc/cpu/leon3/cpu_init.c         |  175 -----
 arch/sparc/cpu/leon3/interrupts.c       |  193 -----
 arch/sparc/cpu/leon3/memcfg.c           |  237 ------
 arch/sparc/cpu/leon3/memcfg.h           |   90 ---
 arch/sparc/cpu/leon3/memcfg_low.S       |  253 -------
 arch/sparc/cpu/leon3/prom.c             | 1067 ---------------------------
 arch/sparc/cpu/leon3/serial.c           |  189 -----
 arch/sparc/cpu/leon3/start.S            |  681 ------------------
 arch/sparc/cpu/leon3/usb_uhci.c         | 1195 -------------------------------
 arch/sparc/cpu/leon3/usb_uhci.h         |  167 -----
 arch/sparc/cpu/u-boot.lds               |  142 ----
 arch/sparc/include/asm/arch-leon2/asi.h |   19 -
 arch/sparc/include/asm/arch-leon3/asi.h |   19 -
 arch/sparc/include/asm/asi.h            |   15 -
 arch/sparc/include/asm/asmmacro.h       |   28 -
 arch/sparc/include/asm/atomic.h         |   12 -
 arch/sparc/include/asm/bitops.h         |   17 -
 arch/sparc/include/asm/byteorder.h      |   21 -
 arch/sparc/include/asm/cache.h          |   23 -
 arch/sparc/include/asm/config.h         |   21 -
 arch/sparc/include/asm/global_data.h    |   30 -
 arch/sparc/include/asm/io.h             |   96 ---
 arch/sparc/include/asm/irq.h            |   38 -
 arch/sparc/include/asm/leon.h           |   28 -
 arch/sparc/include/asm/leon2.h          |  222 ------
 arch/sparc/include/asm/leon3.h          |   35 -
 arch/sparc/include/asm/linkage.h        |    0
 arch/sparc/include/asm/machines.h       |   78 --
 arch/sparc/include/asm/page.h           |   28 -
 arch/sparc/include/asm/posix_types.h    |  125 ----
 arch/sparc/include/asm/processor.h      |  102 ---
 arch/sparc/include/asm/prom.h           |  283 --------
 arch/sparc/include/asm/psr.h            |   83 ---
 arch/sparc/include/asm/ptrace.h         |  167 -----
 arch/sparc/include/asm/sections.h       |   11 -
 arch/sparc/include/asm/srmmu.h          |  287 --------
 arch/sparc/include/asm/stack.h          |  148 ----
 arch/sparc/include/asm/string.h         |   41 --
 arch/sparc/include/asm/types.h          |   60 --
 arch/sparc/include/asm/u-boot.h         |   24 -
 arch/sparc/include/asm/unaligned.h      |   10 -
 arch/sparc/include/asm/winmacro.h       |  138 ----
 arch/sparc/lib/Makefile                 |    9 -
 arch/sparc/lib/bootm.c                  |  166 -----
 arch/sparc/lib/cache.c                  |   17 -
 arch/sparc/lib/interrupts.c             |   68 --
 cmd/Kconfig                             |   14 -
 cmd/Makefile                            |    1 -
 cmd/ambapp.c                            |  575 ---------------
 cmd/bdinfo.c                            |   32 -
 common/Kconfig                          |    2 +-
 common/board_f.c                        |   20 +-
 common/board_r.c                        |   31 +-
 configs/gr_cpci_ax2000_defconfig        |    9 -
 configs/gr_ep2s60_defconfig             |    9 -
 configs/gr_xc3s_1500_defconfig          |    9 -
 configs/grsim_defconfig                 |   22 -
 configs/grsim_leon2_defconfig           |   17 -
 disk/Kconfig                            |    5 +-
 drivers/net/Makefile                    |    1 -
 drivers/net/greth.c                     |  677 -----------------
 drivers/net/greth.h                     |   81 ---
 examples/standalone/stubs.c             |   15 -
 include/ambapp.h                        |  225 ------
 include/ambapp_ids.h                    |  250 -------
 include/configs/gr_cpci_ax2000.h        |  340 ---------
 include/configs/gr_ep2s60.h             |  305 --------
 include/configs/gr_xc3s_1500.h          |  272 -------
 include/configs/grsim.h                 |  314 --------
 include/configs/grsim_leon2.h           |  284 --------
 include/grlib/apbuart.h                 |   47 --
 include/grlib/gptimer.h                 |   34 -
 include/grlib/greth.h                   |   87 ---
 include/grlib/irqmp.h                   |   23 -
 include/netdev.h                        |    1 -
 94 files changed, 6 insertions(+), 14232 deletions(-)
 delete mode 100644 arch/sparc/Kconfig
 delete mode 100644 arch/sparc/Makefile
 delete mode 100644 arch/sparc/config.mk
 delete mode 100644 arch/sparc/cpu/leon2/Makefile
 delete mode 100644 arch/sparc/cpu/leon2/cpu.c
 delete mode 100644 arch/sparc/cpu/leon2/cpu_init.c
 delete mode 100644 arch/sparc/cpu/leon2/interrupts.c
 delete mode 100644 arch/sparc/cpu/leon2/prom.c
 delete mode 100644 arch/sparc/cpu/leon2/serial.c
 delete mode 100644 arch/sparc/cpu/leon2/start.S
 delete mode 100644 arch/sparc/cpu/leon3/Makefile
 delete mode 100644 arch/sparc/cpu/leon3/ambapp.c
 delete mode 100644 arch/sparc/cpu/leon3/ambapp_low.S
 delete mode 100644 arch/sparc/cpu/leon3/ambapp_low_c.S
 delete mode 100644 arch/sparc/cpu/leon3/cpu.c
 delete mode 100644 arch/sparc/cpu/leon3/cpu_init.c
 delete mode 100644 arch/sparc/cpu/leon3/interrupts.c
 delete mode 100644 arch/sparc/cpu/leon3/memcfg.c
 delete mode 100644 arch/sparc/cpu/leon3/memcfg.h
 delete mode 100644 arch/sparc/cpu/leon3/memcfg_low.S
 delete mode 100644 arch/sparc/cpu/leon3/prom.c
 delete mode 100644 arch/sparc/cpu/leon3/serial.c
 delete mode 100644 arch/sparc/cpu/leon3/start.S
 delete mode 100644 arch/sparc/cpu/leon3/usb_uhci.c
 delete mode 100644 arch/sparc/cpu/leon3/usb_uhci.h
 delete mode 100644 arch/sparc/cpu/u-boot.lds
 delete mode 100644 arch/sparc/include/asm/arch-leon2/asi.h
 delete mode 100644 arch/sparc/include/asm/arch-leon3/asi.h
 delete mode 100644 arch/sparc/include/asm/asi.h
 delete mode 100644 arch/sparc/include/asm/asmmacro.h
 delete mode 100644 arch/sparc/include/asm/atomic.h
 delete mode 100644 arch/sparc/include/asm/bitops.h
 delete mode 100644 arch/sparc/include/asm/byteorder.h
 delete mode 100644 arch/sparc/include/asm/cache.h
 delete mode 100644 arch/sparc/include/asm/config.h
 delete mode 100644 arch/sparc/include/asm/global_data.h
 delete mode 100644 arch/sparc/include/asm/io.h
 delete mode 100644 arch/sparc/include/asm/irq.h
 delete mode 100644 arch/sparc/include/asm/leon.h
 delete mode 100644 arch/sparc/include/asm/leon2.h
 delete mode 100644 arch/sparc/include/asm/leon3.h
 delete mode 100644 arch/sparc/include/asm/linkage.h
 delete mode 100644 arch/sparc/include/asm/machines.h
 delete mode 100644 arch/sparc/include/asm/page.h
 delete mode 100644 arch/sparc/include/asm/posix_types.h
 delete mode 100644 arch/sparc/include/asm/processor.h
 delete mode 100644 arch/sparc/include/asm/prom.h
 delete mode 100644 arch/sparc/include/asm/psr.h
 delete mode 100644 arch/sparc/include/asm/ptrace.h
 delete mode 100644 arch/sparc/include/asm/sections.h
 delete mode 100644 arch/sparc/include/asm/srmmu.h
 delete mode 100644 arch/sparc/include/asm/stack.h
 delete mode 100644 arch/sparc/include/asm/string.h
 delete mode 100644 arch/sparc/include/asm/types.h
 delete mode 100644 arch/sparc/include/asm/u-boot.h
 delete mode 100644 arch/sparc/include/asm/unaligned.h
 delete mode 100644 arch/sparc/include/asm/winmacro.h
 delete mode 100644 arch/sparc/lib/Makefile
 delete mode 100644 arch/sparc/lib/bootm.c
 delete mode 100644 arch/sparc/lib/cache.c
 delete mode 100644 arch/sparc/lib/interrupts.c
 delete mode 100644 cmd/ambapp.c
 delete mode 100644 configs/gr_cpci_ax2000_defconfig
 delete mode 100644 configs/gr_ep2s60_defconfig
 delete mode 100644 configs/gr_xc3s_1500_defconfig
 delete mode 100644 configs/grsim_defconfig
 delete mode 100644 configs/grsim_leon2_defconfig
 delete mode 100644 drivers/net/greth.c
 delete mode 100644 drivers/net/greth.h
 delete mode 100644 include/ambapp.h
 delete mode 100644 include/ambapp_ids.h
 delete mode 100644 include/configs/gr_cpci_ax2000.h
 delete mode 100644 include/configs/gr_ep2s60.h
 delete mode 100644 include/configs/gr_xc3s_1500.h
 delete mode 100644 include/configs/grsim.h
 delete mode 100644 include/configs/grsim_leon2.h
 delete mode 100644 include/grlib/apbuart.h
 delete mode 100644 include/grlib/gptimer.h
 delete mode 100644 include/grlib/greth.h
 delete mode 100644 include/grlib/irqmp.h

diff --git a/Kconfig b/Kconfig
index 81b4226463ae..af0a30355bf0 100644
--- a/Kconfig
+++ b/Kconfig
@@ -283,7 +283,7 @@ config SYS_EXTRA_OPTIONS
 	  new boards should not use this option.
 
 config SYS_TEXT_BASE
-	depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
+	depends on ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP || \
 		(M68K && !TARGET_ASTRO_MCF5373L) || MICROBLAZE || MIPS || \
 		ARCH_ZYNQ
 	depends on !EFI_APP
diff --git a/MAINTAINERS b/MAINTAINERS
index c1aa594449fa..d628eb715aef 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -408,12 +408,6 @@ S:	Maintained
 T:	git git://git.denx.de/u-boot-sh.git
 F:	arch/sh/
 
-SPARC
-#M:	Francois Retief <fgretief at spaceteq.co.za>
-S:	Orphaned (Since 2016-02)
-T:	git git://git.denx.de/u-boot-sparc.git
-F:	arch/sparc/
-
 SPI
 M:	Jagan Teki <jagan at openedev.com>
 S:	Maintained
diff --git a/README b/README
index 486a71ebef6e..d0e1121a49b0 100644
--- a/README
+++ b/README
@@ -146,7 +146,6 @@ Directory Hierarchy:
   /powerpc		Files generic to PowerPC architecture
   /sandbox		Files generic to HW-independent "sandbox"
   /sh			Files generic to SH architecture
-  /sparc		Files generic to SPARC architecture
   /x86			Files generic to x86 architecture
 /api			Machine/arch independent API for external apps
 /board			Board dependent files
diff --git a/arch/Kconfig b/arch/Kconfig
index 73e419223b5e..6750b5ddf640 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -73,10 +73,6 @@ config SH
 	bool "SuperH architecture"
 	select HAVE_PRIVATE_LIBGCC
 
-config SPARC
-	bool "SPARC architecture"
-	select CREATE_ARCH_SYMLINK
-
 config X86
 	bool "x86 architecture"
 	select CREATE_ARCH_SYMLINK
@@ -164,6 +160,5 @@ source "arch/openrisc/Kconfig"
 source "arch/powerpc/Kconfig"
 source "arch/sandbox/Kconfig"
 source "arch/sh/Kconfig"
-source "arch/sparc/Kconfig"
 source "arch/x86/Kconfig"
 source "arch/xtensa/Kconfig"
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
deleted file mode 100644
index 1d1347b16753..000000000000
--- a/arch/sparc/Kconfig
+++ /dev/null
@@ -1,70 +0,0 @@
-menu "SPARC architecture"
-	depends on SPARC
-
-config LEON
-	bool
-
-config LEON2
-	bool
-	select LEON
-
-config LEON3
-	bool
-	select LEON
-
-config SYS_SPARC_NWINDOWS
-	int "Number of SPARC register windows"
-	range 2 32
-	default "8"
-	help
-	  Specify the number of SPARC register windows implemented by this
-	  processor. A SPARC implementation can have from 2 to 32 windows.
-	  If unsure, choose 8.
-
-choice
-	prompt "Board select"
-	optional
-
-config TARGET_GRSIM_LEON2
-	bool "GRSIM simulating a LEON2 board"
-	select LEON2
-
-config TARGET_GR_CPCI_AX2000
-	bool "Gaisler GR-CPCI-AX2000 board"
-	select LEON3
-
-config TARGET_GR_EP2S60
-	bool "Gaisler Template design for Altera NIOS board with Stratix EP2S60"
-	select LEON3
-	help
-	  Gaisler Research AB's Template design (GPL Open Source SPARC/LEON3
-	  96MHz) for Altera NIOS Development board Stratix II edition,
-	  with the FPGA device EP2S60.
-
-config TARGET_GR_XC3S_1500
-	bool "Gaisler GR-XC3S-1500 spartan board"
-	select LEON3
-
-config TARGET_GRSIM
-	bool "GRSIM simulating a LEON3 GR-XC3S-1500 board"
-	select LEON3
-
-endchoice
-
-config SYS_ARCH
-	default "sparc"
-
-config SYS_CPU
-	default "leon2" if LEON2
-	default "leon3" if LEON3
-
-config SYS_VENDOR
-	default "gaisler"
-
-source "board/gaisler/gr_cpci_ax2000/Kconfig"
-source "board/gaisler/gr_ep2s60/Kconfig"
-source "board/gaisler/gr_xc3s_1500/Kconfig"
-source "board/gaisler/grsim/Kconfig"
-source "board/gaisler/grsim_leon2/Kconfig"
-
-endmenu
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
deleted file mode 100644
index 2d4c9715a615..000000000000
--- a/arch/sparc/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-head-y := arch/sparc/cpu/$(CPU)/start.o
-
-libs-y += arch/sparc/cpu/$(CPU)/
-libs-y += arch/sparc/lib/
diff --git a/arch/sparc/config.mk b/arch/sparc/config.mk
deleted file mode 100644
index 43faad48ceb1..000000000000
--- a/arch/sparc/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2015
-# Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-ifeq ($(CROSS_COMPILE),)
-CROSS_COMPILE := sparc-linux-
-endif
-
-# This GCC compiler is known to work:
-#  https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/4.9.0/
-
-gcclibdir := $(shell dirname `$(CC) -print-libgcc-file-name`)
-
-CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 -L $(gcclibdir) \
-			       -T $(srctree)/examples/standalone/sparc.lds
-
-cpuflags-$(CONFIG_LEON2) := -mcpu=leon
-cpuflags-$(CONFIG_LEON3) := -mcpu=leon3
-
-PLATFORM_CPPFLAGS += $(cpuflags-y)
-
-PLATFORM_RELFLAGS += -fPIC
diff --git a/arch/sparc/cpu/leon2/Makefile b/arch/sparc/cpu/leon2/Makefile
deleted file mode 100644
index 8c95ca56707a..000000000000
--- a/arch/sparc/cpu/leon2/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-extra-y	= start.o
-obj-y	= cpu_init.o serial.o cpu.o interrupts.o prom.o
diff --git a/arch/sparc/cpu/leon2/cpu.c b/arch/sparc/cpu/leon2/cpu.c
deleted file mode 100644
index d044c3abc72f..000000000000
--- a/arch/sparc/cpu/leon2/cpu.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/* CPU specific code for the LEON2 CPU
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void _reset_reloc(void);
-
-int checkcpu(void)
-{
-	/* check LEON version here */
-	printf("CPU: LEON2\n");
-	return 0;
-}
-
-#ifdef CONFIG_DISPLAY_CPUINFO
-
-int print_cpuinfo(void)
-{
-	printf("CPU:   LEON2\n");
-	return 0;
-}
-
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-void cpu_reset(void)
-{
-	/* Interrupts off */
-	disable_interrupts();
-
-	/* jump to restart in flash */
-	_reset_reloc();
-}
-
-int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	cpu_reset();
-
-	return 1;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_GRETH
-int cpu_eth_init(bd_t *bis)
-{
-	return greth_initialize(bis);
-}
-#endif
diff --git a/arch/sparc/cpu/leon2/cpu_init.c b/arch/sparc/cpu/leon2/cpu_init.c
deleted file mode 100644
index 9dfb99cb0f76..000000000000
--- a/arch/sparc/cpu/leon2/cpu_init.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/* Initializes CPU and basic hardware such as memory
- * controllers, IRQ controller and system timer 0.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/asi.h>
-#include <asm/leon.h>
-#include <asm/io.h>
-
-#include <config.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers.
- *
- * Run from FLASH/PROM:
- *  - until memory controller is set up, only registers available
- *  - no global variables available for writing
- *  - constants available
- */
-
-void cpu_init_f(void)
-{
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
-	/* initialize the IRQMP */
-	leon2->Interrupt_Force = 0;
-	leon2->Interrupt_Pending = 0;
-	leon2->Interrupt_Clear = 0xfffe;	/* clear all old pending interrupts */
-	leon2->Interrupt_Mask = 0xfffe0000;	/* mask all IRQs */
-
-	/* cache */
-
-	/* I/O port setup */
-#ifdef LEON2_IO_PORT_DIR
-	leon2->PIO_Direction = LEON2_IO_PORT_DIR;
-#endif
-#ifdef LEON2_IO_PORT_DATA
-	leon2->PIO_Data = LEON2_IO_PORT_DATA;
-#endif
-#ifdef LEON2_IO_PORT_INT
-	leon2->PIO_Interrupt = LEON2_IO_PORT_INT;
-#else
-	leon2->PIO_Interrupt = 0;
-#endif
-
-	/* disable timers */
-	leon2->Timer_Control_1 = leon2->Timer_Control_2 = 0;
-}
-
-int arch_cpu_init(void)
-{
-	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ;
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-
-	return 0;
-}
-
-/*
- * initialize higher level parts of CPU
- */
-int cpu_init_r(void)
-{
-	return 0;
-}
-
-/* initiate and setup timer0 to configured HZ. Base clock is 1MHz.
- */
-int timer_init(void)
-{
-	LEON2_regs *leon2 = (LEON2_regs *)LEON2_PREGS;
-
-	/* initialize prescaler common to all timers to 1MHz */
-	leon2->Scaler_Counter = leon2->Scaler_Reload =
-		(((CONFIG_SYS_CLK_FREQ / 1000) + 500) / 1000) - 1;
-
-	/* SYS_HZ ticks per second */
-	leon2->Timer_Counter_1 = 0;
-	leon2->Timer_Reload_1 = (CONFIG_SYS_TIMER_RATE / CONFIG_SYS_HZ) - 1;
-	leon2->Timer_Control_1 = LEON2_TIMER_CTRL_EN | LEON2_TIMER_CTRL_RS |
-		LEON2_TIMER_CTRL_LD;
-
-	CONFIG_SYS_TIMER_COUNTER = (void *)&leon2->Timer_Counter_1;
-	return 0;
-}
diff --git a/arch/sparc/cpu/leon2/interrupts.c b/arch/sparc/cpu/leon2/interrupts.c
deleted file mode 100644
index 602e4a67ba85..000000000000
--- a/arch/sparc/cpu/leon2/interrupts.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com
- *
- * (C) Copyright 2006
- * Detlev Zundel, DENX Software Engineering, dzu at denx.de
- *
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber at mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm/stack.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <command.h>
-#include <asm/irq.h>
-
-#include <asm/leon.h>
-
-/* 15 normal irqs and a non maskable interrupt */
-#define NR_IRQS 15
-
-struct irq_action {
-	interrupt_handler_t *handler;
-	void *arg;
-	unsigned int count;
-};
-
-static struct irq_action irq_handlers[NR_IRQS] = { {0}, };
-static int spurious_irq_cnt = 0;
-static int spurious_irq = 0;
-
-static inline unsigned int leon2_get_irqmask(unsigned int irq)
-{
-	if ((irq < 0) || (irq >= NR_IRQS)) {
-		return 0;
-	} else {
-		return (1 << irq);
-	}
-}
-
-static void leon2_ic_disable(unsigned int irq)
-{
-	unsigned int mask, pil;
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
-	pil = intLock();
-
-	/* get mask of interrupt */
-	mask = leon2_get_irqmask(irq);
-
-	/* set int level */
-	leon2->Interrupt_Mask =
-	    SPARC_NOCACHE_READ(&leon2->Interrupt_Mask) & (~mask);
-
-	intUnlock(pil);
-}
-
-static void leon2_ic_enable(unsigned int irq)
-{
-	unsigned int mask, pil;
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
-	pil = intLock();
-
-	/* get mask of interrupt */
-	mask = leon2_get_irqmask(irq);
-
-	/* set int level */
-	leon2->Interrupt_Mask =
-	    SPARC_NOCACHE_READ(&leon2->Interrupt_Mask) | mask;
-
-	intUnlock(pil);
-}
-
-void handler_irq(int irq, struct pt_regs *regs)
-{
-	if (irq_handlers[irq].handler) {
-		if (((unsigned int)irq_handlers[irq].handler > CONFIG_SYS_RAM_END) ||
-		    ((unsigned int)irq_handlers[irq].handler < CONFIG_SYS_RAM_BASE)
-		    ) {
-			printf("handler_irq: bad handler: %x, irq number %d\n",
-			       (unsigned int)irq_handlers[irq].handler, irq);
-			return;
-		}
-		irq_handlers[irq].handler(irq_handlers[irq].arg);
-		irq_handlers[irq].count++;
-	} else {
-		spurious_irq_cnt++;
-		spurious_irq = irq;
-	}
-}
-
-void leon2_force_int(int irq)
-{
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
-	if ((irq >= NR_IRQS) || (irq < 0))
-		return;
-	printf("Forcing interrupt %d\n", irq);
-
-	leon2->Interrupt_Force =
-	    SPARC_NOCACHE_READ(&leon2->Interrupt_Force) | (1 << irq);
-}
-
-/****************************************************************************/
-
-int interrupt_init_cpu(void)
-{
-	return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
-{
-	if (irq < 0 || irq >= NR_IRQS) {
-		printf("irq_install_handler: bad irq number %d\n", irq);
-		return;
-	}
-
-	if (irq_handlers[irq].handler != NULL)
-		printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
-		       (ulong) handler, (ulong) irq_handlers[irq].handler);
-
-	if (((unsigned int)handler > CONFIG_SYS_RAM_END) ||
-	    ((unsigned int)handler < CONFIG_SYS_RAM_BASE)
-	    ) {
-		printf("irq_install_handler: bad handler: %x, irq number %d\n",
-		       (unsigned int)handler, irq);
-		return;
-	}
-	irq_handlers[irq].handler = handler;
-	irq_handlers[irq].arg = arg;
-
-	/* enable irq on LEON2 hardware */
-	leon2_ic_enable(irq);
-
-}
-
-void irq_free_handler(int irq)
-{
-	if (irq < 0 || irq >= NR_IRQS) {
-		printf("irq_free_handler: bad irq number %d\n", irq);
-		return;
-	}
-
-	/* disable irq on LEON2 hardware */
-	leon2_ic_disable(irq);
-
-	irq_handlers[irq].handler = NULL;
-	irq_handlers[irq].arg = NULL;
-}
-
-/****************************************************************************/
-
-#if defined(CONFIG_CMD_IRQ)
-void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char * const argv[])
-{
-	int irq;
-	unsigned int pil = get_pil();
-	printf("PIL level: %u\n\r", pil);
-	printf("Spurious IRQ: %u, last unknown IRQ: %d\n",
-	       spurious_irq_cnt, spurious_irq);
-
-	puts("\nInterrupt-Information:\n" "Nr  Routine   Arg       Count\n");
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		if (irq_handlers[irq].handler != NULL) {
-			printf("%02d  %p  %p  %d\n", irq,
-			       irq_handlers[irq].handler,
-			       irq_handlers[irq].arg,
-			       irq_handlers[irq].count);
-		}
-	}
-}
-#endif
diff --git a/arch/sparc/cpu/leon2/prom.c b/arch/sparc/cpu/leon2/prom.c
deleted file mode 100644
index 7829e7abb2e8..000000000000
--- a/arch/sparc/cpu/leon2/prom.c
+++ /dev/null
@@ -1,1032 +0,0 @@
-/* prom.c - emulates a sparc v0 PROM for the linux kernel.
- *
- * Copyright (C) 2003 Konrad Eisele <eiselekd at web.de>
- * Copyright (C) 2004 Stefan Holst <mail at s-holst.de>
- * Copyright (C) 2007 Daniel Hellstrom <daniel at gaisler.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/prom.h>
-#include <asm/machines.h>
-#include <asm/srmmu.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/leon.h>
-
-#include <config.h>
-/*
-#define PRINT_ROM_VEC
-*/
-extern struct linux_romvec *kernel_arg_promvec;
-
-#define PROM_PGT __attribute__ ((__section__ (".prom.pgt")))
-#define PROM_TEXT __attribute__ ((__section__ (".prom.text")))
-#define PROM_DATA __attribute__ ((__section__ (".prom.data")))
-
-void *__prom_start_reloc; /* relocated prom_start address */
-
-/* for __va */
-extern int __prom_start;
-#define PAGE_OFFSET 0xf0000000
-#define phys_base CONFIG_SYS_SDRAM_BASE
-#define PROM_OFFS 8192
-#define PROM_SIZE_MASK (PROM_OFFS-1)
-#define __va(x) ( \
-	(void *)( ((unsigned long)(x))-PROM_OFFS+ \
-	(CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-CONFIG_SYS_TEXT_BASE ) \
-	)
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-CONFIG_SYS_TEXT_BASE))
-
-struct property {
-	char *name;
-	char *value;
-	int length;
-};
-
-struct node {
-	int level;
-	struct property *properties;
-};
-
-static void leon_reboot(char *bcommand);
-static void leon_halt(void);
-static int leon_nbputchar(int c);
-static int leon_nbgetchar(void);
-
-static int no_nextnode(int node);
-static int no_child(int node);
-static int no_proplen(int node, char *name);
-static int no_getprop(int node, char *name, char *value);
-static int no_setprop(int node, char *name, char *value, int len);
-static char *no_nextprop(int node, char *name);
-
-static struct property PROM_TEXT *find_property(int node, char *name);
-static int PROM_TEXT leon_strcmp(const char *s1, const char *s2);
-static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n);
-static void PROM_TEXT leon_reboot_physical(char *bcommand);
-
-void __inline__ leon_flush_cache_all(void)
-{
-	__asm__ __volatile__(" flush ");
-      __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_DFLUSH):"memory");
-}
-
-void __inline__ leon_flush_tlb_all(void)
-{
-	leon_flush_cache_all();
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x400),
-			     "i"(ASI_MMUFLUSH):"memory");
-}
-
-typedef struct {
-	unsigned int ctx_table[256];
-	unsigned int pgd_table[256];
-} sparc_srmmu_setup;
-
-sparc_srmmu_setup srmmu_tables PROM_PGT = {
-	{0},
-	{0x1e,
-	 0x10001e,
-	 0x20001e,
-	 0x30001e,
-	 0x40001e,
-	 0x50001e,
-	 0x60001e,
-	 0x70001e,
-	 0x80001e,
-	 0x90001e,
-	 0xa0001e,
-	 0xb0001e,
-	 0xc0001e,
-	 0xd0001e,
-	 0xe0001e,
-	 0xf0001e,
-	 0x100001e,
-	 0x110001e,
-	 0x120001e,
-	 0x130001e,
-	 0x140001e,
-	 0x150001e,
-	 0x160001e,
-	 0x170001e,
-	 0x180001e,
-	 0x190001e,
-	 0x1a0001e,
-	 0x1b0001e,
-	 0x1c0001e,
-	 0x1d0001e,
-	 0x1e0001e,
-	 0x1f0001e,
-	 0x200001e,
-	 0x210001e,
-	 0x220001e,
-	 0x230001e,
-	 0x240001e,
-	 0x250001e,
-	 0x260001e,
-	 0x270001e,
-	 0x280001e,
-	 0x290001e,
-	 0x2a0001e,
-	 0x2b0001e,
-	 0x2c0001e,
-	 0x2d0001e,
-	 0x2e0001e,
-	 0x2f0001e,
-	 0x300001e,
-	 0x310001e,
-	 0x320001e,
-	 0x330001e,
-	 0x340001e,
-	 0x350001e,
-	 0x360001e,
-	 0x370001e,
-	 0x380001e,
-	 0x390001e,
-	 0x3a0001e,
-	 0x3b0001e,
-	 0x3c0001e,
-	 0x3d0001e,
-	 0x3e0001e,
-	 0x3f0001e,
-	 0x400001e,
-	 0x410001e,
-	 0x420001e,
-	 0x430001e,
-	 0x440001e,
-	 0x450001e,
-	 0x460001e,
-	 0x470001e,
-	 0x480001e,
-	 0x490001e,
-	 0x4a0001e,
-	 0x4b0001e,
-	 0x4c0001e,
-	 0x4d0001e,
-	 0x4e0001e,
-	 0x4f0001e,
-	 0x500001e,
-	 0x510001e,
-	 0x520001e,
-	 0x530001e,
-	 0x540001e,
-	 0x550001e,
-	 0x560001e,
-	 0x570001e,
-	 0x580001e,
-	 0x590001e,
-	 0x5a0001e,
-	 0x5b0001e,
-	 0x5c0001e,
-	 0x5d0001e,
-	 0x5e0001e,
-	 0x5f0001e,
-	 0x600001e,
-	 0x610001e,
-	 0x620001e,
-	 0x630001e,
-	 0x640001e,
-	 0x650001e,
-	 0x660001e,
-	 0x670001e,
-	 0x680001e,
-	 0x690001e,
-	 0x6a0001e,
-	 0x6b0001e,
-	 0x6c0001e,
-	 0x6d0001e,
-	 0x6e0001e,
-	 0x6f0001e,
-	 0x700001e,
-	 0x710001e,
-	 0x720001e,
-	 0x730001e,
-	 0x740001e,
-	 0x750001e,
-	 0x760001e,
-	 0x770001e,
-	 0x780001e,
-	 0x790001e,
-	 0x7a0001e,
-	 0x7b0001e,
-	 0x7c0001e,
-	 0x7d0001e,
-	 0x7e0001e,
-	 0x7f0001e,
-	 0x800001e,
-	 0x810001e,
-	 0x820001e,
-	 0x830001e,
-	 0x840001e,
-	 0x850001e,
-	 0x860001e,
-	 0x870001e,
-	 0x880001e,
-	 0x890001e,
-	 0x8a0001e,
-	 0x8b0001e,
-	 0x8c0001e,
-	 0x8d0001e,
-	 0x8e0001e,
-	 0x8f0001e,
-	 0x900001e,
-	 0x910001e,
-	 0x920001e,
-	 0x930001e,
-	 0x940001e,
-	 0x950001e,
-	 0x960001e,
-	 0x970001e,
-	 0x980001e,
-	 0x990001e,
-	 0x9a0001e,
-	 0x9b0001e,
-	 0x9c0001e,
-	 0x9d0001e,
-	 0x9e0001e,
-	 0x9f0001e,
-	 0xa00001e,
-	 0xa10001e,
-	 0xa20001e,
-	 0xa30001e,
-	 0xa40001e,
-	 0xa50001e,
-	 0xa60001e,
-	 0xa70001e,
-	 0xa80001e,
-	 0xa90001e,
-	 0xaa0001e,
-	 0xab0001e,
-	 0xac0001e,
-	 0xad0001e,
-	 0xae0001e,
-	 0xaf0001e,
-	 0xb00001e,
-	 0xb10001e,
-	 0xb20001e,
-	 0xb30001e,
-	 0xb40001e,
-	 0xb50001e,
-	 0xb60001e,
-	 0xb70001e,
-	 0xb80001e,
-	 0xb90001e,
-	 0xba0001e,
-	 0xbb0001e,
-	 0xbc0001e,
-	 0xbd0001e,
-	 0xbe0001e,
-	 0xbf0001e,
-	 0xc00001e,
-	 0xc10001e,
-	 0xc20001e,
-	 0xc30001e,
-	 0xc40001e,
-	 0xc50001e,
-	 0xc60001e,
-	 0xc70001e,
-	 0xc80001e,
-	 0xc90001e,
-	 0xca0001e,
-	 0xcb0001e,
-	 0xcc0001e,
-	 0xcd0001e,
-	 0xce0001e,
-	 0xcf0001e,
-	 0xd00001e,
-	 0xd10001e,
-	 0xd20001e,
-	 0xd30001e,
-	 0xd40001e,
-	 0xd50001e,
-	 0xd60001e,
-	 0xd70001e,
-	 0xd80001e,
-	 0xd90001e,
-	 0xda0001e,
-	 0xdb0001e,
-	 0xdc0001e,
-	 0xdd0001e,
-	 0xde0001e,
-	 0xdf0001e,
-	 0xe00001e,
-	 0xe10001e,
-	 0xe20001e,
-	 0xe30001e,
-	 0xe40001e,
-	 0xe50001e,
-	 0xe60001e,
-	 0xe70001e,
-	 0xe80001e,
-	 0xe90001e,
-	 0xea0001e,
-	 0xeb0001e,
-	 0xec0001e,
-	 0xed0001e,
-	 0xee0001e,
-	 0xef0001e,
-	 0x400001e		/* default */
-	 }
-};
-
-/* a self contained prom info structure */
-struct leon_reloc_func {
-	struct property *(*find_property) (int node, char *name);
-	int (*strcmp) (char *s1, char *s2);
-	void *(*memcpy) (void *dest, const void *src, size_t n);
-	void (*reboot_physical) (char *cmd);
-};
-
-struct leon_prom_info {
-	int freq_khz;
-	int leon_nctx;
-	int mids[32];
-	int baudrates[2];
-	struct leon_reloc_func reloc_funcs;
-	struct property root_properties[4];
-	struct property cpu_properties[7];
-#undef  CPUENTRY
-#define CPUENTRY(idx) struct property cpu_properties##idx[4]
-	 CPUENTRY(1);
-	 CPUENTRY(2);
-	 CPUENTRY(3);
-	 CPUENTRY(4);
-	 CPUENTRY(5);
-	 CPUENTRY(6);
-	 CPUENTRY(7);
-	 CPUENTRY(8);
-	 CPUENTRY(9);
-	 CPUENTRY(10);
-	 CPUENTRY(11);
-	 CPUENTRY(12);
-	 CPUENTRY(13);
-	 CPUENTRY(14);
-	 CPUENTRY(15);
-	 CPUENTRY(16);
-	 CPUENTRY(17);
-	 CPUENTRY(18);
-	 CPUENTRY(19);
-	 CPUENTRY(20);
-	 CPUENTRY(21);
-	 CPUENTRY(22);
-	 CPUENTRY(23);
-	 CPUENTRY(24);
-	 CPUENTRY(25);
-	 CPUENTRY(26);
-	 CPUENTRY(27);
-	 CPUENTRY(28);
-	 CPUENTRY(29);
-	 CPUENTRY(30);
-	 CPUENTRY(31);
-	struct idprom idprom;
-	struct linux_nodeops nodeops;
-	struct linux_mlist_v0 *totphys_p;
-	struct linux_mlist_v0 totphys;
-	struct linux_mlist_v0 *avail_p;
-	struct linux_mlist_v0 avail;
-	struct linux_mlist_v0 *prommap_p;
-	void (*synchook) (void);
-	struct linux_arguments_v0 *bootargs_p;
-	struct linux_arguments_v0 bootargs;
-	struct linux_romvec romvec;
-	struct node nodes[35];
-	char s_device_type[12];
-	char s_cpu[4];
-	char s_mid[4];
-	char s_idprom[7];
-	char s_compatability[14];
-	char s_leon2[6];
-	char s_mmu_nctx[9];
-	char s_frequency[16];
-	char s_uart1_baud[11];
-	char s_uart2_baud[11];
-	char arg[256];
-};
-
-/* static prom info */
-static struct leon_prom_info PROM_DATA spi = {
-	CONFIG_SYS_CLK_FREQ / 1000,
-	256,
-	{
-#undef	CPUENTRY
-#define	CPUENTRY(idx) idx
-	 CPUENTRY(0),
-	 CPUENTRY(1),
-	 CPUENTRY(2),
-	 CPUENTRY(3),
-	 CPUENTRY(4),
-	 CPUENTRY(5),
-	 CPUENTRY(6),
-	 CPUENTRY(7),
-	 CPUENTRY(8),
-	 CPUENTRY(9),
-	 CPUENTRY(10),
-	 CPUENTRY(11),
-	 CPUENTRY(12),
-	 CPUENTRY(13),
-	 CPUENTRY(14),
-	 CPUENTRY(15),
-	 CPUENTRY(16),
-	 CPUENTRY(17),
-	 CPUENTRY(18),
-	 CPUENTRY(19),
-	 CPUENTRY(20),
-	 CPUENTRY(21),
-	 CPUENTRY(22),
-	 CPUENTRY(23),
-	 CPUENTRY(24),
-	 CPUENTRY(25),
-	 CPUENTRY(26),
-	 CPUENTRY(27),
-	 CPUENTRY(28),
-	 CPUENTRY(29),
-	 CPUENTRY(30),
-	 31},
-	{38400, 38400},
-	{
-	 __va(find_property),
-	 __va(leon_strcmp),
-	 __va(leon_memcpy),
-	 __phy(leon_reboot_physical),
-	 },
-	{
-	 {__va(spi.s_device_type), __va(spi.s_idprom), 4},
-	 {__va(spi.s_idprom), (char *)__va(&spi.idprom), sizeof(struct idprom)},
-	 {__va(spi.s_compatability), __va(spi.s_leon2), 5},
-	 {NULL, NULL, -1}
-	 },
-	{
-	 {__va(spi.s_device_type), __va(spi.s_cpu), 4},
-	 {__va(spi.s_mid), __va(&spi.mids[0]), 4},
-	 {__va(spi.s_mmu_nctx), (char *)__va(&spi.leon_nctx), 4},
-	 {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4},
-	 {__va(spi.s_uart1_baud), (char *)__va(&spi.baudrates[0]), 4},
-	 {__va(spi.s_uart2_baud), (char *)__va(&spi.baudrates[1]), 4},
-	 {NULL, NULL, -1}
-	 },
-#undef  CPUENTRY
-#define CPUENTRY(idx) \
-	{ /* cpu_properties */						\
-		{__va(spi.s_device_type), __va(spi.s_cpu), 4},		\
-		{__va(spi.s_mid), __va(&spi.mids[idx]), 4},			\
-		{__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4},	\
-		{NULL, NULL, -1}						\
-	}
-	CPUENTRY(1),
-	CPUENTRY(2),
-	CPUENTRY(3),
-	CPUENTRY(4),
-	CPUENTRY(5),
-	CPUENTRY(6),
-	CPUENTRY(7),
-	CPUENTRY(8),
-	CPUENTRY(9),
-	CPUENTRY(10),
-	CPUENTRY(11),
-	CPUENTRY(12),
-	CPUENTRY(13),
-	CPUENTRY(14),
-	CPUENTRY(15),
-	CPUENTRY(16),
-	CPUENTRY(17),
-	CPUENTRY(18),
-	CPUENTRY(19),
-	CPUENTRY(20),
-	CPUENTRY(21),
-	CPUENTRY(22),
-	CPUENTRY(23),
-	CPUENTRY(24),
-	CPUENTRY(25),
-	CPUENTRY(26),
-	CPUENTRY(27),
-	CPUENTRY(28),
-	CPUENTRY(29),
-	CPUENTRY(30),
-	CPUENTRY(31),
-	{
-	 0x01,			/* format */
-	 M_LEON2 | M_LEON2_SOC,	/* machine type */
-	 {0, 0, 0, 0, 0, 0},	/* eth */
-	 0,			/* date */
-	 0,			/* sernum */
-	 0,			/* checksum */
-	 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}	/* reserved */
-	 },
-	{
-	 __va(no_nextnode),
-	 __va(no_child),
-	 __va(no_proplen),
-	 __va(no_getprop),
-	 __va(no_setprop),
-	 __va(no_nextprop)
-	 },
-	__va(&spi.totphys),
-	{
-	 NULL,
-	 (char *)CONFIG_SYS_SDRAM_BASE,
-	 0,
-	 },
-	__va(&spi.avail),
-	{
-	 NULL,
-	 (char *)CONFIG_SYS_SDRAM_BASE,
-	 0,
-	 },
-	NULL,			/* prommap_p */
-	NULL,
-	__va(&spi.bootargs),
-	{
-	 {NULL, __va(spi.arg), NULL /*... */ },
-	 /*... */
-	 },
-	{
-	 0,
-	 0,			/* sun4c v0 prom */
-	 0, 0,
-	 {__va(&spi.totphys_p), __va(&spi.prommap_p), __va(&spi.avail_p)},
-	 __va(&spi.nodeops),
-	 NULL, {NULL /* ... */ },
-	 NULL, NULL,
-	 NULL, NULL,		/* pv_getchar, pv_putchar */
-	 __va(leon_nbgetchar), __va(leon_nbputchar),
-	 NULL,
-	 __va(leon_reboot),
-	 NULL,
-	 NULL,
-	 NULL,
-	 __va(leon_halt),
-	 __va(&spi.synchook),
-	 {NULL},
-	 __va(&spi.bootargs_p)
-	 /*... */
-	 },
-	{
-	 {0, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ },
-	 {0, __va(spi.root_properties)},
-	 /* cpu 0, must be spi.nodes[2] see leon_prom_init() */
-	 {1, __va(spi.cpu_properties)},
-
-#undef  CPUENTRY
-#define CPUENTRY(idx) \
-	  {1, __va(spi.cpu_properties##idx) }	/* cpu <idx> */
-	 CPUENTRY(1),
-	 CPUENTRY(2),
-	 CPUENTRY(3),
-	 CPUENTRY(4),
-	 CPUENTRY(5),
-	 CPUENTRY(6),
-	 CPUENTRY(7),
-	 CPUENTRY(8),
-	 CPUENTRY(9),
-	 CPUENTRY(10),
-	 CPUENTRY(11),
-	 CPUENTRY(12),
-	 CPUENTRY(13),
-	 CPUENTRY(14),
-	 CPUENTRY(15),
-	 CPUENTRY(16),
-	 CPUENTRY(17),
-	 CPUENTRY(18),
-	 CPUENTRY(19),
-	 CPUENTRY(20),
-	 CPUENTRY(21),
-	 CPUENTRY(22),
-	 CPUENTRY(23),
-	 CPUENTRY(24),
-	 CPUENTRY(25),
-	 CPUENTRY(26),
-	 CPUENTRY(27),
-	 CPUENTRY(28),
-	 CPUENTRY(29),
-	 CPUENTRY(30),
-	 CPUENTRY(31),
-	 {-1, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ }
-	 },
-	"device_type",
-	"cpu",
-	"mid",
-	"idprom",
-	"compatability",
-	"leon2",
-	"mmu-nctx",
-	"clock-frequency",
-	"uart1_baud",
-	"uart2_baud",
-	CONFIG_DEFAULT_KERNEL_COMMAND_LINE
-};
-
-/* from arch/sparc/kernel/setup.c */
-#define RAMDISK_LOAD_FLAG 0x4000
-extern unsigned short root_flags;
-extern unsigned short root_dev;
-extern unsigned short ram_flags;
-extern unsigned int sparc_ramdisk_image;
-extern unsigned int sparc_ramdisk_size;
-extern int root_mountflags;
-
-extern char initrd_end, initrd_start;
-
-/* Reboot the CPU = jump to beginning of flash again.
- *
- * Make sure that all function are inlined here.
- */
-static void PROM_TEXT leon_reboot(char *bcommand)
-{
-	register char *arg = bcommand;
-	void __attribute__ ((noreturn)) (*reboot_physical) (char *cmd);
-
-	/* get physical address */
-	struct leon_prom_info *pspi =
-	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	unsigned int *srmmu_ctx_table;
-
-	/* Turn of Interrupts */
-	set_pil(0xf);
-
-	/* Set kernel's context, context zero */
-	srmmu_set_context(0);
-
-	/* Get physical address of the MMU shutdown routine */
-	reboot_physical = (void *)
-	    SPARC_BYPASS_READ(&pspi->reloc_funcs.reboot_physical);
-
-	/* Now that we know the physical address of the function
-	 * we can make the MMU allow jumping to it.
-	 */
-	srmmu_ctx_table = (unsigned int *)srmmu_get_ctable_ptr();
-
-	srmmu_ctx_table = (unsigned int *)SPARC_BYPASS_READ(srmmu_ctx_table);
-
-	/* get physical address of kernel's context table (assume ptd) */
-	srmmu_ctx_table = (unsigned int *)
-	    (((unsigned int)srmmu_ctx_table & 0xfffffffc) << 4);
-
-	/* enable access to physical address of MMU shutdown function */
-	SPARC_BYPASS_WRITE(&srmmu_ctx_table
-			   [((unsigned int)reboot_physical) >> 24],
-			   (((unsigned int)reboot_physical & 0xff000000) >> 4) |
-			   0x1e);
-
-	/* flush TLB cache */
-	leon_flush_tlb_all();
-
-	/* flash instruction & data cache */
-	sparc_icache_flush_all();
-	sparc_dcache_flush_all();
-
-	/* jump to physical address function
-	 * so that when the MMU is disabled
-	 * we can continue to execute
-	 */
-	reboot_physical(arg);
-}
-
-static void PROM_TEXT leon_reboot_physical(char *bcommand)
-{
-	void __attribute__ ((noreturn)) (*reset) (void);
-
-	/* Turn off MMU */
-	srmmu_set_mmureg(0);
-
-	/* Hardcoded start address */
-	reset = CONFIG_SYS_MONITOR_BASE;
-
-	/* flush data cache */
-	sparc_dcache_flush_all();
-
-	/* flush instruction cache */
-	sparc_icache_flush_all();
-
-	/* Jump to start in Flash */
-	reset();
-}
-
-static void PROM_TEXT leon_halt(void)
-{
-	while (1) ;
-}
-
-/* get single char, don't care for blocking*/
-static int PROM_TEXT leon_nbgetchar(void)
-{
-	return -1;
-}
-
-/* put single char, don't care for blocking*/
-static int PROM_TEXT leon_nbputchar(int c)
-{
-	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
-
-	/***** put char in buffer... ***********
-	 * Make sure all functions are inline! *
-	 ***************************************/
-
-	/* Wait for last character to go. */
-	while (!(SPARC_BYPASS_READ(&leon2->UART_Status_1)
-		 & LEON2_UART_STAT_THE)) ;
-
-	/* Send data */
-	SPARC_BYPASS_WRITE(&leon2->UART_Channel_1, c);
-
-	/* Wait for data to be sent */
-	while (!(SPARC_BYPASS_READ(&leon2->UART_Status_1)
-		 & LEON2_UART_STAT_TSE)) ;
-
-	return 0;
-}
-
-/* node ops */
-
-/*#define nodes ((struct node *)__va(&pspi->nodes))*/
-#define nodes ((struct node *)(pspi->nodes))
-
-static int PROM_TEXT no_nextnode(int node)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi =
-	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	if (nodes[node].level == nodes[node + 1].level)
-		return node + 1;
-	return -1;
-}
-
-static int PROM_TEXT no_child(int node)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	if (nodes[node].level == nodes[node + 1].level - 1)
-		return node + 1;
-	return -1;
-}
-
-static struct property PROM_TEXT *find_property(int node, char *name)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	struct property *prop = &nodes[node].properties[0];
-	while (prop && prop->name) {
-		if (pspi->reloc_funcs.strcmp(prop->name, name) == 0)
-			return prop;
-		prop++;
-	}
-	return NULL;
-}
-
-static int PROM_TEXT no_proplen(int node, char *name)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	struct property *prop = pspi->reloc_funcs.find_property(node, name);
-	if (prop)
-		return prop->length;
-	return -1;
-}
-
-static int PROM_TEXT no_getprop(int node, char *name, char *value)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	struct property *prop = pspi->reloc_funcs.find_property(node, name);
-	if (prop) {
-		pspi->reloc_funcs.memcpy(value, prop->value, prop->length);
-		return 1;
-	}
-	return -1;
-}
-
-static int PROM_TEXT no_setprop(int node, char *name, char *value, int len)
-{
-	return -1;
-}
-
-static char PROM_TEXT *no_nextprop(int node, char *name)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-	struct property *prop;
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	if (!name || !name[0])
-		return nodes[node].properties[0].name;
-
-	prop = pspi->reloc_funcs.find_property(node, name);
-	if (prop)
-		return prop[1].name;
-	return NULL;
-}
-
-static int PROM_TEXT leon_strcmp(const char *s1, const char *s2)
-{
-	register char result;
-
-	while (1) {
-		result = *s1 - *s2;
-		if (result || !*s1)
-			break;
-		s2++;
-		s1++;
-	}
-
-	return result;
-}
-
-static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n)
-{
-	char *dst = (char *)dest, *source = (char *)src;
-
-	while (n--) {
-		*dst = *source;
-		dst++;
-		source++;
-	}
-	return dest;
-}
-
-#define GETREGSP(sp) __asm__ __volatile__("mov %%sp, %0" : "=r" (sp))
-
-void leon_prom_init(struct leon_prom_info *pspi)
-{
-	unsigned long i;
-	unsigned char cksum, *ptr;
-	char *addr_str, *end;
-	unsigned long sp;
-	GETREGSP(sp);
-
-	pspi->freq_khz = CONFIG_SYS_CLK_FREQ / 1000;
-
-	/* Set Available main memory size */
-	pspi->totphys.num_bytes = CONFIG_SYS_PROM_OFFSET - CONFIG_SYS_SDRAM_BASE;
-	pspi->avail.num_bytes = pspi->totphys.num_bytes;
-
-#undef nodes
-	pspi->nodes[3].level = -1;
-	pspi->nodes[3].properties = __va(spi.root_properties + 3);
-
-	/* Set Ethernet MAC address from environment */
-	if ((addr_str = getenv("ethaddr")) != NULL) {
-		for (i = 0; i < 6; i++) {
-			pspi->idprom.id_ethaddr[i] = addr_str ?
-			    simple_strtoul(addr_str, &end, 16) : 0;
-			if (addr_str) {
-				addr_str = (*end) ? end + 1 : end;
-			}
-		}
-	} else {
-		/* HW Address not found in environment,
-		 * Set default HW address
-		 */
-		pspi->idprom.id_ethaddr[0] = 0;
-		pspi->idprom.id_ethaddr[1] = 0;
-		pspi->idprom.id_ethaddr[2] = 0;
-		pspi->idprom.id_ethaddr[3] = 0;
-		pspi->idprom.id_ethaddr[4] = 0;
-		pspi->idprom.id_ethaddr[5] = 0;
-	}
-
-	ptr = (unsigned char *)&pspi->idprom;
-	for (i = cksum = 0; i <= 0x0E; i++)
-		cksum ^= *ptr++;
-	pspi->idprom.id_cksum = cksum;
-}
-
-static inline void set_cache(unsigned long regval)
-{
-	asm volatile ("sta %0, [%%g0] %1\n\t":: "r" (regval), "i"(2):"memory");
-}
-
-extern unsigned short bss_start, bss_end;
-
-/* mark as section .img.main.text, to be referenced in linker script */
-int prom_init(void)
-{
-	struct leon_prom_info *pspi = (void *)
-	    ((((unsigned int)&spi) & PROM_SIZE_MASK) + CONFIG_SYS_PROM_OFFSET);
-
-	/* disable mmu */
-	srmmu_set_mmureg(0x00000000);
-	__asm__ __volatile__("flush\n\t");
-
-	/* init prom info struct */
-	leon_prom_init(pspi);
-
-	kernel_arg_promvec = &pspi->romvec;
-#ifdef PRINT_ROM_VEC
-	printf("Kernel rom vec: 0x%lx\n", (unsigned int)(&pspi->romvec));
-#endif
-	return 0;
-}
-
-/* Copy current kernel boot argument to ROMvec */
-void prepare_bootargs(char *bootargs)
-{
-	struct leon_prom_info *pspi;
-	char *src, *dst;
-	int left;
-
-	/* if no bootargs set, skip copying ==> default bootline */
-	if (bootargs && (*bootargs != '\0')) {
-		pspi = (void *)((((unsigned int)&spi) & PROM_SIZE_MASK) +
-				CONFIG_SYS_PROM_OFFSET);
-		src = bootargs;
-		dst = &pspi->arg[0];
-		left = 255;	/* max len */
-		while (*src && left > 0) {
-			*dst++ = *src++;
-			left--;
-		}
-		/* terminate kernel command line string */
-		*dst = 0;
-	}
-}
-
-void srmmu_init_cpu(unsigned int entry)
-{
-	sparc_srmmu_setup *psrmmu_tables = (void *)
-	    ((((unsigned int)&srmmu_tables) & PROM_SIZE_MASK) +
-	     CONFIG_SYS_PROM_OFFSET);
-
-	/* Make context 0 (kernel's context) point
-	 * to our prepared memory mapping
-	 */
-#define PTD 1
-	psrmmu_tables->ctx_table[0] =
-	    ((unsigned int)&psrmmu_tables->pgd_table[0x00]) >> 4 | PTD;
-
-	/* Set virtual kernel address 0xf0000000
-	 * to SRAM/SDRAM address.
-	 * Make it READ/WRITE/EXEC to SuperUser
-	 */
-#define PTE 2
-#define ACC_SU_ALL 0x1c
-	psrmmu_tables->pgd_table[0xf0] =
-	    (CONFIG_SYS_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf1] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf2] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf3] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf4] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf5] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf6] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf7] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
-
-	/* convert rom vec pointer to virtual address */
-	kernel_arg_promvec = (struct linux_romvec *)
-	    (((unsigned int)kernel_arg_promvec & 0x0fffffff) | 0xf0000000);
-
-	/* Set Context pointer to point to context table
-	 * 256 contexts supported.
-	 */
-	srmmu_set_ctable_ptr((unsigned int)&psrmmu_tables->ctx_table[0]);
-
-	/* Set kernel's context, context zero */
-	srmmu_set_context(0);
-
-	/* Invalidate all Cache */
-	__asm__ __volatile__("flush\n\t");
-
-	srmmu_set_mmureg(0x00000001);
-	leon_flush_tlb_all();
-	leon_flush_cache_all();
-}
diff --git a/arch/sparc/cpu/leon2/serial.c b/arch/sparc/cpu/leon2/serial.c
deleted file mode 100644
index 460abd1d9f5e..000000000000
--- a/arch/sparc/cpu/leon2/serial.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/* GRLIB APBUART Serial controller driver
- *
- * (C) Copyright 2008, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <serial.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static unsigned leon2_serial_calc_scaler(unsigned freq, unsigned baud)
-{
-	return (((freq*10) / (baud*8)) - 5) / 10;
-}
-
-static int leon2_serial_init(void)
-{
-	LEON2_regs *leon2 = (LEON2_regs *)LEON2_PREGS;
-	LEON2_Uart_regs *regs;
-	unsigned int tmp;
-
-#if LEON2_CONSOLE_SELECT == LEON_CONSOLE_UART1
-	regs = (LEON2_Uart_regs *)&leon2->UART_Channel_1;
-#else
-	regs = (LEON2_Uart_regs *)&leon2->UART_Channel_2;
-#endif
-
-	/* Set scaler / baud rate */
-	tmp = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, CONFIG_BAUDRATE);
-	writel(tmp, &regs->UART_Scaler);
-
-	/* Let bit 11 be unchanged (debug bit for GRMON) */
-	tmp = readl(&regs->UART_Control) & LEON2_UART_CTRL_DBG;
-	tmp |= (LEON2_UART1_LOOPBACK_ENABLE << 7);
-	tmp |= (LEON2_UART1_FLOWCTRL_ENABLE << 6);
-	tmp |= (LEON2_UART1_PARITY_ENABLE << 5);
-	tmp |= (LEON2_UART1_ODDPAR_ENABLE << 4);
-	/* Receiver & transmitter enable */
-	tmp |= (LEON2_UART_CTRL_RE | LEON2_UART_CTRL_TE);
-	writel(tmp, &regs->UART_Control);
-
-	gd->arch.uart = regs;
-	return 0;
-}
-
-static inline LEON2_Uart_regs *leon2_get_uart_regs(void)
-{
-	LEON2_Uart_regs *uart = gd->arch.uart;
-
-	return uart;
-}
-
-static void leon2_serial_putc_raw(const char c)
-{
-	LEON2_Uart_regs *uart = leon2_get_uart_regs();
-
-	if (!uart)
-		return;
-
-	/* Wait for last character to go. */
-	while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_THE))
-		WATCHDOG_RESET();
-
-	/* Send data */
-	writel(c, &uart->UART_Channel);
-
-#ifdef LEON_DEBUG
-	/* Wait for data to be sent */
-	while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_TSE))
-		WATCHDOG_RESET();
-#endif
-}
-
-static void leon2_serial_putc(const char c)
-{
-	if (c == '\n')
-		leon2_serial_putc_raw('\r');
-
-	leon2_serial_putc_raw(c);
-}
-
-static int leon2_serial_getc(void)
-{
-	LEON2_Uart_regs *uart = leon2_get_uart_regs();
-
-	if (!uart)
-		return 0;
-
-	/* Wait for a character to arrive. */
-	while (!(readl(&uart->UART_Status) & LEON2_UART_STAT_DR))
-		WATCHDOG_RESET();
-
-	/* Read character data */
-	return readl(&uart->UART_Channel);
-}
-
-static int leon2_serial_tstc(void)
-{
-	LEON2_Uart_regs *uart = leon2_get_uart_regs();
-
-	if (!uart)
-		return 0;
-
-	return readl(&uart->UART_Status) & LEON2_UART_STAT_DR;
-}
-
-static void leon2_serial_setbrg(void)
-{
-	LEON2_Uart_regs *uart = leon2_get_uart_regs();
-	unsigned int scaler;
-
-	if (!uart)
-		return;
-
-	if (!gd->baudrate)
-		gd->baudrate = CONFIG_BAUDRATE;
-
-	scaler = leon2_serial_calc_scaler(CONFIG_SYS_CLK_FREQ, gd->baudrate);
-
-	writel(scaler, &uart->UART_Scaler);
-}
-
-static struct serial_device leon2_serial_drv = {
-	.name	= "leon2_serial",
-	.start	= leon2_serial_init,
-	.stop	= NULL,
-	.setbrg	= leon2_serial_setbrg,
-	.putc	= leon2_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= leon2_serial_getc,
-	.tstc	= leon2_serial_tstc,
-};
-
-void leon2_serial_initialize(void)
-{
-	serial_register(&leon2_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &leon2_serial_drv;
-}
diff --git a/arch/sparc/cpu/leon2/start.S b/arch/sparc/cpu/leon2/start.S
deleted file mode 100644
index 1b404da36291..000000000000
--- a/arch/sparc/cpu/leon2/start.S
+++ /dev/null
@@ -1,695 +0,0 @@
-/* This is where the SPARC/LEON3 starts
- *
- * Copyright (C) 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/asmmacro.h>
-#include <asm/winmacro.h>
-#include <asm/psr.h>
-#include <asm/stack.h>
-#include <asm/leon.h>
-
-/* Entry for traps which jump to a programmer-specified trap handler.  */
-#define TRAPR(H)  \
-	wr	%g0, 0xfe0, %psr; \
-	mov	%g0, %tbr; \
-	ba	(H); \
-	mov	%g0, %wim;
-
-#define TRAP(H) \
-	mov	%psr, %l0; \
-	ba	(H); \
-	nop; nop;
-
-#define TRAPI(ilevel) \
-	mov	ilevel, %l7; \
-	mov	%psr, %l0; \
-	b	_irq_entry; \
-	mov	%wim, %l3
-
-/* Unexcpected trap will halt the processor by forcing it to error state */
-#undef BAD_TRAP
-#define BAD_TRAP ta 0; nop; nop; nop;
-
-/* Software trap. Treat as BAD_TRAP for the time being... */
-#define SOFT_TRAP TRAP(_hwerr)
-
-#define PSR_INIT   0x1FC0	/* Disable traps, set s and ps */
-#define WIM_INIT   2
-
-/* All traps low-level code here must end with this macro. */
-#define RESTORE_ALL b ret_trap_entry; clr %l6;
-
-#define WRITE_PAUSE nop;nop;nop
-
-WINDOWSIZE = (16 * 4)
-ARGPUSHSIZE = (6 * 4)
-ARGPUSH = (WINDOWSIZE + 4)
-MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
-
-/* Number of register windows */
-#ifndef CONFIG_SYS_SPARC_NWINDOWS
-#error Must define number of SPARC register windows, default is 8
-#endif
-
-/* Macros to load address into a register. Uses GOT table for PIC */
-#ifdef __PIC__
-
-#define SPARC_PIC_THUNK_CALL(reg) \
-	sethi	%pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \
-	call	__sparc_get_pc_thunk.reg; \
-	 add	%##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg;
-
-#define SPARC_LOAD_ADDRESS(sym, got, reg) \
-	sethi	%gdop_hix22(sym), %##reg; \
-	xor	%##reg, %gdop_lox10(sym), %##reg; \
-	ld	[%##got + %##reg], %##reg, %gdop(sym);
-
-#else
-
-#define SPARC_PIC_THUNK_CALL(reg)
-#define SPARC_LOAD_ADDRESS(sym, got, tmp) \
-	set	sym, %##reg;
-
-#endif
-
-#define STACK_ALIGN	8
-#define SA(X)	(((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
-
-	.section ".start", "ax"
-	.globl	_start, start, _trap_table
-	.globl  _irq_entry, nmi_trap
-	.globl  _reset_reloc
-
-/* at address 0
- * Hardware traps
- */
-start:
-_start:
-_trap_table:
-	TRAPR(_hardreset);		! 00 reset trap
-	BAD_TRAP;			! 01 instruction_access_exception
-	BAD_TRAP;			! 02 illegal_instruction
-	BAD_TRAP;			! 03 priveleged_instruction
-	BAD_TRAP;			! 04 fp_disabled
-	TRAP(_window_overflow);		! 05 window_overflow
-	TRAP(_window_underflow);	! 06 window_underflow
-	BAD_TRAP;			! 07 Memory Address Not Aligned
-	BAD_TRAP;			! 08 Floating Point Exception
-	BAD_TRAP;			! 09 Data Miss Exception
-	BAD_TRAP;			! 0a Tagged Instruction Ovrflw
-	BAD_TRAP;			! 0b Watchpoint Detected
-	BAD_TRAP;			! 0c
-	BAD_TRAP;			! 0d
-	BAD_TRAP;			! 0e
-	BAD_TRAP;			! 0f
-	BAD_TRAP;			! 10
-	TRAPI(1);			! 11 IRQ level 1
-	TRAPI(2);			! 12 IRQ level 2
-	TRAPI(3);			! 13 IRQ level 3
-	TRAPI(4);			! 14 IRQ level 4
-	TRAPI(5);			! 15 IRQ level 5
-	TRAPI(6);			! 16 IRQ level 6
-	TRAPI(7);			! 17 IRQ level 7
-	TRAPI(8);			! 18 IRQ level 8
-	TRAPI(9);			! 19 IRQ level 9
-	TRAPI(10);			! 1a IRQ level 10
-	TRAPI(11);			! 1b IRQ level 11
-	TRAPI(12);			! 1c IRQ level 12
-	TRAPI(13);			! 1d IRQ level 13
-	TRAPI(14);			! 1e IRQ level 14
-	TRAP(_nmi_trap);		! 1f IRQ level 15 /
-					! NMI (non maskable interrupt)
-	BAD_TRAP;			! 20 r_register_access_error
-	BAD_TRAP;			! 21 instruction access error
-	BAD_TRAP;			! 22
-	BAD_TRAP;			! 23
-	BAD_TRAP;			! 24 co-processor disabled
-	BAD_TRAP;			! 25 uniplemented FLUSH
-	BAD_TRAP;			! 26
-	BAD_TRAP;			! 27
-	BAD_TRAP;			! 28 co-processor exception
-	BAD_TRAP;			! 29 data access error
-	BAD_TRAP;			! 2a division by zero
-	BAD_TRAP;			! 2b data store error
-	BAD_TRAP;			! 2c data access MMU miss
-	BAD_TRAP;			! 2d
-	BAD_TRAP;			! 2e
-	BAD_TRAP;			! 2f
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 30-33
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 34-37
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 38-3b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 3c-3f
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 40-43
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 44-47
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 48-4b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 4c-4f
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 50-53
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 54-57
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 58-5b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 5c-5f
-
-	/* implementaion dependent */
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 60-63
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 64-67
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 68-6b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 6c-6f
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 70-73
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 74-77
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 78-7b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 7c-7f
-
-	/* Software traps, not handled */
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 80-83
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 84-87
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 88-8b
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 8c-8f
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 90-93
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 94-97
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 98-9b
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 9c-9f
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! a0-a3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! a4-a7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! a8-ab
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! ac-af
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! b0-b3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! b4-b7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! b8-bb
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! bc-bf
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! c0-c3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! c4-c7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! c8-cb
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! cc-cf
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! d0-d3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! d4-d7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! d8-db
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! dc-df
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! e0-e3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! e4-e7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! e8-eb
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! ec-ef
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! f0-f3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! f4-f7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! f8-fb
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! fc-ff
-
-	.section	".text"
-	.align 4
-
-_hardreset:
-1000:
-	flush
-	nop
-	nop
-	nop
-
-	/* Init Cache */
-	set     (LEON2_PREGS+LEON_REG_CACHECTRL_OFFSET), %g1
-	set     0x0081000f, %g2
-	st      %g2, [%g1]
-
-	mov	%g0, %y
-	clr	%g1
-	clr	%g2
-	clr	%g3
-	clr	%g4
-	clr	%g5
-	clr	%g6
-	clr	%g7
-
-	mov	%asr17, %g3
-	and	%g3, 0x1f, %g3
-clear_window:
-	mov	%g0, %l0
-	mov	%g0, %l1
-	mov	%g0, %l2
-	mov	%g0, %l3
-	mov	%g0, %l4
-	mov	%g0, %l5
-	mov	%g0, %l6
-	mov	%g0, %l7
-	mov	%g0, %o0
-	mov	%g0, %o1
-	mov	%g0, %o2
-	mov	%g0, %o3
-	mov	%g0, %o4
-	mov	%g0, %o5
-	mov	%g0, %o6
-	mov	%g0, %o7
-	subcc	%g3, 1, %g3
-	bge	clear_window
-	save
-
-leon2_init:
-	/* LEON2 Register Base in g1 */
-	set	LEON2_PREGS, %g1
-
-leon2_init_cache:
-	/* Set Cache control register */
-	set	0x1000f, %g2
-	st	%g2, [%g1 + 0x14]
-
-leon2_init_clear:
-
-	/* Clear LEON2 registers */
-	st	%g0, [%g1 + LEON2_ECTRL]
-	st	%g0, [%g1 + LEON2_IMASK]
-	st	%g0, [%g1 + LEON2_IPEND]
-	st	%g0, [%g1 + LEON2_IFORCE]
-	st	%g0, [%g1 + LEON2_ICLEAR]
-	st	%g0, [%g1 + LEON2_IOREG]
-	st	%g0, [%g1 + LEON2_IODIR]
-	st	%g0, [%g1 + LEON2_IOICONF]
-	st	%g0, [%g1 + LEON2_UCTRL0]
-	st	%g0, [%g1 + LEON2_UCTRL1]
-
-leon2_init_ioport:
-	/* I/O port initialization */
-	set	0xaa00, %g2
-	st	%g2, [%g1 + LEON2_IOREG]
-
-leon2_init_mctrl:
-
-	/* memory config register 1 */
-	set	CONFIG_SYS_GRLIB_MEMCFG1, %g2
-	ld	[%g1], %g3		!
-	and	%g3, 0x300, %g3
-	or	%g2, %g3, %g2
-	st	%g2, [%g1 + LEON2_MCFG1]
-	set	CONFIG_SYS_GRLIB_MEMCFG2, %g2		! Load memory config register 2
-#if !( defined(TSIM) || !defined(BZIMAGE))
-	st	%g2, [%g1 + LEON2_MCFG2]	! only for prom version, else done by "dumon -i"
-#endif
-	set	CONFIG_SYS_GRLIB_MEMCFG3, %g2		! Init FT register
-	st	%g2, [%g1 + LEON2_ECTRL]
-	ld	[%g1 + LEON2_ECTRL], %g2
-	srl	%g2, 30, %g2
-	andcc	%g2, 3, %g6
-	bne,a	leon2_init_wim
-	 mov	%g0, %asr16		! clear err_reg
-
-leon2_init_wim:
-	set	WIM_INIT, %g3
-	mov	%g3, %wim
-
-leon2_init_psr:
-	set	0x1000, %g3
-	mov	%psr, %g2
-	wr	%g2, %g3, %psr
-	nop
-	nop
-	nop
-
-leon2_init_stackp:
-	set	CONFIG_SYS_INIT_SP_OFFSET, %fp
-	andn	%fp, 0x0f, %fp
-	sub	%fp, 64, %sp
-
-leon2_init_tbr:
-	set	CONFIG_SYS_TEXT_BASE, %g2
-	wr	%g0, %g2, %tbr
-	nop
-	nop
-	nop
-
-cpu_init_unreloc:
-	call	cpu_init_f
-	 nop
-
-board_init_unreloc:
-	call	board_init_f
-	 clr	%o0			! boot_flags
-
-dead_unreloc:
-	ba	dead_unreloc		! infinte loop
-	 nop
-
-!-------------------------------------------------------------------------------
-
-/* void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM after
- * relocating the monitor code.
- *
- * %o0 = Relocated stack pointer
- * %o1 = Relocated global data pointer
- * %o2 = Relocated text pointer
- */
-	.globl	relocate_code
-	.type	relocate_code, #function
-	.align	4
-relocate_code:
-	SPARC_PIC_THUNK_CALL(l7)
-
-/* un relocated start address of monitor */
-#define TEXT_START _text
-
-/* un relocated end address of monitor */
-#define DATA_END __init_end
-
-reloc:
-	SPARC_LOAD_ADDRESS(TEXT_START, l7, g2)
-	SPARC_LOAD_ADDRESS(DATA_END, l7, g3)
-	mov	%o2, %g4		! relocation address
-	sub	%g4, %g2, %g6		! relocation offset
-	/* copy .text & .data to relocated address */
-10:	ldd	[%g2], %l0
-	ldd	[%g2+8], %l2
-	std	%l0, [%g4]
-	std	%l2, [%g4+8]
-	inc	16, %g2			! src += 16
-	cmp	%g2, %g3
-	bcs	10b			! while (src < end)
-	 inc	16, %g4			! dst += 16
-
-	clr	%l0
-	clr	%l1
-	clr	%l2
-	clr	%l3
-	clr	%g2
-
-/* register g4 contain address to start
- * This means that BSS must be directly after data and code segments
- *
- * g3 is length of bss = (__bss_end-__bss_start)
- *
- */
-
-	/* clear bss area (the relocated) */
-clr_bss:
-	SPARC_LOAD_ADDRESS(__bss_start, l7, g2)
-	SPARC_LOAD_ADDRESS(__bss_end, l7, g3)
-	sub	%g3,%g2,%g3		! length of .bss area
-	add	%g3,%g4,%g3
-	/* clearing 16byte a time ==> linker script need to align to 16 byte offset */
-	clr	%g1	/* std %g0 uses g0 and g1 */
-20:
-	std	%g0, [%g4]
-	std	%g0, [%g4+8]
-	inc	16, %g4			! ptr += 16
-	cmp	%g4, %g3
-	bcs	20b			! while (ptr < end)
-	 nop
-
-	/* add offsets to GOT table */
-fixup_got:
-	SPARC_LOAD_ADDRESS(__got_start, l7, g4)
-	add	%g4, %g6, %g4
-	SPARC_LOAD_ADDRESS(__got_end, l7, g3)
-	add	%g3, %g6, %g3
-30:	ld	[%g4], %l0		! load old GOT-PTR
-#ifdef CONFIG_RELOC_GOT_SKIP_NULL
-	cmp	%l0, 0
-	be	32f
-#endif
-	add	%l0, %g6, %l0		! relocate GOT pointer
-	st	%l0, [%g4]
-32:	inc	4, %g4			! ptr += 4
-	cmp	%g4, %g3
-	bcs	30b			! while (ptr < end)
-	 nop
-
-prom_relocate:
-	SPARC_LOAD_ADDRESS(__prom_start, l7, g2)
-	SPARC_LOAD_ADDRESS(__prom_end, l7, g3)
-	/*
-	 * Calculated addres is stored in this variable by
-	 * reserve_prom() function in common/board_f.c
-	 */
-	SPARC_LOAD_ADDRESS(__prom_start_reloc, l7, g4)
-	ld	[%g4], %g4
-
-40:	ldd	[%g2], %l0
-	ldd	[%g2+8], %l2
-	std	%l0, [%g4]
-	std	%l2, [%g4+8]
-	inc	16, %g2
-	cmp	%g2, %g3
-	bcs	40b
-	 inc	16, %g4
-
-! %o0 = stack pointer (relocated)
-! %o1 = global data pointer (relocated)
-! %o2 = text pointer (relocated)
-
-! %g6 = relocation offset
-! %l7 = _GLOBAL_OFFSET_TABLE_
-
-/* Trap table has been moved, lets tell CPU about
- * the new trap table address
- */
-update_trap_table_address:
-	wr	%g0, %o2, %tbr
-	nop
-	nop
-	nop
-
-update_stack_pointers:
-	mov	%o0, %fp
-	andn	%fp, 0x0f, %fp	! align to 16 bytes
-	add	%fp, -64, %fp	! make space for a window push
-	mov	%fp, %sp	! setup stack pointer
-
-jump_board_init_r:
-	mov	%o1, %o0	! relocated global data pointer
-	mov	%o2, %o1	! relocated text pointer
-	SPARC_LOAD_ADDRESS(board_init_r, l7, o3)
-	add	%o3, %g6, %o3	! add relocation offset
-	call	%o3
-	 nop
-
-dead:	ta 0				! if call returns...
-	 nop
-
-!------------------------------------------------------------------------------
-
-/* Interrupt handler caller,
- * reg L7: interrupt number
- * reg L0: psr after interrupt
- * reg L1: PC
- * reg L2: next PC
- * reg L3: wim
- */
-_irq_entry:
-	SAVE_ALL
-
-	or	%l0, PSR_PIL, %g2
-	wr	%g2, 0x0, %psr
-	WRITE_PAUSE
-	wr	%g2, PSR_ET, %psr
-	WRITE_PAUSE
-	mov	%l7, %o0		! irq level
-	set	handler_irq, %o1
-	set	(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2
-	add	%o1, %o2, %o1
-	call	%o1
-	add	%sp, SF_REGS_SZ, %o1	! pt_regs ptr
-	or	%l0, PSR_PIL, %g2	! restore PIL after handler_irq
-	wr	%g2, PSR_ET, %psr	! keep ET up
-	WRITE_PAUSE
-
-	RESTORE_ALL
-
-!------------------------------------------------------------------------------
-
-/*
- * Window overflow trap handler.
- */
-	.global _window_overflow
-
-_window_overflow:
-
-	mov	%wim, %l3		! Calculate next WIM
-	mov	%g1, %l7
-	srl	%l3, 1, %g1
-	sll	%l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l4
-	or	%l4, %g1, %g1
-
-	save				! Get into window to be saved.
-	mov	%g1, %wim
-	nop; nop; nop
-	st	%l0, [%sp + 0];
-	st	%l1, [%sp + 4];
-	st	%l2, [%sp + 8];
-	st	%l3, [%sp + 12];
-	st	%l4, [%sp + 16];
-	st	%l5, [%sp + 20];
-	st	%l6, [%sp + 24];
-	st	%l7, [%sp + 28];
-	st	%i0, [%sp + 32];
-	st	%i1, [%sp + 36];
-	st	%i2, [%sp + 40];
-	st	%i3, [%sp + 44];
-	st	%i4, [%sp + 48];
-	st	%i5, [%sp + 52];
-	st	%i6, [%sp + 56];
-	st	%i7, [%sp + 60];
-	restore				! Go back to trap window.
-	mov	%l7, %g1
-	jmp	%l1			! Re-execute save.
-	rett	%l2
-
-/*
- * Window underflow trap handler.
- */
-	.global  _window_underflow
-
-_window_underflow:
-
-	mov  %wim, %l3			! Calculate next WIM
-	sll  %l3, 1, %l4
-	srl  %l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l5
-	or   %l5, %l4, %l5
-	mov  %l5, %wim
-	nop; nop; nop
-	restore				! Two restores to get into the
-	restore				! window to restore
-	ld	[%sp + 0], %l0;		! Restore window from the stack
-	ld	[%sp + 4], %l1;
-	ld	[%sp + 8], %l2;
-	ld	[%sp + 12], %l3;
-	ld	[%sp + 16], %l4;
-	ld	[%sp + 20], %l5;
-	ld	[%sp + 24], %l6;
-	ld	[%sp + 28], %l7;
-	ld	[%sp + 32], %i0;
-	ld	[%sp + 36], %i1;
-	ld	[%sp + 40], %i2;
-	ld	[%sp + 44], %i3;
-	ld	[%sp + 48], %i4;
-	ld	[%sp + 52], %i5;
-	ld	[%sp + 56], %i6;
-	ld	[%sp + 60], %i7;
-	save				! Get back to the trap window.
-	save
-	jmp	%l1			! Re-execute restore.
-	rett	%l2
-
-!------------------------------------------------------------------------------
-
-_nmi_trap:
-	nop
-	jmp %l1
-	rett %l2
-
-_hwerr:
-	ta 0
-	nop
-	nop
-	b _hwerr			! loop infinite
-	nop
-
-/* Registers to not touch at all. */
-#define t_psr      l0 /* Set by caller */
-#define t_pc       l1 /* Set by caller */
-#define t_npc      l2 /* Set by caller */
-#define t_wim      l3 /* Set by caller */
-#define t_twinmask l4 /* Set at beginning of this entry routine. */
-#define t_kstack   l5 /* Set right before pt_regs frame is built */
-#define t_retpc    l6 /* If you change this, change winmacro.h header file */
-#define t_systable l7 /* Never touch this, could be the syscall table ptr. */
-#define curptr     g6 /* Set after pt_regs frame is built */
-
-trap_setup:
-/* build a pt_regs trap frame. */
-	sub	%fp, (SF_REGS_SZ + PT_REGS_SZ), %t_kstack
-	PT_STORE_ALL(t_kstack, t_psr, t_pc, t_npc, g2)
-
-	/* See if we are in the trap window. */
-	mov	1, %t_twinmask
-	sll	%t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr)
-	andcc	%t_twinmask, %t_wim, %g0
-	beq	1f		! in trap window, clean up
-	nop
-
-	/*-------------------------------------------------
-	 * Spill , adjust %wim and go.
-	 */
-	srl	%t_wim, 0x1, %g2		! begin computation of new %wim
-
-	set	(CONFIG_SYS_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
-
-	sll	%t_wim, %g3, %t_wim	! NWINDOWS-1
-	or	%t_wim, %g2, %g2
-	and	%g2, 0xff, %g2
-
-	save	%g0, %g0, %g0		! get in window to be saved
-
-	/* Set new %wim value */
-	wr	%g2, 0x0, %wim
-
-	/* Save the kernel window onto the corresponding stack. */
-	RW_STORE(sp)
-
-	restore	%g0, %g0, %g0
-	/*-------------------------------------------------*/
-
-1:
-	/* Trap from kernel with a window available.
-	 * Just do it...
-	 */
-	jmpl	%t_retpc + 0x8, %g0	! return to caller
-	 mov	%t_kstack, %sp		! jump onto new stack
-
-#define twin_tmp1 l4
-#define glob_tmp  g4
-#define curptr    g6
-ret_trap_entry:
-	wr	%t_psr, 0x0, %psr       ! enable nesting again, clear ET
-
-	/* Will the rett land us in the invalid window? */
-	mov	2, %g1
-	sll	%g1, %t_psr, %g1
-
-	set	CONFIG_SYS_SPARC_NWINDOWS, %g2	!NWINDOWS
-
-	srl	%g1, %g2, %g2
-	or	%g1, %g2, %g1
-	rd	%wim, %g2
-	andcc	%g2, %g1, %g0
-	be	1f		! Nope, just return from the trap
-	 sll	%g2, 0x1, %g1
-
-	/* We have to grab a window before returning. */
-	set	(CONFIG_SYS_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
-
-	srl	%g2, %g3,  %g2
-	or	%g1, %g2, %g1
-	and	%g1, 0xff, %g1
-
-	wr	%g1, 0x0, %wim
-
-	/* Grrr, make sure we load from the right %sp... */
-	PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
-
-	restore	%g0, %g0, %g0
-	RW_LOAD(sp)
-	b	2f
-	save	%g0, %g0, %g0
-
-	/* Reload the entire frame in case this is from a
-	 * kernel system call or whatever...
-	 */
-1:
-	PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
-2:
-	wr	%t_psr, 0x0, %psr
-	nop;
-	nop;
-	nop
-
-	jmp	%t_pc
-	rett	%t_npc
-
-/* This is called from relocated C-code.
- * It resets the system by jumping to _start
- */
-_reset_reloc:
-	set	start, %l0
-	call	%l0
-	nop
diff --git a/arch/sparc/cpu/leon3/Makefile b/arch/sparc/cpu/leon3/Makefile
deleted file mode 100644
index f4cf43cfec32..000000000000
--- a/arch/sparc/cpu/leon3/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-extra-y	= start.o
-obj-y	= cpu_init.o serial.o cpu.o ambapp.o ambapp_low.o ambapp_low_c.o \
-	interrupts.o prom.o usb_uhci.o memcfg.o memcfg_low.o
diff --git a/arch/sparc/cpu/leon3/ambapp.c b/arch/sparc/cpu/leon3/ambapp.c
deleted file mode 100644
index 47769cffd70a..000000000000
--- a/arch/sparc/cpu/leon3/ambapp.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/* GRLIB AMBA Plug&Play information scanning, relies on assembler
- * routines.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <malloc.h>
-#include <ambapp.h>
-#include <config.h>
-
-/************ C INTERFACE OF ASSEMBLER SCAN ROUTINES ************/
-struct ambapp_find_apb_info {
-	/* Address of APB device Plug&Play information */
-	struct ambapp_pnp_apb	*pnp;
-	/* AHB Bus index of where the APB-Master Bridge device was found */
-	int			ahb_bus_index;
-	int			dec_index;
-};
-
-struct ambapp_find_ahb_info {
-	/* Address of AHB device Plug&Play information */
-	struct ambapp_pnp_ahb	*pnp;
-	/* AHB Bus index of where the AHB device was found */
-	int			ahb_bus_index;
-	int			dec_index;
-};
-
-extern void ambapp_find_buses(unsigned int ioarea, struct ambapp_bus *abus);
-
-extern int ambapp_find_apb(struct ambapp_bus *abus, unsigned int dev_vend,
-	int index, struct ambapp_find_apb_info *result);
-
-extern int ambapp_find_ahb(struct ambapp_bus *abus, unsigned int dev_vend,
-	int index, int type, struct ambapp_find_ahb_info *result);
-
-/************ C ROUTINES USED BY U-BOOT AMBA CORE DRIVERS ************/
-struct ambapp_bus ambapp_plb __section(.data);
-
-void ambapp_bus_init(
-	unsigned int ioarea,
-	unsigned int freq,
-	struct ambapp_bus *abus)
-{
-	int i;
-
-	ambapp_find_buses(ioarea, abus);
-	for (i = 0; i < 6; i++)
-		if (abus->ioareas[i] == 0)
-			break;
-	abus->buses = i;
-	abus->freq = freq;
-}
-
-/* Parse APB PnP Information */
-void ambapp_apb_parse(struct ambapp_find_apb_info *info, ambapp_apbdev *dev)
-{
-	struct ambapp_pnp_apb *apb = info->pnp;
-	unsigned int apbbase = (unsigned int)apb & 0xfff00000;
-
-	dev->vendor = amba_vendor(apb->id);
-	dev->device = amba_device(apb->id);
-	dev->irq = amba_irq(apb->id);
-	dev->ver = amba_ver(apb->id);
-	dev->address = (apbbase | (((apb->iobar & 0xfff00000) >> 12))) &
-			(((apb->iobar &	0x0000fff0) << 4) | 0xfff00000);
-	dev->mask = amba_apb_mask(apb->iobar);
-	dev->ahb_bus_index = info->ahb_bus_index - 1;
-}
-
-/* Parse AHB PnP information */
-void ambapp_ahb_parse(struct ambapp_find_ahb_info *info, ambapp_ahbdev *dev)
-{
-	struct ambapp_pnp_ahb *ahb = info->pnp;
-	unsigned int ahbbase = (unsigned int)ahb & 0xfff00000;
-	int i, type;
-	unsigned int addr, mask, mbar;
-
-	dev->vendor = amba_vendor(ahb->id);
-	dev->device = amba_device(ahb->id);
-	dev->irq = amba_irq(ahb->id);
-	dev->ver = amba_ver(ahb->id);
-	dev->userdef[0] = ahb->custom[0];
-	dev->userdef[1] = ahb->custom[1];
-	dev->userdef[2] = ahb->custom[2];
-	dev->ahb_bus_index = info->ahb_bus_index - 1;
-	for (i = 0; i < 4; i++) {
-		mbar = ahb->mbar[i];
-		addr = amba_membar_start(mbar);
-		type = amba_membar_type(mbar);
-		if (type == AMBA_TYPE_AHBIO) {
-			addr = amba_ahbio_adr(addr, ahbbase);
-			mask = (((unsigned int)
-				(amba_membar_mask((~mbar))<<8)|0xff))+1;
-		} else {
-			/* AHB memory area, absolute address */
-			mask = (~((unsigned int)
-				(amba_membar_mask(mbar)<<20)))+1;
-		}
-		dev->address[i] = addr;
-		dev->mask[i] = mask;
-		dev->type[i] = type;
-	}
-}
-
-int ambapp_apb_find(struct ambapp_bus *abus, int vendor, int device,
-	int index, ambapp_apbdev *dev)
-{
-	unsigned int devid = AMBA_PNP_ID(vendor, device);
-	int found;
-	struct ambapp_find_apb_info apbdev;
-
-	found = ambapp_find_apb(abus, devid, index, &apbdev);
-	if (found == 1)
-		ambapp_apb_parse(&apbdev, dev);
-
-	return found;
-}
-
-int ambapp_apb_count(struct ambapp_bus *abus, int vendor, int device)
-{
-	unsigned int devid = AMBA_PNP_ID(vendor, device);
-	int found;
-	struct ambapp_find_apb_info apbdev;
-
-	found = ambapp_find_apb(abus, devid, 63, &apbdev);
-	if (found == 1)
-		return 64;
-	else
-		return 63 - apbdev.dec_index;
-}
-
-int ambapp_ahb_find(struct ambapp_bus *abus, int vendor, int device,
-	int index, ambapp_ahbdev *dev, int type)
-{
-	int found;
-	struct ambapp_find_ahb_info ahbdev;
-	unsigned int devid = AMBA_PNP_ID(vendor, device);
-
-	found = ambapp_find_ahb(abus, devid, index, type, &ahbdev);
-	if (found == 1)
-		ambapp_ahb_parse(&ahbdev, dev);
-
-	return found;
-}
-
-int ambapp_ahbmst_find(struct ambapp_bus *abus, int vendor, int device,
-	int index, ambapp_ahbdev *dev)
-{
-	return ambapp_ahb_find(abus, vendor, device, index, dev, DEV_AHB_MST);
-}
-
-int ambapp_ahbslv_find(struct ambapp_bus *abus, int vendor, int device,
-	int index, ambapp_ahbdev *dev)
-{
-	return ambapp_ahb_find(abus, vendor, device, index, dev, DEV_AHB_SLV);
-}
-
-int ambapp_ahb_count(struct ambapp_bus *abus, int vendor, int device, int type)
-{
-	int found;
-	struct ambapp_find_ahb_info ahbdev;
-	unsigned int devid = AMBA_PNP_ID(vendor, device);
-
-	found = ambapp_find_ahb(abus, devid, 63, type, &ahbdev);
-	if (found == 1)
-		return 64;
-	else
-		return 63 - ahbdev.dec_index;
-}
-
-int ambapp_ahbmst_count(struct ambapp_bus *abus, int vendor, int device)
-{
-	return ambapp_ahb_count(abus, vendor, device, DEV_AHB_MST);
-}
-
-int ambapp_ahbslv_count(struct ambapp_bus *abus, int vendor, int device)
-{
-	return ambapp_ahb_count(abus, vendor, device, DEV_AHB_SLV);
-}
-
-/* The define CONFIG_SYS_GRLIB_SINGLE_BUS may be defined on GRLIB systems
- * where only one AHB Bus is available - no bridges are present. This option
- * is available only to reduce the footprint.
- *
- * Defining this on a multi-bus GRLIB system may also work depending on the
- * design.
- */
-
-#ifndef CONFIG_SYS_GRLIB_SINGLE_BUS
-
-/* GAISLER AHB2AHB Version 1 Bridge Definitions */
-#define AHB2AHB_V1_FLAG_FFACT     0x0f0	/* Frequency factor against top bus */
-#define AHB2AHB_V1_FLAG_FFACT_DIR 0x100	/* Factor direction, 0=down, 1=up */
-#define AHB2AHB_V1_FLAG_MBUS      0x00c	/* Master bus number mask */
-#define AHB2AHB_V1_FLAG_SBUS      0x003	/* Slave bus number mask */
-
-/* Get Parent bus frequency. Note that since we go from a "child" bus
- * to a parent bus, the frequency factor direction is inverted.
- */
-unsigned int gaisler_ahb2ahb_v1_freq(ambapp_ahbdev *ahb, unsigned int freq)
-{
-	int dir;
-	unsigned char ffact;
-
-	/* Get division/multiple factor */
-	ffact = (ahb->userdef[0] & AHB2AHB_V1_FLAG_FFACT) >> 4;
-	if (ffact != 0) {
-		dir = ahb->userdef[0] & AHB2AHB_V1_FLAG_FFACT_DIR;
-
-		/* Calculate frequency by dividing or
-		 * multiplying system frequency
-		 */
-		if (dir)
-			freq = freq * ffact;
-		else
-			freq = freq / ffact;
-	}
-
-	return freq;
-}
-
-/* AHB2AHB and L2CACHE ver 2 is not supported yet. */
-unsigned int gaisler_ahb2ahb_v2_freq(ambapp_ahbdev *ahb, unsigned int freq)
-{
-	panic("gaisler_ahb2ahb_v2_freq: AHB2AHB ver 2 not supported\n");
-	return -1;
-}
-#endif
-
-/* Return the frequency of a AHB bus identified by index found
- * note that this is not the AHB Bus number.
- */
-unsigned int ambapp_bus_freq(struct ambapp_bus *abus, int ahb_bus_index)
-{
-	unsigned int freq = abus->freq;
-#ifndef CONFIG_SYS_GRLIB_SINGLE_BUS
-	unsigned int ioarea, ioarea_parent, bridge_pnp_ofs;
-	struct ambapp_find_ahb_info ahbinfo;
-	ambapp_ahbdev ahb;
-	int parent;
-
-	debug("ambapp_bus_freq: get freq on bus %d\n", ahb_bus_index);
-
-	while (ahb_bus_index != 0) {
-		debug("  BUS[0]: 0x%08x\n", abus->ioareas[0]);
-		debug("  BUS[1]: 0x%08x\n", abus->ioareas[1]);
-		debug("  BUS[2]: 0x%08x\n", abus->ioareas[2]);
-		debug("  BUS[3]: 0x%08x\n", abus->ioareas[3]);
-		debug("  BUS[4]: 0x%08x\n", abus->ioareas[4]);
-		debug("  BUS[5]: 0x%08x\n", abus->ioareas[5]);
-
-		/* Get I/O area of AHB bus */
-		ioarea = abus->ioareas[ahb_bus_index];
-
-		debug("  IOAREA: 0x%08x\n", ioarea);
-
-		/* Get parent bus */
-		parent = (ioarea & 0x7);
-		if (parent == 0) {
-			panic("%s: parent=0 indicates no parent! Stopping.\n",
-				__func__);
-			return -1;
-		}
-		parent = parent - 1;
-		bridge_pnp_ofs = ioarea & 0x7e0;
-
-		debug("  PARENT: %d\n", parent);
-		debug("  BRIDGE_OFS: 0x%08x\n", bridge_pnp_ofs);
-
-		/* Get AHB/AHB bridge PnP address */
-		ioarea_parent = (abus->ioareas[parent] & 0xfff00000) |
-				AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA;
-		ahbinfo.pnp = (struct ambapp_pnp_ahb *)
-				(ioarea_parent | bridge_pnp_ofs);
-
-		debug("  IOAREA PARENT: 0x%08x\n", ioarea_parent);
-		debug("  BRIDGE PNP: 0x%p\n", ahbinfo.pnp);
-
-		/* Parse the AHB information */
-		ahbinfo.ahb_bus_index = parent;
-		ambapp_ahb_parse(&ahbinfo, &ahb);
-
-		debug("  BRIDGE ID: VENDOR=%d(0x%x), DEVICE=%d(0x%x)\n",
-			ahb.vendor, ahb.vendor, ahb.device, ahb.device);
-
-		/* Different bridges may convert frequency differently */
-		if ((ahb.vendor == VENDOR_GAISLER) &&
-			((ahb.device == GAISLER_AHB2AHB) ||
-			(ahb.device == GAISLER_L2CACHE))) {
-			/* Get new frequency */
-			if (ahb.ver > 1)
-				freq = gaisler_ahb2ahb_v2_freq(&ahb, freq);
-			else
-				freq = gaisler_ahb2ahb_v1_freq(&ahb, freq);
-
-			debug("  NEW FREQ: %dHz\n", freq);
-		} else {
-			panic("%s: unsupported AMBA bridge\n", __func__);
-			return -1;
-		}
-
-		/* Step upwards towards system top bus */
-		ahb_bus_index = parent;
-	}
-#endif
-
-	debug("ambapp_bus_freq: %dHz\n", freq);
-
-	return freq;
-}
diff --git a/arch/sparc/cpu/leon3/ambapp_low.S b/arch/sparc/cpu/leon3/ambapp_low.S
deleted file mode 100644
index 2863586dc1b9..000000000000
--- a/arch/sparc/cpu/leon3/ambapp_low.S
+++ /dev/null
@@ -1,784 +0,0 @@
-/* GRLIB AMBA Plug&Play information scanning implemented without
- * using memory (stack) and one register window. The code scan
- * the PnP info and inserts the AHB bridges/buses into register
- * i0-i5.
- * The code support
- *  - up to 6 AHB buses
- *  - multiple APB buses
- *  - support for AHB2AHB & L2CACHE bridges
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ambapp.h>
-
-	.seg	"text"
-	.globl	_nomem_amba_init
-	.globl	_nomem_ambapp_find_buses
-	.globl	_nomem_find_apb
-	.globl	_nomem_find_ahb
-
-/* Overview
- * ========
- *
- * _nomem_amba_init         - Init AMBA bus and calls _nomem_ambapp_find_buses
- * _nomem_ambapp_find_buses - Scan AMBA PnP info for AHB buses/bridges and
- *                            place them in i0-i5, see below
- * _nomem_find_apb          - Find one APB device identified by VENDOR:DEVICE
- *                            ID and an index.
- * _nomem_find_ahb          - Find one AHB Master or Slave device identified
- *                            by VENDOR:DEVICE ID and an index.
- * init_ahb_bridges         - Local function. Clears i0-i5
- * insert_ahb_bridge        - Local function. Insert a new AHB bus into first
- *                            free register in i0-i5. It also checks that the
- *                            bus has not already been added.
- * get_ahb_bridge           - Local function. Get AHB bus from registers,
- *                            return register iN, where N is defined by o0.
- *
- * The _nomem_find_apb and _nomem_find_ahb function requires that i0-i5
- * are populated with the AHB buses of the system. The registers are
- * initialized by _nomem_ambapp_find_buses.
- *
- * AHB Bus result and requirements of i0-i5
- * ========================================
- *
- * i0: AHB BUS0 IOAREA, no parent bus
- * i1: AHB BUS1 IOAREA, parent bus is always i0 (AHB BUS0) and bridge address
- * i2: AHB BUS2 IOAREA, 3-bit parent bus number and bridge address
- * i3: AHB BUS3 IOAREA, 3-bit parent bus number and bridge address
- * i4: AHB BUS4 IOAREA, 3-bit parent bus number and bridge address
- * i5: AHB BUS5 IOAREA, 3-bit parent bus number and bridge address
- *
- * AHB BUS
- * -------
- * Bits 31-20 (0xfff00000) contain the found bus I/O Area (AHB PnP area).
- *
- * 3-bit Parent bus
- * ----------------
- * Bits 2-0 (0x00000007) contain parent bus number. Zero if no parent
- * bus, 1 = parent is AHB BUS 0 (i0), 2 = parent is AHB BUS 1 (i1)..
- *
- * Bridge Address
- * --------------
- * Bits 10-5 (0x000007e0) contain the index of the Bridge's PnP
- * information on the parent. Since all bridges are found in the
- * PnP information they all have a PnP entry. Together with the
- * parent bus number the PnP entry can be found:
- *  PnPEntry = (BRIDGE_ADDRESS + (iN & 0xfff00000)) | 0x000ff800
- *  where N is the parent bus minus one.
- *
- */
-
-/* Function initializes the AHB Bridge I/O AREA storage. (Clears i0-i5)
- *
- * Arguments
- *  none
- *
- * Results
- *  none
- *
- * Clobbered
- *  none
- */
-
-init_ahb_bridges:
-	mov	%g0, %i0
-	mov	%g0, %i1
-	mov	%g0, %i2
-	mov	%g0, %i3
-	mov	%g0, %i4
-	retl
-	 mov	%g0, %i5
-
-/* Function returns AHB Bridge I/O AREA for specified bus.
- *
- * Arguments
- *  - o0 = bus number
- *
- * Results
- *  - o0 = I/O AREA
- *
- * Clobbered
- *  none
- */
-get_ahb_bridge:
-	cmp	%o0, 1
-	be,a	L1
-	 mov	%i0, %o0
-
-	cmp	%o0, 2
-	be,a	L1
-	 mov	%i1, %o0
-
-	cmp	%o0, 3
-	be,a	L1
-	 mov	%i2, %o0
-
-	cmp	%o0, 4
-	be,a	L1
-	 mov	%i3, %o0
-
-	cmp	%o0, 5
-	be,a	L1
-	 mov	%i4, %o0
-
-	cmp	%o0, 6
-	be,a	L1
-	 mov	%i5, %o0
-
-	/* o0 > 6: only 6 buses supported */
-	mov	%g0, %o0
-L1:
-	retl
-	 nop
-
-/* Function adds a AHB Bridge I/O AREA to the i0-i5 registers if
- * not already added. It stores the bus PnP start information.
- *
- * Arguments
- *  - o0 = AHB Bridge I/O area
- *
- * Results
- *  none
- *
- * Clobbered
- *  o2, o3
- */
-insert_ahb_bridge:
-	/* Check that bridge hasn't already been added */
-	andn	%o0, 0x7ff, %o2
-	andn	%i0, 0x7ff, %o3
-	cmp	%o3, %o2
-	be	L2
-	 andn	%i1, 0x7ff, %o3
-	cmp	%o3, %o2
-	be	L2
-	 andn	%i2, 0x7ff, %o3
-	cmp	%o3, %o2
-	be	L2
-	 andn	%i3, 0x7ff, %o3
-	cmp	%o3, %o2
-	be	L2
-	 andn	%i4, 0x7ff, %o3
-	cmp	%o3, %o2
-	be	L2
-	 andn	%i5, 0x7ff, %o3
-	cmp	%o3, %o2
-	be	L2
-
-	/* Insert into first free posistion */
-	 cmp	%i0, %g0
-	be,a	L2
-	 mov	%o0, %i0
-
-	cmp	%i1, %g0
-	be,a	L2
-	 mov	%o0, %i1
-
-	cmp	%i2, %g0
-	be,a	L2
-	 mov	%o0, %i2
-
-	cmp	%i3, %g0
-	be,a	L2
-	 mov	%o0, %i3
-
-	cmp	%i4, %g0
-	be,a	L2
-	 mov	%o0, %i4
-
-	cmp	%i5, %g0
-	be,a	L2
-	 mov	%o0, %i5
-L2:
-	retl
-	 nop
-
-/* FUNCTION int _nomem_find_ahb_bus(
- *	unsigned int bridge,
- *	int vendor_device,
- *	int index,
- *	void **pconf,
- *	int not_used,
- *	int option
- *	)
- *
- * Scans the AHB Master or Slave area for a matching VENDOR:DEVICE, the
- * index is decremented when a matching device is found but index is
- * greater than zero. When index is zero and a matching DEVICE:VENDOR
- * is found the AHB configuration address and AHB I/O area is returned.
- *
- * i0-i7,l0,l1,l2,l3,l4,g2,o6 is not available for use.
- * o1,o5 Must be left untouched
- *
- * Results
- *  - o0 Number of found devices (1 or 0)
- *  - o2 is decremented for each matching VENDOR:DEVICE found, zero if found
- *  - o3 Address of the AHB PnP configuration entry (Only valid if o0=1)
- *
- * Clobbered
- *  - o3 (Clobbered when no device was found)
- *  - o4 (Number of Devices left to search)
- *  - o0 (Bus ID, PnP ID, Device)
- */
-_nomem_find_ahb_bus:
-
-	/* Get the number of Slaves/Masters.
-	 * Only AHB Bus 0 has 64 AHB Masters/Slaves the
-	 * other AHB buses has 16 slaves and 16 masters.
-	 */
-	add	%g0, 16, %o4		/* Defaulting to 16 */
-	andcc	%o0, 0x7, %g0		/* 3-bit bus id */
-	be,a	.L_maxloops_detected
-	 add	%g0, 64, %o4		/* AHB Bus 0 has 64 AHB Masters/Slaves */
-.L_maxloops_detected:
-
-	/* Get start address of AHB Slave or AHB Master area depending on what
-	 * we are searching for.
-	 */
-	andn	%o0, 0x7ff, %o0		/* Remove Bus ID and 5-bit AHB/AHB
-					 * Bridge PnP Address to get I/O Area */
-	set	AMBA_CONF_AREA,	%o3
-	or	%o3, %o0, %o3		/* Master area address */
-
-	cmp	%o5, DEV_AHB_SLV
-	be,a	.L_conf_area_calculated
-	 or	%o3, AMBA_AHB_SLAVE_CONF_AREA, %o3	/* Add 0x800 to get to slave area */
-.L_conf_area_calculated:
-
-	/* Iterate over all AHB device and try to find matching DEVICE:VENDOR
-	 * o1 - VENDOR|DEVICE
-	 * o2 - Index
-	 * o3 - Current AHB Device Configuration address
-	 * o5 - Type (leave untouched)
-	 *
-	 * o4 - Number of AHB device left to process
-	 * o0 - tmp
-	 */
-.L_process_one_conf:
-	ld	[%o3], %o0
-	andn	%o0, 0xfff, %o0
-	cmp	%o0, 0			/* No device if zero */
-	beq	.L_next_conf
-	 cmp	%o1, 0			/* If VENDOR:DEVICE==0, consider all matching */
-	beq	.L_process_ahb_dev_found
-	 cmp	%o0, %o1		/* Does VENDOR and DEVICE Match? */
-	bne	.L_next_conf
-	 nop
-.L_process_ahb_dev_found:
-	/* Found a Matching VENDOR:DEVICE, index must also match */
-	cmp	%o2, %g0
-	bne	.L_next_conf
-	 dec	%o2
-	/* Index matches also, return happy with o3 set to AHB Conf Address */
-	mov	%g0, %o2
-	retl
-	 add	%g0, 1, %o0
-
-.L_next_conf:
-	subcc	%o4, 1, %o4		/* One device has been processed,
-					 * Are there more devices to process? */
-	bne	.L_process_one_conf
-	 add	%o3, AMBA_AHB_CONF_LENGH, %o3	/* Next Configuration entry */
-	/* No Matching device found */
-	retl
-	 mov	%g0, %o0
-
-/* FUNCTION int _nomem_find_ahb(
- *      int unused,
- *	int vendor_device,
- *	int index,
- *	void **pconf,
- *	int *ahb_bus_index,
- *	int option,
- *	)
- *
- * Find a AHB Master or AHB Slave device, it puts the address of the AHB PnP
- * configuration in o3 (pconf), the I/O Area base address in o4 (pioarea).
- *
- * Calls _nomem_find_ahb_bus for every AHB bus.
- *
- * i0-i7, l0, l1, o6, g1, g4-g7 is not available for use.
- *
- * Arguments
- *  - o0 Unused
- *
- * Results
- *  - o0 Number of found devices (1 or 0)
- *  - o2 Decremented Index (Zero if found)
- *  - o3 Address of the AHB PnP configuration entry
- *  - o4 AHB Bus index the device was found on (if o0=1)
- *  - o5 Left untouched
- *
- * Clobbered
- *  - o0 (AHB Bridge and used by _nomem_find_ahb_bus)
- *  - o2 (index is decremented)
- *  - l2 (Current AHB Bus index)
- *  - g2 (return address)
- */
-_nomem_find_ahb:
-	mov	%o7, %g2		/* Save return address */
-	/* Scan all AHB Buses found for the AHB Master/Slave matching VENDOR:DEVICE */
-	clr	%l2
-.L_search_next_ahb_bus:
-	add	%l2, 1, %l2
-	call	get_ahb_bridge			/* Get bus %l0 I/O Area */
-	 mov	%l2, %o0
-	cmp	%o0, %g0
-	be	.L_no_device_found		/* If no more AHB bus is left to be scanned, proceed */
-	 nop
-	call	_nomem_find_ahb_bus		/* Scan AHB bus %o0 for VENDOR:DEVICE. Index in o3 is decremented  */
-	 nop
-	cmp	%o0, %g0			/* If VENDOR:DEVICE was not found scan next AHB Bus */
-	be	.L_search_next_ahb_bus		/* Do next bus is o0=0 (not found) */
-	 nop
-	/* The device was found, o0 is 1 */
-	mov	%g2, %o7		/* Restore return address */
-	retl
-	 mov	%l2, %o4		/* The AHB bus index the device was found on */
-
-	/* No device found matching */
-.L_no_device_found:
-	mov	%g2, %o7		/* Restore return address */
-	retl
-	 mov	%g0, %o0
-
-
-/* FUNCTION int _nomem_find_apb_bus(
- *      int apbmst,
- *	int vendor_device,
- *	int index,
- *	void **pconf
- *	)
- *
- * Find a APB Slave device, it puts the address of the APB PnP configuration
- * in o3 (pconf).
- *
- * Calls _nomem_find_ahb_bus for every AHB bus searching for AHB/APB Bridges.
- * The AHB/APB bridges are AHB Slaves with ID GAISLER_APBMST.
- *
- * Results
- *  - o0 Number of found devices (1 or 0)
- *  - o2 Decremented Index
- *  - o3 Address of the found APB device PnP configuration entry
- *
- * Clobbered
- *  - o5 PnP VENDOR:DEVICE ID
- */
-
-_nomem_find_apb_bus:
-	set	AMBA_CONF_AREA, %o3
-	or	%o0, %o3, %o3		/* Calc start of APB device PnP info */
-	add	%g0, 16, %o0		/* o0, number of APB Slaves left to scan */
-.L_process_one_apb_conf:
-	ld	[%o3], %o5
-	andn	%o5, 0xfff, %o5
-	cmp	%o5, 0			/* No device if zero */
-	beq	.L_process_apb_dev_not_found
-	 cmp	%o1, 0			/* If VENDOR:DEVICE == -1, consider all matching */
-	beq	.L_process_apb_dev_found
-	 cmp	%o1, %o5		/* Found VENDOR:DEVICE */
-	bne	.L_process_apb_dev_not_found
-	 nop
-
-.L_process_apb_dev_found:
-	/* Found matching device, compare index */
-	cmp	%o2, %g0
-	bne	.L_process_apb_dev_not_found
-	 dec	%o2
-	/* Matching index and VENDOR:DEVICE */
-	retl
-	 add	%g0, 1, %o0
-
-.L_process_apb_dev_not_found:
-	subcc	%o0, 1, %o0
-	bne	.L_process_one_apb_conf
-	 add	%o3, 8, %o3
-	retl
-	 mov	%g0, %o0
-
-/* FUNCTION int _nomem_find_apb(
- *      int unused,
- *	int vendor_device,
- *	int index,
- *	void **pconf,
- *	int *ahb_bus_index
- *	)
- *
- * Find a APB Slave device, it puts the address of the APB PnP configuration
- * in o3 (pconf), the APB Master I/O Area base address in o4 (papbarea).
- *
- * Calls _nomem_find_ahb_bus for every AHB bus searching for AHB/APB Bridges.
- * The AHB/APB bridges are AHB Slaves with ID GAISLER_APBMST.
- *
- * i0-i7, l0, l1, o6 is not available for use.
- *
- * Arguments
- *  - o0 Unused
- *
- * Results
- *  - o0 Number of found devices (1 or 0)
- *  - o2 Decremented Index if not found
- *  - o3 Address of the APB PnP configuration entry
- *  - o4 AHB Bus index of APB Bridge/APB Device
- *
- * Clobbered
- *  - o0 (AHB Bridge)
- *  - o2 (index is decremented)
- *  - l2 (APB DEV Index [7..4] : APBMST AHB Index [3..0])
- *  - l3 (Current AHB Bus index)
- *  - l4 (temporary storage for APB VENDOR:DEVICE)
- *  - o5 (AHB Slave ID)
- *  - o0 (clobbered by _nomem_find_ahb_bus)
- *  - g2 (Return address)
- */
-_nomem_find_apb:
-	/* Scan all AHB Buses found for AHB/APB Bridges */
-	mov	%o7, %g2		/* Save return address */
-	mov	%o1, %l4		/* Save APB VENDOR:DEVICE */
-	sll	%o2, 4, %l2		/* APB MST index = 0 */
-	add	%g0, 1, %l3		/* AHB Bus index = 0 */
-.L2_search_next_ahb_bus:
-	call	get_ahb_bridge		/* Get bus %l3 I/O Area */
-	 mov	%l3, %o0
-	cmp	%o0, %g0
-	be	.L2_no_device_found	/* If no more AHB bus is left to be scanned, proceed */
-	 add	%g0, DEV_AHB_SLV, %o5	/* Search for AHB Slave */
-	sethi	%hi(AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_APBMST)), %o1
-	call	_nomem_find_ahb_bus	/* Scan AHB bus %o0 for VENDOR:DEVICE. Index in o3 is decremented */
-	 and	%l2, 0xf, %o2		/* Set APBMST index */
-	cmp	%o0, %g0		/* If no AHB/APB Bridge was not found, scan next AHB Bus */
-	be	.L_no_apb_bridge_found	/* Do next bus */
-	 nop
-
-	/* The AHB/APB Bridge was found.
-         * Search for the requested APB Device on the APB bus using
-	 * find_apb_bus, it will decrement the index.
-         */
-	ld	[%o3 + AMBA_AHB_MBAR0_OFS], %o3
-	sll	%o3, 16, %o0
-	and	%o0, %o3, %o0		/* Address AND Address Mask */
-	sethi	%hi(0xfff00000), %o3
-	and	%o0, %o3, %o0		/* AHB/APB Bridge address */
-
-	srl	%l2, 4, %o2		/* APB DEV Index */
-	call	_nomem_find_apb_bus
-	 mov	%l4, %o1		/* APB VENDOR:DEVICE */
-	cmp	%o0, %g0
-	be	.L_apb_dev_not_found
-	 mov	%g2, %o7		/* Restore return address */
-	/* APB Device found
-	 * o0 1
-	 * o2 Index is decremented to zero
-	 * o3 APB configuration address,
-	 * o4 APB Bridge Configuration address.
-	 */
-	mov	%g0, %o2
-	retl
-	 mov	%l3, %o4
-
-.L_apb_dev_not_found:
-	/* Update APB DEV Index by saving output from find_apb_bus
-	 * (index parameter) into bits [31..4] in L2.
-	 */
-	sll	%o2, 4, %o2
-	and	%l2, 0xf, %l2
-	or	%o2, %l2, %l2
-	/* Try finding the next AHB/APB Bridge on the same AHB bus
-	 * to find more APB devices
-	 */
-	ba	.L2_search_next_ahb_bus	/* Find next AHB/APB bridge */
-	 inc	%l2
-
-.L_no_apb_bridge_found:
-	inc	%l3			/* Next AHB Bus */
-	ba	.L2_search_next_ahb_bus	/* Process next AHB bus */
-	 andn	%l2, 0xf, %l2		/* Start at APB Bridge index 0 at every AHB Bus */
-	/* No device found matching */
-.L2_no_device_found:
-	mov	%g2, %o7		/* Restore return address */
-	srl	%l2, 4, %o2		/* APB DEV Index */
-	retl
-	 mov	%g0, %o0
-
-
-
-/* FUNCTION _nomem_amba_scan_gaisler_ahb2ahb_bridge(unsigned int bridge, int bus)
- *
- * Constraints:
- *   - o1 may not be used
- *   - o0, o2, o3 may be used.
- *
- * Arguments
- *  - o0 PnP Address of Bridge AHB device
- *  - o2 PnP ID of AHB device
- *
- * Results
- *  - o0 Address of new bus PnP area or a 1 if AHB device is no bridge
- *
- * Clobbered
- *   - o0, o2
- *
- */
-_nomem_amba_scan_gaisler_ahb2ahb_bridge:
-	andn	%o2, 0xfff, %o2
-	sethi	%hi(AMBA_PNP_ID(VENDOR_GAISLER,GAISLER_AHB2AHB)), %o3
-	cmp	%o2, %o3
-	beq	.L_is_ahb2ahb_bridge
-	 nop
-
-	retl
-	 add	%g0, 1, %o0
-
-.L_is_ahb2ahb_bridge:
-	/* Found a GAISLER AHB2AHB bridge */
-	retl
-	 ld	[%o0 + AMBA_AHB_CUSTOM1_OFS], %o0 /* Get address of bridge PnP area */
-
-
-/* FUNCTION _nomem_amba_scan_gaisler_l2cache_bridge(unsigned int bridge, int bus)
- *
- * Constraints:
- *   - o1 may not be used
- *   - o0, o2, o3 may be used.
- *
- * Arguments
- *  - o0 PnP Address of Bridge AHB device
- *  - o2 PnP ID of AHB device
- *
- * Results
- *  - o0 Address of new bus PnP area or a 1 if AHB device is no bridge
- *
- * Clobbered
- *   - o0, o2
- *
- */
-_nomem_amba_scan_gaisler_l2cache_bridge:
-	andn	%o2, 0xfff, %o2
-	sethi	%hi(AMBA_PNP_ID(VENDOR_GAISLER,GAISLER_L2CACHE)), %o3
-	cmp	%o2, %o3
-	beq	.L_is_l2cache_bridge
-	 nop
-
-	retl
-	 add	%g0, 1, %o0
-
-.L_is_l2cache_bridge:
-	/* Found a GAISLER l2cache bridge */
-	retl
-	 ld	[%o0 + AMBA_AHB_CUSTOM1_OFS], %o0 /* Get address of bridge PnP area */
-
-
-/* FUNCTION _nomem_amba_scan(unsigned int bridge, int bus)
- *
- * Constraints:
- *  i0-i7, l0 is used by caller
- *  o5-o7 may not be used.
- *
- * Arguments
- *  - o0 Bridge Information: I/O AREA and parent bus
- *  - o1 Bus
- *
- * Results
- *  - o0 Number of AHB bridges found
- *
- * Clobbered
- *  - o0 (Current AHB slave conf address)
- *  - o2 (Used by insert_bridge)
- *  - o3 (Used by insert_bridge)
- *  - l1 (Number of AHB Slaves left to process)
- *  - l2 (Current AHB slave conf address)
- *  - g2 (Return address)
- */
-_nomem_amba_scan:
-	mov	%o7, %g2	/* Save return address */
-	set	16, %l1
-	cmp	%o1, 1
-	be,a	.L2_maxloops_detected
-	 add	%g0, 64, %l1
-.L2_maxloops_detected:
-
-	/* Clear 3-bit parent bus from bridge to get I/O AREA, then or
-	 * (AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA) to get first AHB slave
-	 * conf address.
-	 */
-	andn	%o0, 0x7ff, %o0
-	set	(AMBA_CONF_AREA | AMBA_AHB_SLAVE_CONF_AREA), %l2
-	or	%o0, %l2, %l2
-
-	/* Scan AHB Slave area for AHB<->AHB bridges. For each AHB device
-	 * all "bridge drivers" are called, the driver function interface:
-	 *
-	 * Input:
-	 *   - o0 PnP Address of Bridge AHB device
-	 *   - o2 PnP ID of AHB device
-	 * Return values:
-	 *   - o0 Address of new bus PnP area, returning a 1 in o2 means not found
-	 *
-	 * Constraints:
-	 *   - o1 may not be used
-	 *   - o0, o2, o3 may be used.
-	 *
-	 */
-.L_scan_one_ahb_slave:
-	ld	[%l2], %o2
-
-	cmp	%o2, %g0
-	beq	.L_scan_next_ahb_slave
-	 nop
-
-	/* Call the GAISLER AHB2AHB bridge driver */
-	call	_nomem_amba_scan_gaisler_ahb2ahb_bridge
-	 mov	%l2, %o0
-	cmp	%o0, 1
-	bne	.L_found_bridge
-	 ld	[%l2], %o2
-
-	/* Call the GAISLER L2CACHE bridge driver */
-	call	_nomem_amba_scan_gaisler_l2cache_bridge
-	 mov	%l2, %o0
-	cmp	%o0, 1
-	bne	.L_found_bridge
-	 ld	[%l2], %o2
-
-	/* Insert next bridge "driver" function here */
-
-
-	/* The PnP ID did not match a bridge - a new bus was not found ==>
-	 * step to next AHB device */
-	ba	.L_scan_next_ahb_slave
-	 nop
-
-	/* Add Found bus */
-.L_found_bridge:
-	and	%l2, 0x7e0, %o2
-	or	%o2, %o0, %o0		/* Add AHB/AHB Bridge PnP address */
-	call	insert_ahb_bridge	/* Insert Bridge into found buses storage */
-	 or	%o1, %o0, %o0		/* Add parent bus LSB 3-bits */
-
-.L_scan_next_ahb_slave:
-	/* More Slaves to process? */
-	subcc	%l1, 1, %l1
-	bne	.L_scan_one_ahb_slave
-	 add	%l2, AMBA_AHB_CONF_LENGH, %l2
-
-	/* No more AHB devices to process */
-	mov	%g2, %o7	/* Restore return address */
-	retl
-	 nop
-
-/* FUNCTION _nomem_ambapp_find_buses(unsigned int ioarea)
- *
- * Find AMBA AHB buses.
- *
- * Constraints:
- *  i6-i7, l7 is used by caller
- *
- * Arguments
- *  - o0 Bridge Information: I/O AREA and parent bus
- *
- * Results
- *  - o0 Number of AHB bridges found
- *  - i0-i5 initialized
- *
- * Clobbered
- *  - o0 (Current AHB slave conf address)
- *  - o2 (Used by insert_bridge)
- *  - o3 (Used by insert_bridge)
- *  - l0 (Current AHB Bus)
- *  - l1 (Used by nomem_amba_scan)
- *  - l2 (Used by nomem_amba_scan)
- *  - l3 (Used by nomem_amba_scan)
- *  - l4 (Used by nomem_amba_scan)
- *
- *  - g1 (level 1 return address)
- *  - g2 (Used by nomem_amba_scan)
- */
-_nomem_ambapp_find_buses:
-	mov	%o7, %g1	/* Save return address */
-
-	/* Initialize AHB Bus storage */
-	call	init_ahb_bridges
-	 nop
-
-	/* Insert AHB Bus 0 */
-	call	insert_ahb_bridge
-	 nop			/* Argument already prepared by caller */
-
-	/* Scan AHB Bus 0 for AHB Bridges */
-	call	_nomem_amba_scan
-	 add	%g0, 1, %o1
-
-	/* Scan all AHB Buses found for more AHB Bridges */
-	add	%g0, 2, %l0
-.L100_search_next_ahb_bus:
-	call	get_ahb_bridge			/* Get bus %l0 I/O Area */
-	 mov	%l0, %o0
-	cmp	%o0, %g0
-	be	.L100_return			/* If no more AHB bus is left to be scanned, proceed */
-	 nop
-	call	_nomem_amba_scan		/* Scan bus %l0 for AHB Bridges. i0-i7,l0 is used */
-	 mov	%l0, %o1			/* I/O AREA untouched in o0 */
-	ba	.L100_search_next_ahb_bus	/* Do next bus */
-	 add	%l0, 1, %l0
-
-.L100_return:
-	mov	%g1, %o7
-	retl
-	 nop
-
-
-/* FUNCTION _nomem_amba_init(unsigned int ioarea)
- *
- *  Find all AHB buses
- *
- * Constraints:
- *  i6, i7, o6, o7, l7, l6, g3, g4, g5, g6, g7 is used by caller
- *
- * Arguments
- *  - o0 Bridge Information: I/O AREA and parent bus
- *
- * Results
- *  - o0 Number of AHB bridges found
- *
- * Clobbered
- *  - l0, l1, l2, l3, l4, g1, g2 (used by _nomem_ambapp_find_buses)
- *  - o0, o1, o2, o3 (Used as arguments)
- *  - o5 (return address)
- *  - g1 (level 1 return address)
- *  - g2 (level 2 return address)
- */
-_nomem_amba_init:
-	mov	%o7, %o5	/* Save return address, o5 not used */
-
-	/* Scan for buses, it will init i0-i5 */
-	call	_nomem_ambapp_find_buses
-	 nop
-
-	mov	%o5, %o7
-	retl
-	 nop
-
-/* Call tree and their return address register
- *
- *_nomem_amba_scan           (g1)
- * -> init_ahb_bridges       (o7)
- * -> insert_ahb_bridge      (o7)
- * -> _nomem_amba_scan       (g2)
- *    -> insert_ahb_bridge   (o7)
- * -> get_ahb_bridge         (o7)
- *
- *
- * -> _nomem_find_apb        (g2)
- *    -> get_ahb_bridge      (o7)
- *    -> _nomem_find_ahb_bus (o7)
- *    -> _nomem_find_apb_bus (o7)
- * -> _nomem_find_ahb        (g2)
- *    -> get_ahb_bridge      (o7)
- *    -> _nomem_find_ahb_bus (o7)
- * -> mem_handler.func()     (o7)
- *
- */
diff --git a/arch/sparc/cpu/leon3/ambapp_low_c.S b/arch/sparc/cpu/leon3/ambapp_low_c.S
deleted file mode 100644
index 42288fac598f..000000000000
--- a/arch/sparc/cpu/leon3/ambapp_low_c.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/* C-interface for AMBA PnP scanning functions implemented in
- * ambapp_low.S. At the point the memory and stack can be
- * used.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-	.seg	"text"
-	.extern	_nomem_ambapp_find_buses
-	.extern	_nomem_find_apb
-	.extern	_nomem_find_ahb
-
-	.globl	ambapp_find_buses
-	.globl	ambapp_find_apb
-	.globl	ambapp_find_ahb
-
-
-/* C-interface for _nomem_ambapp_find_buses used when memory is available.
- */
-ambapp_find_buses:
-	save	%sp, -104, %sp
-	mov	%i1, %l7	/* Save second argument */
-	call _nomem_ambapp_find_buses
-	 mov	%i0, %o0
-
-	/* Store result */
-	st	%g0, [%l7+0x00]
-	st	%i0, [%l7+0x04]
-	st	%i1, [%l7+0x08]
-	st	%i2, [%l7+0x0c]
-	st	%i3, [%l7+0x10]
-	st	%i4, [%l7+0x14]
-	st	%i5, [%l7+0x18]
-
-	ret
-	 restore
-
-/* C-interface for _nomem_find_apb used when memory is available.
- *
- * void ambapp_find_apb(
- *	struct ambapp_bus *abus,
- *	unsigned int dev_vend,
- *	int index,
- *	struct ambapp_find_apb_info *result
- *	);
- *
- */
-ambapp_find_apb:
-	save	%sp, -104, %sp
-
-	mov	%i3, %l7	/* Save second argument */
-	mov	%i1, %o1
-	mov	%i2, %o2
-
-	/* Initialize buses available in system */
-	ld	[%i0+0x08], %i1
-	ld	[%i0+0x0c], %i2
-	ld	[%i0+0x10], %i3
-	ld	[%i0+0x14], %i4
-	ld	[%i0+0x18], %i5
-
-	call _nomem_find_apb
-	 ld	[%i0+0x04], %i0
-
-	st	%o2, [%l7+0x08]	/* Decremented Index */
-	st	%o3, [%l7]	/* PnP configuration address of APB Device */
-	st	%o4, [%l7+0x04]	/* AHB Bus Index of AHB/APB bridge and APB Device */
-	mov	%o0, %i0
-	ret
-	 restore
-
-/* C-interface for _nomem_find_ahb used when memory is available.
- *
- * void ambapp_find_ahb(
- *	struct ambapp_bus *abus,
- *	unsigned int dev_vend,
- *	int index,
- *	int type,
- *	struct ambapp_find_ahb_info *result
- *	);
- *
- */
-ambapp_find_ahb:
-	save	%sp, -104, %sp
-
-	mov	%i4, %l7	/* Save second argument */
-	clr	%o0
-	mov	%i1, %o1
-	mov	%i2, %o2
-	clr	%o3
-	clr	%o4
-	mov	%i3, %o5
-
-	/* Initialize buses available in system */
-	ld	[%i0+0x08], %i1
-	ld	[%i0+0x0c], %i2
-	ld	[%i0+0x10], %i3
-	ld	[%i0+0x14], %i4
-	ld	[%i0+0x18], %i5
-
-	call _nomem_find_ahb
-	 ld	[%i0+0x04], %i0
-
-	st	%o2, [%l7+0x08]	/* Decremented Index */
-	st	%o3, [%l7]	/* PnP configuration address of AHB Device */
-	st	%o4, [%l7+0x04]	/* AHB Bus Index of AHB Device */
-	mov	%o0, %i0
-	ret
-	 restore
diff --git a/arch/sparc/cpu/leon3/cpu.c b/arch/sparc/cpu/leon3/cpu.c
deleted file mode 100644
index 149e5c69e631..000000000000
--- a/arch/sparc/cpu/leon3/cpu.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/* CPU specific code for the LEON3 CPU
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <netdev.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <ambapp.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void _reset_reloc(void);
-
-int leon_cpu_cnt = 1;
-int leon_ver = 3;
-unsigned int leon_cpu_freq = CONFIG_SYS_CLK_FREQ;
-
-int cpu_freq(void)
-{
-	ambapp_ahbdev dev;
-
-	if (leon_ver == 3) {
-		ambapp_ahbmst_find(&ambapp_plb, VENDOR_GAISLER,
-			GAISLER_LEON3, 0, &dev);
-	} else {
-		ambapp_ahbmst_find(&ambapp_plb, VENDOR_GAISLER,
-			GAISLER_LEON4, 0, &dev);
-	}
-
-	leon_cpu_freq = ambapp_bus_freq(&ambapp_plb, dev.ahb_bus_index);
-
-	return 0;
-}
-
-int checkcpu(void)
-{
-	int cnt;
-	char str[4];
-
-	/* check LEON version here */
-	cnt = ambapp_ahbmst_count(&ambapp_plb, VENDOR_GAISLER, GAISLER_LEON3);
-	if (cnt <= 0) {
-		cnt = ambapp_ahbmst_count(&ambapp_plb, VENDOR_GAISLER,
-			GAISLER_LEON4);
-		if (cnt > 0)
-			leon_ver = 4;
-	}
-
-	cpu_freq();
-
-	str[0] = '\0';
-	if (cnt > 1) {
-		leon_cpu_cnt = cnt;
-		str[0] = '0' + cnt;
-		str[1] = 'x';
-		str[2] = '\0';
-	}
-	printf("CPU: %sLEON%d @ %dMHz\n", str, leon_ver,
-		leon_cpu_freq / 1000000);
-
-	return 0;
-}
-
-#ifdef CONFIG_DISPLAY_CPUINFO
-
-int print_cpuinfo(void)
-{
-	printf("CPU:   LEON3\n");
-	return 0;
-}
-
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-void cpu_reset(void)
-{
-	/* Interrupts off */
-	disable_interrupts();
-
-	/* jump to restart in flash */
-	_reset_reloc();
-}
-
-int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	cpu_reset();
-
-	return 1;
-
-}
-
-u64 flash_read64(void *addr)
-{
-	return __raw_readq(addr);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_GRETH
-int cpu_eth_init(bd_t *bis)
-{
-	return greth_initialize(bis);
-}
-#endif
diff --git a/arch/sparc/cpu/leon3/cpu_init.c b/arch/sparc/cpu/leon3/cpu_init.c
deleted file mode 100644
index f25388cf8411..000000000000
--- a/arch/sparc/cpu/leon3/cpu_init.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* Initializes CPU and basic hardware such as memory
- * controllers, IRQ controller and system timer 0.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/asi.h>
-#include <asm/leon.h>
-#include <asm/io.h>
-#include <ambapp.h>
-#include <grlib/irqmp.h>
-#include <grlib/gptimer.h>
-#include <debug_uart.h>
-
-#include <config.h>
-
-/* Default Plug&Play I/O area */
-#ifndef CONFIG_AMBAPP_IOAREA
-#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA
-#endif
-
-/* Select which TIMER that will become the time base */
-#ifndef CONFIG_SYS_GRLIB_GPTIMER_INDEX
-#define CONFIG_SYS_GRLIB_GPTIMER_INDEX 0
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-ambapp_dev_irqmp *irqmp = NULL;
-
-/*
- * Breath some life into the CPU...
- *
- * Run from FLASH/PROM:
- *  - until memory controller is set up, only registers available
- *  - memory controller has already been setup up, stack can be used
- *  - no global variables available for writing
- *  - constants available
- */
-void cpu_init_f(void)
-{
-#ifdef CONFIG_DEBUG_UART
-	debug_uart_init();
-#endif
-}
-
-/* If cache snooping is available in hardware the result will be set
- * to 0x800000, otherwise 0.
- */
-static unsigned int snoop_detect(void)
-{
-	unsigned int result;
-	asm("lda [%%g0] 2, %0" : "=r"(result));
-	return result & 0x00800000;
-}
-
-int arch_cpu_init(void)
-{
-	ambapp_apbdev apbdev;
-	int index;
-
-	gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
-	gd->bus_clk = CONFIG_SYS_CLK_FREQ;
-	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
-
-	gd->arch.snooping_available = snoop_detect();
-
-	/* Initialize the AMBA Plug & Play bus structure, the bus
-	 * structure represents the AMBA bus that the CPU is located at.
-	 */
-	ambapp_bus_init(CONFIG_AMBAPP_IOAREA, CONFIG_SYS_CLK_FREQ, &ambapp_plb);
-
-	/* Initialize/clear all the timers in the system.
-	 */
-	for (index = 0; ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER,
-		GAISLER_GPTIMER, index, &apbdev) == 1; index++) {
-		ambapp_dev_gptimer *timer;
-		unsigned int bus_freq;
-		int i, ntimers;
-
-		timer = (ambapp_dev_gptimer *)apbdev.address;
-
-		/* Different buses may have different frequency, the
-		 * frequency of the bus tell in which frequency the timer
-		 * prescaler operates.
-		 */
-		bus_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index);
-
-		/* Initialize prescaler common to all timers to 1MHz */
-		timer->scalar = timer->scalar_reload =
-			(((bus_freq / 1000) + 500) / 1000) - 1;
-
-		/* Clear all timers */
-		ntimers = timer->config & 0x7;
-		for (i = 0; i < ntimers; i++) {
-			timer->e[i].ctrl = GPTIMER_CTRL_IP;
-			timer->e[i].rld = 0;
-			timer->e[i].ctrl = GPTIMER_CTRL_LD;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r(void)
-{
-	ambapp_apbdev apbdev;
-	int cpu;
-
-	/*
-	 * Find AMBA APB IRQMP Controller,
-	 */
-	if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER,
-		GAISLER_IRQMP, 0, &apbdev) != 1) {
-		panic("%s: IRQ controller not found\n", __func__);
-		return -1;
-	}
-	irqmp = (ambapp_dev_irqmp *)apbdev.address;
-
-	/* initialize the IRQMP */
-	irqmp->ilevel = 0xf;	/* all IRQ off */
-	irqmp->iforce = 0;
-	irqmp->ipend = 0;
-	irqmp->iclear = 0xfffe;	/* clear all old pending interrupts */
-	for (cpu = 0; cpu < 16; cpu++) {
-		/* mask and clear force for all IRQs on CPU[N] */
-		irqmp->cpu_mask[cpu] = 0;
-		irqmp->cpu_force[cpu] = 0;
-	}
-
-	return 0;
-}
-
-			;
-int timer_init(void)
-{
-	ambapp_dev_gptimer_element *tmr;
-	ambapp_dev_gptimer *gptimer;
-	ambapp_apbdev apbdev;
-	unsigned bus_freq;
-
-	if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_GPTIMER,
-		CONFIG_SYS_GRLIB_GPTIMER_INDEX, &apbdev) != 1) {
-		panic("%s: gptimer not found!\n", __func__);
-		return -1;
-	}
-
-	gptimer = (ambapp_dev_gptimer *) apbdev.address;
-
-	/* Different buses may have different frequency, the
-	 * frequency of the bus tell in which frequency the timer
-	 * prescaler operates.
-	 */
-	bus_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index);
-
-	/* initialize prescaler common to all timers to 1MHz */
-	gptimer->scalar = gptimer->scalar_reload =
-		(((bus_freq / 1000) + 500) / 1000) - 1;
-
-	tmr = (ambapp_dev_gptimer_element *)&gptimer->e[0];
-
-	tmr->val = 0;
-	tmr->rld = ~0;
-	tmr->ctrl = GPTIMER_CTRL_EN | GPTIMER_CTRL_RS | GPTIMER_CTRL_LD;
-
-	CONFIG_SYS_TIMER_COUNTER = (void *)&tmr->val;
-	return 0;
-}
diff --git a/arch/sparc/cpu/leon3/interrupts.c b/arch/sparc/cpu/leon3/interrupts.c
deleted file mode 100644
index 00c3288774fb..000000000000
--- a/arch/sparc/cpu/leon3/interrupts.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com
- *
- * (C) Copyright 2006
- * Detlev Zundel, DENX Software Engineering, dzu at denx.de
- *
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber at mclx.com>, Mission Critical Linux, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm/stack.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <command.h>
-#include <asm/irq.h>
-
-#include <asm/leon.h>
-#include <ambapp.h>
-#include <grlib/irqmp.h>
-#include <grlib/gptimer.h>
-
-/* 15 normal irqs and a non maskable interrupt */
-#define NR_IRQS 15
-
-struct irq_action {
-	interrupt_handler_t *handler;
-	void *arg;
-	unsigned int count;
-};
-
-extern ambapp_dev_irqmp *irqmp;
-extern ambapp_dev_gptimer *gptimer;
-
-static struct irq_action irq_handlers[NR_IRQS] = { {0}, };
-static int spurious_irq_cnt = 0;
-static int spurious_irq = 0;
-
-static inline unsigned int irqmp_get_irqmask(unsigned int irq)
-{
-	if ((irq < 0) || (irq >= NR_IRQS)) {
-		return 0;
-	} else {
-		return (1 << irq);
-	}
-
-}
-
-static void leon3_ic_disable(unsigned int irq)
-{
-	unsigned int mask, pil;
-	if (!irqmp)
-		return;
-
-	pil = intLock();
-
-	/* get mask of interrupt */
-	mask = irqmp_get_irqmask(irq);
-
-	/* set int level */
-	irqmp->cpu_mask[0] = SPARC_NOCACHE_READ(&irqmp->cpu_mask[0]) & (~mask);
-
-	intUnlock(pil);
-}
-
-static void leon3_ic_enable(unsigned int irq)
-{
-	unsigned int mask, pil;
-	if (!irqmp)
-		return;
-
-	pil = intLock();
-
-	/* get mask of interrupt */
-	mask = irqmp_get_irqmask(irq);
-
-	/* set int level */
-	irqmp->cpu_mask[0] = SPARC_NOCACHE_READ(&irqmp->cpu_mask[0]) | mask;
-
-	intUnlock(pil);
-
-}
-
-void handler_irq(int irq, struct pt_regs *regs)
-{
-	if (irq_handlers[irq].handler) {
-		if (((unsigned int)irq_handlers[irq].handler > CONFIG_SYS_RAM_END) ||
-		    ((unsigned int)irq_handlers[irq].handler < CONFIG_SYS_RAM_BASE)
-		    ) {
-			printf("handler_irq: bad handler: %x, irq number %d\n",
-			       (unsigned int)irq_handlers[irq].handler, irq);
-			return;
-		}
-		irq_handlers[irq].handler(irq_handlers[irq].arg);
-		irq_handlers[irq].count++;
-	} else {
-		spurious_irq_cnt++;
-		spurious_irq = irq;
-	}
-}
-
-void leon3_force_int(int irq)
-{
-	if (!irqmp || (irq >= NR_IRQS) || (irq < 0))
-		return;
-	printf("Forcing interrupt %d\n", irq);
-
-	irqmp->iforce = SPARC_NOCACHE_READ(&irqmp->iforce) | (1 << irq);
-}
-
-/****************************************************************************/
-
-int interrupt_init_cpu(void)
-{
-
-	return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
-{
-	if (irq < 0 || irq >= NR_IRQS) {
-		printf("irq_install_handler: bad irq number %d\n", irq);
-		return;
-	}
-
-	if (irq_handlers[irq].handler != NULL)
-		printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
-		       (ulong) handler, (ulong) irq_handlers[irq].handler);
-
-	if (((unsigned int)handler > CONFIG_SYS_RAM_END) ||
-	    ((unsigned int)handler < CONFIG_SYS_RAM_BASE)
-	    ) {
-		printf("irq_install_handler: bad handler: %x, irq number %d\n",
-		       (unsigned int)handler, irq);
-		return;
-	}
-	irq_handlers[irq].handler = handler;
-	irq_handlers[irq].arg = arg;
-
-	/* enable irq on IRQMP hardware */
-	leon3_ic_enable(irq);
-
-}
-
-void irq_free_handler(int irq)
-{
-	if (irq < 0 || irq >= NR_IRQS) {
-		printf("irq_free_handler: bad irq number %d\n", irq);
-		return;
-	}
-
-	/* disable irq on IRQMP hardware */
-	leon3_ic_disable(irq);
-
-	irq_handlers[irq].handler = NULL;
-	irq_handlers[irq].arg = NULL;
-}
-
-/****************************************************************************/
-
-#if defined(CONFIG_CMD_IRQ)
-void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char * const argv[])
-{
-	int irq;
-	unsigned int pil = get_pil();
-	printf("PIL level: %u\n\r", pil);
-	printf("Spurious IRQ: %u, last unknown IRQ: %d\n",
-	       spurious_irq_cnt, spurious_irq);
-
-	puts("\nInterrupt-Information:\n" "Nr  Routine   Arg       Count\n");
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		if (irq_handlers[irq].handler != NULL) {
-			printf("%02d  %p  %p  %d\n", irq,
-			       irq_handlers[irq].handler,
-			       irq_handlers[irq].arg,
-			       irq_handlers[irq].count);
-		}
-	}
-}
-#endif
diff --git a/arch/sparc/cpu/leon3/memcfg.c b/arch/sparc/cpu/leon3/memcfg.c
deleted file mode 100644
index b9eda440e226..000000000000
--- a/arch/sparc/cpu/leon3/memcfg.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/* GRLIB Memory controller setup. The register values are used
- * from the associated low level assembler routine implemented
- * in memcfg_low.S.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ambapp.h>
-#include "memcfg.h"
-#include <config.h>
-
-#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1
-struct mctrl_setup esa_mctrl1_cfg = {
-	.reg_mask = 0x7,
-	.regs = {
-		{
-			.mask = 0x00000300,
-			.value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3,
-		},
-	}
-};
-#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2
-struct mctrl_setup esa_mctrl2_cfg = {
-	.reg_mask = 0x7,
-	.regs = {
-		{
-			.mask = 0x00000300,
-			.value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG1,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG2,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_ESA_MCTRL2_CFG3,
-		},
-	}
-};
-#endif
-#endif
-
-#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-struct mctrl_setup gaisler_ftmctrl1_cfg = {
-	.reg_mask = 0x7,
-	.regs = {
-		{
-			.mask = 0x00000300,
-			.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3,
-		},
-	}
-};
-#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2
-struct mctrl_setup gaisler_ftmctrl2_cfg = {
-	.reg_mask = 0x7,
-	.regs = {
-		{
-			.mask = 0x00000300,
-			.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG1,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG2,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2_CFG3,
-		},
-	}
-};
-#endif
-#endif
-
-#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-struct mctrl_setup gaisler_sdctrl1_cfg = {
-	.reg_mask = 0x1,
-	.regs = {
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL1_CTRL,
-		},
-	}
-};
-#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2
-struct mctrl_setup gaisler_sdctrl2_cfg = {
-	.reg_mask = 0x1,
-	.regs = {
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_SDCTRL2_CTRL,
-		},
-	}
-};
-#endif
-#endif
-
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-struct ahbmctrl_setup gaisler_ddr2spa1_cfg = {
-	.ahb_mbar_no = 1,
-	.reg_mask = 0xd,
-	.regs = {
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG1,
-		},
-		{ 0x00000000, 0},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG3,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1_CFG4,
-		},
-	}
-};
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2
-struct ahbmctrl_setup gaisler_ddr2spa2_cfg = {
-	.ahb_mbar_no = 1,
-	.reg_mask = 0xd,
-	.regs = {
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG1,
-		},
-		{ 0x00000000, 0},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG3,
-		},
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2_CFG4,
-		},
-	}
-};
-#endif
-#endif
-
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-struct ahbmctrl_setup gaisler_ddrspa1_cfg = {
-	.ahb_mbar_no = 1,
-	.reg_mask = 0x1,
-	.regs = {
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL,
-		},
-	}
-};
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2
-struct ahbmctrl_setup gaisler_ddrspa2_cfg = {
-	.ahb_mbar_no = 1,
-	.reg_mask = 0x1,
-	.regs = {
-		{
-			.mask = 0x00000000,
-			.value = CONFIG_SYS_GRLIB_GAISLER_DDRSPA2_CTRL,
-		},
-	}
-};
-#endif
-#endif
-
-struct grlib_mctrl_handler grlib_mctrl_handlers[] = {
-/* ESA MCTRL (PROM/FLASH/IO/SRAM/SDRAM) */
-#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL1
-	{DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL),
-	_nomem_mctrl_init, (void *)&esa_mctrl1_cfg},
-#ifdef CONFIG_SYS_GRLIB_ESA_MCTRL2
-	{DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_ESA, ESA_MCTRL),
-	_nomem_mctrl_init, (void *)&esa_mctrl2_cfg},
-#endif
-#endif
-
-/* GAISLER Fault Tolerant Memory controller (PROM/FLASH/IO/SRAM/SDRAM) */
-#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-	{DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL),
-	_nomem_mctrl_init, (void *)&gaisler_ftmctrl1_cfg},
-#ifdef CONFIG_SYS_GRLIB_GAISLER_FTMCTRL2
-	{DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_FTMCTRL),
-	_nomem_mctrl_init, (void *)&gaisler_ftmctrl2_cfg},
-#endif
-#endif
-
-/* GAISLER SDRAM-only Memory controller (SDRAM) */
-#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-	{DEV_APB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL),
-	_nomem_mctrl_init, (void *)&gaisler_sdctrl1_cfg},
-#ifdef CONFIG_SYS_GRLIB_GAISLER_SDCTRL2
-	{DEV_APB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_SDCTRL),
-	_nomem_mctrl_init, (void *)&gaisler_sdctrl2_cfg},
-#endif
-#endif
-
-/* GAISLER DDR Memory controller (DDR) */
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-	{DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP),
-	_nomem_ahbmctrl_init, (void *)&gaisler_ddrspa1_cfg},
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDRSPA2
-	{DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDRSP),
-	_nomem_ahbmctrl_init, (void *)&gaisler_ddrspa2_cfg},
-#endif
-#endif
-
-/* GAISLER DDR2 Memory controller (DDR2) */
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-	{DEV_AHB_SLV, 0, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP),
-	_nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa1_cfg},
-#ifdef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA2
-	{DEV_AHB_SLV, 1, MH_UNUSED, AMBA_PNP_ID(VENDOR_GAISLER, GAISLER_DDR2SP),
-	_nomem_ahbmctrl_init, (void *)&gaisler_ddr2spa2_cfg},
-#endif
-#endif
-
-	/* Mark end */
-	MH_END
-};
diff --git a/arch/sparc/cpu/leon3/memcfg.h b/arch/sparc/cpu/leon3/memcfg.h
deleted file mode 100644
index a524896e5ad0..000000000000
--- a/arch/sparc/cpu/leon3/memcfg.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/* GRLIB Memory controller setup structures
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __MEMCFG_H__
-#define __MEMCFG_H__
-
-/*********** Low Level Memory Controller Initalization ***********/
-
-#ifndef __ASSEMBLER__
-
-struct grlib_mctrl_handler;
-
-typedef void (*mctrl_handler_t)(
-	struct grlib_mctrl_handler *dev,
-	void *conf,
-	unsigned int ioarea
-	);
-
-/* Memory Controller Handler Structure */
-struct grlib_mctrl_handler {
-	unsigned char	type;		/* 0x00. MASK: AHB MST&SLV, APB SLV */
-	char		index;		/* 0x01. Unit number, 0, 1, 2... */
-	char		unused[2];	/* 0x02 */
-	unsigned int	ven_dev;	/* 0x04. Device and Vendor */
-	mctrl_handler_t	func;		/* 0x08. Memory Controller Handler */
-	void		*priv;		/* 0x0c. Optional private data, ptr to
-					 * info how to set up controller */
-};
-
-extern struct grlib_mctrl_handler grlib_mctrl_handlers[];
-
-#endif
-
-#define MH_STRUCT_SIZE		(4*4)
-#define MH_TYPE			0x00
-#define MH_INDEX		0x01
-#define MH_VENDOR_DEVICE	0x04
-#define MH_FUNC			0x08
-#define MH_PRIV			0x0c
-
-#define MH_TYPE_NONE	DEV_NONE
-#define MH_TYPE_AHB_MST	DEV_AHB_MST
-#define MH_TYPE_AHB_SLV	DEV_AHB_SLV
-#define MH_TYPE_APB_SLV	DEV_APB_SLV
-
-#define MH_UNUSED	{0, 0}
-#define MH_END		{DEV_NONE, 0, MH_UNUSED, AMBA_PNP_ID(0, 0), 0, 0}
-
-/*********** Low Level Memory Controller Initalization Handlers ***********/
-
-#ifndef __ASSEMBLER__
-extern void _nomem_mctrl_init(
-	struct grlib_mctrl_handler *dev,
-	void *conf,
-	unsigned int ioarea_apbmst);
-
-struct mctrl_setup {
-	unsigned int reg_mask;		/* Which registers to write */
-	struct {
-		unsigned int mask;	/* Mask used keep reg bits unchanged */
-		unsigned int value;	/* Value written to register */
-	} regs[8];
-};
-
-extern void _nomem_ahbmctrl_init(
-	struct grlib_mctrl_handler *dev,
-	void *conf,
-	unsigned int ioarea_apbmst);
-
-struct ahbmctrl_setup {
-	int ahb_mbar_no;		/* MBAR to get register address from */
-	unsigned int reg_mask;		/* Which registers to write */
-	struct {
-		unsigned int mask;	/* Mask used keep reg bits unchanged */
-		unsigned int value;	/* Value written to register */
-	} regs[8];
-};
-#endif
-
-/* mctrl_setup data structure defines */
-#define NREGS_OFS 0
-#define REGS_OFS 0x4
-#define REGS_SIZE 8
-
-#endif
diff --git a/arch/sparc/cpu/leon3/memcfg_low.S b/arch/sparc/cpu/leon3/memcfg_low.S
deleted file mode 100644
index 84a81a90a9af..000000000000
--- a/arch/sparc/cpu/leon3/memcfg_low.S
+++ /dev/null
@@ -1,253 +0,0 @@
-/* This is the memory initialization functions, the function
- * implemented below initializes each memory controller
- * found and specified by the input grlib_mctrl_handler structure.
- *
- * After the memory controllers have been initialized the stack
- * can be used.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <ambapp.h>
-#include "memcfg.h"
-#include <config.h>
-
-	.seg	"text"
-	.globl	_nomem_memory_ctrl_init
-	.globl	_nomem_mctrl_init, _nomem_ahbmctrl_init
-	.extern	_nomem_find_apb
-	.extern	_nomem_find_ahb
-
-
-/* FUNCTION
- *   _nomem_memory_controller_init(struct grlib_mctrl_handler *mem_handlers)
- *
- * Initialize AMBA devices, _nomem_amba_init() has prepared i0-i5
- * with the AHB buses on the system.
- *
- * For each entry in mem_handlers find the VENDOR:DEVICE and handle it
- * by calling the handler function pointer.
- *
- * Constraints:
- *  i6, i7, o6, l7, l6, g3, g4, g5, g6, g7 is used by caller
- *  o7 is return address
- *  l5 reserved for this function for future use.
- *
- * Arguments
- *  - o0 Pointer to memory handler array
- *
- * Results
- *  - o0 Number of memory controllers found
- *
- * Clobbered
- *  - o0 (Current AHB slave conf address)
- *  - l0 (mem handler entry address)
- *  - l1 (Return value, number of memory controllers found)
- *  - o7 (function pointer)
- *  - l0, l1, l2, l3, l4, g1, g2 (used by _nomem_ambapp_find_buses)
- *  - o0, o1, o2, o3, o4, o5 (Used as arguments)
- *
- *  - g1 ( level 1 return address)
- *  - g2 ( level 2 return address)
- */
-
-_nomem_memory_ctrl_init:
-	/* At this point all AHB buses has been found and the I/O Areas of
-	 * all AHB buses is stored in the i0-i5 registers. Max 6 buses. Next,
-	 * memory controllers are found by searching all buses for matching
-	 * VENDOR:DEVICE. The VENDOR:DEVICE to search for are taken from the
-	 * mem_handlers array. For each match the function pointer stored in
-	 * the mem_handler entry is called to handle the hardware setup.
-	 */
-	mov	%o7, %g1	/* Save return address */
-	mov	%o0, %l0
-	mov	%g0, %l1	/* The return value */
-
-.L_do_one_mem_handler:
-	ld	[%l0 + MH_FUNC], %o7
-	cmp	%o7, %g0
-	be	.L_all_mctrl_handled
-	 nop
-
-	/*** Scan for memory controller ***/
-
-	/* Set up argments, o5 not used by _nomem_find_apb */
-	ldub	[%l0 + MH_TYPE], %o5
-	clr	%o4
-	clr	%o3
-	ldub	[%l0 + MH_INDEX], %o2
-	ld	[%l0 + MH_VENDOR_DEVICE], %o1
-
-	/* An empty config? */
-	cmp	%o5, DEV_NONE
-	beq	.L_all_mctrl_next
-
-	/* Select function (APB or AHB) */
-	 cmp	%o5, DEV_APB_SLV
-	bne	.L_find_ahb_memctrl
-	 clr	%o0
-.L_find_apb_memctrl:
-	call	_nomem_find_apb			/* Scan for APB slave device */
-	 nop
-
-	/* o3 = iobar address
-	 * o4 = AHB Bus index
-	 *
-	 * REG ADR = ((iobar >> 12) & (iobar << 4) & 0xfff00) | "APB Base"
-	 */
-	ld	[%o3 + AMBA_APB_IOBAR_OFS], %o5
-	srl	%o5, 12, %o2
-	sll	%o5, 4, %o5
-	and	%o2, %o5, %o5
-	set	0xfff00, %o2
-	and	%o2, %o5, %o5
-	sethi	%hi(0xfff00000), %o2
-	and	%o3, %o2, %o2
-	or	%o5, %o2, %o5	/* Register base address */
-
-	ba	.L_call_one_mem_handler
-	 nop
-
-.L_find_ahb_memctrl:
-	call	_nomem_find_ahb		/* Scan for AHB Slave or Master.
-					 * o5 determine type. */
-	 nop
-	clr	%o5
-
-	/* Call the handler function if the hardware was found
-	 *
-	 * o0 = mem_handler
-	 * o1 = Configuration address
-	 * o2 = AHB Bus index
-	 * o3 = APB Base register (if APB Slave)
-	 *
-	 * Constraints:
-	 * i0-i7, l0, l1, l5, g1, g3-g7 may no be used.
-	 */
-.L_call_one_mem_handler:
-	cmp	%o0, %g0
-	be	.L_all_mctrl_next
-	 mov	%l0, %o0			/* Mem handler pointer */
-	mov	%o3, %o1			/* AMBA PnP Configuration address */
-	mov	%o4, %o2			/* AHB Bus index */
-	ld	[%l0 + MH_FUNC], %o7	/* Get Function pointer */
-	call	%o7
-	 mov	%o5, %o3			/* APB Register Base Address */
-
-	inc	%l1				/* Number of Memory controllers
-						 * handled. */
-
-	/* Do next entry in mem_handlers */
-.L_all_mctrl_next:
-	ba	.L_do_one_mem_handler
-	 add	%l0, MH_STRUCT_SIZE, %l0
-
-.L_all_mctrl_handled:
-	mov	%g1, %o7	/* Restore return address */
-	retl
-	 mov	%l1, %o0
-
-
-
-/* Generic Memory controller initialization routine (APB Registers)
- *
- * o0 = mem_handler structure pointer
- * o1 = Configuration address
- * o2 = AHB Bus index
- * o3 = APB Base register
- *
- * Clobbered
- *  o0-o4
- */
-_nomem_mctrl_init:
-	ld	[%o0 + MH_PRIV], %o0	/* Get Private structure */
-	ld	[%o0], %o1		/* Get Reg Mask */
-	and	%o1, 0xff, %o1
-	add	%o0, REGS_OFS, %o0	/* Point to first reg */
-.L_do_one_reg:
-	andcc	%o1, 0x1, %g0
-	beq	.L_do_next_reg
-	 ld	[%o0], %o2
-	ld	[%o3], %o4
-	and	%o4, %o2, %o4
-	ld	[%o0 + 4], %o2
-	or	%o4, %o2, %o4
-	st	%o4, [%o3]
-
-.L_do_next_reg:
-	add	%o0, REGS_SIZE, %o0
-	add	%o3, 4, %o3
-	srl	%o1, 1, %o1
-	cmp	%o1, 0
-	bne	.L_do_one_reg
-	 nop
-
-	/* No more registers to write */
-	retl
-	 nop
-
-
-
-/* Generic Memory controller initialization routine (AHB Registers)
- *
- * o0 = mem_handler structure pointer
- * o1 = Configuration address of memory controller
- * o2 = AHB Bus index
- *
- * Clobbered
- *  o0-o5
- */
-_nomem_ahbmctrl_init:
-	ld	[%o0 + MH_PRIV], %o0		/* Get Private structure */
-
-	/* Get index of AHB MBAR to get registers from */
-	ld	[%o0], %o5
-	add	%o0, 4, %o0
-
-	/* Get Address of MBAR in PnP info */
-	add	%o5, 4, %o5
-	sll	%o5, 2, %o5
-	add	%o5, %o1, %o5			/* Address of MBAR */
-
-	/* Get Address of registers from PnP information
-	 * Address is in AHB I/O format, i.e. relative to bus
-	 *
-	 * ADR = (iobar & (iobar << 16) & 0xfff00000)
-	 * IOADR = (ADR >> 12) | "APB Base"
-	 */
-	ld	[%o5], %o5
-	sll	%o5, 16, %o4
-	and	%o5, %o4, %o5
-	sethi	%hi(0xfff00000), %o4
-	and	%o5, %o4, %o5			/* ADR */
-	and	%o4, %o1, %o4
-	srl	%o5, 12, %o5
-	or	%o5, %o4, %o3			/* IOADR in o3 */
-
-	ld	[%o0], %o1			/* Get Reg Mask */
-	and	%o1, 0xff, %o1
-	add	%o0, REGS_OFS, %o0		/* Point to first reg */
-.L_do_one_ahbreg:
-	andcc	%o1, 0x1, %g0
-	beq	.L_do_next_reg
-	 ld	[%o0], %o2
-	ld	[%o3], %o4
-	and	%o4, %o2, %o4
-	ld	[%o0 + 4], %o2
-	or	%o4, %o2, %o4
-	st	%o4, [%o3]
-
-.L_do_next_ahbreg:
-	add	%o0, REGS_SIZE, %o0
-	add	%o3, 4, %o3
-	srl	%o1, 1, %o1
-	cmp	%o1, 0
-	bne	.L_do_one_reg
-	 nop
-
-	/* No more registers to write */
-	retl
-	 nop
diff --git a/arch/sparc/cpu/leon3/prom.c b/arch/sparc/cpu/leon3/prom.c
deleted file mode 100644
index 1f185b776b48..000000000000
--- a/arch/sparc/cpu/leon3/prom.c
+++ /dev/null
@@ -1,1067 +0,0 @@
-/* prom.c - emulates a sparc v0 PROM for the linux kernel.
- *
- * Copyright (C) 2003 Konrad Eisele <eiselekd at web.de>
- * Copyright (C) 2004 Stefan Holst <mail at s-holst.de>
- * Copyright (C) 2007 Daniel Hellstrom <daniel at gaisler.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/prom.h>
-#include <asm/machines.h>
-#include <asm/srmmu.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/leon.h>
-#include <ambapp.h>
-#include <grlib/apbuart.h>
-#include <grlib/irqmp.h>
-#include <grlib/gptimer.h>
-
-#include <config.h>
-/*
-#define PRINT_ROM_VEC
-*/
-extern struct linux_romvec *kernel_arg_promvec;
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PROM_PGT __attribute__ ((__section__ (".prom.pgt")))
-#define PROM_TEXT __attribute__ ((__section__ (".prom.text")))
-#define PROM_DATA __attribute__ ((__section__ (".prom.data")))
-
-ambapp_dev_gptimer *gptimer;
-
-void *__prom_start_reloc; /* relocated prom_start address */
-
-/* for __va */
-extern int __prom_start;
-#define PAGE_OFFSET 0xf0000000
-#define phys_base CONFIG_SYS_SDRAM_BASE
-#define PROM_OFFS 8192
-#define PROM_SIZE_MASK (PROM_OFFS-1)
-#define __va(x) ( \
-	(void *)( ((unsigned long)(x))-PROM_OFFS+ \
-	(CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-CONFIG_SYS_TEXT_BASE ) \
-	)
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-CONFIG_SYS_TEXT_BASE))
-
-struct property {
-	char *name;
-	char *value;
-	int length;
-};
-
-struct node {
-	int level;
-	struct property *properties;
-};
-
-static void leon_reboot(char *bcommand);
-static void leon_halt(void);
-static int leon_nbputchar(int c);
-static int leon_nbgetchar(void);
-
-static int no_nextnode(int node);
-static int no_child(int node);
-static int no_proplen(int node, char *name);
-static int no_getprop(int node, char *name, char *value);
-static int no_setprop(int node, char *name, char *value, int len);
-static char *no_nextprop(int node, char *name);
-
-static struct property PROM_TEXT *find_property(int node, char *name);
-static int PROM_TEXT leon_strcmp(const char *s1, const char *s2);
-static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n);
-static void PROM_TEXT leon_reboot_physical(char *bcommand);
-
-void __inline__ leon_flush_cache_all(void)
-{
-	__asm__ __volatile__(" flush ");
-      __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_DFLUSH):"memory");
-}
-
-void __inline__ leon_flush_tlb_all(void)
-{
-	leon_flush_cache_all();
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x400),
-			     "i"(ASI_MMUFLUSH):"memory");
-}
-
-typedef struct {
-	unsigned int ctx_table[256];
-	unsigned int pgd_table[256];
-} sparc_srmmu_setup;
-
-sparc_srmmu_setup srmmu_tables PROM_PGT = {
-	{0},
-	{0x1e,
-	 0x10001e,
-	 0x20001e,
-	 0x30001e,
-	 0x40001e,
-	 0x50001e,
-	 0x60001e,
-	 0x70001e,
-	 0x80001e,
-	 0x90001e,
-	 0xa0001e,
-	 0xb0001e,
-	 0xc0001e,
-	 0xd0001e,
-	 0xe0001e,
-	 0xf0001e,
-	 0x100001e,
-	 0x110001e,
-	 0x120001e,
-	 0x130001e,
-	 0x140001e,
-	 0x150001e,
-	 0x160001e,
-	 0x170001e,
-	 0x180001e,
-	 0x190001e,
-	 0x1a0001e,
-	 0x1b0001e,
-	 0x1c0001e,
-	 0x1d0001e,
-	 0x1e0001e,
-	 0x1f0001e,
-	 0x200001e,
-	 0x210001e,
-	 0x220001e,
-	 0x230001e,
-	 0x240001e,
-	 0x250001e,
-	 0x260001e,
-	 0x270001e,
-	 0x280001e,
-	 0x290001e,
-	 0x2a0001e,
-	 0x2b0001e,
-	 0x2c0001e,
-	 0x2d0001e,
-	 0x2e0001e,
-	 0x2f0001e,
-	 0x300001e,
-	 0x310001e,
-	 0x320001e,
-	 0x330001e,
-	 0x340001e,
-	 0x350001e,
-	 0x360001e,
-	 0x370001e,
-	 0x380001e,
-	 0x390001e,
-	 0x3a0001e,
-	 0x3b0001e,
-	 0x3c0001e,
-	 0x3d0001e,
-	 0x3e0001e,
-	 0x3f0001e,
-	 0x400001e,
-	 0x410001e,
-	 0x420001e,
-	 0x430001e,
-	 0x440001e,
-	 0x450001e,
-	 0x460001e,
-	 0x470001e,
-	 0x480001e,
-	 0x490001e,
-	 0x4a0001e,
-	 0x4b0001e,
-	 0x4c0001e,
-	 0x4d0001e,
-	 0x4e0001e,
-	 0x4f0001e,
-	 0x500001e,
-	 0x510001e,
-	 0x520001e,
-	 0x530001e,
-	 0x540001e,
-	 0x550001e,
-	 0x560001e,
-	 0x570001e,
-	 0x580001e,
-	 0x590001e,
-	 0x5a0001e,
-	 0x5b0001e,
-	 0x5c0001e,
-	 0x5d0001e,
-	 0x5e0001e,
-	 0x5f0001e,
-	 0x600001e,
-	 0x610001e,
-	 0x620001e,
-	 0x630001e,
-	 0x640001e,
-	 0x650001e,
-	 0x660001e,
-	 0x670001e,
-	 0x680001e,
-	 0x690001e,
-	 0x6a0001e,
-	 0x6b0001e,
-	 0x6c0001e,
-	 0x6d0001e,
-	 0x6e0001e,
-	 0x6f0001e,
-	 0x700001e,
-	 0x710001e,
-	 0x720001e,
-	 0x730001e,
-	 0x740001e,
-	 0x750001e,
-	 0x760001e,
-	 0x770001e,
-	 0x780001e,
-	 0x790001e,
-	 0x7a0001e,
-	 0x7b0001e,
-	 0x7c0001e,
-	 0x7d0001e,
-	 0x7e0001e,
-	 0x7f0001e,
-	 0x800001e,
-	 0x810001e,
-	 0x820001e,
-	 0x830001e,
-	 0x840001e,
-	 0x850001e,
-	 0x860001e,
-	 0x870001e,
-	 0x880001e,
-	 0x890001e,
-	 0x8a0001e,
-	 0x8b0001e,
-	 0x8c0001e,
-	 0x8d0001e,
-	 0x8e0001e,
-	 0x8f0001e,
-	 0x900001e,
-	 0x910001e,
-	 0x920001e,
-	 0x930001e,
-	 0x940001e,
-	 0x950001e,
-	 0x960001e,
-	 0x970001e,
-	 0x980001e,
-	 0x990001e,
-	 0x9a0001e,
-	 0x9b0001e,
-	 0x9c0001e,
-	 0x9d0001e,
-	 0x9e0001e,
-	 0x9f0001e,
-	 0xa00001e,
-	 0xa10001e,
-	 0xa20001e,
-	 0xa30001e,
-	 0xa40001e,
-	 0xa50001e,
-	 0xa60001e,
-	 0xa70001e,
-	 0xa80001e,
-	 0xa90001e,
-	 0xaa0001e,
-	 0xab0001e,
-	 0xac0001e,
-	 0xad0001e,
-	 0xae0001e,
-	 0xaf0001e,
-	 0xb00001e,
-	 0xb10001e,
-	 0xb20001e,
-	 0xb30001e,
-	 0xb40001e,
-	 0xb50001e,
-	 0xb60001e,
-	 0xb70001e,
-	 0xb80001e,
-	 0xb90001e,
-	 0xba0001e,
-	 0xbb0001e,
-	 0xbc0001e,
-	 0xbd0001e,
-	 0xbe0001e,
-	 0xbf0001e,
-	 0xc00001e,
-	 0xc10001e,
-	 0xc20001e,
-	 0xc30001e,
-	 0xc40001e,
-	 0xc50001e,
-	 0xc60001e,
-	 0xc70001e,
-	 0xc80001e,
-	 0xc90001e,
-	 0xca0001e,
-	 0xcb0001e,
-	 0xcc0001e,
-	 0xcd0001e,
-	 0xce0001e,
-	 0xcf0001e,
-	 0xd00001e,
-	 0xd10001e,
-	 0xd20001e,
-	 0xd30001e,
-	 0xd40001e,
-	 0xd50001e,
-	 0xd60001e,
-	 0xd70001e,
-	 0xd80001e,
-	 0xd90001e,
-	 0xda0001e,
-	 0xdb0001e,
-	 0xdc0001e,
-	 0xdd0001e,
-	 0xde0001e,
-	 0xdf0001e,
-	 0xe00001e,
-	 0xe10001e,
-	 0xe20001e,
-	 0xe30001e,
-	 0xe40001e,
-	 0xe50001e,
-	 0xe60001e,
-	 0xe70001e,
-	 0xe80001e,
-	 0xe90001e,
-	 0xea0001e,
-	 0xeb0001e,
-	 0xec0001e,
-	 0xed0001e,
-	 0xee0001e,
-	 0xef0001e,
-	 0x400001e		/* default */
-	 }
-};
-
-/* a self contained prom info structure */
-struct leon_reloc_func {
-	struct property *(*find_property) (int node, char *name);
-	int (*strcmp) (char *s1, char *s2);
-	void *(*memcpy) (void *dest, const void *src, size_t n);
-	void (*reboot_physical) (char *cmd);
-	ambapp_dev_apbuart *leon3_apbuart;
-};
-
-struct leon_prom_info {
-	int freq_khz;
-	int leon_nctx;
-	int mids[32];
-	int baudrates[2];
-	struct leon_reloc_func reloc_funcs;
-	struct property root_properties[4];
-	struct property cpu_properties[7];
-#undef  CPUENTRY
-#define CPUENTRY(idx) struct property cpu_properties##idx[4]
-	 CPUENTRY(1);
-	 CPUENTRY(2);
-	 CPUENTRY(3);
-	 CPUENTRY(4);
-	 CPUENTRY(5);
-	 CPUENTRY(6);
-	 CPUENTRY(7);
-	 CPUENTRY(8);
-	 CPUENTRY(9);
-	 CPUENTRY(10);
-	 CPUENTRY(11);
-	 CPUENTRY(12);
-	 CPUENTRY(13);
-	 CPUENTRY(14);
-	 CPUENTRY(15);
-	 CPUENTRY(16);
-	 CPUENTRY(17);
-	 CPUENTRY(18);
-	 CPUENTRY(19);
-	 CPUENTRY(20);
-	 CPUENTRY(21);
-	 CPUENTRY(22);
-	 CPUENTRY(23);
-	 CPUENTRY(24);
-	 CPUENTRY(25);
-	 CPUENTRY(26);
-	 CPUENTRY(27);
-	 CPUENTRY(28);
-	 CPUENTRY(29);
-	 CPUENTRY(30);
-	 CPUENTRY(31);
-	struct idprom idprom;
-	struct linux_nodeops nodeops;
-	struct linux_mlist_v0 *totphys_p;
-	struct linux_mlist_v0 totphys;
-	struct linux_mlist_v0 *avail_p;
-	struct linux_mlist_v0 avail;
-	struct linux_mlist_v0 *prommap_p;
-	void (*synchook) (void);
-	struct linux_arguments_v0 *bootargs_p;
-	struct linux_arguments_v0 bootargs;
-	struct linux_romvec romvec;
-	struct node nodes[35];
-	char s_device_type[12];
-	char s_cpu[4];
-	char s_mid[4];
-	char s_idprom[7];
-	char s_compatability[14];
-	char s_leon2[6];
-	char s_mmu_nctx[9];
-	char s_frequency[16];
-	char s_uart1_baud[11];
-	char s_uart2_baud[11];
-	char arg[256];
-};
-
-/* static prom info */
-static struct leon_prom_info PROM_DATA spi = {
-	CONFIG_SYS_CLK_FREQ / 1000,
-	256,
-	{
-#undef	CPUENTRY
-#define	CPUENTRY(idx) idx
-	 CPUENTRY(0),
-	 CPUENTRY(1),
-	 CPUENTRY(2),
-	 CPUENTRY(3),
-	 CPUENTRY(4),
-	 CPUENTRY(5),
-	 CPUENTRY(6),
-	 CPUENTRY(7),
-	 CPUENTRY(8),
-	 CPUENTRY(9),
-	 CPUENTRY(10),
-	 CPUENTRY(11),
-	 CPUENTRY(12),
-	 CPUENTRY(13),
-	 CPUENTRY(14),
-	 CPUENTRY(15),
-	 CPUENTRY(16),
-	 CPUENTRY(17),
-	 CPUENTRY(18),
-	 CPUENTRY(19),
-	 CPUENTRY(20),
-	 CPUENTRY(21),
-	 CPUENTRY(22),
-	 CPUENTRY(23),
-	 CPUENTRY(24),
-	 CPUENTRY(25),
-	 CPUENTRY(26),
-	 CPUENTRY(27),
-	 CPUENTRY(28),
-	 CPUENTRY(29),
-	 CPUENTRY(30),
-	 31},
-	{38400, 38400},
-	{
-	 __va(find_property),
-	 __va(leon_strcmp),
-	 __va(leon_memcpy),
-	 __phy(leon_reboot_physical),
-	 },
-	{
-	 {__va(spi.s_device_type), __va(spi.s_idprom), 4},
-	 {__va(spi.s_idprom), (char *)__va(&spi.idprom), sizeof(struct idprom)},
-	 {__va(spi.s_compatability), __va(spi.s_leon2), 5},
-	 {NULL, NULL, -1}
-	 },
-	{
-	 {__va(spi.s_device_type), __va(spi.s_cpu), 4},
-	 {__va(spi.s_mid), __va(&spi.mids[0]), 4},
-	 {__va(spi.s_mmu_nctx), (char *)__va(&spi.leon_nctx), 4},
-	 {__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4},
-	 {__va(spi.s_uart1_baud), (char *)__va(&spi.baudrates[0]), 4},
-	 {__va(spi.s_uart2_baud), (char *)__va(&spi.baudrates[1]), 4},
-	 {NULL, NULL, -1}
-	 },
-#undef  CPUENTRY
-#define CPUENTRY(idx) \
-	{ /* cpu_properties */						\
-		{__va(spi.s_device_type), __va(spi.s_cpu), 4},		\
-		{__va(spi.s_mid), __va(&spi.mids[idx]), 4},			\
-		{__va(spi.s_frequency), (char *)__va(&spi.freq_khz), 4},	\
-		{NULL, NULL, -1}						\
-	}
-	CPUENTRY(1),
-	CPUENTRY(2),
-	CPUENTRY(3),
-	CPUENTRY(4),
-	CPUENTRY(5),
-	CPUENTRY(6),
-	CPUENTRY(7),
-	CPUENTRY(8),
-	CPUENTRY(9),
-	CPUENTRY(10),
-	CPUENTRY(11),
-	CPUENTRY(12),
-	CPUENTRY(13),
-	CPUENTRY(14),
-	CPUENTRY(15),
-	CPUENTRY(16),
-	CPUENTRY(17),
-	CPUENTRY(18),
-	CPUENTRY(19),
-	CPUENTRY(20),
-	CPUENTRY(21),
-	CPUENTRY(22),
-	CPUENTRY(23),
-	CPUENTRY(24),
-	CPUENTRY(25),
-	CPUENTRY(26),
-	CPUENTRY(27),
-	CPUENTRY(28),
-	CPUENTRY(29),
-	CPUENTRY(30),
-	CPUENTRY(31),
-	{
-	 0x01,			/* format */
-	 M_LEON2 | M_LEON2_SOC,	/* machine type */
-	 {0, 0, 0, 0, 0, 0},	/* eth */
-	 0,			/* date */
-	 0,			/* sernum */
-	 0,			/* checksum */
-	 {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}	/* reserved */
-	 },
-	{
-	 __va(no_nextnode),
-	 __va(no_child),
-	 __va(no_proplen),
-	 __va(no_getprop),
-	 __va(no_setprop),
-	 __va(no_nextprop)
-	 },
-	__va(&spi.totphys),
-	{
-	 NULL,
-	 (char *)CONFIG_SYS_SDRAM_BASE,
-	 0,
-	 },
-	__va(&spi.avail),
-	{
-	 NULL,
-	 (char *)CONFIG_SYS_SDRAM_BASE,
-	 0,
-	 },
-	NULL,			/* prommap_p */
-	NULL,
-	__va(&spi.bootargs),
-	{
-	 {NULL, __va(spi.arg), NULL /*... */ },
-	 /*... */
-	 },
-	{
-	 0,
-	 0,			/* sun4c v0 prom */
-	 0, 0,
-	 {__va(&spi.totphys_p), __va(&spi.prommap_p), __va(&spi.avail_p)},
-	 __va(&spi.nodeops),
-	 NULL, {NULL /* ... */ },
-	 NULL, NULL,
-	 NULL, NULL,		/* pv_getchar, pv_putchar */
-	 __va(leon_nbgetchar), __va(leon_nbputchar),
-	 NULL,
-	 __va(leon_reboot),
-	 NULL,
-	 NULL,
-	 NULL,
-	 __va(leon_halt),
-	 __va(&spi.synchook),
-	 {NULL},
-	 __va(&spi.bootargs_p)
-	 /*... */
-	 },
-	{
-	 {0, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ },
-	 {0, __va(spi.root_properties)},
-	 /* cpu 0, must be spi.nodes[2] see leon_prom_init() */
-	 {1, __va(spi.cpu_properties)},
-
-#undef  CPUENTRY
-#define CPUENTRY(idx) \
-	  {1, __va(spi.cpu_properties##idx) }	/* cpu <idx> */
-	 CPUENTRY(1),
-	 CPUENTRY(2),
-	 CPUENTRY(3),
-	 CPUENTRY(4),
-	 CPUENTRY(5),
-	 CPUENTRY(6),
-	 CPUENTRY(7),
-	 CPUENTRY(8),
-	 CPUENTRY(9),
-	 CPUENTRY(10),
-	 CPUENTRY(11),
-	 CPUENTRY(12),
-	 CPUENTRY(13),
-	 CPUENTRY(14),
-	 CPUENTRY(15),
-	 CPUENTRY(16),
-	 CPUENTRY(17),
-	 CPUENTRY(18),
-	 CPUENTRY(19),
-	 CPUENTRY(20),
-	 CPUENTRY(21),
-	 CPUENTRY(22),
-	 CPUENTRY(23),
-	 CPUENTRY(24),
-	 CPUENTRY(25),
-	 CPUENTRY(26),
-	 CPUENTRY(27),
-	 CPUENTRY(28),
-	 CPUENTRY(29),
-	 CPUENTRY(30),
-	 CPUENTRY(31),
-	 {-1, __va(spi.root_properties + 3) /* NULL, NULL, -1 */ }
-	 },
-	"device_type",
-	"cpu",
-	"mid",
-	"idprom",
-	"compatability",
-	"leon2",
-	"mmu-nctx",
-	"clock-frequency",
-	"uart1_baud",
-	"uart2_baud",
-	CONFIG_DEFAULT_KERNEL_COMMAND_LINE
-};
-
-/* from arch/sparc/kernel/setup.c */
-#define RAMDISK_LOAD_FLAG 0x4000
-extern unsigned short root_flags;
-extern unsigned short root_dev;
-extern unsigned short ram_flags;
-extern unsigned int sparc_ramdisk_image;
-extern unsigned int sparc_ramdisk_size;
-extern int root_mountflags;
-
-extern char initrd_end, initrd_start;
-
-/* Reboot the CPU = jump to beginning of flash again.
- *
- * Make sure that all function are inlined here.
- */
-static void PROM_TEXT leon_reboot(char *bcommand)
-{
-	register char *arg = bcommand;
-	void __attribute__ ((noreturn)) (*reboot_physical) (char *cmd);
-
-	/* get physical address */
-	struct leon_prom_info *pspi =
-	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	unsigned int *srmmu_ctx_table;
-
-	/* Turn of Interrupts */
-	set_pil(0xf);
-
-	/* Set kernel's context, context zero */
-	srmmu_set_context(0);
-
-	/* Get physical address of the MMU shutdown routine */
-	reboot_physical = (void *)
-	    SPARC_BYPASS_READ(&pspi->reloc_funcs.reboot_physical);
-
-	/* Now that we know the physical address of the function
-	 * we can make the MMU allow jumping to it.
-	 */
-	srmmu_ctx_table = (unsigned int *)srmmu_get_ctable_ptr();
-
-	srmmu_ctx_table = (unsigned int *)SPARC_BYPASS_READ(srmmu_ctx_table);
-
-	/* get physical address of kernel's context table (assume ptd) */
-	srmmu_ctx_table = (unsigned int *)
-	    (((unsigned int)srmmu_ctx_table & 0xfffffffc) << 4);
-
-	/* enable access to physical address of MMU shutdown function */
-	SPARC_BYPASS_WRITE(&srmmu_ctx_table
-			   [((unsigned int)reboot_physical) >> 24],
-			   (((unsigned int)reboot_physical & 0xff000000) >> 4) |
-			   0x1e);
-
-	/* flush TLB cache */
-	leon_flush_tlb_all();
-
-	/* flash instruction & data cache */
-	sparc_icache_flush_all();
-	sparc_dcache_flush_all();
-
-	/* jump to physical address function
-	 * so that when the MMU is disabled
-	 * we can continue to execute
-	 */
-	reboot_physical(arg);
-}
-
-static void PROM_TEXT leon_reboot_physical(char *bcommand)
-{
-	void __attribute__ ((noreturn)) (*reset) (void);
-
-	/* Turn off MMU */
-	srmmu_set_mmureg(0);
-
-	/* Hardcoded start address */
-	reset = CONFIG_SYS_MONITOR_BASE;
-
-	/* flush data cache */
-	sparc_dcache_flush_all();
-
-	/* flush instruction cache */
-	sparc_icache_flush_all();
-
-	/* Jump to start in Flash */
-	reset();
-}
-
-static void PROM_TEXT leon_halt(void)
-{
-	while (1) ;
-}
-
-/* get single char, don't care for blocking*/
-static int PROM_TEXT leon_nbgetchar(void)
-{
-	return -1;
-}
-
-/* put single char, don't care for blocking*/
-static int PROM_TEXT leon_nbputchar(int c)
-{
-	ambapp_dev_apbuart *uart;
-
-	/* get physical address */
-	struct leon_prom_info *pspi =
-	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	uart = (ambapp_dev_apbuart *)
-	    SPARC_BYPASS_READ(&pspi->reloc_funcs.leon3_apbuart);
-
-	/* no UART? */
-	if (!uart)
-		return 0;
-
-	/***** put char in buffer... ***********
-	 * Make sure all functions are inline! *
-	 ***************************************/
-
-	/* Wait for last character to go. */
-	while (!(SPARC_BYPASS_READ(&uart->status)
-		 & APBUART_STATUS_THE));
-
-	/* Send data */
-	SPARC_BYPASS_WRITE(&uart->data, c);
-
-	/* Wait for data to be sent */
-	while (!(SPARC_BYPASS_READ(&uart->status)
-		 & APBUART_STATUS_TSE));
-
-	return 0;
-}
-
-/* node ops */
-
-/*#define nodes ((struct node *)__va(&pspi->nodes))*/
-#define nodes ((struct node *)(pspi->nodes))
-
-static int PROM_TEXT no_nextnode(int node)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi =
-	    (void *)(CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	if (nodes[node].level == nodes[node + 1].level)
-		return node + 1;
-	return -1;
-}
-
-static int PROM_TEXT no_child(int node)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	if (nodes[node].level == nodes[node + 1].level - 1)
-		return node + 1;
-	return -1;
-}
-
-static struct property PROM_TEXT *find_property(int node, char *name)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	struct property *prop = &nodes[node].properties[0];
-	while (prop && prop->name) {
-		if (pspi->reloc_funcs.strcmp(prop->name, name) == 0)
-			return prop;
-		prop++;
-	}
-	return NULL;
-}
-
-static int PROM_TEXT no_proplen(int node, char *name)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	struct property *prop = pspi->reloc_funcs.find_property(node, name);
-	if (prop)
-		return prop->length;
-	return -1;
-}
-
-static int PROM_TEXT no_getprop(int node, char *name, char *value)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	struct property *prop = pspi->reloc_funcs.find_property(node, name);
-	if (prop) {
-		pspi->reloc_funcs.memcpy(value, prop->value, prop->length);
-		return 1;
-	}
-	return -1;
-}
-
-static int PROM_TEXT no_setprop(int node, char *name, char *value, int len)
-{
-	return -1;
-}
-
-static char PROM_TEXT *no_nextprop(int node, char *name)
-{
-	/* get physical address */
-	struct leon_prom_info *pspi = (struct leon_prom_info *)
-	    (CONFIG_SYS_PROM_OFFSET + sizeof(srmmu_tables));
-	struct property *prop;
-
-	/* convert into virtual address */
-	pspi = (struct leon_prom_info *)
-	    (((unsigned int)pspi & 0x0fffffff) | PAGE_OFFSET);
-
-	if (!name || !name[0])
-		return nodes[node].properties[0].name;
-
-	prop = pspi->reloc_funcs.find_property(node, name);
-	if (prop)
-		return prop[1].name;
-	return NULL;
-}
-
-static int PROM_TEXT leon_strcmp(const char *s1, const char *s2)
-{
-	register char result;
-
-	while (1) {
-		result = *s1 - *s2;
-		if (result || !*s1)
-			break;
-		s2++;
-		s1++;
-	}
-
-	return result;
-}
-
-static void *PROM_TEXT leon_memcpy(void *dest, const void *src, size_t n)
-{
-	char *dst = (char *)dest, *source = (char *)src;
-
-	while (n--) {
-		*dst = *source;
-		dst++;
-		source++;
-	}
-	return dest;
-}
-
-#define GETREGSP(sp) __asm__ __volatile__("mov %%sp, %0" : "=r" (sp))
-
-void leon_prom_init(struct leon_prom_info *pspi)
-{
-	unsigned long i;
-	unsigned char cksum, *ptr;
-	char *addr_str, *end;
-	unsigned long sp;
-	GETREGSP(sp);
-
-	pspi->freq_khz = CONFIG_SYS_CLK_FREQ / 1000;
-
-	/* Set Available main memory size */
-	pspi->totphys.num_bytes = CONFIG_SYS_PROM_OFFSET - CONFIG_SYS_SDRAM_BASE;
-	pspi->avail.num_bytes = pspi->totphys.num_bytes;
-
-	/* Set the pointer to the Console UART in romvec */
-	pspi->reloc_funcs.leon3_apbuart = gd->arch.uart;
-
-	{
-		int j = 1;
-#ifdef CONFIG_SMP
-		ambapp_dev_irqmp *b;
-		b = (ambapp_dev_irqmp *) leon3_getapbbase(VENDOR_GAISLER,
-							  GAISLER_IRQMP);
-		if (b) {
-			j = 1 + ((LEON3_BYPASS_LOAD_PA(&(b->mpstatus))
-				  >> LEON3_IRQMPSTATUS_CPUNR) & 0xf);
-		}
-#endif
-#undef nodes
-		pspi->nodes[2 + j].level = -1;
-		pspi->nodes[2 + j].properties = __va(spi.root_properties + 3);
-	}
-
-	/* Set Ethernet MAC address from environment */
-	if ((addr_str = getenv("ethaddr")) != NULL) {
-		for (i = 0; i < 6; i++) {
-			pspi->idprom.id_ethaddr[i] = addr_str ?
-			    simple_strtoul(addr_str, &end, 16) : 0;
-			if (addr_str) {
-				addr_str = (*end) ? end + 1 : end;
-			}
-		}
-	} else {
-		/* HW Address not found in environment,
-		 * Set default HW address
-		 */
-		pspi->idprom.id_ethaddr[0] = 0;
-		pspi->idprom.id_ethaddr[1] = 0;
-		pspi->idprom.id_ethaddr[2] = 0;
-		pspi->idprom.id_ethaddr[3] = 0;
-		pspi->idprom.id_ethaddr[4] = 0;
-		pspi->idprom.id_ethaddr[5] = 0;
-	}
-
-	ptr = (unsigned char *)&pspi->idprom;
-	for (i = cksum = 0; i <= 0x0E; i++)
-		cksum ^= *ptr++;
-	pspi->idprom.id_cksum = cksum;
-}
-
-static inline void set_cache(unsigned long regval)
-{
-	asm volatile ("sta %0, [%%g0] %1\n\t":: "r" (regval), "i"(2):"memory");
-}
-
-extern unsigned short bss_start, bss_end;
-
-/* mark as section .img.main.text, to be referenced in linker script */
-int prom_init(void)
-{
-	struct leon_prom_info *pspi = (void *)
-	    ((((unsigned int)&spi) & PROM_SIZE_MASK) + CONFIG_SYS_PROM_OFFSET);
-
-	/* disable mmu */
-	srmmu_set_mmureg(0x00000000);
-	__asm__ __volatile__("flush\n\t");
-
-	/* init prom info struct */
-	leon_prom_init(pspi);
-
-	kernel_arg_promvec = &pspi->romvec;
-#ifdef PRINT_ROM_VEC
-	printf("Kernel rom vec: 0x%lx\n", (unsigned int)(&pspi->romvec));
-#endif
-	return 0;
-}
-
-/* Copy current kernel boot argument to ROMvec */
-void prepare_bootargs(char *bootargs)
-{
-	struct leon_prom_info *pspi;
-	char *src, *dst;
-	int left;
-
-	/* if no bootargs set, skip copying ==> default bootline */
-	if (bootargs && (*bootargs != '\0')) {
-		pspi = (void *)((((unsigned int)&spi) & PROM_SIZE_MASK) +
-				CONFIG_SYS_PROM_OFFSET);
-		src = bootargs;
-		dst = &pspi->arg[0];
-		left = 255;	/* max len */
-		while (*src && left > 0) {
-			*dst++ = *src++;
-			left--;
-		}
-		/* terminate kernel command line string */
-		*dst = 0;
-	}
-}
-
-void srmmu_init_cpu(unsigned int entry)
-{
-	sparc_srmmu_setup *psrmmu_tables = (void *)
-	    ((((unsigned int)&srmmu_tables) & PROM_SIZE_MASK) +
-	     CONFIG_SYS_PROM_OFFSET);
-
-	/* Make context 0 (kernel's context) point
-	 * to our prepared memory mapping
-	 */
-#define PTD 1
-	psrmmu_tables->ctx_table[0] =
-	    ((unsigned int)&psrmmu_tables->pgd_table[0x00]) >> 4 | PTD;
-
-	/* Set virtual kernel address 0xf0000000
-	 * to SRAM/SDRAM address.
-	 * Make it READ/WRITE/EXEC to SuperUser
-	 */
-#define PTE 2
-#define ACC_SU_ALL 0x1c
-	psrmmu_tables->pgd_table[0xf0] =
-	    (CONFIG_SYS_SDRAM_BASE >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf1] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x1000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf2] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x2000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf3] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x3000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf4] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x4000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf5] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x5000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf6] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x6000000) >> 4) | ACC_SU_ALL | PTE;
-	psrmmu_tables->pgd_table[0xf7] =
-	    ((CONFIG_SYS_SDRAM_BASE + 0x7000000) >> 4) | ACC_SU_ALL | PTE;
-
-	/* convert rom vec pointer to virtual address */
-	kernel_arg_promvec = (struct linux_romvec *)
-	    (((unsigned int)kernel_arg_promvec & 0x0fffffff) | 0xf0000000);
-
-	/* Set Context pointer to point to context table
-	 * 256 contexts supported.
-	 */
-	srmmu_set_ctable_ptr((unsigned int)&psrmmu_tables->ctx_table[0]);
-
-	/* Set kernel's context, context zero */
-	srmmu_set_context(0);
-
-	/* Invalidate all Cache */
-	__asm__ __volatile__("flush\n\t");
-
-	srmmu_set_mmureg(0x00000001);
-	leon_flush_tlb_all();
-	leon_flush_cache_all();
-}
diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c
deleted file mode 100644
index bc6e7a172e5f..000000000000
--- a/arch/sparc/cpu/leon3/serial.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/* GRLIB APBUART Serial controller driver
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <ambapp.h>
-#include <grlib/apbuart.h>
-#include <serial.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Select which UART that will become u-boot console */
-#ifndef CONFIG_SYS_GRLIB_APBUART_INDEX
-/* Try to use CONFIG_CONS_INDEX, if available, it is numbered from 1 */
-#ifdef CONFIG_CONS_INDEX
-#define CONFIG_SYS_GRLIB_APBUART_INDEX (CONFIG_CONS_INDEX - 1)
-#else
-#define CONFIG_SYS_GRLIB_APBUART_INDEX 0
-#endif
-#endif
-
-static unsigned apbuart_calc_scaler(unsigned apbuart_freq, unsigned baud)
-{
-	return (((apbuart_freq * 10) / (baud * 8)) - 5) / 10;
-}
-
-static int leon3_serial_init(void)
-{
-	ambapp_dev_apbuart *uart;
-	ambapp_apbdev apbdev;
-	unsigned int tmp;
-
-	/* find UART */
-	if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_APBUART,
-		CONFIG_SYS_GRLIB_APBUART_INDEX, &apbdev) != 1) {
-		gd->flags &= ~GD_FLG_SERIAL_READY;
-		panic("%s: apbuart not found!\n", __func__);
-		return -1; /* didn't find hardware */
-	}
-
-	/* found apbuart, let's init .. */
-	uart = (ambapp_dev_apbuart *) apbdev.address;
-
-	/* APBUART Frequency is equal to bus frequency */
-	gd->arch.uart_freq = ambapp_bus_freq(&ambapp_plb, apbdev.ahb_bus_index);
-
-	/* Set scaler / baud rate */
-	tmp = apbuart_calc_scaler(gd->arch.uart_freq, CONFIG_BAUDRATE);
-	writel(tmp, &uart->scaler);
-
-	/* Let bit 11 be unchanged (debug bit for GRMON) */
-	tmp = readl(&uart->ctrl) & APBUART_CTRL_DBG;
-	/* Receiver & transmitter enable */
-	tmp |= APBUART_CTRL_RE | APBUART_CTRL_TE;
-	writel(tmp, &uart->ctrl);
-
-	gd->arch.uart = uart;
-	return 0;
-}
-
-static inline ambapp_dev_apbuart *leon3_get_uart_regs(void)
-{
-	ambapp_dev_apbuart *uart = gd->arch.uart;
-	return uart;
-}
-
-static void leon3_serial_putc_raw(const char c)
-{
-	ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
-
-	if (!uart)
-		return;
-
-	/* Wait for last character to go. */
-	while (!(readl(&uart->status) & APBUART_STATUS_THE))
-		WATCHDOG_RESET();
-
-	/* Send data */
-	writel(c, &uart->data);
-
-#ifdef LEON_DEBUG
-	/* Wait for data to be sent */
-	while (!(readl(&uart->status) & APBUART_STATUS_TSE))
-		WATCHDOG_RESET();
-#endif
-}
-
-static void leon3_serial_putc(const char c)
-{
-	if (c == '\n')
-		leon3_serial_putc_raw('\r');
-
-	leon3_serial_putc_raw(c);
-}
-
-static int leon3_serial_getc(void)
-{
-	ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
-
-	if (!uart)
-		return 0;
-
-	/* Wait for a character to arrive. */
-	while (!(readl(&uart->status) & APBUART_STATUS_DR))
-		WATCHDOG_RESET();
-
-	/* Read character data */
-	return readl(&uart->data);
-}
-
-static int leon3_serial_tstc(void)
-{
-	ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
-
-	if (!uart)
-		return 0;
-
-	return readl(&uart->status) & APBUART_STATUS_DR;
-}
-
-/* set baud rate for uart */
-static void leon3_serial_setbrg(void)
-{
-	ambapp_dev_apbuart * const uart = leon3_get_uart_regs();
-	unsigned int scaler;
-
-	if (!uart)
-		return;
-
-	if (!gd->baudrate)
-		gd->baudrate = CONFIG_BAUDRATE;
-
-	if (!gd->arch.uart_freq)
-		gd->arch.uart_freq = CONFIG_SYS_CLK_FREQ;
-
-	scaler = apbuart_calc_scaler(gd->arch.uart_freq, gd->baudrate);
-
-	writel(scaler, &uart->scaler);
-}
-
-static struct serial_device leon3_serial_drv = {
-	.name	= "leon3_serial",
-	.start	= leon3_serial_init,
-	.stop	= NULL,
-	.setbrg	= leon3_serial_setbrg,
-	.putc	= leon3_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= leon3_serial_getc,
-	.tstc	= leon3_serial_tstc,
-};
-
-void leon3_serial_initialize(void)
-{
-	serial_register(&leon3_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &leon3_serial_drv;
-}
-
-#ifdef CONFIG_DEBUG_UART_APBUART
-
-#include <debug_uart.h>
-
-static inline void _debug_uart_init(void)
-{
-	ambapp_dev_apbuart *uart = (ambapp_dev_apbuart *)CONFIG_DEBUG_UART_BASE;
-	uart->scaler = apbuart_calc_scaler(CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE);
-	uart->ctrl = APBUART_CTRL_RE | APBUART_CTRL_TE;
-}
-
-static inline void _debug_uart_putc(int ch)
-{
-	ambapp_dev_apbuart *uart = (ambapp_dev_apbuart *)CONFIG_DEBUG_UART_BASE;
-	while (!(readl(&uart->status) & APBUART_STATUS_THE))
-		WATCHDOG_RESET();
-	writel(ch, &uart->data);
-}
-
-DEBUG_UART_FUNCS
-
-#endif
diff --git a/arch/sparc/cpu/leon3/start.S b/arch/sparc/cpu/leon3/start.S
deleted file mode 100644
index 1527d72a6d79..000000000000
--- a/arch/sparc/cpu/leon3/start.S
+++ /dev/null
@@ -1,681 +0,0 @@
-/* This is where the SPARC/LEON3 starts
- *
- * Copyright (C) 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/asmmacro.h>
-#include <asm/winmacro.h>
-#include <asm/psr.h>
-#include <asm/stack.h>
-#include <asm/leon.h>
-#include <ambapp.h>
-
-/* Default Plug&Play I/O area */
-#ifndef CONFIG_AMBAPP_IOAREA
-#define CONFIG_AMBAPP_IOAREA AMBA_DEFAULT_IOAREA
-#endif
-
-/* Default number of SPARC register windows */
-#ifndef CONFIG_SYS_SPARC_NWINDOWS
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-#endif
-
-/* Entry for traps which jump to a programmer-specified trap handler.  */
-#define TRAPR(H)  \
-	wr	%g0, 0xfe0, %psr; \
-	mov	%g0, %tbr; \
-	ba	(H); \
-	mov	%g0, %wim;
-
-#define TRAP(H) \
-	mov	%psr, %l0; \
-	ba	(H); \
-	nop; nop;
-
-#define TRAPI(ilevel) \
-	mov	ilevel, %l7; \
-	mov	%psr, %l0; \
-	b	_irq_entry; \
-	mov	%wim, %l3
-
-/* Unexcpected trap will halt the processor by forcing it to error state */
-#undef BAD_TRAP
-#define BAD_TRAP ta 0; nop; nop; nop;
-
-/* Software trap. Treat as BAD_TRAP for the time being... */
-#define SOFT_TRAP TRAP(_hwerr)
-
-#define PSR_INIT   0x1FC0	/* Disable traps, set s and ps */
-#define WIM_INIT   2
-
-/* All traps low-level code here must end with this macro. */
-#define RESTORE_ALL b ret_trap_entry; clr %l6;
-
-#define WRITE_PAUSE nop;nop;nop
-
-WINDOWSIZE = (16 * 4)
-ARGPUSHSIZE = (6 * 4)
-ARGPUSH = (WINDOWSIZE + 4)
-MINFRAME = (WINDOWSIZE + ARGPUSHSIZE + 4)
-
-/* Number of register windows */
-#ifndef CONFIG_SYS_SPARC_NWINDOWS
-#error Must define number of SPARC register windows, default is 8
-#endif
-
-/* Macros to load address into a register. Uses GOT table for PIC */
-#ifdef __PIC__
-
-#define SPARC_PIC_THUNK_CALL(reg) \
-	sethi	%pc22(_GLOBAL_OFFSET_TABLE_-4), %##reg; \
-	call	__sparc_get_pc_thunk.reg; \
-	 add	%##reg, %pc10(_GLOBAL_OFFSET_TABLE_+4), %##reg;
-
-#define SPARC_LOAD_ADDRESS(sym, got, reg) \
-	sethi	%gdop_hix22(sym), %##reg; \
-	xor	%##reg, %gdop_lox10(sym), %##reg; \
-	ld	[%##got + %##reg], %##reg, %gdop(sym);
-
-#else
-
-#define SPARC_PIC_THUNK_CALL(reg)
-#define SPARC_LOAD_ADDRESS(sym, got, tmp) \
-	set	sym, %##reg;
-
-#endif
-
-#define STACK_ALIGN	8
-#define SA(X)	(((X)+(STACK_ALIGN-1)) & ~(STACK_ALIGN-1))
-
-	.section ".start", "ax"
-	.globl	_start, start, _trap_table
-	.globl  _irq_entry, nmi_trap
-	.globl  _reset_reloc
-
-/* at address 0
- * Hardware traps
- */
-start:
-_start:
-_trap_table:
-	TRAPR(_hardreset);		! 00 reset trap
-	BAD_TRAP;			! 01 instruction_access_exception
-	BAD_TRAP;			! 02 illegal_instruction
-	BAD_TRAP;			! 03 priveleged_instruction
-	BAD_TRAP;			! 04 fp_disabled
-	TRAP(_window_overflow);		! 05 window_overflow
-	TRAP(_window_underflow);	! 06 window_underflow
-	BAD_TRAP;			! 07 Memory Address Not Aligned
-	BAD_TRAP;			! 08 Floating Point Exception
-	BAD_TRAP;			! 09 Data Miss Exception
-	BAD_TRAP;			! 0a Tagged Instruction Ovrflw
-	BAD_TRAP;			! 0b Watchpoint Detected
-	BAD_TRAP;			! 0c
-	BAD_TRAP;			! 0d
-	BAD_TRAP;			! 0e
-	BAD_TRAP;			! 0f
-	BAD_TRAP;			! 10
-	TRAPI(1);			! 11 IRQ level 1
-	TRAPI(2);			! 12 IRQ level 2
-	TRAPI(3);			! 13 IRQ level 3
-	TRAPI(4);			! 14 IRQ level 4
-	TRAPI(5);			! 15 IRQ level 5
-	TRAPI(6);			! 16 IRQ level 6
-	TRAPI(7);			! 17 IRQ level 7
-	TRAPI(8);			! 18 IRQ level 8
-	TRAPI(9);			! 19 IRQ level 9
-	TRAPI(10);			! 1a IRQ level 10
-	TRAPI(11);			! 1b IRQ level 11
-	TRAPI(12);			! 1c IRQ level 12
-	TRAPI(13);			! 1d IRQ level 13
-	TRAPI(14);			! 1e IRQ level 14
-	TRAP(_nmi_trap);		! 1f IRQ level 15 /
-					! NMI (non maskable interrupt)
-	BAD_TRAP;			! 20 r_register_access_error
-	BAD_TRAP;			! 21 instruction access error
-	BAD_TRAP;			! 22
-	BAD_TRAP;			! 23
-	BAD_TRAP;			! 24 co-processor disabled
-	BAD_TRAP;			! 25 uniplemented FLUSH
-	BAD_TRAP;			! 26
-	BAD_TRAP;			! 27
-	BAD_TRAP;			! 28 co-processor exception
-	BAD_TRAP;			! 29 data access error
-	BAD_TRAP;			! 2a division by zero
-	BAD_TRAP;			! 2b data store error
-	BAD_TRAP;			! 2c data access MMU miss
-	BAD_TRAP;			! 2d
-	BAD_TRAP;			! 2e
-	BAD_TRAP;			! 2f
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 30-33
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 34-37
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 38-3b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 3c-3f
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 40-43
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 44-47
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 48-4b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 4c-4f
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 50-53
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 54-57
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 58-5b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 5c-5f
-
-	/* implementaion dependent */
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 60-63
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 64-67
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 68-6b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 6c-6f
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 70-73
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 74-77
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 78-7b
-	BAD_TRAP; BAD_TRAP; BAD_TRAP; BAD_TRAP; ! 7c-7f
-
-	/* Software traps, not handled */
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 80-83
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 84-87
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 88-8b
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 8c-8f
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 90-93
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 94-97
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 98-9b
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! 9c-9f
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! a0-a3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! a4-a7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! a8-ab
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! ac-af
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! b0-b3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! b4-b7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! b8-bb
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! bc-bf
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! c0-c3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! c4-c7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! c8-cb
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! cc-cf
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! d0-d3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! d4-d7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! d8-db
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! dc-df
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! e0-e3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! e4-e7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! e8-eb
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! ec-ef
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! f0-f3
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! f4-f7
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! f8-fb
-	SOFT_TRAP; SOFT_TRAP; SOFT_TRAP; SOFT_TRAP;	! fc-ff
-
-	.section	".text"
-	.extern	_nomem_amba_init, _nomem_memory_ctrl_init
-	.align 4
-
-_hardreset:
-1000:
-	flush
-
-	/* Enable I/D-Cache and Snooping */
-	set	0x0081000f, %g2
-	sta	%g2, [%g0] 2
-
-	mov	%g0, %y
-	clr	%g1
-	clr	%g2
-	clr	%g3
-	clr	%g4
-	clr	%g5
-	clr	%g6
-	clr	%g7
-
-	mov	%asr17, %g3
-	and	%g3, 0x1f, %g3
-clear_window:
-	mov	%g0, %l0
-	mov	%g0, %l1
-	mov	%g0, %l2
-	mov	%g0, %l3
-	mov	%g0, %l4
-	mov	%g0, %l5
-	mov	%g0, %l6
-	mov	%g0, %l7
-	mov	%g0, %o0
-	mov	%g0, %o1
-	mov	%g0, %o2
-	mov	%g0, %o3
-	mov	%g0, %o4
-	mov	%g0, %o5
-	mov	%g0, %o6
-	mov	%g0, %o7
-	subcc	%g3, 1, %g3
-	bge	clear_window
-	save
-
-wiminit:
-	set	WIM_INIT, %g3
-	mov	%g3, %wim
-
-stackinit:
-	set	CONFIG_SYS_INIT_SP_OFFSET, %fp
-	andn	%fp, 0x0f, %fp
-	sub	%fp, 64, %sp
-
-tbrinit:
-	set	CONFIG_SYS_TEXT_BASE, %g2
-	wr	%g0, %g2, %tbr
-	nop
-	nop
-	nop
-
-/* Obtain the address of _GLOBAL_OFFSET_TABLE_ */
-	SPARC_PIC_THUNK_CALL(l7)
-
-/* Scan AMBA Bus for AMBA buses using PnP information. All found
- * AMBA buses I/O area will be located in i0-i5 upon return.
- * The i0-i5 registers are later used by _nomem_amba_init2
- */
-ambainit:
-	call	_nomem_amba_init
-	 sethi	%hi(CONFIG_AMBAPP_IOAREA), %o0
-
-/* Scan AMBA Buses for memory controllers, then initialize the
- * memory controllers. Note that before setting up the memory controller
- * the stack can not be used.
- */
-memory_ctrl_init:
-	SPARC_LOAD_ADDRESS(grlib_mctrl_handlers, l7, o0)
-
-	call	_nomem_memory_ctrl_init
-	 nop
-
-/* The return valu indicate how many memory controllers where found and
- * initialized, if no memory controller was initialized, we can not continue
- * because from here on we expect memory to be working.
- */
-	cmp	%o0, 0
-memory_ctrl_init_failed:
-	beq	memory_ctrl_init_failed
-	 nop
-
-/*** From now on the stack can be used. ***/
-
-cpu_init_unreloc:
-	call	cpu_init_f
-	 nop
-
-board_init_unreloc:
-	call	board_init_f
-	 clr	%o0			! boot_flags
-
-dead_unreloc:
-	mov	1, %g1			! For GRMON2 to exit normally.
-	ta 0				! If board_init_f call returns.. (unlikely)
-	 nop
-	nop
-	ba	dead_unreloc		! infinte loop
-	 nop
-
-!-------------------------------------------------------------------------------
-
-/* void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM after
- * relocating the monitor code.
- *
- * %o0 = Relocated stack pointer
- * %o1 = Relocated global data pointer
- * %o2 = Relocated text pointer
- *
- * %l7 = _GLOBAL_OFFSET_TABLE_ address
- */
-	.globl	relocate_code
-	.type	relocate_code, #function
-	.align	4
-relocate_code:
-	!SPARC_PIC_THUNK_CALL(l7)
-reloc:
-	SPARC_LOAD_ADDRESS(_text, l7, g2)	! start address of monitor
-	SPARC_LOAD_ADDRESS(__init_end, l7, g3)	! end address of monitor
-	mov	%o2, %g4		! relocation address
-	sub	%g4, %g2, %g6		! relocation offset
-	/* copy .text & .data to relocated address */
-10:	ldd	[%g2], %l0
-	ldd	[%g2+8], %l2
-	std	%l0, [%g4]
-	std	%l2, [%g4+8]
-	inc	16, %g2			! src += 16
-	cmp	%g2, %g3
-	bcs	10b			! while (src < end)
-	 inc	16, %g4			! dst += 16
-
-	clr	%l0
-	clr	%l1
-	clr	%l2
-	clr	%l3
-	clr	%g2
-
-/* register g4 contain address to start
- * This means that BSS must be directly after data and code segments
- *
- * g3 is length of bss = (__bss_end-__bss_start)
- *
- */
-
-	/* clear the relocated .bss area */
-clr_bss:
-	SPARC_LOAD_ADDRESS(__bss_start, l7, g2)
-	SPARC_LOAD_ADDRESS(__bss_end, l7, g3)
-	sub	%g3,%g2,%g3		! length of .bss area
-	add	%g3,%g4,%g3
-	/* clearing 16byte a time ==> linker script need to align to 16 byte offset */
-	clr	%g1	/* std %g0 uses g0 and g1 */
-20:
-	std	%g0, [%g4]
-	std	%g0, [%g4+8]
-	inc	16, %g4			! ptr += 16
-	cmp	%g4, %g3
-	bcs	20b			! while (ptr < end)
-	 nop
-
-	/* add offsets to GOT table */
-fixup_got:
-	SPARC_LOAD_ADDRESS(__got_start, l7, g4)
-	add	%g4, %g6, %g4
-	SPARC_LOAD_ADDRESS(__got_end, l7, g3)
-	add	%g3, %g6, %g3
-30:	ld	[%g4], %l0
-#ifdef CONFIG_RELOC_GOT_SKIP_NULL
-	cmp	%l0, 0
-	be	32f
-#endif
-	add	%l0, %g6, %l0		! relocate GOT pointer
-	st	%l0, [%g4]
-32:	inc	4, %g4			! ptr += 4
-	cmp	%g4, %g3
-	bcs	30b			! while (ptr < end)
-	 nop
-
-prom_relocate:
-	SPARC_LOAD_ADDRESS(__prom_start, l7, g2)
-	SPARC_LOAD_ADDRESS(__prom_end, l7, g3)
-	/*
-	 * Calculated addres is stored in this variable by
-	 * reserve_prom() function in common/board_f.c
-	 */
-	SPARC_LOAD_ADDRESS(__prom_start_reloc, l7, g4)
-	ld	[%g4], %g4
-
-40:	ldd	[%g2], %l0
-	ldd	[%g2+8], %l2
-	std	%l0, [%g4]
-	std	%l2, [%g4+8]
-	inc	16, %g2
-	cmp	%g2, %g3
-	bcs	40b
-	 inc	16, %g4
-
-! %o0 = stack pointer (relocated)
-! %o1 = global data pointer (relocated)
-! %o2 = text pointer (relocated)
-
-! %g6 = relocation offset
-! %l7 = _GLOBAL_OFFSET_TABLE_
-
-/* Trap table has been moved, lets tell CPU about
- * the new trap table address
- */
-update_trap_table_address:
-	wr	%g0, %o2, %tbr
-	nop
-	nop
-	nop
-
-update_stack_pointers:
-	mov	%o0, %fp
-	andn	%fp, 0x0f, %fp	! align to 16 bytes
-	add	%fp, -64, %fp	! make space for a window push
-	mov	%fp, %sp	! setup stack pointer
-
-jump_board_init_r:
-	mov	%o1, %o0	! relocated global data pointer
-	mov	%o2, %o1	! relocated text pointer
-	SPARC_LOAD_ADDRESS(board_init_r, l7, o3)
-	add	%o3, %g6, %o3	! add relocation offset
-	call	%o3
-	 nop
-
-dead:
-	mov	1, %g1			! For GRMON2 to exit normally.
-	ta 0				! if call returns.. (unlikely)
-	 nop
-	b	dead			! infinte loop
-	 nop
-
-!------------------------------------------------------------------------------
-
-/* Interrupt handler caller,
- * reg L7: interrupt number
- * reg L0: psr after interrupt
- * reg L1: PC
- * reg L2: next PC
- * reg L3: wim
- */
-_irq_entry:
-	SAVE_ALL
-
-	or	%l0, PSR_PIL, %g2
-	wr	%g2, 0x0, %psr
-	WRITE_PAUSE
-	wr	%g2, PSR_ET, %psr
-	WRITE_PAUSE
-	mov	%l7, %o0		! irq level
-	set	handler_irq, %o1
-	set	(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2
-	add	%o1, %o2, %o1
-	call	%o1
-	add	%sp, SF_REGS_SZ, %o1	! pt_regs ptr
-	or	%l0, PSR_PIL, %g2	! restore PIL after handler_irq
-	wr	%g2, PSR_ET, %psr	! keep ET up
-	WRITE_PAUSE
-
-	RESTORE_ALL
-
-!------------------------------------------------------------------------------
-
-/*
- * Window overflow trap handler
- */
-	.global _window_overflow
-
-_window_overflow:
-
-	mov	%wim, %l3		! Calculate next WIM
-	mov     %g1, %l7
-	srl     %l3, 1, %g1
-	sll	%l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l4
-	or      %g1, %l4, %g1
-	save				! Get into window to be saved.
-	mov     %g1, %wim
-	nop; nop; nop
-	st      %l0, [%sp + 0]		! Save window to the stack
-	st      %l1, [%sp + 4]
-	st      %l2, [%sp + 8]
-	st      %l3, [%sp + 12]
-	st      %l4, [%sp + 16]
-	st      %l5, [%sp + 20]
-	st      %l6, [%sp + 24]
-	st      %l7, [%sp + 28]
-	st      %i0, [%sp + 32]
-	st      %i1, [%sp + 36]
-	st      %i2, [%sp + 40]
-	st      %i3, [%sp + 44]
-	st      %i4, [%sp + 48]
-	st      %i5, [%sp + 52]
-	st      %i6, [%sp + 56]
-	st      %i7, [%sp + 60]
-	restore				! Go back to trap window.
-	mov     %l7, %g1
-	jmp	%l1			! Re-execute save.
-	 rett	%l2
-
-/*
- * Window underflow trap handler
- */
-	.global  _window_underflow
-
-_window_underflow:
-
-	mov	%wim, %l3		! Calculate next WIM
-	srl	%l3, (CONFIG_SYS_SPARC_NWINDOWS-1), %l5
-	sll	%l3, 1, %l4
-	or	%l5, %l4, %l5
-	mov 	%l5, %wim
-	nop; nop; nop
-	restore				! Two restores to get into the
-	restore				! window to restore
-	ld	[%sp + 0], %l0;		! Restore window from the stack
-	ld	[%sp + 4], %l1;
-	ld	[%sp + 8], %l2;
-	ld	[%sp + 12], %l3;
-	ld	[%sp + 16], %l4;
-	ld	[%sp + 20], %l5;
-	ld	[%sp + 24], %l6;
-	ld	[%sp + 28], %l7;
-	ld	[%sp + 32], %i0;
-	ld	[%sp + 36], %i1;
-	ld	[%sp + 40], %i2;
-	ld	[%sp + 44], %i3;
-	ld	[%sp + 48], %i4;
-	ld	[%sp + 52], %i5;
-	ld	[%sp + 56], %i6;
-	ld	[%sp + 60], %i7;
-	save				! Get back to the trap window.
-	save
-	jmp	%l1			! Re-execute restore.
-	 rett	%l2
-
-!------------------------------------------------------------------------------
-
-_nmi_trap:
-	nop
-	jmp %l1
-	rett %l2
-
-_hwerr:
-	ta 0
-	nop
-	nop
-	b _hwerr			! loop infinite
-	nop
-
-/* Registers to not touch at all. */
-#define t_psr      l0 /* Set by caller */
-#define t_pc       l1 /* Set by caller */
-#define t_npc      l2 /* Set by caller */
-#define t_wim      l3 /* Set by caller */
-#define t_twinmask l4 /* Set at beginning of this entry routine. */
-#define t_kstack   l5 /* Set right before pt_regs frame is built */
-#define t_retpc    l6 /* If you change this, change winmacro.h header file */
-#define t_systable l7 /* Never touch this, could be the syscall table ptr. */
-#define curptr     g6 /* Set after pt_regs frame is built */
-
-trap_setup:
-/* build a pt_regs trap frame. */
-	sub	%fp, (SF_REGS_SZ + PT_REGS_SZ), %t_kstack
-	PT_STORE_ALL(t_kstack, t_psr, t_pc, t_npc, g2)
-
-	/* See if we are in the trap window. */
-	mov	1, %t_twinmask
-	sll	%t_twinmask, %t_psr, %t_twinmask ! t_twinmask = (1 << psr)
-	andcc	%t_twinmask, %t_wim, %g0
-	beq	1f		! in trap window, clean up
-	nop
-
-	/*-------------------------------------------------
-	 * Spill , adjust %wim and go.
-	 */
-	srl	%t_wim, 0x1, %g2		! begin computation of new %wim
-
-	set	(CONFIG_SYS_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
-
-	sll	%t_wim, %g3, %t_wim	! NWINDOWS-1
-	or	%t_wim, %g2, %g2
-	and	%g2, 0xff, %g2
-
-	save	%g0, %g0, %g0           ! get in window to be saved
-
-	/* Set new %wim value */
-	wr	%g2, 0x0, %wim
-
-	/* Save the kernel window onto the corresponding stack. */
-	RW_STORE(sp)
-
-	restore	%g0, %g0, %g0
-	/*-------------------------------------------------*/
-
-1:
-	/* Trap from kernel with a window available.
-	 * Just do it...
-	 */
-	jmpl	%t_retpc + 0x8, %g0	! return to caller
-	 mov	%t_kstack, %sp		! jump onto new stack
-
-#define twin_tmp1 l4
-#define glob_tmp  g4
-#define curptr    g6
-ret_trap_entry:
-	wr	%t_psr, 0x0, %psr       ! enable nesting again, clear ET
-
-	/* Will the rett land us in the invalid window? */
-	mov	2, %g1
-	sll	%g1, %t_psr, %g1
-
-	set	CONFIG_SYS_SPARC_NWINDOWS, %g2	!NWINDOWS
-
-	srl	%g1, %g2, %g2
-	or	%g1, %g2, %g1
-	rd	%wim, %g2
-	andcc	%g2, %g1, %g0
-	be	1f		! Nope, just return from the trap
-	 sll	%g2, 0x1, %g1
-
-	/* We have to grab a window before returning. */
-	set	(CONFIG_SYS_SPARC_NWINDOWS-1), %g3	!NWINDOWS-1
-
-	srl	%g2, %g3,  %g2
-	or	%g1, %g2, %g1
-	and	%g1, 0xff, %g1
-
-	wr	%g1, 0x0, %wim
-
-	/* Grrr, make sure we load from the right %sp... */
-	PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
-
-	restore	%g0, %g0, %g0
-	RW_LOAD(sp)
-	b	2f
-	save	%g0, %g0, %g0
-
-	/* Reload the entire frame in case this is from a
-	 * kernel system call or whatever...
-	 */
-1:
-	PT_LOAD_ALL(sp, t_psr, t_pc, t_npc, g1)
-2:
-	wr	%t_psr, 0x0, %psr
-	nop;
-	nop;
-	nop
-
-	jmp	%t_pc
-	rett	%t_npc
-
-/* This is called from relocated C-code.
- * It resets the system by jumping to _start
- */
-_reset_reloc:
-	set	start, %l0
-	call	%l0
-	nop
diff --git a/arch/sparc/cpu/leon3/usb_uhci.c b/arch/sparc/cpu/leon3/usb_uhci.c
deleted file mode 100644
index 67bd1241bd27..000000000000
--- a/arch/sparc/cpu/leon3/usb_uhci.c
+++ /dev/null
@@ -1,1195 +0,0 @@
-/*
- * Part of this code has been derived from linux:
- * Universal Host Controller Interface driver for USB (take II).
- *
- * (c) 1999-2001 Georg Acher, acher at in.tum.de (executive slave) (base guitar)
- *               Deti Fliegl, deti at fliegl.de (executive slave) (lead voice)
- *               Thomas Sailer, sailer at ife.ee.ethz.ch (chief consultant) (cheer leader)
- *               Roman Weissgaerber, weissg at vienna.at (virt root hub) (studio porter)
- * (c) 2000      Yggdrasil Computing, Inc. (port of new PCI interface support
- *               from usb-ohci.c by Adam Richter, adam at yggdrasil.com).
- * (C) 2000      David Brownell, david-b at pacbell.net (usb-ohci.c)
- *
- * HW-initalization based on material of
- *
- * (C) Copyright 1999 Linus Torvalds
- * (C) Copyright 1999 Johannes Erdfelt
- * (C) Copyright 1999 Randy Dunlap
- * (C) Copyright 1999 Gregory P. Smith
- *
- *
- * Adapted for U-Boot:
- * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
- * (C) Copyright 2008, Daniel Hellström, daniel at gaisler.com
- *     Added AMBA Plug&Play detection of GRUSB, modified interrupt handler.
- *     Added cache flushes where needed.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/**********************************************************************
- * How it works:
- * -------------
- * The framelist / Transfer descriptor / Queue Heads are similar like
- * in the linux usb_uhci.c.
- *
- * During initialization, the following skeleton is allocated in init_skel:
- *
- *         framespecific           |           common chain
- *
- * framelist[]
- * [  0 ]-----> TD ---------\
- * [  1 ]-----> TD ----------> TD ------> QH -------> QH -------> QH ---> NULL
- *   ...        TD ---------/
- * [1023]-----> TD --------/
- *
- *              ^^             ^^         ^^          ^^          ^^
- *              7 TDs for      1 TD for   Start of    Start of    End Chain
- *              INT (2-128ms)  1ms-INT    CTRL Chain  BULK Chain
- *
- *
- * Since this is a bootloader, the isochronous transfer descriptor have been removed.
- *
- * Interrupt Transfers.
- * --------------------
- * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They
- * will be inserted after the appropriate (depending the interval setting) skeleton TD.
- * If an interrupt has been detected the dev->irqhandler is called. The status and number
- * of transferred bytes is stored in dev->irq_status resp. dev->irq_act_len. If the
- * dev->irqhandler returns 0, the interrupt TD is removed and disabled. If an 1 is returned,
- * the interrupt TD will be reactivated.
- *
- * Control Transfers
- * -----------------
- * Control Transfers are issued by filling the tmp_td with the appropriate data and connect
- * them to the qh_cntrl queue header. Before other control/bulk transfers can be issued,
- * the programm has to wait for completion. This does not allows asynchronous data transfer.
- *
- * Bulk Transfers
- * --------------
- * Bulk Transfers are issued by filling the tmp_td with the appropriate data and connect
- * them to the qh_bulk queue header. Before other control/bulk transfers can be issued,
- * the programm has to wait for completion. This does not allows asynchronous data transfer.
- *
- *
- */
-
-#include <common.h>
-#include <ambapp.h>
-#include <asm/leon.h>
-#include <asm/leon3.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_USB_UHCI
-
-#include <usb.h>
-#include "usb_uhci.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define USB_MAX_TEMP_TD      128	/* number of temporary TDs for bulk and control transfers */
-#define USB_MAX_TEMP_INT_TD  32	/* number of temporary TDs for Interrupt transfers */
-
-/*
-#define out16r(address,data) (*(unsigned short *)(address) = \
- (unsigned short)( \
- (((unsigned short)(data)&0xff)<<8) | \
- (((unsigned short)(data)&0xff00)>>8) \
- ))
- */
-#define out16r(address,data) _out16r((unsigned int)(address), (unsigned short)(data))
-void _out16r(unsigned int address, unsigned short data)
-{
-	unsigned short val = (unsigned short)((((unsigned short)(data) & 0xff)
-					       << 8) | (((unsigned short)(data)
-							 & 0xff00) >> 8));
-#ifdef UHCI_DEBUG_REGS
-	printf("out16r(0x%lx,0x%04x = 0x%04x)\n", address, val, data);
-#endif
-	*(unsigned short *)(address) = val;
-}
-
-#define out32r(address,data) _out32r((unsigned int)(address), (unsigned int)(data))
-void _out32r(unsigned int address, unsigned int data)
-{
-	unsigned int val = (unsigned int)((((unsigned int)(data) & 0x000000ff)
-					   << 24) | (((unsigned int)(data) &
-						      0x0000ff00) << 8) |
-					  (((unsigned int)(data) & 0x00ff0000)
-					   >> 8) | (((unsigned int)(data) &
-						     0xff000000) >> 24));
-#ifdef UHCI_DEBUG_REGS
-	printf("out32r(0x%lx,0x%lx = 0x%lx)\n", address, val, data);
-#endif
-	*(unsigned int *)address = val;
-}
-
-#define in16r(address) _in16r((unsigned int)(address))
-unsigned short _in16r(unsigned int address)
-{
-	unsigned short val = sparc_load_reg_cachemiss_word(address);
-	val = ((val << 8) & 0xff00) | ((val >> 8) & 0xff);
-#ifdef UHCI_DEBUG_REGS
-	printf("in16r(0x%lx): 0x%04x\n", address, val);
-#endif
-	return val;
-}
-
-#define in32r(address) _in32r((unsigned int)(address))
-unsigned int _in32r(unsigned int address)
-{
-	unsigned int val = sparc_load_reg_cachemiss(address);
-	val =
-	    ((val << 24) & 0xff000000) | ((val << 8) & 0xff0000) | ((val >> 8) &
-								    0xff00) |
-	    ((val >> 24) & 0xff);
-#ifdef UHCI_DEBUG_REGS
-	printf("in32r(0x%lx): 0x%08x\n", address, val);
-#endif
-	return val;
-}
-
-#define READ32(address) sparc_load_reg_cachemiss((unsigned int)(address))
-
-/*#define USB_UHCI_DEBUG*/
-#undef USB_UHCI_DEBUG
-
-void usb_show_td(int max);
-#ifdef	USB_UHCI_DEBUG
-void grusb_show_regs(void);
-#define	USB_UHCI_PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define USB_UHCI_PRINTF(fmt,args...)
-#endif
-
-static int grusb_irq = -1;	/* irq vector, if -1 uhci is stopped / reseted */
-unsigned int usb_base_addr;	/* base address */
-
-static uhci_td_t td_int[8] __attribute__ ((aligned(16)));	/* Interrupt Transfer descriptors */
-static uhci_qh_t qh_cntrl __attribute__ ((aligned(16)));	/* control Queue Head */
-static uhci_qh_t qh_bulk __attribute__ ((aligned(16)));	/*  bulk Queue Head */
-static uhci_qh_t qh_end __attribute__ ((aligned(16)));	/* end Queue Head */
-static uhci_td_t td_last __attribute__ ((aligned(16)));	/* last TD (linked with end chain) */
-
-/* temporary tds */
-static uhci_td_t tmp_td[USB_MAX_TEMP_TD] __attribute__ ((aligned(16)));	/* temporary bulk/control td's  */
-static uhci_td_t tmp_int_td[USB_MAX_TEMP_INT_TD] __attribute__ ((aligned(16)));	/* temporary interrupt td's  */
-
-static unsigned long framelist[1024] __attribute__ ((aligned(0x1000)));	/* frame list */
-
-static struct virt_root_hub rh;	/* struct for root hub */
-
-/**********************************************************************
- * some forward decleration
- */
-int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
-		       void *buffer, int transfer_len,
-		       struct devrequest *setup);
-
-/* fill a td with the approproiate data. Link, status, info and buffer
- * are used by the USB controller itselfes, dev is used to identify the
- * "connected" device
- */
-void usb_fill_td(uhci_td_t * td, unsigned long link, unsigned long status,
-		 unsigned long info, unsigned long buffer, unsigned long dev)
-{
-	td->link = swap_32(link);
-	td->status = swap_32(status);
-	if ((info & UHCI_PID) == 0)
-		info |= USB_PID_OUT;
-	td->info = swap_32(info);
-	td->buffer = swap_32(buffer);
-	td->dev_ptr = dev;
-}
-
-/* fill a qh with the approproiate data. Head and element are used by the USB controller
- * itselfes. As soon as a valid dev_ptr is filled, a td chain is connected to the qh.
- * Please note, that after completion of the td chain, the entry element is removed /
- * marked invalid by the USB controller.
- */
-void usb_fill_qh(uhci_qh_t * qh, unsigned long head, unsigned long element)
-{
-	qh->head = swap_32(head);
-	qh->element = swap_32(element);
-	qh->dev_ptr = 0L;
-}
-
-/* get the status of a td->status
- */
-unsigned long usb_uhci_td_stat(unsigned long status)
-{
-	unsigned long result = 0;
-	result |= (status & TD_CTRL_NAK) ? USB_ST_NAK_REC : 0;
-	result |= (status & TD_CTRL_STALLED) ? USB_ST_STALLED : 0;
-	result |= (status & TD_CTRL_DBUFERR) ? USB_ST_BUF_ERR : 0;
-	result |= (status & TD_CTRL_BABBLE) ? USB_ST_BABBLE_DET : 0;
-	result |= (status & TD_CTRL_CRCTIMEO) ? USB_ST_CRC_ERR : 0;
-	result |= (status & TD_CTRL_BITSTUFF) ? USB_ST_BIT_ERR : 0;
-	result |= (status & TD_CTRL_ACTIVE) ? USB_ST_NOT_PROC : 0;
-	return result;
-}
-
-/* get the status and the transferred len of a td chain.
- * called from the completion handler
- */
-int usb_get_td_status(uhci_td_t * td, struct usb_device *dev)
-{
-	unsigned long temp, info;
-	unsigned long stat;
-	uhci_td_t *mytd = td;
-
-	if (dev->devnum == rh.devnum)
-		return 0;
-	dev->act_len = 0;
-	stat = 0;
-	do {
-		temp = swap_32((unsigned long)READ32(&mytd->status));
-		stat = usb_uhci_td_stat(temp);
-		info = swap_32((unsigned long)READ32(&mytd->info));
-		if (((info & 0xff) != USB_PID_SETUP) && (((info >> 21) & 0x7ff) != 0x7ff) && (temp & 0x7FF) != 0x7ff) {	/* if not setup and not null data pack */
-			dev->act_len += (temp & 0x7FF) + 1;	/* the transferred len is act_len + 1 */
-		}
-		if (stat) {	/* status no ok */
-			dev->status = stat;
-			return -1;
-		}
-		temp = swap_32((unsigned long)READ32(&mytd->link));
-		mytd = (uhci_td_t *) (temp & 0xfffffff0);
-	} while ((temp & 0x1) == 0);	/* process all TDs */
-	dev->status = stat;
-	return 0;		/* Ok */
-}
-
-/*-------------------------------------------------------------------
- *                         LOW LEVEL STUFF
- *          assembles QHs und TDs for control, bulk and iso
- *-------------------------------------------------------------------*/
-int dummy(void)
-{
-	USB_UHCI_PRINTF("DUMMY\n");
-	return 0;
-}
-
-/* Submits a control message. That is a Setup, Data and Status transfer.
- * Routine does not wait for completion.
- */
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		       int transfer_len, struct devrequest *setup)
-{
-	unsigned long destination, status;
-	int maxsze = usb_maxpacket(dev, pipe);
-	unsigned long dataptr;
-	int len;
-	int pktsze;
-	int i = 0;
-
-	if (!maxsze) {
-		USB_UHCI_PRINTF
-		    ("uhci_submit_control_urb: pipesize for pipe %lx is zero\n",
-		     pipe);
-		return -1;
-	}
-	if (((pipe >> 8) & 0x7f) == rh.devnum) {
-		/* this is the root hub -> redirect it */
-		return uhci_submit_rh_msg(dev, pipe, buffer, transfer_len,
-					  setup);
-	}
-	USB_UHCI_PRINTF("uhci_submit_control start len %x, maxsize %x\n",
-			transfer_len, maxsze);
-	/* The "pipe" thing contains the destination in bits 8--18 */
-	destination = (pipe & PIPE_DEVEP_MASK) | USB_PID_SETUP;	/* Setup stage */
-	/* 3 errors */
-	status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
-	/* (urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD); */
-	/*  Build the TD for the control request, try forever, 8 bytes of data */
-	usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, destination | (7 << 21),
-		    (unsigned long)setup, (unsigned long)dev);
-#ifdef DEBUG_EXTRA
-	{
-		char *sp = (char *)setup;
-		printf("SETUP to pipe %lx: %x %x %x %x %x %x %x %x\n", pipe,
-		       sp[0], sp[1], sp[2], sp[3], sp[4], sp[5], sp[6], sp[7]);
-	}
-#endif
-	dataptr = (unsigned long)buffer;
-	len = transfer_len;
-
-	/* If direction is "send", change the frame from SETUP (0x2D)
-	   to OUT (0xE1). Else change it from SETUP to IN (0x69). */
-	destination =
-	    (pipe & PIPE_DEVEP_MASK) | ((pipe & USB_DIR_IN) ==
-					0 ? USB_PID_OUT : USB_PID_IN);
-	while (len > 0) {
-		/* data stage */
-		pktsze = len;
-		i++;
-		if (pktsze > maxsze)
-			pktsze = maxsze;
-		destination ^= 1 << TD_TOKEN_TOGGLE;	/* toggle DATA0/1 */
-		usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, destination | ((pktsze - 1) << 21), dataptr, (unsigned long)dev);	/* Status, pktsze bytes of data */
-		tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]);
-
-		dataptr += pktsze;
-		len -= pktsze;
-	}
-
-	/*  Build the final TD for control status */
-	/* It's only IN if the pipe is out AND we aren't expecting data */
-
-	destination &= ~UHCI_PID;
-	if (((pipe & USB_DIR_IN) == 0) || (transfer_len == 0))
-		destination |= USB_PID_IN;
-	else
-		destination |= USB_PID_OUT;
-	destination |= 1 << TD_TOKEN_TOGGLE;	/* End in Data1 */
-	i++;
-	status &= ~TD_CTRL_SPD;
-	/* no limit on errors on final packet , 0 bytes of data */
-	usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status | TD_CTRL_IOC,
-		    destination | (UHCI_NULL_DATA_SIZE << 21), 0,
-		    (unsigned long)dev);
-	tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]);	/* queue status td */
-	/* usb_show_td(i+1); */
-	USB_UHCI_PRINTF("uhci_submit_control end (%d tmp_tds used)\n", i);
-	/* first mark the control QH element terminated */
-	qh_cntrl.element = 0xffffffffL;
-	/* set qh active */
-	qh_cntrl.dev_ptr = (unsigned long)dev;
-	/* fill in tmp_td_chain */
-	dummy();
-	qh_cntrl.element = swap_32((unsigned long)&tmp_td[0]);
-	return 0;
-}
-
-/*-------------------------------------------------------------------
- * Prepare TDs for bulk transfers.
- */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		    int transfer_len)
-{
-	unsigned long destination, status, info;
-	unsigned long dataptr;
-	int maxsze = usb_maxpacket(dev, pipe);
-	int len;
-	int i = 0;
-
-	if (transfer_len < 0) {
-		printf("Negative transfer length in submit_bulk\n");
-		return -1;
-	}
-	if (!maxsze)
-		return -1;
-	/* The "pipe" thing contains the destination in bits 8--18. */
-	destination = (pipe & PIPE_DEVEP_MASK) | usb_packetid(pipe);
-	/* 3 errors */
-	status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | (3 << 27);
-	/*      ((urb->transfer_flags & USB_DISABLE_SPD) ? 0 : TD_CTRL_SPD) | (3 << 27); */
-	/* Build the TDs for the bulk request */
-	len = transfer_len;
-	dataptr = (unsigned long)buffer;
-	do {
-		int pktsze = len;
-		if (pktsze > maxsze)
-			pktsze = maxsze;
-		/* pktsze bytes of data  */
-		info =
-		    destination | (((pktsze - 1) & UHCI_NULL_DATA_SIZE) << 21) |
-		    (usb_gettoggle
-		     (dev, usb_pipeendpoint(pipe),
-		      usb_pipeout(pipe)) << TD_TOKEN_TOGGLE);
-
-		if ((len - pktsze) == 0)
-			status |= TD_CTRL_IOC;	/* last one generates INT */
-
-		usb_fill_td(&tmp_td[i], UHCI_PTR_TERM, status, info, dataptr, (unsigned long)dev);	/* Status, pktsze bytes of data */
-		if (i > 0)
-			tmp_td[i - 1].link = swap_32((unsigned long)&tmp_td[i]);
-		i++;
-		dataptr += pktsze;
-		len -= pktsze;
-		usb_dotoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
-	} while (len > 0);
-	/* first mark the bulk QH element terminated */
-	qh_bulk.element = 0xffffffffL;
-	/* set qh active */
-	qh_bulk.dev_ptr = (unsigned long)dev;
-	/* fill in tmp_td_chain */
-	qh_bulk.element = swap_32((unsigned long)&tmp_td[0]);
-	return 0;
-}
-
-/* search a free interrupt td
- */
-uhci_td_t *uhci_alloc_int_td(void)
-{
-	int i;
-	for (i = 0; i < USB_MAX_TEMP_INT_TD; i++) {
-		if (tmp_int_td[i].dev_ptr == 0)	/* no device assigned -> free TD */
-			return &tmp_int_td[i];
-	}
-	return NULL;
-}
-
-/*-------------------------------------------------------------------
- * submits USB interrupt (ie. polling ;-)
- */
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		   int transfer_len, int interval)
-{
-	int nint, n;
-	unsigned long status, destination;
-	unsigned long info, tmp;
-	uhci_td_t *mytd;
-	if (interval < 0 || interval >= 256)
-		return -1;
-
-	if (interval == 0)
-		nint = 0;
-	else {
-		for (nint = 0, n = 1; nint <= 8; nint++, n += n) {	/* round interval down to 2^n */
-			if (interval < n) {
-				interval = n / 2;
-				break;
-			}
-		}
-		nint--;
-	}
-
-	USB_UHCI_PRINTF("Rounded interval to %i, chain  %i\n", interval, nint);
-	mytd = uhci_alloc_int_td();
-	if (mytd == NULL) {
-		printf("No free INT TDs found\n");
-		return -1;
-	}
-	status = (pipe & TD_CTRL_LS) | TD_CTRL_ACTIVE | TD_CTRL_IOC | (3 << 27);
-/*		(urb->transfer_flags & USB_DISABLE_SPD ? 0 : TD_CTRL_SPD) | (3 << 27);
-*/
-
-	destination =
-	    (pipe & PIPE_DEVEP_MASK) | usb_packetid(pipe) |
-	    (((transfer_len - 1) & 0x7ff) << 21);
-
-	info =
-	    destination |
-	    (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)) <<
-	     TD_TOKEN_TOGGLE);
-	tmp = swap_32(td_int[nint].link);
-	usb_fill_td(mytd, tmp, status, info, (unsigned long)buffer,
-		    (unsigned long)dev);
-	/* Link it */
-	tmp = swap_32((unsigned long)mytd);
-	td_int[nint].link = tmp;
-
-	usb_dotoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
-
-	return 0;
-}
-
-/**********************************************************************
- * Low Level functions
- */
-
-void reset_hc(void)
-{
-
-	/* Global reset for 100ms */
-	out16r(usb_base_addr + USBPORTSC1, 0x0204);
-	out16r(usb_base_addr + USBPORTSC2, 0x0204);
-	out16r(usb_base_addr + USBCMD, USBCMD_GRESET | USBCMD_RS);
-	/* Turn off all interrupts */
-	out16r(usb_base_addr + USBINTR, 0);
-	mdelay(50);
-	out16r(usb_base_addr + USBCMD, 0);
-	mdelay(10);
-}
-
-void start_hc(void)
-{
-	int timeout = 1000;
-
-	while (in16r(usb_base_addr + USBCMD) & USBCMD_HCRESET) {
-		if (!--timeout) {
-			printf("USBCMD_HCRESET timed out!\n");
-			break;
-		}
-	}
-	/* Turn on all interrupts */
-	out16r(usb_base_addr + USBINTR,
-	       USBINTR_TIMEOUT | USBINTR_RESUME | USBINTR_IOC | USBINTR_SP);
-	/* Start at frame 0 */
-	out16r(usb_base_addr + USBFRNUM, 0);
-	/* set Framebuffer base address */
-	out32r(usb_base_addr + USBFLBASEADD, (unsigned long)&framelist);
-	/* Run and mark it configured with a 64-byte max packet */
-	out16r(usb_base_addr + USBCMD, USBCMD_RS | USBCMD_CF | USBCMD_MAXP);
-}
-
-/* Initialize the skeleton
- */
-void usb_init_skel(void)
-{
-	unsigned long temp;
-	int n;
-
-	for (n = 0; n < USB_MAX_TEMP_INT_TD; n++)
-		tmp_int_td[n].dev_ptr = 0L;	/* no devices connected */
-	/* last td */
-	usb_fill_td(&td_last, UHCI_PTR_TERM, TD_CTRL_IOC, USB_PID_OUT, 0, 0L);
-	/* usb_fill_td(&td_last,UHCI_PTR_TERM,0,0,0); */
-	/* End Queue Header */
-	usb_fill_qh(&qh_end, UHCI_PTR_TERM, (unsigned long)&td_last);
-	/* Bulk Queue Header */
-	temp = (unsigned long)&qh_end;
-	usb_fill_qh(&qh_bulk, temp | UHCI_PTR_QH, UHCI_PTR_TERM);
-	/* Control Queue Header */
-	temp = (unsigned long)&qh_bulk;
-	usb_fill_qh(&qh_cntrl, temp | UHCI_PTR_QH, UHCI_PTR_TERM);
-	/* 1ms Interrupt td */
-	temp = (unsigned long)&qh_cntrl;
-	usb_fill_td(&td_int[0], temp | UHCI_PTR_QH, 0, USB_PID_OUT, 0, 0L);
-	temp = (unsigned long)&td_int[0];
-	for (n = 1; n < 8; n++)
-		usb_fill_td(&td_int[n], temp, 0, USB_PID_OUT, 0, 0L);
-	for (n = 0; n < 1024; n++) {
-		/* link all framelist pointers to one of the interrupts */
-		int m, o;
-		if ((n & 127) == 127)
-			framelist[n] = swap_32((unsigned long)&td_int[0]);
-		else
-			for (o = 1, m = 2; m <= 128; o++, m += m)
-				if ((n & (m - 1)) == ((m - 1) / 2))
-					framelist[n] =
-					    swap_32((unsigned long)&td_int[o]);
-
-	}
-}
-
-/* check the common skeleton for completed transfers, and update the status
- * of the "connected" device. Called from the IRQ routine.
- */
-void usb_check_skel(void)
-{
-	struct usb_device *dev;
-	/* start with the control qh */
-	if (qh_cntrl.dev_ptr != 0) {	/* it's a device assigned check if this caused IRQ */
-		dev = (struct usb_device *)qh_cntrl.dev_ptr;
-		/* Flush cache now that hardware updated DATA and TDs/QHs */
-		if (!gd->arch.snooping_avail)
-			sparc_dcache_flush_all();
-		usb_get_td_status(&tmp_td[0], dev);	/* update status */
-		if (!(dev->status & USB_ST_NOT_PROC)) {	/* is not active anymore, disconnect devices */
-			qh_cntrl.dev_ptr = 0;
-		}
-	}
-	/* now process the bulk */
-	if (qh_bulk.dev_ptr != 0) {	/* it's a device assigned check if this caused IRQ */
-		dev = (struct usb_device *)qh_bulk.dev_ptr;
-		/* Flush cache now that hardware updated DATA and TDs/QHs */
-		if (!gd->arch.snooping_avail)
-			sparc_dcache_flush_all();
-		usb_get_td_status(&tmp_td[0], dev);	/* update status */
-		if (!(dev->status & USB_ST_NOT_PROC)) {	/* is not active anymore, disconnect devices */
-			qh_bulk.dev_ptr = 0;
-		}
-	}
-}
-
-/* check the interrupt chain, ubdate the status of the appropriate device,
- * call the appropriate irqhandler and reactivate the TD if the irqhandler
- * returns with 1
- */
-void usb_check_int_chain(void)
-{
-	int i, res;
-	unsigned long link, status;
-	struct usb_device *dev;
-	uhci_td_t *td, *prevtd;
-
-	for (i = 0; i < 8; i++) {
-		prevtd = &td_int[i];	/* the first previous td is the skeleton td */
-		link = swap_32(READ32(&td_int[i].link)) & 0xfffffff0;	/* next in chain */
-		td = (uhci_td_t *) link;	/* assign it */
-		/* all interrupt TDs are finally linked to the td_int[0].
-		 * so we process all until we find the td_int[0].
-		 * if int0 chain points to a QH, we're also done
-		 */
-		while (((i > 0) && (link != (unsigned long)&td_int[0])) ||
-		       ((i == 0)
-			&& !(swap_32(READ32(&td->link)) & UHCI_PTR_QH))) {
-			/* check if a device is assigned with this td */
-			status = swap_32(READ32(&td->status));
-			if ((td->dev_ptr != 0L) && !(status & TD_CTRL_ACTIVE)) {
-				/* td is not active and a device is assigned -> call irqhandler */
-				dev = (struct usb_device *)td->dev_ptr;
-				dev->irq_act_len = ((status & 0x7FF) == 0x7FF) ? 0 : (status & 0x7FF) + 1;	/* transferred length */
-				dev->irq_status = usb_uhci_td_stat(status);	/* get status */
-				res = dev->irq_handle(dev);	/* call irqhandler */
-				if (res == 1) {
-					/* reactivate */
-					status |= TD_CTRL_ACTIVE;
-					td->status = swap_32(status);
-					prevtd = td;	/* previous td = this td */
-				} else {
-					prevtd->link = READ32(&td->link);	/* link previous td directly to the nex td -> unlinked */
-					/* remove device pointer */
-					td->dev_ptr = 0L;
-				}
-			}	/* if we call the irq handler */
-			link = swap_32(READ32(&td->link)) & 0xfffffff0;	/* next in chain */
-			td = (uhci_td_t *) link;	/* assign it */
-		}		/* process all td in this int chain */
-	}			/* next interrupt chain */
-}
-
-/* usb interrupt service routine.
- */
-void handle_usb_interrupt(void)
-{
-	unsigned short status;
-	static int error = 0;
-
-	/*
-	 * Read the interrupt status, and write it back to clear the
-	 * interrupt cause
-	 */
-
-	status = in16r(usb_base_addr + USBSTS);
-
-	if (!status)		/* shared interrupt, not mine */
-		return;
-	if (status != 1) {
-		/* remove host controller halted state */
-		if ((status & (USBSTS_HCPE | USBSTS_HCH)) ==
-		    (USBSTS_HCPE | USBSTS_HCH)) {
-			/* Stop due to bug in driver, or hardware */
-			out16r(usb_base_addr + USBSTS, status);
-			out16r(usb_base_addr + USBCMD,
-			       USBCMD_HCRESET | USBCMD_GRESET);
-			printf
-			    ("GRUSB: HW detected error(s) in USB Descriptors (STS: 0x%x)\n",
-			     status);
-			usb_show_td(8);
-			return;
-		} else if ((status & 0x20)
-			   && ((in16r(usb_base_addr + USBCMD) & USBCMD_RS) ==
-			       0)) {
-			if (error < 10) {
-				out16r(usb_base_addr + USBCMD,
-				       USBCMD_RS | in16r(usb_base_addr +
-							 USBCMD));
-				error++;
-			}
-		} else
-			error = 0;
-	}
-	usb_check_int_chain();	/* call interrupt handlers for int tds */
-	usb_check_skel();	/* call completion handler for common transfer routines */
-	out16r(usb_base_addr + USBSTS, status);
-}
-
-/* init uhci
- */
-int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
-{
-	ambapp_ahbdev ahbdev;
-
-	/* Find GRUSB core using AMBA Plug&Play information */
-	if (ambapp_ahbslv_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_UHCI,
-		CONFIG_SYS_GRLIB_GRUSB_INDEX, &ahbdev) != 1) {
-		printf("USB UHCI: Failed to find GRUSB controller\n");
-		return -1;
-	}
-	usb_base_addr = ahbdev.address[0];
-	grusb_irq = ahbdev.irq;
-	/*
-	   usb_base_addr = 0xfffa0000;
-	   grusb_irq = 10;
-	 */
-#ifdef USB_UHCI_DEBUG
-	grusb_show_regs();
-#endif
-	memset(td_int, 0, sizeof(td_int));
-	memset(tmp_td, 0, sizeof(tmp_td));
-	memset(tmp_int_td, 0, sizeof(tmp_int_td));
-	memset(&qh_cntrl, 0, sizeof(qh_cntrl));
-	memset(&qh_end, 0, sizeof(qh_end));
-	memset(&td_last, 0, sizeof(td_last));
-
-	irq_free_handler(grusb_irq);
-	USB_UHCI_PRINTF("GRUSB: at 0x%lx irq %d\n", usb_base_addr, grusb_irq);
-	rh.devnum = 0;
-	usb_init_skel();
-	reset_hc();
-	start_hc();
-	irq_install_handler(grusb_irq,
-			    (interrupt_handler_t *) handle_usb_interrupt, NULL);
-	return 0;
-}
-
-/* stop uhci
- */
-int usb_lowlevel_stop(int index)
-{
-	if (grusb_irq == -1)
-		return 1;
-	irq_free_handler(grusb_irq);
-	reset_hc();
-	grusb_irq = -1;
-	return 0;
-}
-
-/*******************************************************************************************
- * Virtual Root Hub
- * Since the uhci does not have a real HUB, we simulate one ;-)
- */
-#undef	USB_RH_DEBUG
-
-#ifdef	USB_RH_DEBUG
-#define	USB_RH_PRINTF(fmt,args...)	printf (fmt ,##args)
-static void usb_display_wValue(unsigned short wValue, unsigned short wIndex);
-static void usb_display_Req(unsigned short req);
-#else
-#define USB_RH_PRINTF(fmt,args...)
-static void usb_display_wValue(unsigned short wValue, unsigned short wIndex)
-{
-}
-static void usb_display_Req(unsigned short req)
-{
-}
-#endif
-
-#define WANT_USB_ROOT_HUB_HUB_DES
-#include <usbroothubdes.h>
-#undef WANT_USB_ROOT_HUB_HUB_DES
-
-/*
- * Root Hub Control Pipe (interrupt Pipes are not supported)
- */
-
-int uhci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		       int transfer_len, struct devrequest *cmd)
-{
-	void *data = buffer;
-	int leni = transfer_len;
-	int len = 0;
-	int status = 0;
-	int stat = 0;
-	int i;
-
-	unsigned short cstatus;
-
-	unsigned short bmRType_bReq;
-	unsigned short wValue;
-	unsigned short wIndex;
-	unsigned short wLength;
-
-	if (usb_pipeint(pipe)) {
-		printf("Root-Hub submit IRQ: NOT implemented\n");
-		return 0;
-	}
-	bmRType_bReq = cmd->requesttype | cmd->request << 8;
-	wValue = swap_16(cmd->value);
-	wIndex = swap_16(cmd->index);
-	wLength = swap_16(cmd->length);
-	usb_display_Req(bmRType_bReq);
-	for (i = 0; i < 8; i++)
-		rh.c_p_r[i] = 0;
-	USB_RH_PRINTF("Root-Hub: adr: %2x cmd(%1x): %02x%02x %04x %04x %04x\n",
-		      dev->devnum, 8, cmd->requesttype, cmd->request, wValue,
-		      wIndex, wLength);
-
-	switch (bmRType_bReq) {
-		/* Request Destination:
-		   without flags: Device,
-		   RH_INTERFACE: interface,
-		   RH_ENDPOINT: endpoint,
-		   RH_CLASS means HUB here,
-		   RH_OTHER | RH_CLASS  almost ever means HUB_PORT here
-		 */
-
-	case RH_GET_STATUS:
-		*(unsigned short *)data = swap_16(1);
-		len = 2;
-		break;
-	case RH_GET_STATUS | RH_INTERFACE:
-		*(unsigned short *)data = swap_16(0);
-		len = 2;
-		break;
-	case RH_GET_STATUS | RH_ENDPOINT:
-		*(unsigned short *)data = swap_16(0);
-		len = 2;
-		break;
-	case RH_GET_STATUS | RH_CLASS:
-		*(unsigned long *)data = swap_32(0);
-		len = 4;
-		break;		/* hub power ** */
-	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-
-		status = in16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1));
-		cstatus = ((status & USBPORTSC_CSC) >> (1 - 0)) |
-		    ((status & USBPORTSC_PEC) >> (3 - 1)) |
-		    (rh.c_p_r[wIndex - 1] << (0 + 4));
-		status = (status & USBPORTSC_CCS) | ((status & USBPORTSC_PE) >> (2 - 1)) | ((status & USBPORTSC_SUSP) >> (12 - 2)) | ((status & USBPORTSC_PR) >> (9 - 4)) | (1 << 8) |	/* power on ** */
-		    ((status & USBPORTSC_LSDA) << (-8 + 9));
-
-		*(unsigned short *)data = swap_16(status);
-		*(unsigned short *)(data + 2) = swap_16(cstatus);
-		len = 4;
-		break;
-	case RH_CLEAR_FEATURE | RH_ENDPOINT:
-		switch (wValue) {
-		case (RH_ENDPOINT_STALL):
-			len = 0;
-			break;
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_CLASS:
-		switch (wValue) {
-		case (RH_C_HUB_OVER_CURRENT):
-			len = 0;	/* hub power over current ** */
-			break;
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
-		usb_display_wValue(wValue, wIndex);
-		switch (wValue) {
-		case (RH_PORT_ENABLE):
-			status =
-			    in16r(usb_base_addr + USBPORTSC1 +
-				  2 * (wIndex - 1));
-			status = (status & 0xfff5) & ~USBPORTSC_PE;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			len = 0;
-			break;
-		case (RH_PORT_SUSPEND):
-			status =
-			    in16r(usb_base_addr + USBPORTSC1 +
-				  2 * (wIndex - 1));
-			status = (status & 0xfff5) & ~USBPORTSC_SUSP;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			len = 0;
-			break;
-		case (RH_PORT_POWER):
-			len = 0;	/* port power ** */
-			break;
-		case (RH_C_PORT_CONNECTION):
-			status =
-			    in16r(usb_base_addr + USBPORTSC1 +
-				  2 * (wIndex - 1));
-			status = (status & 0xfff5) | USBPORTSC_CSC;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			len = 0;
-			break;
-		case (RH_C_PORT_ENABLE):
-			status =
-			    in16r(usb_base_addr + USBPORTSC1 +
-				  2 * (wIndex - 1));
-			status = (status & 0xfff5) | USBPORTSC_PEC;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			len = 0;
-			break;
-		case (RH_C_PORT_SUSPEND):
-/*** WR_RH_PORTSTAT(RH_PS_PSSC); */
-			len = 0;
-			break;
-		case (RH_C_PORT_OVER_CURRENT):
-			len = 0;
-			break;
-		case (RH_C_PORT_RESET):
-			rh.c_p_r[wIndex - 1] = 0;
-			len = 0;
-			break;
-		}
-		break;
-	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
-		usb_display_wValue(wValue, wIndex);
-		switch (wValue) {
-		case (RH_PORT_SUSPEND):
-			status =
-			    in16r(usb_base_addr + USBPORTSC1 +
-				  2 * (wIndex - 1));
-			status = (status & 0xfff5) | USBPORTSC_SUSP;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			len = 0;
-			break;
-		case (RH_PORT_RESET):
-			status =
-			    in16r(usb_base_addr + USBPORTSC1 +
-				  2 * (wIndex - 1));
-			status = (status & 0xfff5) | USBPORTSC_PR;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			mdelay(10);
-			status = (status & 0xfff5) & ~USBPORTSC_PR;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			udelay(10);
-			status = (status & 0xfff5) | USBPORTSC_PE;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			mdelay(10);
-			status = (status & 0xfff5) | 0xa;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			len = 0;
-			break;
-		case (RH_PORT_POWER):
-			len = 0;	/* port power ** */
-			break;
-		case (RH_PORT_ENABLE):
-			status =
-			    in16r(usb_base_addr + USBPORTSC1 +
-				  2 * (wIndex - 1));
-			status = (status & 0xfff5) | USBPORTSC_PE;
-			out16r(usb_base_addr + USBPORTSC1 + 2 * (wIndex - 1),
-			       status);
-			len = 0;
-			break;
-		}
-		break;
-
-	case RH_SET_ADDRESS:
-		rh.devnum = wValue;
-		len = 0;
-		break;
-	case RH_GET_DESCRIPTOR:
-		switch ((wValue & 0xff00) >> 8) {
-		case (0x01):	/* device descriptor */
-			i = sizeof(root_hub_config_des);
-			status = i > wLength ? wLength : i;
-			len = leni > status ? status : leni;
-			memcpy(data, root_hub_dev_des, len);
-			break;
-		case (0x02):	/* configuration descriptor */
-			i = sizeof(root_hub_config_des);
-			status = i > wLength ? wLength : i;
-			len = leni > status ? status : leni;
-			memcpy(data, root_hub_config_des, len);
-			break;
-		case (0x03):	/*string descriptors */
-			if (wValue == 0x0300) {
-				i = sizeof(root_hub_str_index0);
-				status = i > wLength ? wLength : i;
-				len = leni > status ? status : leni;
-				memcpy(data, root_hub_str_index0, len);
-				break;
-			}
-			if (wValue == 0x0301) {
-				i = sizeof(root_hub_str_index1);
-				status = i > wLength ? wLength : i;
-				len = leni > status ? status : leni;
-				memcpy(data, root_hub_str_index1, len);
-				break;
-			}
-			stat = USB_ST_STALLED;
-		}
-		break;
-
-	case RH_GET_DESCRIPTOR | RH_CLASS:
-		root_hub_hub_des[2] = 2;
-		i = sizeof(root_hub_hub_des);
-		status = i > wLength ? wLength : i;
-		len = leni > status ? status : leni;
-		memcpy(data, root_hub_hub_des, len);
-		break;
-	case RH_GET_CONFIGURATION:
-		*(unsigned char *)data = 0x01;
-		len = 1;
-		break;
-	case RH_SET_CONFIGURATION:
-		len = 0;
-		break;
-	default:
-		stat = USB_ST_STALLED;
-	}
-	USB_RH_PRINTF("Root-Hub stat %lx port1: %x port2: %x\n\n", stat,
-		      in16r(usb_base_addr + USBPORTSC1),
-		      in16r(usb_base_addr + USBPORTSC2));
-	dev->act_len = len;
-	dev->status = stat;
-	return stat;
-
-}
-
-/********************************************************************************
- * Some Debug Routines
- */
-
-#ifdef	USB_RH_DEBUG
-
-static void usb_display_Req(unsigned short req)
-{
-	USB_RH_PRINTF("- Root-Hub Request: ");
-	switch (req) {
-	case RH_GET_STATUS:
-		USB_RH_PRINTF("Get Status ");
-		break;
-	case RH_GET_STATUS | RH_INTERFACE:
-		USB_RH_PRINTF("Get Status Interface ");
-		break;
-	case RH_GET_STATUS | RH_ENDPOINT:
-		USB_RH_PRINTF("Get Status Endpoint ");
-		break;
-	case RH_GET_STATUS | RH_CLASS:
-		USB_RH_PRINTF("Get Status Class");
-		break;		/* hub power ** */
-	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-		USB_RH_PRINTF("Get Status Class Others");
-		break;
-	case RH_CLEAR_FEATURE | RH_ENDPOINT:
-		USB_RH_PRINTF("Clear Feature Endpoint ");
-		break;
-	case RH_CLEAR_FEATURE | RH_CLASS:
-		USB_RH_PRINTF("Clear Feature Class ");
-		break;
-	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
-		USB_RH_PRINTF("Clear Feature Other Class ");
-		break;
-	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
-		USB_RH_PRINTF("Set Feature Other Class ");
-		break;
-	case RH_SET_ADDRESS:
-		USB_RH_PRINTF("Set Address ");
-		break;
-	case RH_GET_DESCRIPTOR:
-		USB_RH_PRINTF("Get Descriptor ");
-		break;
-	case RH_GET_DESCRIPTOR | RH_CLASS:
-		USB_RH_PRINTF("Get Descriptor Class ");
-		break;
-	case RH_GET_CONFIGURATION:
-		USB_RH_PRINTF("Get Configuration ");
-		break;
-	case RH_SET_CONFIGURATION:
-		USB_RH_PRINTF("Get Configuration ");
-		break;
-	default:
-		USB_RH_PRINTF("****UNKNOWN**** 0x%04X ", req);
-	}
-	USB_RH_PRINTF("\n");
-
-}
-
-static void usb_display_wValue(unsigned short wValue, unsigned short wIndex)
-{
-	switch (wValue) {
-	case (RH_PORT_ENABLE):
-		USB_RH_PRINTF("Root-Hub: Enable Port %d\n", wIndex);
-		break;
-	case (RH_PORT_SUSPEND):
-		USB_RH_PRINTF("Root-Hub: Suspend Port %d\n", wIndex);
-		break;
-	case (RH_PORT_POWER):
-		USB_RH_PRINTF("Root-Hub: Port Power %d\n", wIndex);
-		break;
-	case (RH_C_PORT_CONNECTION):
-		USB_RH_PRINTF("Root-Hub: C Port Connection Port %d\n", wIndex);
-		break;
-	case (RH_C_PORT_ENABLE):
-		USB_RH_PRINTF("Root-Hub: C Port Enable Port %d\n", wIndex);
-		break;
-	case (RH_C_PORT_SUSPEND):
-		USB_RH_PRINTF("Root-Hub: C Port Suspend Port %d\n", wIndex);
-		break;
-	case (RH_C_PORT_OVER_CURRENT):
-		USB_RH_PRINTF("Root-Hub: C Port Over Current Port %d\n",
-			      wIndex);
-		break;
-	case (RH_C_PORT_RESET):
-		USB_RH_PRINTF("Root-Hub: C Port reset Port %d\n", wIndex);
-		break;
-	default:
-		USB_RH_PRINTF("Root-Hub: unknown %x %x\n", wValue, wIndex);
-		break;
-	}
-}
-
-#endif
-
-/*#ifdef	USB_UHCI_DEBUG*/
-
-static int usb_display_td(uhci_td_t * td)
-{
-	unsigned long tmp;
-	int valid;
-
-	printf("TD at %p:\n", td);
-
-	tmp = swap_32(READ32(&td->link));
-	printf("Link points to 0x%08lX, %s first, %s, %s\n", tmp & 0xfffffff0,
-	       ((tmp & 0x4) == 0x4) ? "Depth" : "Breath",
-	       ((tmp & 0x2) == 0x2) ? "QH" : "TD",
-	       ((tmp & 0x1) == 0x1) ? "invalid" : "valid");
-	valid = ((tmp & 0x1) == 0x0);
-	tmp = swap_32(READ32(&td->status));
-	printf
-	    ("     %s %ld Errors %s %s %s \n     %s %s %s %s %s %s\n     Len 0x%lX\n",
-	     (((tmp >> 29) & 0x1) == 0x1) ? "SPD Enable" : "SPD Disable",
-	     ((tmp >> 28) & 0x3),
-	     (((tmp >> 26) & 0x1) == 0x1) ? "Low Speed" : "Full Speed",
-	     (((tmp >> 25) & 0x1) == 0x1) ? "ISO " : "",
-	     (((tmp >> 24) & 0x1) == 0x1) ? "IOC " : "",
-	     (((tmp >> 23) & 0x1) == 0x1) ? "Active " : "Inactive ",
-	     (((tmp >> 22) & 0x1) == 0x1) ? "Stalled" : "",
-	     (((tmp >> 21) & 0x1) == 0x1) ? "Data Buffer Error" : "",
-	     (((tmp >> 20) & 0x1) == 0x1) ? "Babble" : "",
-	     (((tmp >> 19) & 0x1) == 0x1) ? "NAK" : "",
-	     (((tmp >> 18) & 0x1) == 0x1) ? "Bitstuff Error" : "",
-	     (tmp & 0x7ff));
-	tmp = swap_32(READ32(&td->info));
-	printf("     MaxLen 0x%lX\n", ((tmp >> 21) & 0x7FF));
-	printf("     %sEndpoint 0x%lX Dev Addr 0x%lX PID 0x%lX\n",
-	       ((tmp >> 19) & 0x1) == 0x1 ? "TOGGLE " : "", ((tmp >> 15) & 0xF),
-	       ((tmp >> 8) & 0x7F), tmp & 0xFF);
-	tmp = swap_32(READ32(&td->buffer));
-	printf("     Buffer 0x%08lX\n", tmp);
-	printf("     DEV %08lX\n", td->dev_ptr);
-	return valid;
-}
-
-void usb_show_td(int max)
-{
-	int i;
-	if (max > 0) {
-		for (i = 0; i < max; i++) {
-			usb_display_td(&tmp_td[i]);
-		}
-	} else {
-		i = 0;
-		do {
-			printf("tmp_td[%d]\n", i);
-		} while (usb_display_td(&tmp_td[i++]));
-	}
-}
-
-void grusb_show_regs(void)
-{
-	unsigned int tmp;
-
-	tmp = in16r(usb_base_addr + USBCMD);
-	printf(" USBCMD:   0x%04x\n", tmp);
-	tmp = in16r(usb_base_addr + USBSTS);
-	printf(" USBSTS:   0x%04x\n", tmp);
-	tmp = in16r(usb_base_addr + USBINTR);
-	printf(" USBINTR:   0x%04x\n", tmp);
-	tmp = in16r(usb_base_addr + USBFRNUM);
-	printf(" FRNUM:   0x%04x\n", tmp);
-	tmp = in32r(usb_base_addr + USBFLBASEADD);
-	printf(" FLBASEADD:   0x%08x\n", tmp);
-	tmp = in16r(usb_base_addr + USBSOF);
-	printf(" SOFMOD:   0x%04x\n", tmp);
-	tmp = in16r(usb_base_addr + USBPORTSC1);
-	printf(" PORTSC1:   0x%04x\n", tmp);
-}
-
-/*#endif*/
-#endif				/* CONFIG_USB_UHCI */
-
-/* EOF */
diff --git a/arch/sparc/cpu/leon3/usb_uhci.h b/arch/sparc/cpu/leon3/usb_uhci.h
deleted file mode 100644
index 034814a48287..000000000000
--- a/arch/sparc/cpu/leon3/usb_uhci.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2001
- * Denis Peter, MPL AG Switzerland
- *
- * SPDX-License-Identifier:	GPL-2.0+
- *
- * Note: Part of this code has been derived from linux
- */
-#ifndef _USB_UHCI_H_
-#define _USB_UHCI_H_
-
-/* Command register */
-#define USBCMD		0
-#define   USBCMD_RS       0x0001	/* Run/Stop */
-#define   USBCMD_HCRESET  0x0002	/* Host reset */
-#define   USBCMD_GRESET   0x0004	/* Global reset */
-#define   USBCMD_EGSM     0x0008	/* Global Suspend Mode */
-#define   USBCMD_FGR      0x0010	/* Force Global Resume */
-#define   USBCMD_SWDBG    0x0020	/* SW Debug mode */
-#define   USBCMD_CF       0x0040	/* Config Flag (sw only) */
-#define   USBCMD_MAXP     0x0080	/* Max Packet (0 = 32, 1 = 64) */
-
-/* Status register */
-#define USBSTS		2
-#define   USBSTS_USBINT   0x0001	/* Interrupt due to IOC */
-#define   USBSTS_ERROR    0x0002	/* Interrupt due to error */
-#define   USBSTS_RD       0x0004	/* Resume Detect */
-#define   USBSTS_HSE      0x0008	/* Host System Error - basically PCI problems */
-#define   USBSTS_HCPE     0x0010	/* Host Controller Process Error - the scripts were buggy */
-#define   USBSTS_HCH      0x0020	/* HC Halted */
-
-/* Interrupt enable register */
-#define USBINTR		4
-#define   USBINTR_TIMEOUT 0x0001	/* Timeout/CRC error enable */
-#define   USBINTR_RESUME  0x0002	/* Resume interrupt enable */
-#define   USBINTR_IOC     0x0004	/* Interrupt On Complete enable */
-#define   USBINTR_SP      0x0008	/* Short packet interrupt enable */
-
-#define USBFRNUM      6
-#define USBFLBASEADD  8
-#define USBSOF        12
-
-/* USB port status and control registers */
-#define USBPORTSC1	16
-#define USBPORTSC2	18
-#define   USBPORTSC_CCS   0x0001	/* Current Connect Status ("device present") */
-#define   USBPORTSC_CSC   0x0002	/* Connect Status Change */
-#define   USBPORTSC_PE    0x0004	/* Port Enable */
-#define   USBPORTSC_PEC   0x0008	/* Port Enable Change */
-#define   USBPORTSC_LS    0x0030	/* Line Status */
-#define   USBPORTSC_RD    0x0040	/* Resume Detect */
-#define   USBPORTSC_LSDA  0x0100	/* Low Speed Device Attached */
-#define   USBPORTSC_PR    0x0200	/* Port Reset */
-#define   USBPORTSC_SUSP  0x1000	/* Suspend */
-
-/* Legacy support register */
-#define USBLEGSUP 0xc0
-#define USBLEGSUP_DEFAULT 0x2000	/* only PIRQ enable set */
-
-#define UHCI_NULL_DATA_SIZE 0x7ff	/* for UHCI controller TD */
-#define UHCI_PID            0xff	/* PID MASK */
-
-#define UHCI_PTR_BITS       0x000F
-#define UHCI_PTR_TERM       0x0001
-#define UHCI_PTR_QH         0x0002
-#define UHCI_PTR_DEPTH      0x0004
-
-/* for TD <status>: */
-#define TD_CTRL_SPD         (1 << 29)	/* Short Packet Detect */
-#define TD_CTRL_C_ERR_MASK  (3 << 27)	/* Error Counter bits */
-#define TD_CTRL_LS          (1 << 26)	/* Low Speed Device */
-#define TD_CTRL_IOS         (1 << 25)	/* Isochronous Select */
-#define TD_CTRL_IOC         (1 << 24)	/* Interrupt on Complete */
-#define TD_CTRL_ACTIVE      (1 << 23)	/* TD Active */
-#define TD_CTRL_STALLED     (1 << 22)	/* TD Stalled */
-#define TD_CTRL_DBUFERR     (1 << 21)	/* Data Buffer Error */
-#define TD_CTRL_BABBLE      (1 << 20)	/* Babble Detected */
-#define TD_CTRL_NAK         (1 << 19)	/* NAK Received */
-#define TD_CTRL_CRCTIMEO    (1 << 18)	/* CRC/Time Out Error */
-#define TD_CTRL_BITSTUFF    (1 << 17)	/* Bit Stuff Error */
-#define TD_CTRL_ACTLEN_MASK 0x7ff	/* actual length, encoded as n - 1 */
-
-#define TD_CTRL_ANY_ERROR	(TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
-				 TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
-
-#define TD_TOKEN_TOGGLE		19
-
-/* ------------------------------------------------------------------------------------
-   Virtual Root HUB
-   ------------------------------------------------------------------------------------ */
-/* destination of request */
-#define RH_INTERFACE               0x01
-#define RH_ENDPOINT                0x02
-#define RH_OTHER                   0x03
-
-#define RH_CLASS                   0x20
-#define RH_VENDOR                  0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS           0x0080
-#define RH_CLEAR_FEATURE        0x0100
-#define RH_SET_FEATURE          0x0300
-#define RH_SET_ADDRESS          0x0500
-#define RH_GET_DESCRIPTOR       0x0680
-#define RH_SET_DESCRIPTOR       0x0700
-#define RH_GET_CONFIGURATION    0x0880
-#define RH_SET_CONFIGURATION    0x0900
-#define RH_GET_STATE            0x0280
-#define RH_GET_INTERFACE        0x0A80
-#define RH_SET_INTERFACE        0x0B00
-#define RH_SYNC_FRAME           0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP               0x2000
-
-/* Hub port features */
-#define RH_PORT_CONNECTION         0x00
-#define RH_PORT_ENABLE             0x01
-#define RH_PORT_SUSPEND            0x02
-#define RH_PORT_OVER_CURRENT       0x03
-#define RH_PORT_RESET              0x04
-#define RH_PORT_POWER              0x08
-#define RH_PORT_LOW_SPEED          0x09
-#define RH_C_PORT_CONNECTION       0x10
-#define RH_C_PORT_ENABLE           0x11
-#define RH_C_PORT_SUSPEND          0x12
-#define RH_C_PORT_OVER_CURRENT     0x13
-#define RH_C_PORT_RESET            0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER       0x00
-#define RH_C_HUB_OVER_CURRENT      0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP    0x00
-#define RH_ENDPOINT_STALL          0x01
-
-/* Our Vendor Specific feature */
-#define RH_REMOVE_EP               0x00
-
-#define RH_ACK                     0x01
-#define RH_REQ_ERR                 -1
-#define RH_NACK                    0x00
-
-/* Transfer descriptor structure */
-typedef struct {
-	unsigned long link;	/* next td/qh (LE) */
-	unsigned long status;	/* status of the td */
-	unsigned long info;	/* Max Lenght / Endpoint / device address and PID */
-	unsigned long buffer;	/* pointer to data buffer (LE) */
-	unsigned long dev_ptr;	/* pointer to the assigned device (BE) */
-	unsigned long res[3];	/* reserved (TDs must be 8Byte aligned) */
-} uhci_td_t, *puhci_td_t;
-
-/* Queue Header structure */
-typedef struct {
-	unsigned long head;	/* Next QH (LE) */
-	unsigned long element;	/* Queue element pointer (LE) */
-	unsigned long res[5];	/* reserved */
-	unsigned long dev_ptr;	/* if 0 no tds have been assigned to this qh */
-} uhci_qh_t, *puhci_qh_t;
-
-struct virt_root_hub {
-	int devnum;		/* Address of Root Hub endpoint */
-	int numports;		/* number of ports */
-	int c_p_r[8];		/* C_PORT_RESET */
-};
-
-#endif				/* _USB_UHCI_H_ */
diff --git a/arch/sparc/cpu/u-boot.lds b/arch/sparc/cpu/u-boot.lds
deleted file mode 100644
index 1ade3b344b67..000000000000
--- a/arch/sparc/cpu/u-boot.lds
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-OUTPUT_FORMAT("elf32-sparc", "elf32-sparc", "elf32-sparc")
-OUTPUT_ARCH(sparc)
-ENTRY(_start)
-SECTIONS
-{
-
-/* Read-only sections, merged into text segment: */
-	. = + SIZEOF_HEADERS;
-	.interp : { *(.interp) }
-	.hash          : { *(.hash) }
-	.dynsym        : { *(.dynsym) }
-	.dynstr        : { *(.dynstr) }
-	.rel.text      : { *(.rel.text) }
-	.rela.text     : { *(.rela.text) }
-	.rel.data      : { *(.rel.data) }
-	.rela.data     : { *(.rela.data) }
-	.rel.rodata    : { *(.rel.rodata) }
-	.rela.rodata   : { *(.rela.rodata) }
-	.rel.got       : { *(.rel.got) }
-	.rela.got      : { *(.rela.got) }
-	.rel.ctors     : { *(.rel.ctors) }
-	.rela.ctors    : { *(.rela.ctors) }
-	.rel.dtors     : { *(.rel.dtors) }
-	.rela.dtors    : { *(.rela.dtors) }
-	.rel.bss       : { *(.rel.bss) }
-	.rela.bss      : { *(.rela.bss) }
-	.rel.plt       : { *(.rel.plt) }
-	.rela.plt      : { *(.rela.plt) }
-	.init          : { *(.init) }
-	.plt : { *(.plt) }
-
-	.text : {
-		_load_addr = .;
-		_text = .;
-
-		*(.start)
-		*/start.o (.text)
-/* 8k is the same as the PROM offset from end of main memory, (CONFIG_SYS_PROM_SIZE) */
-		. = ALIGN(8192);
-/* PROM CODE, Will be relocated to the end of memory,
- * no global data accesses please.
- */
-		__prom_start = .;
-		*(.prom.pgt)
-		*(.prom.data)
-		*(.prom.text)
-		. = ALIGN(16);
-		__prom_end = .;
-		*(.text)
-		*(.fixup)
-		*(.gnu.warning)
-/*		*(.got1)*/
-		. = ALIGN(16);
-		*(.eh_frame)
-		*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-	}
-	. = ALIGN(4);
-	_etext = .;
-
-	/* CMD Table */
-
-
-	. = ALIGN(4);
-	.u_boot_list : {
-		KEEP(*(SORT(.u_boot_list*)));
-	}
-
-	.data	:
-	{
-		*(.data)
-		*(.data1)
-		*(.data.rel)
-		*(.data.rel.*)
-		*(.sdata)
-		*(.sdata2)
-		*(.dynamic)
-		CONSTRUCTORS
-	}
-	_edata	=	.;
-	PROVIDE (edata = .);
-
-	. = ALIGN(4);
-	__got_start = .;
-	.got : {
-		*(.got)
-/*		*(.data.rel)
-		*(.data.rel.local)*/
-		. = ALIGN(16);
-	}
-	__got_end = .;
-
-/*	.data.rel : { } */
-
-
-	. = ALIGN(4096);
-	__init_begin = .;
-	.text.init : { *(.text.init) }
-	.data.init : { *(.data.init) }
-	. = ALIGN(4096);
-	__init_end = .;
-
-	__bss_start = .;
-	.bss	:
-	{
-	 *(.sbss) *(.scommon)
-	 *(.dynbss)
-	 *(.bss)
-	 *(COMMON)
-	. = ALIGN(16); /* to speed clearing of bss up */
-	}
-	__bss_end = . ;
-	__bss_end = . ;
-	PROVIDE (end = .);
-
-/* Relocated into main memory */
-
-	/* Start of main memory */
-	/*. = 0x40000000;*/
-
-	.stack (NOLOAD)	: { *(.stack) }
-
-	/* PROM CODE */
-
-	/* global data in RAM passed to kernel after booting */
-
-
-	.stab 0		: { *(.stab) }
-	.stabstr 0		: { *(.stabstr) }
-	.stab.excl 0		: { *(.stab.excl) }
-	.stab.exclstr 0	: { *(.stab.exclstr) }
-	.stab.index 0		: { *(.stab.index) }
-	.stab.indexstr 0	: { *(.stab.indexstr) }
-	.comment 0		: { *(.comment) }
-
-}
diff --git a/arch/sparc/include/asm/arch-leon2/asi.h b/arch/sparc/include/asm/arch-leon2/asi.h
deleted file mode 100644
index 045bd77014be..000000000000
--- a/arch/sparc/include/asm/arch-leon2/asi.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* asi.h:  Address Space Identifier values for the LEON2 sparc.
- *
- * Copyright (C) 2008 Daniel Hellstrom (daniel at gaisler.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _LEON2_ASI_H
-#define _LEON2_ASI_H
-
-#define ASI_CACHEMISS		0x01	/* Force D-Cache miss on load (lda) */
-#define ASI_M_FLUSH_PROBE	0x03	/* MMU Flush/Probe */
-#define ASI_IFLUSH		0x05	/* Flush I-Cache */
-#define ASI_DFLUSH		0x06	/* Flush D-Cache */
-#define ASI_BYPASS		0x1c	/* Bypass MMU (Physical address) */
-#define ASI_MMUFLUSH		0x18	/* FLUSH TLB */
-#define ASI_M_MMUREGS		0x19	/* READ/Write MMU Registers */
-
-#endif	/* _LEON2_ASI_H */
diff --git a/arch/sparc/include/asm/arch-leon3/asi.h b/arch/sparc/include/asm/arch-leon3/asi.h
deleted file mode 100644
index 61ffcc4f746e..000000000000
--- a/arch/sparc/include/asm/arch-leon3/asi.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* asi.h:  Address Space Identifier values for the LEON3 sparc.
- *
- * Copyright (C) 2008 Daniel Hellstrom (daniel at gaisler.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _LEON3_ASI_H
-#define _LEON3_ASI_H
-
-#define ASI_CACHEMISS		0x01	/* Force D-Cache miss on load (lda) */
-#define ASI_M_FLUSH_PROBE	0x03	/* MMU Flush/Probe */
-#define ASI_IFLUSH		0x10	/* Flush I-Cache */
-#define ASI_DFLUSH		0x11	/* Flush D-Cache */
-#define ASI_BYPASS		0x1c	/* Bypass MMU (Physical address) */
-#define ASI_MMUFLUSH		0x18	/* FLUSH TLB */
-#define ASI_M_MMUREGS		0x19	/* READ/Write MMU Registers */
-
-#endif	/* _LEON3_ASI_H */
diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h
deleted file mode 100644
index 16942f42db90..000000000000
--- a/arch/sparc/include/asm/asi.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* Address Space Identifier (ASI) values for sparc processors.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _SPARC_ASI_H
-#define _SPARC_ASI_H
-
-/* ASI numbers are processor implementation specific */
-#include <asm/arch/asi.h>
-
-#endif	/* _SPARC_ASI_H */
diff --git a/arch/sparc/include/asm/asmmacro.h b/arch/sparc/include/asm/asmmacro.h
deleted file mode 100644
index 653f2e484858..000000000000
--- a/arch/sparc/include/asm/asmmacro.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* Assembler macros for SPARC
- *
- * (C) Copyright 2007, taken from linux asm-sparc/asmmacro.h
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_ASMMACRO_H__
-#define __SPARC_ASMMACRO_H__
-
-#include <config.h>
-
-/* All trap entry points _must_ begin with this macro or else you
- * lose.  It makes sure the kernel has a proper window so that
- * c-code can be called.
- */
-#define SAVE_ALL_HEAD \
-	sethi	%hi(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)), %l4; \
-	jmpl	%l4 + %lo(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)), %l6;
-#define SAVE_ALL \
-	SAVE_ALL_HEAD \
-	nop;
-
-/* All traps low-level code here must end with this macro. */
-#define RESTORE_ALL b ret_trap_entry; clr %l6;
-
-#endif
diff --git a/arch/sparc/include/asm/atomic.h b/arch/sparc/include/asm/atomic.h
deleted file mode 100644
index 35236d01f8d0..000000000000
--- a/arch/sparc/include/asm/atomic.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPARC atomic operations
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ASM_SPARC_ATOMIC_H_
-#define _ASM_SPARC_ATOMIC_H_
-
-#endif	/* _ASM_SPARC_ATOMIC_H_ */
diff --git a/arch/sparc/include/asm/bitops.h b/arch/sparc/include/asm/bitops.h
deleted file mode 100644
index c66f730c8882..000000000000
--- a/arch/sparc/include/asm/bitops.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Bit string operations on the SPARC
- *
- * (C) Copyright 2007, taken from asm-ppc/bitops.h
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _SPARC_BITOPS_H
-#define _SPARC_BITOPS_H
-
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/__ffs.h>
-
-#endif				/* _SPARC_BITOPS_H */
diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h
deleted file mode 100644
index bdc5e63f2188..000000000000
--- a/arch/sparc/include/asm/byteorder.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _SPARC_BYTEORDER_H
-#define _SPARC_BYTEORDER_H
-
-#include <asm/types.h>
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-#define __BYTEORDER_HAS_U64__
-#define __SWAB_64_THRU_32__
-#endif
-#include <linux/byteorder/big_endian.h>
-#endif				/* _SPARC_BYTEORDER_H */
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
deleted file mode 100644
index d9671d1c7497..000000000000
--- a/arch/sparc/include/asm/cache.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * (C) Copyright 2008,
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_CACHE_H__
-#define __SPARC_CACHE_H__
-
-#include <asm/processor.h>
-
-/*
- * If CONFIG_SYS_CACHELINE_SIZE is defined use it for DMA alignment.  Otherwise
- * use 32-bytes, the cacheline size for Sparc.
- */
-#ifdef CONFIG_SYS_CACHELINE_SIZE
-#define ARCH_DMA_MINALIGN	CONFIG_SYS_CACHELINE_SIZE
-#else
-#define ARCH_DMA_MINALIGN	32
-#endif
-
-#endif
diff --git a/arch/sparc/include/asm/config.h b/arch/sparc/include/asm/config.h
deleted file mode 100644
index 455fbc1b7329..000000000000
--- a/arch/sparc/include/asm/config.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Copyright 2015,
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _ASM_CONFIG_H_
-#define _ASM_CONFIG_H_
-
-#define CONFIG_SYS_GENERIC_GLOBAL_DATA
-#define CONFIG_NEEDS_MANUAL_RELOC
-
-#define CONFIG_LMB
-#define CONFIG_SYS_BOOT_RAMDISK_HIGH
-
-#define CONFIG_SYS_TIMER_RATE		1000000		/* 1MHz */
-#define CONFIG_SYS_TIMER_COUNTER	gd->arch.timer
-#define CONFIG_SYS_TIMER_COUNTS_DOWN
-
-#endif
diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h
deleted file mode 100644
index af38d17b0dd3..000000000000
--- a/arch/sparc/include/asm/global_data.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * (C) Copyright 2002-2010
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham, Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef	__ASM_GBL_DATA_H
-#define __ASM_GBL_DATA_H
-
-#include "asm/types.h"
-
-/* Architecture-specific global data */
-struct arch_global_data {
-	void *timer;
-	void *uart;
-	unsigned int uart_freq;
-#ifdef CONFIG_LEON3
-	unsigned int snooping_available;
-#endif
-};
-
-#include <asm-generic/global_data.h>
-
-#define DECLARE_GLOBAL_DATA_PTR     register volatile gd_t *gd asm ("%g7")
-
-#endif				/* __ASM_GBL_DATA_H */
diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h
deleted file mode 100644
index a317d132be28..000000000000
--- a/arch/sparc/include/asm/io.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/* SPARC I/O definitions
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _SPARC_IO_H
-#define _SPARC_IO_H
-
-/* Nothing to sync, total store ordering (TSO)... */
-#define sync()
-
-/*
- * Generic virtual read/write.
- */
-
-#ifndef CONFIG_SYS_HAS_NO_CACHE
-
-/* Forces a cache miss on read/load.
- * On some architectures we need to bypass the cache when reading
- * I/O registers so that we are not reading the same status word
- * over and over again resulting in a hang (until an IRQ if lucky)
- */
-
-#define __arch_getb(a)		SPARC_NOCACHE_READ_BYTE((unsigned int)(a))
-#define __arch_getw(a)		SPARC_NOCACHE_READ_HWORD((unsigned int)(a))
-#define __arch_getl(a)		SPARC_NOCACHE_READ((unsigned int)(a))
-#define __arch_getq(a)		SPARC_NOCACHE_READ_DWORD((unsigned int)(a))
-
-#else
-
-#define __arch_getb(a)		(*(volatile unsigned char *)(a))
-#define __arch_getw(a)		(*(volatile unsigned short *)(a))
-#define __arch_getl(a)		(*(volatile unsigned int *)(a))
-#define __arch_getq(a)		(*(volatile unsigned long long *)(a))
-
-#endif /* CONFIG_SYS_HAS_NO_CACHE */
-
-#define __arch_putb(v, a)	(*(volatile unsigned char *)(a) = (v))
-#define __arch_putw(v, a)	(*(volatile unsigned short *)(a) = (v))
-#define __arch_putl(v, a)	(*(volatile unsigned int *)(a) = (v))
-#define __arch_putq(v, a)	(*(volatile unsigned long long *)(a) = (v))
-
-#define __raw_writeb(v, a)		__arch_putb(v, a)
-#define __raw_writew(v, a)		__arch_putw(v, a)
-#define __raw_writel(v, a)		__arch_putl(v, a)
-#define __raw_writeq(v, a)		__arch_putq(v, a)
-
-#define __raw_readb(a)			__arch_getb(a)
-#define __raw_readw(a)			__arch_getw(a)
-#define __raw_readl(a)			__arch_getl(a)
-#define __raw_readq(a)			__arch_getq(a)
-
-#define writeb				__raw_writeb
-#define writew				__raw_writew
-#define writel				__raw_writel
-#define writeq				__raw_writeq
-
-#define readb				__raw_readb
-#define readw				__raw_readw
-#define readl				__raw_readl
-#define readq				__raw_readq
-
-/*
- * Given a physical address and a length, return a virtual address
- * that can be used to access the memory range with the caching
- * properties specified by "flags".
- */
-
-#define MAP_NOCACHE	(0)
-#define MAP_WRCOMBINE	(0)
-#define MAP_WRBACK	(0)
-#define MAP_WRTHROUGH	(0)
-
-static inline void *map_physmem(phys_addr_t paddr, unsigned long len,
-				unsigned long flags)
-{
-	return (void *)paddr;
-}
-
-/*
- * Take down a mapping set up by map_physmem().
- */
-static inline void unmap_physmem(void *vaddr, unsigned long flags)
-{
-
-}
-
-static inline phys_addr_t virt_to_phys(void * vaddr)
-{
-	return (phys_addr_t)(vaddr);
-}
-
-#endif
diff --git a/arch/sparc/include/asm/irq.h b/arch/sparc/include/asm/irq.h
deleted file mode 100644
index 5d0f7564e9b8..000000000000
--- a/arch/sparc/include/asm/irq.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* IRQ functions
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_IRQ_H__
-#define __SPARC_IRQ_H__
-
-#include <asm/psr.h>
-
-/* Set SPARC Processor Interrupt Level */
-static inline void set_pil(unsigned int level)
-{
-	unsigned int psr = get_psr();
-
-	put_psr((psr & ~PSR_PIL) | ((level & 0xf) << PSR_PIL_OFS));
-}
-
-/* Get SPARC Processor Interrupt Level */
-static inline unsigned int get_pil(void)
-{
-	unsigned int psr = get_psr();
-	return (psr & PSR_PIL) >> PSR_PIL_OFS;
-}
-
-/* Disables interrupts and return current PIL value */
-extern int intLock(void);
-
-/* Sets the PIL to oldLevel */
-extern void intUnlock(int oldLevel);
-
-/* Return non-zero if interrupts are currently enabled */
-extern int interrupt_is_enabled(void);
-
-#endif
diff --git a/arch/sparc/include/asm/leon.h b/arch/sparc/include/asm/leon.h
deleted file mode 100644
index cc7c7f349d6e..000000000000
--- a/arch/sparc/include/asm/leon.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* LEON Header File select
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __ASM_LEON_H__
-#define __ASM_LEON_H__
-
-#if defined(CONFIG_LEON3)
-
-#include <asm/leon3.h>
-
-#elif defined(CONFIG_LEON2)
-
-#include <asm/leon2.h>
-
-#else
-
-#error Unknown LEON processor
-
-#endif
-
-/* Common stuff */
-
-#endif
diff --git a/arch/sparc/include/asm/leon2.h b/arch/sparc/include/asm/leon2.h
deleted file mode 100644
index ffac0de1d2e6..000000000000
--- a/arch/sparc/include/asm/leon2.h
+++ /dev/null
@@ -1,222 +0,0 @@
-/* LEON2 header file. LEON2 is a SOC processor.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __LEON2_H__
-#define __LEON2_H__
-
-#ifdef CONFIG_LEON2
-
-/* LEON 2 I/O register definitions */
-#define LEON2_PREGS	0x80000000
-#define LEON2_MCFG1	0x00
-#define LEON2_MCFG2	0x04
-#define LEON2_ECTRL	0x08
-#define LEON2_FADDR	0x0C
-#define LEON2_MSTAT	0x10
-#define LEON2_CCTRL	0x14
-#define LEON2_PWDOWN	0x18
-#define LEON2_WPROT1	0x1C
-#define LEON2_WPROT2	0x20
-#define LEON2_LCONF	0x24
-#define LEON2_TCNT0	0x40
-#define LEON2_TRLD0	0x44
-#define LEON2_TCTRL0	0x48
-#define LEON2_TCNT1	0x50
-#define LEON2_TRLD1	0x54
-#define LEON2_TCTRL1	0x58
-#define LEON2_SCNT	0x60
-#define LEON2_SRLD	0x64
-#define LEON2_UART0	0x70
-#define LEON2_UDATA0	0x70
-#define LEON2_USTAT0	0x74
-#define LEON2_UCTRL0	0x78
-#define LEON2_USCAL0	0x7C
-#define LEON2_UART1	0x80
-#define LEON2_UDATA1	0x80
-#define LEON2_USTAT1	0x84
-#define LEON2_UCTRL1	0x88
-#define LEON2_USCAL1	0x8C
-#define LEON2_IMASK	0x90
-#define LEON2_IPEND	0x94
-#define LEON2_IFORCE	0x98
-#define LEON2_ICLEAR	0x9C
-#define LEON2_IOREG	0xA0
-#define LEON2_IODIR	0xA4
-#define LEON2_IOICONF	0xA8
-#define LEON2_IPEND2	0xB0
-#define LEON2_IMASK2	0xB4
-#define LEON2_ISTAT2	0xB8
-#define LEON2_ICLEAR2	0xBC
-
-#ifndef __ASSEMBLER__
-/*
- *  Structure for LEON memory mapped registers.
- *
- *  Source: Section 6.1 - On-chip registers
- *
- *  NOTE:  There is only one of these structures per CPU, its base address
- *         is 0x80000000, and the variable LEON_REG is placed there by the
- *         linkcmds file.
- */
-typedef struct {
-	volatile unsigned int Memory_Config_1;
-	volatile unsigned int Memory_Config_2;
-	volatile unsigned int Edac_Control;
-	volatile unsigned int Failed_Address;
-	volatile unsigned int Memory_Status;
-	volatile unsigned int Cache_Control;
-	volatile unsigned int Power_Down;
-	volatile unsigned int Write_Protection_1;
-	volatile unsigned int Write_Protection_2;
-	volatile unsigned int Leon_Configuration;
-	volatile unsigned int dummy2;
-	volatile unsigned int dummy3;
-	volatile unsigned int dummy4;
-	volatile unsigned int dummy5;
-	volatile unsigned int dummy6;
-	volatile unsigned int dummy7;
-	volatile unsigned int Timer_Counter_1;
-	volatile unsigned int Timer_Reload_1;
-	volatile unsigned int Timer_Control_1;
-	volatile unsigned int Watchdog;
-	volatile unsigned int Timer_Counter_2;
-	volatile unsigned int Timer_Reload_2;
-	volatile unsigned int Timer_Control_2;
-	volatile unsigned int dummy8;
-	volatile unsigned int Scaler_Counter;
-	volatile unsigned int Scaler_Reload;
-	volatile unsigned int dummy9;
-	volatile unsigned int dummy10;
-	volatile unsigned int UART_Channel_1;
-	volatile unsigned int UART_Status_1;
-	volatile unsigned int UART_Control_1;
-	volatile unsigned int UART_Scaler_1;
-	volatile unsigned int UART_Channel_2;
-	volatile unsigned int UART_Status_2;
-	volatile unsigned int UART_Control_2;
-	volatile unsigned int UART_Scaler_2;
-	volatile unsigned int Interrupt_Mask;
-	volatile unsigned int Interrupt_Pending;
-	volatile unsigned int Interrupt_Force;
-	volatile unsigned int Interrupt_Clear;
-	volatile unsigned int PIO_Data;
-	volatile unsigned int PIO_Direction;
-	volatile unsigned int PIO_Interrupt;
-} LEON2_regs;
-
-typedef struct {
-	volatile unsigned int UART_Channel;
-	volatile unsigned int UART_Status;
-	volatile unsigned int UART_Control;
-	volatile unsigned int UART_Scaler;
-} LEON2_Uart_regs;
-
-#endif
-
-/*
- *  The following constants are intended to be used ONLY in assembly
- *  language files.
- *
- *  NOTE:  The intended style of usage is to load the address of LEON REGS
- *         into a register and then use these as displacements from
- *         that register.
- */
-#define  LEON_REG_MEMCFG1_OFFSET                                  0x00
-#define  LEON_REG_MEMCFG2_OFFSET                                  0x04
-#define  LEON_REG_EDACCTRL_OFFSET                                 0x08
-#define  LEON_REG_FAILADDR_OFFSET                                 0x0C
-#define  LEON_REG_MEMSTATUS_OFFSET                                0x10
-#define  LEON_REG_CACHECTRL_OFFSET                                0x14
-#define  LEON_REG_POWERDOWN_OFFSET                                0x18
-#define  LEON_REG_WRITEPROT1_OFFSET                               0x1C
-#define  LEON_REG_WRITEPROT2_OFFSET                               0x20
-#define  LEON_REG_LEONCONF_OFFSET                                 0x24
-#define  LEON_REG_UNIMPLEMENTED_2_OFFSET                          0x28
-#define  LEON_REG_UNIMPLEMENTED_3_OFFSET                          0x2C
-#define  LEON_REG_UNIMPLEMENTED_4_OFFSET                          0x30
-#define  LEON_REG_UNIMPLEMENTED_5_OFFSET                          0x34
-#define  LEON_REG_UNIMPLEMENTED_6_OFFSET                          0x38
-#define  LEON_REG_UNIMPLEMENTED_7_OFFSET                          0x3C
-#define  LEON_REG_TIMERCNT1_OFFSET                                0x40
-#define  LEON_REG_TIMERLOAD1_OFFSET                               0x44
-#define  LEON_REG_TIMERCTRL1_OFFSET                               0x48
-#define  LEON_REG_WDOG_OFFSET                                     0x4C
-#define  LEON_REG_TIMERCNT2_OFFSET                                0x50
-#define  LEON_REG_TIMERLOAD2_OFFSET                               0x54
-#define  LEON_REG_TIMERCTRL2_OFFSET                               0x58
-#define  LEON_REG_UNIMPLEMENTED_8_OFFSET                          0x5C
-#define  LEON_REG_SCALERCNT_OFFSET                                0x60
-#define  LEON_REG_SCALER_LOAD_OFFSET                              0x64
-#define  LEON_REG_UNIMPLEMENTED_9_OFFSET                          0x68
-#define  LEON_REG_UNIMPLEMENTED_10_OFFSET                         0x6C
-#define  LEON_REG_UARTDATA1_OFFSET                                0x70
-#define  LEON_REG_UARTSTATUS1_OFFSET                              0x74
-#define  LEON_REG_UARTCTRL1_OFFSET                                0x78
-#define  LEON_REG_UARTSCALER1_OFFSET                              0x7C
-#define  LEON_REG_UARTDATA2_OFFSET                                0x80
-#define  LEON_REG_UARTSTATUS2_OFFSET                              0x84
-#define  LEON_REG_UARTCTRL2_OFFSET                                0x88
-#define  LEON_REG_UARTSCALER2_OFFSET                              0x8C
-#define  LEON_REG_IRQMASK_OFFSET                                  0x90
-#define  LEON_REG_IRQPEND_OFFSET                                  0x94
-#define  LEON_REG_IRQFORCE_OFFSET                                 0x98
-#define  LEON_REG_IRQCLEAR_OFFSET                                 0x9C
-#define  LEON_REG_PIODATA_OFFSET                                  0xA0
-#define  LEON_REG_PIODIR_OFFSET                                   0xA4
-#define  LEON_REG_PIOIRQ_OFFSET                                   0xA8
-#define  LEON_REG_SIM_RAM_SIZE_OFFSET                             0xF4
-#define  LEON_REG_SIM_ROM_SIZE_OFFSET                             0xF8
-
-/*
- *  Interrupt Sources
- *
- *  The interrupt source numbers directly map to the trap type and to
- *  the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
- *  and the Interrupt Pending Registers.
- */
-#define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR	1
-#define LEON_INTERRUPT_UART_1_RX_TX		2
-#define LEON_INTERRUPT_UART_0_RX_TX		3
-#define LEON_INTERRUPT_EXTERNAL_0		4
-#define LEON_INTERRUPT_EXTERNAL_1		5
-#define LEON_INTERRUPT_EXTERNAL_2		6
-#define LEON_INTERRUPT_EXTERNAL_3		7
-#define LEON_INTERRUPT_TIMER1			8
-#define LEON_INTERRUPT_TIMER2			9
-#define LEON_INTERRUPT_EMPTY1			10
-#define LEON_INTERRUPT_EMPTY2			11
-#define LEON_INTERRUPT_OPEN_ETH			12
-#define LEON_INTERRUPT_EMPTY4			13
-#define LEON_INTERRUPT_EMPTY5			14
-#define LEON_INTERRUPT_EMPTY6			15
-
-/* Timer Bits */
-#define LEON2_TIMER_CTRL_EN	0x1	/* Timer enable */
-#define LEON2_TIMER_CTRL_RS	0x2	/* Timer reStart  */
-#define LEON2_TIMER_CTRL_LD	0x4	/* Timer reLoad */
-#define LEON2_TIMER1_IRQNO	8	/* Timer 1 IRQ number */
-#define LEON2_TIMER2_IRQNO	9	/* Timer 2 IRQ number */
-#define LEON2_TIMER1_IE		(1<<LEON2_TIMER1_IRQNO)	/* Timer 1 interrupt enable */
-#define LEON2_TIMER2_IE		(1<<LEON2_TIMER2_IRQNO)	/* Timer 2 interrupt enable */
-
-/* UART bits */
-#define LEON2_UART_CTRL_RE	1	/* UART Receiver enable */
-#define LEON2_UART_CTRL_TE	2	/* UART Transmitter enable */
-#define LEON2_UART_CTRL_RI	4	/* UART Receiver Interrupt enable */
-#define LEON2_UART_CTRL_TI	8	/* UART Transmitter Interrupt enable */
-#define LEON2_UART_CTRL_DBG (1<<11)	/* Debug Bit used by GRMON */
-
-#define LEON2_UART_STAT_DR	1	/* UART Data Ready */
-#define LEON2_UART_STAT_TSE	2	/* UART Transmit Shift Reg empty */
-#define LEON2_UART_STAT_THE	4	/* UART Transmit Hold Reg empty */
-
-#else
-#error Include LEON2 header file only if LEON2 processor
-#endif
-
-#endif
diff --git a/arch/sparc/include/asm/leon3.h b/arch/sparc/include/asm/leon3.h
deleted file mode 100644
index a9f32b9b9090..000000000000
--- a/arch/sparc/include/asm/leon3.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* LEON3 header file. LEON3 is a free GPL SOC processor available
- * at www.gaisler.com.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __LEON3_H__
-#define __LEON3_H__
-
-#ifndef CONFIG_LEON3
-#error Include LEON3 header file only if LEON3 processor
-#endif
-
-/* Not much to define, most is Plug and Play and GRLIB dependent
- * not LEON3 dependent. See <ambapp.h> for GRLIB timers, interrupt
- * ctrl, memory controllers etc.
- */
-
-
-#ifndef __ASSEMBLER__
-/* The frequency of the CPU */
-extern unsigned int leon_cpu_freq;
-
-/* Number of LEON processors in system */
-extern int leon_cpu_cnt;
-
-/* Ver/subversion of CPU */
-extern int leon_ver;
-
-#endif /* __ASSEMBLER__ */
-
-#endif
diff --git a/arch/sparc/include/asm/linkage.h b/arch/sparc/include/asm/linkage.h
deleted file mode 100644
index e69de29bb2d1..000000000000
diff --git a/arch/sparc/include/asm/machines.h b/arch/sparc/include/asm/machines.h
deleted file mode 100644
index e209f3fa608d..000000000000
--- a/arch/sparc/include/asm/machines.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/* machines.h:  Defines for taking apart the machine type value in the
- *              idprom and determining the kind of machine we are on.
- *
- * Taken from the SPARC port of Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem at caip.rutgers.edu)
- * Copyright (C) 2007 Daniel Hellstrom (daniel at gaisler.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_MACHINES_H__
-#define __SPARC_MACHINES_H__
-
-struct Sun_Machine_Models {
-	char *name;
-	unsigned char id_machtype;
-};
-
-/* Current number of machines we know about that has an IDPROM
- * machtype entry including one entry for the 0x80 OBP machines.
- */
-#define NUM_SUN_MACHINES   16
-
-extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES];
-
-/* The machine type in the idprom area looks like this:
- *
- * ---------------
- * | ARCH | MACH |
- * ---------------
- *  7    4 3    0
- *
- * The ARCH field determines the architecture line (sun4, sun4c, etc).
- * The MACH field determines the machine make within that architecture.
- */
-
-#define SM_ARCH_MASK  0xf0
-#define SM_SUN4       0x20
-#define  M_LEON2      0x30
-#define SM_SUN4C      0x50
-#define SM_SUN4M      0x70
-#define SM_SUN4M_OBP  0x80
-
-#define SM_TYP_MASK   0x0f
-/* Sun4 machines */
-#define SM_4_260      0x01	/* Sun 4/200 series */
-#define SM_4_110      0x02	/* Sun 4/100 series */
-#define SM_4_330      0x03	/* Sun 4/300 series */
-#define SM_4_470      0x04	/* Sun 4/400 series */
-
-/* Leon machines */
-#define M_LEON2_SOC   0x01	/* Leon2 SoC */
-
-/* Sun4c machines                Full Name              - PROM NAME */
-#define SM_4C_SS1     0x01	/* Sun4c SparcStation 1   - Sun 4/60  */
-#define SM_4C_IPC     0x02	/* Sun4c SparcStation IPC - Sun 4/40  */
-#define SM_4C_SS1PLUS 0x03	/* Sun4c SparcStation 1+  - Sun 4/65  */
-#define SM_4C_SLC     0x04	/* Sun4c SparcStation SLC - Sun 4/20  */
-#define SM_4C_SS2     0x05	/* Sun4c SparcStation 2   - Sun 4/75  */
-#define SM_4C_ELC     0x06	/* Sun4c SparcStation ELC - Sun 4/25  */
-#define SM_4C_IPX     0x07	/* Sun4c SparcStation IPX - Sun 4/50  */
-
-/* Sun4m machines, these predate the OpenBoot.  These values only mean
- * something if the value in the ARCH field is SM_SUN4M, if it is
- * SM_SUN4M_OBP then you have the following situation:
- * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
- * 2) You have to consult OpenBoot to determine which machine this is.
- */
-#define SM_4M_SS60    0x01	/* Sun4m SparcSystem 600                  */
-#define SM_4M_SS50    0x02	/* Sun4m SparcStation 10                  */
-#define SM_4M_SS40    0x03	/* Sun4m SparcStation 5                   */
-
-/* Sun4d machines -- N/A */
-/* Sun4e machines -- N/A */
-/* Sun4u machines -- N/A */
-
-#endif				/* !(_SPARC_MACHINES_H) */
diff --git a/arch/sparc/include/asm/page.h b/arch/sparc/include/asm/page.h
deleted file mode 100644
index 181d1c195276..000000000000
--- a/arch/sparc/include/asm/page.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/* page.h:  Various defines and such for MMU operations on the Sparc for
- *          the Linux kernel.
- *
- * Copyright (C) 1995 David S. Miller (davem at caip.rutgers.edu)
- * Copyright (C) 2007 Daniel Hellstrom (daniel at gaisler.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _SPARC_PAGE_H
-#define _SPARC_PAGE_H
-
-#ifdef CONFIG_SUN4
-#define PAGE_SHIFT   13
-#else
-#define PAGE_SHIFT   12
-#endif
-
-#ifndef __ASSEMBLY__
-/* I have my suspicions... -DaveM */
-#define PAGE_SIZE    (1UL << PAGE_SHIFT)
-#else
-#define PAGE_SIZE    (1 << PAGE_SHIFT)
-#endif
-
-#define PAGE_MASK    (~(PAGE_SIZE-1))
-
-#endif				/* _SPARC_PAGE_H */
diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h
deleted file mode 100644
index 61d3bbc9a19a..000000000000
--- a/arch/sparc/include/asm/posix_types.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2007, taken from asm-ppc/posix_types.h
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_POSIX_TYPES_H__
-#define __SPARC_POSIX_TYPES_H__
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned int __kernel_dev_t;
-typedef unsigned int __kernel_ino_t;
-typedef unsigned int __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned int __kernel_uid_t;
-typedef unsigned int __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef long __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_daddr_t;
-typedef char *__kernel_caddr_t;
-typedef short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned int __kernel_old_uid_t;
-typedef unsigned int __kernel_old_gid_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-	int val[2];
-} __kernel_fsid_t;
-
-#ifndef __GNUC__
-
-#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-#define	__FD_ISSET(d, set)	((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
-#define	__FD_ZERO(set)	\
-  ((void) memset ((__ptr_t) (set), 0, sizeof (__kernel_fd_set)))
-
-#else				/* __GNUC__ */
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) \
-    || (__GLIBC__ == 2 && __GLIBC_MINOR__ == 0)
-/* With GNU C, use inline functions instead so args are evaluated only once: */
-
-#undef __FD_SET
-static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set * fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] |= (1UL << _rem);
-}
-
-#undef __FD_CLR
-static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set * fdsetp)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	fdsetp->fds_bits[_tmp] &= ~(1UL << _rem);
-}
-
-#undef __FD_ISSET
-static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set * p)
-{
-	unsigned long _tmp = fd / __NFDBITS;
-	unsigned long _rem = fd % __NFDBITS;
-	return (p->fds_bits[_tmp] & (1UL << _rem)) != 0;
-}
-
-/*
- * This will unroll the loop for the normal constant case (8 ints,
- * for a 256-bit fd_set)
- */
-#undef __FD_ZERO
-static __inline__ void __FD_ZERO(__kernel_fd_set * p)
-{
-	unsigned int *tmp = (unsigned int *)p->fds_bits;
-	int i;
-
-	if (__builtin_constant_p(__FDSET_LONGS)) {
-		switch (__FDSET_LONGS) {
-		case 8:
-			tmp[0] = 0;
-			tmp[1] = 0;
-			tmp[2] = 0;
-			tmp[3] = 0;
-			tmp[4] = 0;
-			tmp[5] = 0;
-			tmp[6] = 0;
-			tmp[7] = 0;
-			return;
-		}
-	}
-	i = __FDSET_LONGS;
-	while (i) {
-		i--;
-		*tmp = 0;
-		tmp++;
-	}
-}
-
-#endif				/* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-#endif				/* __GNUC__ */
-#endif				/* _SPARC_POSIX_TYPES_H */
diff --git a/arch/sparc/include/asm/processor.h b/arch/sparc/include/asm/processor.h
deleted file mode 100644
index 9a6535d30df1..000000000000
--- a/arch/sparc/include/asm/processor.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPARC Processor specifics
- * taken from the SPARC port of Linux (ptrace.h).
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __ASM_SPARC_PROCESSOR_H
-#define __ASM_SPARC_PROCESSOR_H
-
-#include <asm/arch/asi.h>
-
-#ifdef CONFIG_LEON
-
-/* All LEON processors supported */
-#include <asm/leon.h>
-
-#else
-/* other processors */
-#error Unknown SPARC Processor
-#endif
-
-#ifndef __ASSEMBLY__
-
-/* flush data cache */
-static __inline__ void sparc_dcache_flush_all(void)
-{
-      __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_DFLUSH):"memory");
-}
-
-/* flush instruction cache */
-static __inline__ void sparc_icache_flush_all(void)
-{
-      __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"::"i"(ASI_IFLUSH):"memory");
-}
-
-/* do a cache miss load */
-static __inline__ unsigned long long sparc_load_reg_cachemiss_qword(unsigned
-								    long paddr)
-{
-	unsigned long long retval;
-	__asm__ __volatile__("ldda [%1] %2, %0\n\t":
-			     "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
-	return retval;
-}
-
-static __inline__ unsigned long sparc_load_reg_cachemiss(unsigned long paddr)
-{
-	unsigned long retval;
-	__asm__ __volatile__("lda [%1] %2, %0\n\t":
-			     "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
-	return retval;
-}
-
-static __inline__ unsigned short sparc_load_reg_cachemiss_word(unsigned long
-							       paddr)
-{
-	unsigned short retval;
-	__asm__ __volatile__("lduha [%1] %2, %0\n\t":
-			     "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
-	return retval;
-}
-
-static __inline__ unsigned char sparc_load_reg_cachemiss_byte(unsigned long
-							      paddr)
-{
-	unsigned char retval;
-	__asm__ __volatile__("lduba [%1] %2, %0\n\t":
-			     "=r"(retval):"r"(paddr), "i"(ASI_CACHEMISS));
-	return retval;
-}
-
-/* do a physical address bypass write, i.e. for 0x80000000 */
-static __inline__ void sparc_store_reg_bypass(unsigned long paddr,
-					      unsigned long value)
-{
-	__asm__ __volatile__("sta %0, [%1] %2\n\t"::"r"(value), "r"(paddr),
-			     "i"(ASI_BYPASS):"memory");
-}
-
-static __inline__ unsigned long sparc_load_reg_bypass(unsigned long paddr)
-{
-	unsigned long retval;
-	__asm__ __volatile__("lda [%1] %2, %0\n\t":
-			     "=r"(retval):"r"(paddr), "i"(ASI_BYPASS));
-	return retval;
-}
-
-/* Macros for bypassing cache when reading */
-#define SPARC_NOCACHE_READ_DWORD(address) sparc_load_reg_cachemiss_qword((unsigned int)(address))
-#define SPARC_NOCACHE_READ(address)       sparc_load_reg_cachemiss((unsigned int)(address))
-#define SPARC_NOCACHE_READ_HWORD(address) sparc_load_reg_cachemiss_word((unsigned int)(address))
-#define SPARC_NOCACHE_READ_BYTE(address)  sparc_load_reg_cachemiss_byte((unsigned int)(address))
-
-#define SPARC_BYPASS_READ(address)        sparc_load_reg_bypass((unsigned int)(address))
-#define SPARC_BYPASS_WRITE(address,value) sparc_store_reg_bypass((unsigned int)(address),(unsigned int)(value))
-
-#endif
-
-#endif				/* __ASM_SPARC_PROCESSOR_H */
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
deleted file mode 100644
index 8906ef6cc79f..000000000000
--- a/arch/sparc/include/asm/prom.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/* OpenProm defines mainly taken from linux kernel header files
- *
- * openprom.h:  Prom structures and defines for access to the OPENBOOT
- *              prom routines and data areas.
- *
- * Copyright (C) 1995 David S. Miller (davem at caip.rutgers.edu)
- * Copyright (C) 2007 Daniel Hellstrom (daniel at gaisler.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_OPENPROM_H__
-#define __SPARC_OPENPROM_H__
-
-/* Empirical constants... */
-#define	LINUX_OPPROM_MAGIC      0x10010407
-
-#ifndef __ASSEMBLY__
-/* V0 prom device operations. */
-struct linux_dev_v0_funcs {
-	int (*v0_devopen) (char *device_str);
-	int (*v0_devclose) (int dev_desc);
-	int (*v0_rdblkdev) (int dev_desc, int num_blks, int blk_st, char *buf);
-	int (*v0_wrblkdev) (int dev_desc, int num_blks, int blk_st, char *buf);
-	int (*v0_wrnetdev) (int dev_desc, int num_bytes, char *buf);
-	int (*v0_rdnetdev) (int dev_desc, int num_bytes, char *buf);
-	int (*v0_rdchardev) (int dev_desc, int num_bytes, int dummy, char *buf);
-	int (*v0_wrchardev) (int dev_desc, int num_bytes, int dummy, char *buf);
-	int (*v0_seekdev) (int dev_desc, long logical_offst, int from);
-};
-
-/* V2 and later prom device operations. */
-struct linux_dev_v2_funcs {
-	int (*v2_inst2pkg) (int d);	/* Convert ihandle to phandle */
-	char *(*v2_dumb_mem_alloc) (char *va, unsigned sz);
-	void (*v2_dumb_mem_free) (char *va, unsigned sz);
-
-	/* To map devices into virtual I/O space. */
-	char *(*v2_dumb_mmap) (char *virta, int which_io, unsigned paddr,
-			       unsigned sz);
-	void (*v2_dumb_munmap) (char *virta, unsigned size);
-
-	int (*v2_dev_open) (char *devpath);
-	void (*v2_dev_close) (int d);
-	int (*v2_dev_read) (int d, char *buf, int nbytes);
-	int (*v2_dev_write) (int d, char *buf, int nbytes);
-	int (*v2_dev_seek) (int d, int hi, int lo);
-
-	/* Never issued (multistage load support) */
-	void (*v2_wheee2) (void);
-	void (*v2_wheee3) (void);
-};
-
-struct linux_mlist_v0 {
-	struct linux_mlist_v0 *theres_more;
-	char *start_adr;
-	unsigned num_bytes;
-};
-
-struct linux_mem_v0 {
-	struct linux_mlist_v0 **v0_totphys;
-	struct linux_mlist_v0 **v0_prommap;
-	struct linux_mlist_v0 **v0_available;	/* What we can use */
-};
-
-/* Arguments sent to the kernel from the boot prompt. */
-struct linux_arguments_v0 {
-	char * const argv[8];
-	char args[100];
-	char boot_dev[2];
-	int boot_dev_ctrl;
-	int boot_dev_unit;
-	int dev_partition;
-	char *kernel_file_name;
-	void *aieee1;		/* XXX */
-};
-
-/* V2 and up boot things. */
-struct linux_bootargs_v2 {
-	char **bootpath;
-	char **bootargs;
-	int *fd_stdin;
-	int *fd_stdout;
-};
-
-/* The top level PROM vector. */
-struct linux_romvec {
-	/* Version numbers. */
-	unsigned int pv_magic_cookie;
-	unsigned int pv_romvers;
-	unsigned int pv_plugin_revision;
-	unsigned int pv_printrev;
-
-	/* Version 0 memory descriptors. */
-	struct linux_mem_v0 pv_v0mem;
-
-	/* Node operations. */
-	struct linux_nodeops *pv_nodeops;
-
-	char **pv_bootstr;
-	struct linux_dev_v0_funcs pv_v0devops;
-
-	char *pv_stdin;
-	char *pv_stdout;
-#define	PROMDEV_KBD	0	/* input from keyboard */
-#define	PROMDEV_SCREEN	0	/* output to screen */
-#define	PROMDEV_TTYA	1	/* in/out to ttya */
-#define	PROMDEV_TTYB	2	/* in/out to ttyb */
-
-	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
-	int (*pv_getchar) (void);
-	void (*pv_putchar) (int ch);
-
-	/* Non-blocking variants. */
-	int (*pv_nbgetchar) (void);
-	int (*pv_nbputchar) (int ch);
-
-	void (*pv_putstr) (char *str, int len);
-
-	/* Miscellany. */
-	void (*pv_reboot) (char *bootstr);
-	void (*pv_printf) (__const__ char *fmt, ...);
-	void (*pv_abort) (void);
-	__volatile__ int *pv_ticks;
-	void (*pv_halt) (void);
-	void (**pv_synchook) (void);
-
-	/* Evaluate a forth string, not different proto for V0 and V2->up. */
-	union {
-		void (*v0_eval) (int len, char *str);
-		void (*v2_eval) (char *str);
-	} pv_fortheval;
-
-	struct linux_arguments_v0 **pv_v0bootargs;
-
-	/* Get ether address. */
-	unsigned int (*pv_enaddr) (int d, char *enaddr);
-
-	struct linux_bootargs_v2 pv_v2bootargs;
-	struct linux_dev_v2_funcs pv_v2devops;
-
-	int filler[15];
-
-	/* This one is sun4c/sun4 only. */
-	void (*pv_setctxt) (int ctxt, char *va, int pmeg);
-
-	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
-	 * No joke. Calling these when there is only one cpu probably
-	 * crashes the machine, have to test this. :-)
-	 */
-
-	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
-	 * 'thiscontext' executing at address 'prog_counter'
-	 */
-	int (*v3_cpustart) (unsigned int whichcpu, int ctxtbl_ptr,
-			    int thiscontext, char *prog_counter);
-
-	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
-	 * until a resume cpu call is made.
-	 */
-	int (*v3_cpustop) (unsigned int whichcpu);
-
-	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
-	 * resume cpu call is made.
-	 */
-	int (*v3_cpuidle) (unsigned int whichcpu);
-
-	/* v3_cpuresume() will resume processor 'whichcpu' executing
-	 * starting with whatever 'pc' and 'npc' were left at the
-	 * last 'idle' or 'stop' call.
-	 */
-	int (*v3_cpuresume) (unsigned int whichcpu);
-};
-
-/* Routines for traversing the prom device tree. */
-struct linux_nodeops {
-	int (*no_nextnode) (int node);
-	int (*no_child) (int node);
-	int (*no_proplen) (int node, char *name);
-	int (*no_getprop) (int node, char *name, char *val);
-	int (*no_setprop) (int node, char *name, char *val, int len);
-	char *(*no_nextprop) (int node, char *name);
-};
-
-/* More fun PROM structures for device probing. */
-#define PROMREG_MAX     16
-#define PROMVADDR_MAX   16
-#define PROMINTR_MAX    15
-
-struct linux_prom_registers {
-	unsigned int which_io;	/* is this in OBIO space? */
-	unsigned int phys_addr;	/* The physical address of this register */
-	unsigned int reg_size;	/* How many bytes does this register take up? */
-};
-
-struct linux_prom_irqs {
-	int pri;		/* IRQ priority */
-	int vector;		/* This is foobar, what does it do? */
-};
-
-/* Element of the "ranges" vector */
-struct linux_prom_ranges {
-	unsigned int ot_child_space;
-	unsigned int ot_child_base;	/* Bus feels this */
-	unsigned int ot_parent_space;
-	unsigned int ot_parent_base;	/* CPU looks from here */
-	unsigned int or_size;
-};
-
-/* Ranges and reg properties are a bit different for PCI. */
-struct linux_prom_pci_registers {
-	/*
-	 * We don't know what information this field contain.
-	 * We guess, PCI device function is in bits 15:8
-	 * So, ...
-	 */
-	unsigned int which_io;	/* Let it be which_io */
-
-	unsigned int phys_hi;
-	unsigned int phys_lo;
-
-	unsigned int size_hi;
-	unsigned int size_lo;
-};
-
-struct linux_prom_pci_ranges {
-	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
-	unsigned int child_phys_mid;
-	unsigned int child_phys_lo;
-
-	unsigned int parent_phys_hi;
-	unsigned int parent_phys_lo;
-
-	unsigned int size_hi;
-	unsigned int size_lo;
-};
-
-struct linux_prom_pci_assigned_addresses {
-	unsigned int which_io;
-
-	unsigned int phys_hi;
-	unsigned int phys_lo;
-
-	unsigned int size_hi;
-	unsigned int size_lo;
-};
-
-struct linux_prom_ebus_ranges {
-	unsigned int child_phys_hi;
-	unsigned int child_phys_lo;
-
-	unsigned int parent_phys_hi;
-	unsigned int parent_phys_mid;
-	unsigned int parent_phys_lo;
-
-	unsigned int size;
-};
-
-/* Offset into the EEPROM where the id PROM is located on the 4c */
-#define IDPROM_OFFSET  0x7d8
-
-/* On sun4m; physical. */
-/* MicroSPARC(-II) does not decode 31rd bit, but it works. */
-#define IDPROM_OFFSET_M  0xfd8
-
-struct idprom {
-	unsigned char id_format;	/* Format identifier (always 0x01) */
-	unsigned char id_machtype;	/* Machine type */
-	unsigned char id_ethaddr[6];	/* Hardware ethernet address */
-	long id_date;		/* Date of manufacture */
-	unsigned int id_sernum:24;	/* Unique serial number */
-	unsigned char id_cksum;	/* Checksum - xor of the data bytes */
-	unsigned char reserved[16];
-};
-
-extern struct idprom *idprom;
-extern void idprom_init(void);
-
-#define IDPROM_SIZE  (sizeof(struct idprom))
-
-#endif				/* !(__ASSEMBLY__) */
-
-#endif
diff --git a/arch/sparc/include/asm/psr.h b/arch/sparc/include/asm/psr.h
deleted file mode 100644
index a91bdc903cb5..000000000000
--- a/arch/sparc/include/asm/psr.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* psr.h: This file holds the macros for masking off various parts of
- *        the processor status register on the Sparc. This is valid
- *        for Version 8. On the V9 this is renamed to the PSTATE
- *        register and its members are accessed as fields like
- *        PSTATE.PRIV for the current CPU privilege level.
- *
- * taken from the SPARC port of Linux,
- *
- * Copyright (C) 1994 David S. Miller (davem at caip.rutgers.edu)
- * Copyright (C) 2007 Daniel Hellstrom (daniel at gaisler.com)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_PSR_H__
-#define __SPARC_PSR_H__
-
-/* The Sparc PSR fields are laid out as the following:
- *
- *  ------------------------------------------------------------------------
- *  | impl  | vers  | icc   | resv  | EC | EF | PIL  | S | PS | ET |  CWP  |
- *  | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6  | 5  |  4-0  |
- *  ------------------------------------------------------------------------
- */
-#define PSR_CWP     0x0000001f	/* current window pointer     */
-#define PSR_ET      0x00000020	/* enable traps field         */
-#define PSR_PS      0x00000040	/* previous privilege level   */
-#define PSR_S       0x00000080	/* current privilege level    */
-#define PSR_PIL     0x00000f00	/* processor interrupt level  */
-#define PSR_EF      0x00001000	/* enable floating point      */
-#define PSR_EC      0x00002000	/* enable co-processor        */
-#define PSR_LE      0x00008000	/* SuperSparcII little-endian */
-#define PSR_ICC     0x00f00000	/* integer condition codes    */
-#define PSR_C       0x00100000	/* carry bit                  */
-#define PSR_V       0x00200000	/* overflow bit               */
-#define PSR_Z       0x00400000	/* zero bit                   */
-#define PSR_N       0x00800000	/* negative bit               */
-#define PSR_VERS    0x0f000000	/* cpu-version field          */
-#define PSR_IMPL    0xf0000000	/* cpu-implementation field   */
-
-#define PSR_PIL_OFS  8
-
-#ifndef __ASSEMBLY__
-/* Get the %psr register. */
-static __inline__ unsigned int get_psr(void)
-{
-	unsigned int psr;
-	__asm__ __volatile__("rd	%%psr, %0\n\t"
-			     "nop\n\t" "nop\n\t" "nop\n\t":"=r"(psr)
-			     :	/* no inputs */
-			     :"memory");
-
-	return psr;
-}
-
-static __inline__ void put_psr(unsigned int new_psr)
-{
-	__asm__ __volatile__("wr	%0, 0x0, %%psr\n\t" "nop\n\t" "nop\n\t" "nop\n\t":	/* no outputs */
-			     :"r"(new_psr)
-			     :"memory", "cc");
-}
-
-/* Get the %fsr register.  Be careful, make sure the floating point
- * enable bit is set in the %psr when you execute this or you will
- * incur a trap.
- */
-
-extern unsigned int fsr_storage;
-
-static __inline__ unsigned int get_fsr(void)
-{
-	unsigned int fsr = 0;
-
-	__asm__ __volatile__("st	%%fsr, %1\n\t"
-			     "ld	%1, %0\n\t":"=r"(fsr)
-			     :"m"(fsr_storage));
-
-	return fsr;
-}
-
-#endif				/* !(__ASSEMBLY__) */
-
-#endif				/* !(__SPARC_PSR_H__) */
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
deleted file mode 100644
index 33cfbacb0c65..000000000000
--- a/arch/sparc/include/asm/ptrace.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/* Contain the Stack frame layout on interrupt. pt_regs.
- * taken from the SPARC port of Linux (ptrace.h).
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_PTRACE_H__
-#define __SPARC_PTRACE_H__
-
-#include <asm/psr.h>
-
-/* This struct defines the way the registers are stored on the
- * stack during a system call and basically all traps.
- */
-
-#ifndef __ASSEMBLY__
-
-struct pt_regs {
-	unsigned long psr;
-	unsigned long pc;
-	unsigned long npc;
-	unsigned long y;
-	unsigned long u_regs[16];	/* globals and ins */
-};
-
-#define UREG_G0        0
-#define UREG_G1        1
-#define UREG_G2        2
-#define UREG_G3        3
-#define UREG_G4        4
-#define UREG_G5        5
-#define UREG_G6        6
-#define UREG_G7        7
-#define UREG_I0        8
-#define UREG_I1        9
-#define UREG_I2        10
-#define UREG_I3        11
-#define UREG_I4        12
-#define UREG_I5        13
-#define UREG_I6        14
-#define UREG_I7        15
-#define UREG_WIM       UREG_G0
-#define UREG_FADDR     UREG_G0
-#define UREG_FP        UREG_I6
-#define UREG_RETPC     UREG_I7
-
-/* A register window */
-struct reg_window {
-	unsigned long locals[8];
-	unsigned long ins[8];
-};
-
-/* A Sparc stack frame */
-struct sparc_stackf {
-	unsigned long locals[8];
-	unsigned long ins[6];
-	struct sparc_stackf *fp;
-	unsigned long callers_pc;
-	char *structptr;
-	unsigned long xargs[6];
-	unsigned long xxargs[1];
-};
-
-#define TRACEREG_SZ   sizeof(struct pt_regs)
-#define STACKFRAME_SZ sizeof(struct sparc_stackf)
-
-#else				/* __ASSEMBLY__ */
-/* For assembly code. */
-#define TRACEREG_SZ       0x50
-#define STACKFRAME_SZ     0x60
-#endif
-
-/*
- * The asm_offsets.h is a generated file, so we cannot include it.
- * It may be OK for glibc headers, but it's utterly pointless for C code.
- * The assembly code using those offsets has to include it explicitly.
- */
-/* #include <asm/asm_offsets.h> */
-
-/* These are for pt_regs. */
-#define PT_PSR    0x0
-#define PT_PC     0x4
-#define PT_NPC    0x8
-#define PT_Y      0xc
-#define PT_G0     0x10
-#define PT_WIM    PT_G0
-#define PT_G1     0x14
-#define PT_G2     0x18
-#define PT_G3     0x1c
-#define PT_G4     0x20
-#define PT_G5     0x24
-#define PT_G6     0x28
-#define PT_G7     0x2c
-#define PT_I0     0x30
-#define PT_I1     0x34
-#define PT_I2     0x38
-#define PT_I3     0x3c
-#define PT_I4     0x40
-#define PT_I5     0x44
-#define PT_I6     0x48
-#define PT_FP     PT_I6
-#define PT_I7     0x4c
-
-/* Reg_window offsets */
-#define RW_L0     0x00
-#define RW_L1     0x04
-#define RW_L2     0x08
-#define RW_L3     0x0c
-#define RW_L4     0x10
-#define RW_L5     0x14
-#define RW_L6     0x18
-#define RW_L7     0x1c
-#define RW_I0     0x20
-#define RW_I1     0x24
-#define RW_I2     0x28
-#define RW_I3     0x2c
-#define RW_I4     0x30
-#define RW_I5     0x34
-#define RW_I6     0x38
-#define RW_I7     0x3c
-
-/* Stack_frame offsets */
-#define SF_L0     0x00
-#define SF_L1     0x04
-#define SF_L2     0x08
-#define SF_L3     0x0c
-#define SF_L4     0x10
-#define SF_L5     0x14
-#define SF_L6     0x18
-#define SF_L7     0x1c
-#define SF_I0     0x20
-#define SF_I1     0x24
-#define SF_I2     0x28
-#define SF_I3     0x2c
-#define SF_I4     0x30
-#define SF_I5     0x34
-#define SF_FP     0x38
-#define SF_PC     0x3c
-#define SF_RETP   0x40
-#define SF_XARG0  0x44
-#define SF_XARG1  0x48
-#define SF_XARG2  0x4c
-#define SF_XARG3  0x50
-#define SF_XARG4  0x54
-#define SF_XARG5  0x58
-#define SF_XXARG  0x5c
-
-/* Stuff for the ptrace system call */
-#define PTRACE_SUNATTACH          10
-#define PTRACE_SUNDETACH          11
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_READDATA           16
-#define PTRACE_WRITEDATA          17
-#define PTRACE_READTEXT           18
-#define PTRACE_WRITETEXT          19
-#define PTRACE_GETFPAREGS         20
-#define PTRACE_SETFPAREGS         21
-
-#define PTRACE_GETUCODE           29	/* stupid bsd-ism */
-
-#endif				/* !(_SPARC_PTRACE_H) */
diff --git a/arch/sparc/include/asm/sections.h b/arch/sparc/include/asm/sections.h
deleted file mode 100644
index 65ad891ddecd..000000000000
--- a/arch/sparc/include/asm/sections.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * Copyright (c) 2012 The Chromium OS Authors.
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __ASM_SPARC_SECTIONS_H
-#define __ASM_SPARC_SECTIONS_H
-
-#include <asm-generic/sections.h>
-
-#endif
diff --git a/arch/sparc/include/asm/srmmu.h b/arch/sparc/include/asm/srmmu.h
deleted file mode 100644
index 8da2f67f1ce9..000000000000
--- a/arch/sparc/include/asm/srmmu.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/* SRMMU page table defines and code,
- * taken from the SPARC port of Linux
- *
- * Copyright (C) 2007 Daniel Hellstrom (daniel at gaisler.com)
- * Copyright (C) 1995 David S. Miller (davem at caip.rutgers.edu)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_SRMMU_H__
-#define __SPARC_SRMMU_H__
-
-#include <asm/asi.h>
-#include <asm/page.h>
-
-/* Number of contexts is implementation-dependent; 64k is the most we support */
-#define SRMMU_MAX_CONTEXTS	65536
-
-/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
-#define SRMMU_REAL_PMD_SHIFT		18
-#define SRMMU_REAL_PMD_SIZE		(1UL << SRMMU_REAL_PMD_SHIFT)
-#define SRMMU_REAL_PMD_MASK		(~(SRMMU_REAL_PMD_SIZE-1))
-#define SRMMU_REAL_PMD_ALIGN(__addr)	(((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define SRMMU_PGDIR_SHIFT       24
-#define SRMMU_PGDIR_SIZE        (1UL << SRMMU_PGDIR_SHIFT)
-#define SRMMU_PGDIR_MASK        (~(SRMMU_PGDIR_SIZE-1))
-#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
-
-#define SRMMU_REAL_PTRS_PER_PTE	64
-#define SRMMU_REAL_PTRS_PER_PMD	64
-#define SRMMU_PTRS_PER_PGD	256
-
-#define SRMMU_REAL_PTE_TABLE_SIZE	(SRMMU_REAL_PTRS_PER_PTE*4)
-#define SRMMU_PMD_TABLE_SIZE		(SRMMU_REAL_PTRS_PER_PMD*4)
-#define SRMMU_PGD_TABLE_SIZE		(SRMMU_PTRS_PER_PGD*4)
-
-/*
- * To support pagetables in highmem, Linux introduces APIs which
- * return struct page* and generally manipulate page tables when
- * they are not mapped into kernel space. Our hardware page tables
- * are smaller than pages. We lump hardware tabes into big, page sized
- * software tables.
- *
- * PMD_SHIFT determines the size of the area a second-level page table entry
- * can map, and our pmd_t is 16 times larger than normal.  The values which
- * were once defined here are now generic for 4c and srmmu, so they're
- * found in pgtable.h.
- */
-#define SRMMU_PTRS_PER_PMD	4
-
-/* Definition of the values in the ET field of PTD's and PTE's */
-#define SRMMU_ET_MASK         0x3
-#define SRMMU_ET_INVALID      0x0
-#define SRMMU_ET_PTD          0x1
-#define SRMMU_ET_PTE          0x2
-#define SRMMU_ET_REPTE        0x3	/* AIEEE, SuperSparc II reverse endian page! */
-
-/* Physical page extraction from PTP's and PTE's. */
-#define SRMMU_CTX_PMASK    0xfffffff0
-#define SRMMU_PTD_PMASK    0xfffffff0
-#define SRMMU_PTE_PMASK    0xffffff00
-
-/* The pte non-page bits.  Some notes:
- * 1) cache, dirty, valid, and ref are frobbable
- *    for both supervisor and user pages.
- * 2) exec and write will only give the desired effect
- *    on user pages
- * 3) use priv and priv_readonly for changing the
- *    characteristics of supervisor ptes
- */
-#define SRMMU_CACHE        0x80
-#define SRMMU_DIRTY        0x40
-#define SRMMU_REF          0x20
-#define SRMMU_NOREAD       0x10
-#define SRMMU_EXEC         0x08
-#define SRMMU_WRITE        0x04
-#define SRMMU_VALID        0x02	/* SRMMU_ET_PTE */
-#define SRMMU_PRIV         0x1c
-#define SRMMU_PRIV_RDONLY  0x18
-
-#define SRMMU_FILE         0x40	/* Implemented in software */
-
-#define SRMMU_PTE_FILE_SHIFT     8	/* == 32-PTE_FILE_MAX_BITS */
-
-#define SRMMU_CHG_MASK    (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
-
-/* SRMMU swap entry encoding
- *
- * We use 5 bits for the type and 19 for the offset.  This gives us
- * 32 swapfiles of 4GB each.  Encoding looks like:
- *
- * oooooooooooooooooootttttRRRRRRRR
- * fedcba9876543210fedcba9876543210
- *
- * The bottom 8 bits are reserved for protection and status bits, especially
- * FILE and PRESENT.
- */
-#define SRMMU_SWP_TYPE_MASK	0x1f
-#define SRMMU_SWP_TYPE_SHIFT	SRMMU_PTE_FILE_SHIFT
-#define SRMMU_SWP_OFF_MASK	0x7ffff
-#define SRMMU_SWP_OFF_SHIFT	(SRMMU_PTE_FILE_SHIFT + 5)
-
-/* Some day I will implement true fine grained access bits for
- * user pages because the SRMMU gives us the capabilities to
- * enforce all the protection levels that vma's can have.
- * XXX But for now...
- */
-#define SRMMU_PAGE_NONE    __pgprot(SRMMU_CACHE | \
-				    SRMMU_PRIV | SRMMU_REF)
-#define SRMMU_PAGE_SHARED  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
-				    SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
-#define SRMMU_PAGE_COPY    __pgprot(SRMMU_VALID | SRMMU_CACHE | \
-				    SRMMU_EXEC | SRMMU_REF)
-#define SRMMU_PAGE_RDONLY  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
-				    SRMMU_EXEC | SRMMU_REF)
-#define SRMMU_PAGE_KERNEL  __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
-				    SRMMU_DIRTY | SRMMU_REF)
-
-/* SRMMU Register addresses in ASI 0x4.  These are valid for all
- * current SRMMU implementations that exist.
- */
-#define SRMMU_CTRL_REG           0x00000000
-#define SRMMU_CTXTBL_PTR         0x00000100
-#define SRMMU_CTX_REG            0x00000200
-#define SRMMU_FAULT_STATUS       0x00000300
-#define SRMMU_FAULT_ADDR         0x00000400
-
-#define WINDOW_FLUSH(tmp1, tmp2)					\
-	mov	0, tmp1;						\
-98:	ld	[%g6 + TI_UWINMASK], tmp2;				\
-	orcc	%g0, tmp2, %g0;						\
-	add	tmp1, 1, tmp1;						\
-	bne	98b;							\
-	 save	%sp, -64, %sp;						\
-99:	subcc	tmp1, 1, tmp1;						\
-	bne	99b;							\
-	 restore %g0, %g0, %g0;
-
-#ifndef __ASSEMBLY__
-
-/* This makes sense. Honest it does - Anton */
-/* XXX Yes but it's ugly as sin.  FIXME. -KMW */
-extern void *srmmu_nocache_pool;
-#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
-#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
-#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
-
-/* Accessing the MMU control register. */
-static __inline__ unsigned int srmmu_get_mmureg(void)
-{
-	unsigned int retval;
-	__asm__ __volatile__("lda [%%g0] %1, %0\n\t":
-			     "=r"(retval):"i"(ASI_M_MMUREGS));
-	return retval;
-}
-
-static __inline__ void srmmu_set_mmureg(unsigned long regval)
-{
-	__asm__ __volatile__("sta %0, [%%g0] %1\n\t"::"r"(regval),
-			     "i"(ASI_M_MMUREGS):"memory");
-
-}
-
-static __inline__ void srmmu_set_ctable_ptr(unsigned long paddr)
-{
-	paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
-	__asm__ __volatile__("sta %0, [%1] %2\n\t"::"r"(paddr),
-			     "r"(SRMMU_CTXTBL_PTR),
-			     "i"(ASI_M_MMUREGS):"memory");
-}
-
-static __inline__ unsigned long srmmu_get_ctable_ptr(void)
-{
-	unsigned int retval;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t":
-			     "=r"(retval):
-			     "r"(SRMMU_CTXTBL_PTR), "i"(ASI_M_MMUREGS));
-	return (retval & SRMMU_CTX_PMASK) << 4;
-}
-
-static __inline__ void srmmu_set_context(int context)
-{
-	__asm__ __volatile__("sta %0, [%1] %2\n\t"::"r"(context),
-			     "r"(SRMMU_CTX_REG), "i"(ASI_M_MMUREGS):"memory");
-}
-
-static __inline__ int srmmu_get_context(void)
-{
-	register int retval;
-	__asm__ __volatile__("lda [%1] %2, %0\n\t":
-			     "=r"(retval):
-			     "r"(SRMMU_CTX_REG), "i"(ASI_M_MMUREGS));
-	return retval;
-}
-
-static __inline__ unsigned int srmmu_get_fstatus(void)
-{
-	unsigned int retval;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t":
-			     "=r"(retval):
-			     "r"(SRMMU_FAULT_STATUS), "i"(ASI_M_MMUREGS));
-	return retval;
-}
-
-static __inline__ unsigned int srmmu_get_faddr(void)
-{
-	unsigned int retval;
-
-	__asm__ __volatile__("lda [%1] %2, %0\n\t":
-			     "=r"(retval):
-			     "r"(SRMMU_FAULT_ADDR), "i"(ASI_M_MMUREGS));
-	return retval;
-}
-
-/* This is guaranteed on all SRMMU's. */
-static __inline__ void srmmu_flush_whole_tlb(void)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x400),	/* Flush entire TLB!! */
-			     "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-/* These flush types are not available on all chips... */
-static __inline__ void srmmu_flush_tlb_ctx(void)
-{
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(0x300),	/* Flush TLB ctx.. */
-			     "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-static __inline__ void srmmu_flush_tlb_region(unsigned long addr)
-{
-	addr &= SRMMU_PGDIR_MASK;
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(addr | 0x200),	/* Flush TLB region.. */
-			     "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-static __inline__ void srmmu_flush_tlb_segment(unsigned long addr)
-{
-	addr &= SRMMU_REAL_PMD_MASK;
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(addr | 0x100),	/* Flush TLB segment.. */
-			     "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-static __inline__ void srmmu_flush_tlb_page(unsigned long page)
-{
-	page &= PAGE_MASK;
-	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"::"r"(page),	/* Flush TLB page.. */
-			     "i"(ASI_M_FLUSH_PROBE):"memory");
-
-}
-
-static __inline__ unsigned long srmmu_hwprobe(unsigned long vaddr)
-{
-	unsigned long retval;
-
-	vaddr &= PAGE_MASK;
-	__asm__ __volatile__("lda [%1] %2, %0\n\t":
-			     "=r"(retval):
-			     "r"(vaddr | 0x400), "i"(ASI_M_FLUSH_PROBE));
-
-	return retval;
-}
-
-static __inline__ int srmmu_get_pte(unsigned long addr)
-{
-	register unsigned long entry;
-
-	__asm__ __volatile__("\n\tlda [%1] %2,%0\n\t":
-			     "=r"(entry):
-			     "r"((addr & 0xfffff000) | 0x400),
-			     "i"(ASI_M_FLUSH_PROBE));
-	return entry;
-}
-
-extern unsigned long (*srmmu_read_physical) (unsigned long paddr);
-extern void (*srmmu_write_physical) (unsigned long paddr, unsigned long word);
-
-#endif				/* !(__ASSEMBLY__) */
-
-#endif				/* !(__SPARC_SRMMU_H__) */
diff --git a/arch/sparc/include/asm/stack.h b/arch/sparc/include/asm/stack.h
deleted file mode 100644
index fcab92096b07..000000000000
--- a/arch/sparc/include/asm/stack.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/* SPARC stack layout Macros and structures,
- * mainly taken from BCC (the Bare C compiler for
- * SPARC LEON2/3) sources.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_STACK_H__
-#define __SPARC_STACK_H__
-
-#include <asm/ptrace.h>
-
-#ifndef __ASSEMBLER__
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define PT_REGS_SZ   sizeof(struct pt_regs)
-
-/* A Sparc stack frame */
-	struct sparc_stackframe_regs {
-		unsigned long sf_locals[8];
-		unsigned long sf_ins[6];
-		struct sparc_stackframe_regs *sf_fp;
-		unsigned long sf_callers_pc;
-		char *sf_structptr;
-		unsigned long sf_xargs[6];
-		unsigned long sf_xxargs[1];
-	};
-#define SF_REGS_SZ sizeof(struct sparc_stackframe_regs)
-
-/* A register window */
-	struct sparc_regwindow_regs {
-		unsigned long locals[8];
-		unsigned long ins[8];
-	};
-#define RW_REGS_SZ sizeof(struct sparc_regwindow_regs)
-
-/* A fpu window */
-	struct sparc_fpuwindow_regs {
-		unsigned long locals[32];
-		unsigned long fsr;
-		unsigned long lastctx;
-	};
-#define FW_REGS_SZ sizeof(struct sparc_fpuwindow_regs)
-
-#ifdef __cplusplus
-}
-#endif
-#else
-#define PT_REGS_SZ	0x50	/* 20*4 */
-#define SF_REGS_SZ	0x60	/* 24*4 */
-#define RW_REGS_SZ	0x20	/* 16*4 */
-#define FW_REGS_SZ	0x88	/* 34*4 */
-#endif				/* !ASM */
-
-/* These are for pt_regs. */
-#define PT_PSR		0x0
-#define PT_PC		0x4
-#define PT_NPC		0x8
-#define PT_Y		0xc
-#define PT_G0		0x10
-#define PT_WIM		PT_G0
-#define PT_G1		0x14
-#define PT_G2		0x18
-#define PT_G3		0x1c
-#define PT_G4		0x20
-#define PT_G5		0x24
-#define PT_G6		0x28
-#define PT_G7		0x2c
-#define PT_I0		0x30
-#define PT_I1		0x34
-#define PT_I2		0x38
-#define PT_I3		0x3c
-#define PT_I4		0x40
-#define PT_I5		0x44
-#define PT_I6		0x48
-#define PT_FP		PT_I6
-#define PT_I7		0x4c
-
-/* Stack_frame offsets */
-#define SF_L0		0x00
-#define SF_L1		0x04
-#define SF_L2		0x08
-#define SF_L3		0x0c
-#define SF_L4		0x10
-#define SF_L5		0x14
-#define SF_L6		0x18
-#define SF_L7		0x1c
-#define SF_I0		0x20
-#define SF_I1		0x24
-#define SF_I2		0x28
-#define SF_I3		0x2c
-#define SF_I4		0x30
-#define SF_I5		0x34
-#define SF_FP		0x38
-#define SF_PC		0x3c
-#define SF_RETP		0x40
-#define SF_XARG0	0x44
-#define	SF_XARG1	0x48
-#define	SF_XARG2	0x4c
-#define	SF_XARG3	0x50
-#define	SF_XARG4	0x54
-#define	SF_XARG5	0x58
-#define	SF_XXARG	0x5c
-
-/* Reg_window offsets */
-#define RW_L0		0x00
-#define RW_L1		0x04
-#define RW_L2		0x08
-#define RW_L3		0x0c
-#define RW_L4		0x10
-#define RW_L5		0x14
-#define RW_L6		0x18
-#define RW_L7		0x1c
-#define RW_I0		0x20
-#define RW_I1		0x24
-#define RW_I2		0x28
-#define RW_I3		0x2c
-#define RW_I4		0x30
-#define RW_I5		0x34
-#define RW_I6		0x38
-#define RW_I7		0x3c
-
-/* Fpu_window offsets */
-#define FW_F0		0x00
-#define FW_F2		0x08
-#define FW_F4		0x10
-#define FW_F6		0x18
-#define FW_F8		0x20
-#define FW_F10		0x28
-#define FW_F12		0x30
-#define FW_F14		0x38
-#define FW_F16		0x40
-#define FW_F18		0x48
-#define FW_F20		0x50
-#define FW_F22		0x58
-#define FW_F24		0x60
-#define FW_F26		0x68
-#define FW_F28		0x70
-#define FW_F30		0x78
-#define FW_FSR		0x80
-
-#endif
diff --git a/arch/sparc/include/asm/string.h b/arch/sparc/include/asm/string.h
deleted file mode 100644
index d9cc5dba62e0..000000000000
--- a/arch/sparc/include/asm/string.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _SPARC_STRING_H_
-#define _SPARC_STRING_H_
-
-/*
-#define __HAVE_ARCH_STRCPY
-#define __HAVE_ARCH_STRNCPY
-#define __HAVE_ARCH_STRLEN
-#define __HAVE_ARCH_STRCMP
-#define __HAVE_ARCH_STRCAT
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_BCOPY
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMMOVE
-#define __HAVE_ARCH_MEMCMP
-#define __HAVE_ARCH_MEMCHR
-*/
-
-extern int strcasecmp(const char *, const char *);
-extern int strncasecmp(const char *, const char *, __kernel_size_t);
-extern char *strcpy(char *, const char *);
-extern char *strncpy(char *, const char *, __kernel_size_t);
-extern __kernel_size_t strlen(const char *);
-extern int strcmp(const char *, const char *);
-extern char *strcat(char *, const char *);
-extern void *memset(void *, int, __kernel_size_t);
-extern void *memcpy(void *, const void *, __kernel_size_t);
-extern void *memmove(void *, const void *, __kernel_size_t);
-extern int memcmp(const void *, const void *, __kernel_size_t);
-extern void *memchr(const void *, int, __kernel_size_t);
-
-#endif
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
deleted file mode 100644
index 72030b264ef7..000000000000
--- a/arch/sparc/include/asm/types.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _SPARC_TYPES_H
-#define _SPARC_TYPES_H
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned short umode_t;
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
-typedef struct {
-	__u32 u[4];
-} __attribute__((aligned(16))) vector128;
-
-#ifdef __KERNEL__
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32
-
-/* DMA addresses are 32-bits wide */
-typedef u32 dma_addr_t;
-
-typedef unsigned long phys_addr_t;
-typedef unsigned long phys_size_t;
-
-#endif				/* __KERNEL__ */
-#endif				/* __ASSEMBLY__ */
-
-#endif
diff --git a/arch/sparc/include/asm/u-boot.h b/arch/sparc/include/asm/u-boot.h
deleted file mode 100644
index 75ac7dc62a27..000000000000
--- a/arch/sparc/include/asm/u-boot.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __U_BOOT_H__
-#define __U_BOOT_H__
-
-/* Currently, this board information is not passed to
- * Linux kernel from U-Boot, but may be passed to other
- * Operating systems. This is because U-Boot emulates
- * a SUN PROM loader (from Linux point of view).
- */
-#include <asm-generic/u-boot.h>
-
-/* For image.h:image_check_target_arch() */
-#define IH_ARCH_DEFAULT IH_ARCH_SPARC
-
-#endif
diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h
deleted file mode 100644
index 0e646f7fa955..000000000000
--- a/arch/sparc/include/asm/unaligned.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _ASM_SPARC_UNALIGNED_H
-#define _ASM_SPARC_UNALIGNED_H
-
-/*
- * The SPARC can not do unaligned accesses, it must be split into multiple
- * byte accesses. The SPARC is in big endian mode.
- */
-#include <asm-generic/unaligned.h>
-
-#endif	/* _ASM_SPARC_UNALIGNED_H */
diff --git a/arch/sparc/include/asm/winmacro.h b/arch/sparc/include/asm/winmacro.h
deleted file mode 100644
index 916ee9c5a3a9..000000000000
--- a/arch/sparc/include/asm/winmacro.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * Added to U-Boot,
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com
- * Copyright (C) 2007
- *
- * LEON2/3 LIBIO low-level routines
- * Written by Jiri Gaisler.
- * Copyright (C) 2004  Gaisler Research AB
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __SPARC_WINMACRO_H__
-#define __SPARC_WINMACRO_H__
-
-#include <asm/asmmacro.h>
-#include <asm/stack.h>
-
-/* Store the register window onto the 8-byte aligned area starting
- * at %reg.  It might be %sp, it might not, we don't care.
- */
-#define RW_STORE(reg) \
-	std	%l0, [%reg + RW_L0]; \
-	std	%l2, [%reg + RW_L2]; \
-	std	%l4, [%reg + RW_L4]; \
-	std	%l6, [%reg + RW_L6]; \
-	std	%i0, [%reg + RW_I0]; \
-	std	%i2, [%reg + RW_I2]; \
-	std	%i4, [%reg + RW_I4]; \
-	std	%i6, [%reg + RW_I6];
-
-/* Load a register window from the area beginning at %reg. */
-#define RW_LOAD(reg) \
-	ldd	[%reg + RW_L0], %l0; \
-	ldd	[%reg + RW_L2], %l2; \
-	ldd	[%reg + RW_L4], %l4; \
-	ldd	[%reg + RW_L6], %l6; \
-	ldd	[%reg + RW_I0], %i0; \
-	ldd	[%reg + RW_I2], %i2; \
-	ldd	[%reg + RW_I4], %i4; \
-	ldd	[%reg + RW_I6], %i6;
-
-/* Loading and storing struct pt_reg trap frames. */
-#define PT_LOAD_INS(base_reg) \
-	ldd	[%base_reg + SF_REGS_SZ + PT_I0], %i0; \
-	ldd	[%base_reg + SF_REGS_SZ + PT_I2], %i2; \
-	ldd	[%base_reg + SF_REGS_SZ + PT_I4], %i4; \
-	ldd	[%base_reg + SF_REGS_SZ + PT_I6], %i6;
-
-#define PT_LOAD_GLOBALS(base_reg) \
-	ld	[%base_reg + SF_REGS_SZ + PT_G1], %g1; \
-	ldd	[%base_reg + SF_REGS_SZ + PT_G2], %g2; \
-	ldd	[%base_reg + SF_REGS_SZ + PT_G4], %g4; \
-	ldd	[%base_reg + SF_REGS_SZ + PT_G6], %g6;
-
-#define PT_LOAD_YREG(base_reg, scratch) \
-	ld	[%base_reg + SF_REGS_SZ + PT_Y], %scratch; \
-	wr	%scratch, 0x0, %y;
-
-#define PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
-	ld	[%base_reg + SF_REGS_SZ + PT_PSR], %pt_psr; \
-	ld	[%base_reg + SF_REGS_SZ + PT_PC], %pt_pc; \
-	ld	[%base_reg + SF_REGS_SZ + PT_NPC], %pt_npc;
-
-#define PT_LOAD_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
-	PT_LOAD_YREG(base_reg, scratch) \
-	PT_LOAD_INS(base_reg) \
-	PT_LOAD_GLOBALS(base_reg) \
-	PT_LOAD_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
-
-#define PT_STORE_INS(base_reg) \
-	std	%i0, [%base_reg + SF_REGS_SZ + PT_I0]; \
-	std	%i2, [%base_reg + SF_REGS_SZ + PT_I2]; \
-	std	%i4, [%base_reg + SF_REGS_SZ + PT_I4]; \
-	std	%i6, [%base_reg + SF_REGS_SZ + PT_I6];
-
-#define PT_STORE_GLOBALS(base_reg) \
-	st	%g1, [%base_reg + SF_REGS_SZ + PT_G1]; \
-	std	%g2, [%base_reg + SF_REGS_SZ + PT_G2]; \
-	std	%g4, [%base_reg + SF_REGS_SZ + PT_G4]; \
-	std	%g6, [%base_reg + SF_REGS_SZ + PT_G6];
-
-#define PT_STORE_YREG(base_reg, scratch) \
-	rd	%y, %scratch; \
-	st	%scratch, [%base_reg + SF_REGS_SZ + PT_Y];
-
-#define PT_STORE_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
-	st	%pt_psr, [%base_reg + SF_REGS_SZ + PT_PSR]; \
-	st	%pt_pc,  [%base_reg + SF_REGS_SZ + PT_PC]; \
-	st	%pt_npc, [%base_reg + SF_REGS_SZ + PT_NPC];
-
-#define PT_STORE_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
-	PT_STORE_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
-	PT_STORE_GLOBALS(base_reg) \
-	PT_STORE_YREG(base_reg, g_scratch) \
-	PT_STORE_INS(base_reg)
-
-/* Store the fpu register window*/
-#define FW_STORE(reg) \
-	std	%f0, [reg + FW_F0]; \
-	std	%f2, [reg + FW_F2]; \
-	std	%f4, [reg + FW_F4]; \
-	std	%f6, [reg + FW_F6]; \
-	std	%f8, [reg + FW_F8]; \
-	std	%f10, [reg + FW_F10]; \
-	std	%f12, [reg + FW_F12]; \
-	std	%f14, [reg + FW_F14]; \
-	std	%f16, [reg + FW_F16]; \
-	std	%f18, [reg + FW_F18]; \
-	std	%f20, [reg + FW_F20]; \
-	std	%f22, [reg + FW_F22]; \
-	std	%f24, [reg + FW_F24]; \
-	std	%f26, [reg + FW_F26]; \
-	std	%f28, [reg + FW_F28]; \
-	std	%f30, [reg + FW_F30]; \
-	st	%fsr, [reg + FW_FSR];
-
-/* Load a fpu register window from the area beginning at reg. */
-#define FW_LOAD(reg) \
-	ldd	[reg + FW_F0], %f0; \
-	ldd	[reg + FW_F2], %f2; \
-	ldd	[reg + FW_F4], %f4; \
-	ldd	[reg + FW_F6], %f6; \
-	ldd	[reg + FW_F8], %f8; \
-	ldd	[reg + FW_F10], %f10; \
-	ldd	[reg + FW_F12], %f12; \
-	ldd	[reg + FW_F14], %f14; \
-	ldd	[reg + FW_F16], %f16; \
-	ldd	[reg + FW_F18], %f18; \
-	ldd	[reg + FW_F20], %f20; \
-	ldd	[reg + FW_F22], %f22; \
-	ldd	[reg + FW_F24], %f24; \
-	ldd	[reg + FW_F26], %f26; \
-	ldd	[reg + FW_F28], %f28; \
-	ldd	[reg + FW_F30], %f30; \
-	ld	[reg + FW_FSR], %fsr;
-
-#endif
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
deleted file mode 100644
index 6b7ad6d1555a..000000000000
--- a/arch/sparc/lib/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2000-2015
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y = cache.o interrupts.o
-obj-$(CONFIG_CMD_BOOTM) += bootm.o
diff --git a/arch/sparc/lib/bootm.c b/arch/sparc/lib/bootm.c
deleted file mode 100644
index 927a351013a2..000000000000
--- a/arch/sparc/lib/bootm.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/* SPARC code for booting linux 2.6
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/byteorder.h>
-#include <asm/prom.h>
-#include <asm/cache.h>
-#include <image.h>
-
-#define PRINT_KERNEL_HEADER
-
-extern image_header_t header;
-extern void srmmu_init_cpu(unsigned int entry);
-extern void prepare_bootargs(char *bootargs);
-
-/* sparc kernel argument (the ROM vector) */
-struct linux_romvec *kernel_arg_promvec;
-
-/* page szie is 4k */
-#define PAGE_SIZE 0x1000
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-#define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000
-struct __attribute__ ((packed)) {
-	char traptable[PAGE_SIZE];
-	char swapper_pg_dir[PAGE_SIZE];
-	char pg0[PAGE_SIZE];
-	char pg1[PAGE_SIZE];
-	char pg2[PAGE_SIZE];
-	char pg3[PAGE_SIZE];
-	char empty_bad_page[PAGE_SIZE];
-	char empty_bad_page_table[PAGE_SIZE];
-	char empty_zero_page[PAGE_SIZE];
-	unsigned char hdr[4];	/* ascii "HdrS" */
-	/* 00.02.06.0b is for Linux kernel 2.6.11 */
-	unsigned char linuxver_mega_major;
-	unsigned char linuxver_major;
-	unsigned char linuxver_minor;
-	unsigned char linuxver_revision;
-	/* header version 0x0203 */
-	unsigned short hdr_ver;
-	union __attribute__ ((packed)) {
-		struct __attribute__ ((packed)) {
-			unsigned short root_flags;
-			unsigned short root_dev;
-			unsigned short ram_flags;
-			unsigned int sparc_ramdisk_image;
-			unsigned int sparc_ramdisk_size;
-			unsigned int reboot_command;
-			unsigned int resv[3];
-			unsigned int end;
-		} ver_0203;
-	} hdr_input;
-} *linux_hdr;
-
-/* temporary initrd image holder */
-image_header_t ihdr;
-
-void arch_lmb_reserve(struct lmb *lmb)
-{
-	/* Reserve the space used by PROM and stack. This is done
-	 * to avoid that the RAM image is copied over stack or
-	 * PROM.
-	 */
-	lmb_reserve(lmb, CONFIG_SYS_RELOC_MONITOR_BASE, CONFIG_SYS_RAM_END);
-}
-
-/* boot the linux kernel */
-int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t * images)
-{
-	char *bootargs;
-	ulong rd_len;
-	void (*kernel) (struct linux_romvec *, void *);
-	int ret;
-
-	/*
-	 * allow the PREP bootm subcommand, it is required for bootm to work
-	 */
-	if (flag & BOOTM_STATE_OS_PREP)
-		return 0;
-
-	if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
-		return 1;
-
-	/* Get virtual address of kernel start */
-	linux_hdr = (void *)images->os.load;
-
-	/* */
-	kernel = (void (*)(struct linux_romvec *, void *))images->ep;
-
-	/* check for a SPARC kernel */
-	if ((linux_hdr->hdr[0] != 'H') ||
-	    (linux_hdr->hdr[1] != 'd') ||
-	    (linux_hdr->hdr[2] != 'r') || (linux_hdr->hdr[3] != 'S')) {
-		puts("Error reading header of SPARC Linux kernel, aborting\n");
-		goto error;
-	}
-#ifdef PRINT_KERNEL_HEADER
-	printf("## Found SPARC Linux kernel %d.%d.%d ...\n",
-	       linux_hdr->linuxver_major,
-	       linux_hdr->linuxver_minor, linux_hdr->linuxver_revision);
-#endif
-
-	/* set basic boot params in kernel header now that it has been
-	 * extracted and is writeable.
-	 */
-
-	ret = image_setup_linux(images);
-	if (ret) {
-		puts("### Failed to relocate RAM disk\n");
-		goto error;
-	}
-
-	/* Calc length of RAM disk, if zero no ramdisk available */
-	rd_len = images->rd_end - images->rd_start;
-
-	if (rd_len) {
-		/* Update SPARC kernel header so that Linux knows
-		 * what is going on and where to find RAM disk.
-		 *
-		 * Set INITRD Image address relative to RAM Start
-		 */
-		linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image =
-			images->initrd_start - CONFIG_SYS_RAM_BASE;
-		linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len;
-		/* Clear READ ONLY flag if set to non-zero */
-		linux_hdr->hdr_input.ver_0203.root_flags = 1;
-		/* Set root device to: Root_RAM0 */
-		linux_hdr->hdr_input.ver_0203.root_dev = 0x100;
-		linux_hdr->hdr_input.ver_0203.ram_flags = 0;
-	} else {
-		/* NOT using RAMDISK image, overwriting kernel defaults */
-		linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image = 0;
-		linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = 0;
-		/* Leave to kernel defaults
-		   linux_hdr->hdr_input.ver_0203.root_flags = 1;
-		   linux_hdr->hdr_input.ver_0203.root_dev = 0;
-		   linux_hdr->hdr_input.ver_0203.ram_flags = 0;
-		 */
-	}
-
-	/* Copy bootargs from bootargs variable to kernel readable area */
-	bootargs = getenv("bootargs");
-	prepare_bootargs(bootargs);
-
-	/* turn on mmu & setup context table & page table for process 0 (kernel) */
-	srmmu_init_cpu((unsigned int)kernel);
-
-	/* Enter SPARC Linux kernel
-	 * From now on the only code in u-boot that will be
-	 * executed is the PROM code.
-	 */
-	kernel(kernel_arg_promvec, (void *)images->ep);
-
-	/* It will never come to this... */
-	while (1) ;
-
-      error:
-	return 1;
-}
diff --git a/arch/sparc/lib/cache.c b/arch/sparc/lib/cache.c
deleted file mode 100644
index fd17467f7078..000000000000
--- a/arch/sparc/lib/cache.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/* Sparc cache library
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-void flush_cache(ulong start_addr, ulong size)
-{
-	/* Flush All Cache */
-	sparc_dcache_flush_all();
-	sparc_icache_flush_all();
-}
diff --git a/arch/sparc/lib/interrupts.c b/arch/sparc/lib/interrupts.c
deleted file mode 100644
index cb73d17999dc..000000000000
--- a/arch/sparc/lib/interrupts.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov at mrv.com>
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-
-/* Implemented by SPARC CPUs */
-extern int interrupt_init_cpu(void);
-extern void timer_interrupt_cpu(void *arg);
-extern int timer_interrupt_init_cpu(void);
-
-int intLock(void)
-{
-	unsigned int pil;
-
-	pil = get_pil();
-
-	/* set PIL to 15 ==> no pending interrupts will interrupt CPU */
-	set_pil(15);
-
-	return pil;
-}
-
-void intUnlock(int oldLevel)
-{
-	set_pil(oldLevel);
-}
-
-void enable_interrupts(void)
-{
-	set_pil(0);		/* enable all interrupts */
-}
-
-int disable_interrupts(void)
-{
-	return intLock();
-}
-
-int interrupt_is_enabled(void)
-{
-	if (get_pil() == 15)
-		return 0;
-	return 1;
-}
-
-int interrupt_init(void)
-{
-	int ret;
-
-	/* call cpu specific function from $(CPU)/interrupts.c */
-	ret = interrupt_init_cpu();
-
-	/* enable global interrupts */
-	enable_interrupts();
-
-	return ret;
-}
diff --git a/cmd/Kconfig b/cmd/Kconfig
index ef5315631476..586d15962945 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -608,20 +608,6 @@ endmenu
 
 menu "Misc commands"
 
-config CMD_AMBAPP
-	bool "ambapp"
-	depends on LEON3
-	default y
-	help
-	  Lists AMBA Plug-n-Play information.
-
-config SYS_AMBAPP_PRINT_ON_STARTUP
-	bool "Show AMBA PnP info on startup"
-	depends on CMD_AMBAPP
-	default n
-	help
-	  Show AMBA Plug-n-Play information on startup.
-
 config CMD_BKOPS_ENABLE
 	bool "mmc bkops enable"
 	depends on CMD_MMC
diff --git a/cmd/Makefile b/cmd/Makefile
index f13bb8c11ecb..ef1406b3f86a 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -14,7 +14,6 @@ obj-y += version.o
 
 # command
 obj-$(CONFIG_CMD_AES) += aes.o
-obj-$(CONFIG_CMD_AMBAPP) += ambapp.o
 obj-$(CONFIG_CMD_ARMFLASH) += armflash.o
 obj-$(CONFIG_SOURCE) += source.o
 obj-$(CONFIG_CMD_SOURCE) += source.o
diff --git a/cmd/ambapp.c b/cmd/ambapp.c
deleted file mode 100644
index 4b6d1741e9bf..000000000000
--- a/cmd/ambapp.c
+++ /dev/null
@@ -1,575 +0,0 @@
-/*
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/*
- * AMBA Plug&Play information list command
- *
- */
-#include <common.h>
-#include <command.h>
-#include <ambapp.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-typedef struct {
-	int device_id;
-	char *name;
-	char *desc;
-} ambapp_device_name;
-
-typedef struct {
-	unsigned int vendor_id;
-	char *name;
-	char *desc;
-	ambapp_device_name *devices;
-} ambapp_vendor_devnames;
-
-/** Vendor GAISLER devices */
-static ambapp_device_name GAISLER_devices[] = {
-	{GAISLER_LEON2DSU, "LEON2DSU", "Leon2 Debug Support Unit"},
-	{GAISLER_LEON3, "LEON3", "Leon3 SPARC V8 Processor"},
-	{GAISLER_LEON3DSU, "LEON3DSU", "Leon3 Debug Support Unit"},
-	{GAISLER_ETHAHB, "ETHAHB", "OC ethernet AHB interface"},
-	{GAISLER_APBMST, "APBMST", "AHB/APB Bridge"},
-	{GAISLER_AHBUART, "AHBUART", "AHB Debug UART"},
-	{GAISLER_SRCTRL, "SRCTRL", "Simple SRAM Controller"},
-	{GAISLER_SDCTRL, "SDCTRL", "PC133 SDRAM Controller"},
-	{GAISLER_SSRCTRL, "SSRCTRL", "Synchronous SRAM Controller"},
-	{GAISLER_APBUART, "APBUART", "Generic UART"},
-	{GAISLER_IRQMP, "IRQMP", "Multi-processor Interrupt Ctrl."},
-	{GAISLER_AHBRAM, "AHBRAM", "Single-port AHB SRAM module"},
-	{GAISLER_AHBDPRAM, "AHBDPRAM", "Dual-port AHB SRAM module"},
-	{GAISLER_GPTIMER, "GPTIMER", "Modular Timer Unit"},
-	{GAISLER_PCITRG, "PCITRG", "Simple 32-bit PCI Target"},
-	{GAISLER_PCISBRG, "PCISBRG", "Simple 32-bit PCI Bridge"},
-	{GAISLER_PCIFBRG, "PCIFBRG", "Fast 32-bit PCI Bridge"},
-	{GAISLER_PCITRACE, "PCITRACE", "32-bit PCI Trace Buffer"},
-	{GAISLER_DMACTRL, "DMACTRL", "AMBA DMA controller"},
-	{GAISLER_AHBTRACE, "AHBTRACE", "AMBA Trace Buffer"},
-	{GAISLER_DSUCTRL, "DSUCTRL", "DSU/ETH controller"},
-	{GAISLER_CANAHB, "CANAHB", "OC CAN AHB interface"},
-	{GAISLER_GPIO, "GPIO", "General Purpose I/O port"},
-	{GAISLER_AHBROM, "AHBROM", "Generic AHB ROM"},
-	{GAISLER_AHBJTAG, "AHBJTAG", "JTAG Debug Link"},
-	{GAISLER_ETHMAC, "ETHMAC", "GR Ethernet MAC"},
-	{GAISLER_SWNODE, "SWNODE", "SpaceWire Node Interface"},
-	{GAISLER_SPW, "SPW", "SpaceWire Serial Link"},
-	{GAISLER_AHB2AHB, "AHB2AHB", "AHB-to-AHB Bridge"},
-	{GAISLER_USBDC, "USBDC", "GR USB 2.0 Device Controller"},
-	{GAISLER_USB_DCL, "USB_DCL", "USB Debug Communication Link"},
-	{GAISLER_DDRMP, "DDRMP", "Multi-port DDR controller"},
-	{GAISLER_ATACTRL, "ATACTRL", "ATA controller"},
-	{GAISLER_DDRSP, "DDRSP", "Single-port DDR266 controller"},
-	{GAISLER_EHCI, "EHCI", "USB Enhanced Host Controller"},
-	{GAISLER_UHCI, "UHCI", "USB Universal Host Controller"},
-	{GAISLER_I2CMST, "I2CMST", "AMBA Wrapper for OC I2C-master"},
-	{GAISLER_SPW2, "SPW2", "GRSPW2 SpaceWire Serial Link"},
-	{GAISLER_AHBDMA, "AHBDMA", ""},
-	{GAISLER_NUHOSP3, "NUHOSP3", "Nuhorizons Spartan3 IO I/F"},
-	{GAISLER_CLKGATE, "CLKGATE", "Clock gating unit"},
-	{GAISLER_SPICTRL, "SPICTRL", "SPI Controller"},
-	{GAISLER_DDR2SP, "DDR2SP", "Single-port DDR2 controller"},
-	{GAISLER_SLINK, "SLINK", "SLINK Master"},
-	{GAISLER_GRTM, "GRTM", "CCSDS Telemetry Encoder"},
-	{GAISLER_GRTC, "GRTC", "CCSDS Telecommand Decoder"},
-	{GAISLER_GRPW, "GRPW", "PacketWire to AMBA AHB I/F"},
-	{GAISLER_GRCTM, "GRCTM", "CCSDS Time Manager"},
-	{GAISLER_GRHCAN, "GRHCAN", "ESA HurriCANe CAN with DMA"},
-	{GAISLER_GRFIFO, "GRFIFO", "FIFO Controller"},
-	{GAISLER_GRADCDAC, "GRADCDAC", "ADC / DAC Interface"},
-	{GAISLER_GRPULSE, "GRPULSE", "General Purpose I/O with Pulses"},
-	{GAISLER_GRTIMER, "GRTIMER", "Timer Unit with Latches"},
-	{GAISLER_AHB2PP, "AHB2PP", "AMBA AHB to Packet Parallel I/F"},
-	{GAISLER_GRVERSION, "GRVERSION", "Version and Revision Register"},
-	{GAISLER_APB2PW, "APB2PW", "PacketWire Transmit Interface"},
-	{GAISLER_PW2APB, "PW2APB", "PacketWire Receive Interface"},
-	{GAISLER_GRCAN, "GRCAN", "CAN Controller with DMA"},
-	{GAISLER_I2CSLV, "I2CSLV", "I2C Slave"},
-	{GAISLER_U16550, "U16550", "Simple 16550 UART"},
-	{GAISLER_AHBMST_EM, "AHBMST_EM", "AMBA Master Emulator"},
-	{GAISLER_AHBSLV_EM, "AHBSLV_EM", "AMBA Slave Emulator"},
-	{GAISLER_GRTESTMOD, "GRTESTMOD", "Test report module"},
-	{GAISLER_ASCS, "ASCS", "ASCS Master"},
-	{GAISLER_IPMVBCTRL, "IPMVBCTRL", "IPM-bus/MVBC memory controller"},
-	{GAISLER_SPIMCTRL, "SPIMCTRL", "SPI Memory Controller"},
-	{GAISLER_L4STAT, "L4STAT", "Leon4 Statistics Module"},
-	{GAISLER_LEON4, "LEON4", "Leon4 SPARC V8 Processor"},
-	{GAISLER_LEON4DSU, "LEON4DSU", "Leon4 Debug Support Unit"},
-	{GAISLER_PWM, "PWM", "PWM generator"},
-	{GAISLER_L2CACHE, "L2CACHE", "L2-Cache Controller"},
-	{GAISLER_SDCTRL64, "SDCTRL64", "64-bit PC133 SDRAM Controller"},
-	{GAISLER_GR1553B, "GR1553B", "MIL-STD-1553B Interface"},
-	{GAISLER_1553TST, "1553TST", "MIL-STD-1553B Test Device"},
-	{GAISLER_GRIOMMU, "GRIOMMU", "I/O Memory Management Unit"},
-	{GAISLER_FTAHBRAM, "FTAHBRAM", "Generic FT AHB SRAM module"},
-	{GAISLER_FTSRCTRL, "FTSRCTRL", "Simple FT SRAM Controller"},
-	{GAISLER_AHBSTAT, "AHBSTAT", "AHB Status Register"},
-	{GAISLER_LEON3FT, "LEON3FT", "Leon3-FT SPARC V8 Processor"},
-	{GAISLER_FTMCTRL, "FTMCTRL", "Memory controller with EDAC"},
-	{GAISLER_FTSDCTRL, "FTSDCTRL", "FT PC133 SDRAM Controller"},
-	{GAISLER_FTSRCTRL8, "FTSRCTRL8", "FT 8-bit SRAM/16-bit IO Ctrl"},
-	{GAISLER_MEMSCRUB, "MEMSCRUB", "AHB Memory Scrubber"},
-	{GAISLER_FTSDCTRL64, "FTSDCTRL64", "64-bit FT SDRAM Controller"},
-	{GAISLER_APBPS2, "APBPS2", "PS2 interface"},
-	{GAISLER_VGACTRL, "VGACTRL", "VGA controller"},
-	{GAISLER_LOGAN, "LOGAN", "On chip Logic Analyzer"},
-	{GAISLER_SVGACTRL, "SVGACTRL", "SVGA frame buffer"},
-	{GAISLER_T1AHB, "T1AHB", "Niagara T1 PCX/AHB bridge"},
-	{GAISLER_MP7WRAP, "MP7WRAP", "CoreMP7 wrapper"},
-	{GAISLER_GRSYSMON, "GRSYSMON", "AMBA wrapper for System Monitor"},
-	{GAISLER_GRACECTRL, "GRACECTRL", "System ACE I/F Controller"},
-	{GAISLER_ATAHBSLV, "ATAHBSLV", "AMBA Test Framework AHB Slave"},
-	{GAISLER_ATAHBMST, "ATAHBMST", "AMBA Test Framework AHB Master"},
-	{GAISLER_ATAPBSLV, "ATAPBSLV", "AMBA Test Framework APB Slave"},
-	{GAISLER_B1553BC, "B1553BC", "AMBA Wrapper for Core1553BBC"},
-	{GAISLER_B1553RT, "B1553RT", "AMBA Wrapper for Core1553BRT"},
-	{GAISLER_B1553BRM, "B1553BRM", "AMBA Wrapper for Core1553BRM"},
-	{GAISLER_AES, "AES", "Advanced Encryption Standard"},
-	{GAISLER_ECC, "ECC", "Elliptic Curve Cryptography"},
-	{GAISLER_PCIF, "PCIF", "AMBA Wrapper for CorePCIF"},
-	{GAISLER_CLKMOD, "CLKMOD", "CPU Clock Switching Ctrl module"},
-	{GAISLER_HAPSTRAK, "HAPSTRAK", "HAPS HapsTrak I/O Port"},
-	{GAISLER_TEST_1X2, "TEST_1X2", "HAPS TEST_1x2 interface"},
-	{GAISLER_WILD2AHB, "WILD2AHB", "WildCard CardBus interface"},
-	{GAISLER_BIO1, "BIO1", "Basic I/O board BIO1"},
-	{GAISLER_AESDMA, "AESDMA", "AES 256 DMA"},
-	{GAISLER_SATCAN, "SATCAN", "SatCAN controller"},
-	{GAISLER_CANMUX, "CANMUX", "CAN Bus multiplexer"},
-	{GAISLER_GRTMRX, "GRTMRX", "CCSDS Telemetry Receiver"},
-	{GAISLER_GRTCTX, "GRTCTX", "CCSDS Telecommand Transmitter"},
-	{GAISLER_GRTMDESC, "GRTMDESC", "CCSDS Telemetry Descriptor"},
-	{GAISLER_GRTMVC, "GRTMVC", "CCSDS Telemetry VC Generator"},
-	{GAISLER_GEFFE, "GEFFE", "Geffe Generator"},
-	{GAISLER_GPREG, "GPREG", "General Purpose Register"},
-	{GAISLER_GRTMPAHB, "GRTMPAHB", "CCSDS Telemetry VC AHB Input"},
-	{GAISLER_SPWCUC, "SPWCUC", "CCSDS CUC / SpaceWire I/F"},
-	{GAISLER_SPW2_DMA, "SPW2_DMA", "GRSPW Router DMA interface"},
-	{GAISLER_SPWROUTER, "SPWROUTER", "GRSPW Router"},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor PENDER devices */
-static ambapp_device_name PENDER_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor ESA devices */
-static ambapp_device_name ESA_devices[] = {
-	{ESA_LEON2, "LEON2", "Leon2 SPARC V8 Processor"},
-	{ESA_LEON2APB, "LEON2APB", "Leon2 Peripheral Bus"},
-	{ESA_IRQ, "IRQ", "Leon2 Interrupt Controller"},
-	{ESA_TIMER, "TIMER", "Leon2 Timer"},
-	{ESA_UART, "UART", "Leon2 UART"},
-	{ESA_CFG, "CFG", "Leon2 Configuration Register"},
-	{ESA_IO, "IO", "Leon2 Input/Output"},
-	{ESA_MCTRL, "MCTRL", "Leon2 Memory Controller"},
-	{ESA_PCIARB, "PCIARB", "PCI Arbiter"},
-	{ESA_HURRICANE, "HURRICANE", "HurriCANe/HurryAMBA CAN Ctrl"},
-	{ESA_SPW_RMAP, "SPW_RMAP", "UoD/Saab SpaceWire/RMAP link"},
-	{ESA_AHBUART, "AHBUART", "Leon2 AHB Debug UART"},
-	{ESA_SPWA, "SPWA", "ESA/ASTRIUM SpaceWire link"},
-	{ESA_BOSCHCAN, "BOSCHCAN", "SSC/BOSCH CAN Ctrl"},
-	{ESA_IRQ2, "IRQ2", "Leon2 Secondary Irq Controller"},
-	{ESA_AHBSTAT, "AHBSTAT", "Leon2 AHB Status Register"},
-	{ESA_WPROT, "WPROT", "Leon2 Write Protection"},
-	{ESA_WPROT2, "WPROT2", "Leon2 Extended Write Protection"},
-	{ESA_PDEC3AMBA, "PDEC3AMBA", "ESA CCSDS PDEC3AMBA TC Decoder"},
-	{ESA_PTME3AMBA, "PTME3AMBA", "ESA CCSDS PTME3AMBA TM Encoder"},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor ASTRIUM devices */
-static ambapp_device_name ASTRIUM_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor OPENCHIP devices */
-static ambapp_device_name OPENCHIP_devices[] = {
-	{OPENCHIP_APBGPIO, "APBGPIO", "APB General Purpose IO"},
-	{OPENCHIP_APBI2C, "APBI2C", "APB I2C Interface"},
-	{OPENCHIP_APBSPI, "APBSPI", "APB SPI Interface"},
-	{OPENCHIP_APBCHARLCD, "APBCHARLCD", "APB Character LCD"},
-	{OPENCHIP_APBPWM, "APBPWM", "APB PWM"},
-	{OPENCHIP_APBPS2, "APBPS2", "APB PS/2 Interface"},
-	{OPENCHIP_APBMMCSD, "APBMMCSD", "APB MMC/SD Card Interface"},
-	{OPENCHIP_APBNAND, "APBNAND", "APB NAND(SmartMedia) Interface"},
-	{OPENCHIP_APBLPC, "APBLPC", "APB LPC Interface"},
-	{OPENCHIP_APBCF, "APBCF", "APB CompactFlash (IDE)"},
-	{OPENCHIP_APBSYSACE, "APBSYSACE", "APB SystemACE Interface"},
-	{OPENCHIP_APB1WIRE, "APB1WIRE", "APB 1-Wire Interface"},
-	{OPENCHIP_APBJTAG, "APBJTAG", "APB JTAG TAP Master"},
-	{OPENCHIP_APBSUI, "APBSUI", "APB Simple User Interface"},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor OPENCORES devices */
-static ambapp_device_name OPENCORES_devices[] = {
-	{OPENCORES_PCIBR, "PCIBR", "PCI Bridge"},
-	{OPENCORES_ETHMAC, "ETHMAC", "Ethernet MAC"},
-	{0, NULL}
-};
-
-
-/** Vendor CONTRIB devices */
-static ambapp_device_name CONTRIB_devices[] = {
-	{CONTRIB_CORE1, "CORE1", "Contributed core 1"},
-	{CONTRIB_CORE2, "CORE2", "Contributed core 2"},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor EONIC devices */
-static ambapp_device_name EONIC_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor RADIONOR devices */
-static ambapp_device_name RADIONOR_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor GLEICHMANN devices */
-static ambapp_device_name GLEICHMANN_devices[] = {
-	{GLEICHMANN_CUSTOM, "CUSTOM", "Custom device"},
-	{GLEICHMANN_GEOLCD01, "GEOLCD01", "GEOLCD01 graphics system"},
-	{GLEICHMANN_DAC, "DAC", "Sigma delta DAC"},
-	{GLEICHMANN_HPI, "HPI", "AHB-to-HPI bridge"},
-	{GLEICHMANN_SPI, "SPI", "SPI master"},
-	{GLEICHMANN_HIFC, "HIFC", "Human interface controller"},
-	{GLEICHMANN_ADCDAC, "ADCDAC", "Sigma delta ADC/DAC"},
-	{GLEICHMANN_SPIOC, "SPIOC", ""},
-	{GLEICHMANN_AC97, "AC97", ""},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor MENTA devices */
-static ambapp_device_name MENTA_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor SUN devices */
-static ambapp_device_name SUN_devices[] = {
-	{SUN_T1, "T1", "Niagara T1 SPARC V9 Processor"},
-	{SUN_S1, "S1", "Niagara S1 SPARC V9 Processor"},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor MOVIDIA devices */
-static ambapp_device_name MOVIDIA_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor ORBITA devices */
-static ambapp_device_name ORBITA_devices[] = {
-	{ORBITA_1553B, "1553B", "MIL-STD-1553B Controller"},
-	{ORBITA_429, "429", "429 Interface"},
-	{ORBITA_SPI, "SPI", "SPI Interface"},
-	{ORBITA_I2C, "I2C", "I2C Interface"},
-	{ORBITA_SMARTCARD, "SMARTCARD", "Smart Card Reader"},
-	{ORBITA_SDCARD, "SDCARD", "SD Card Reader"},
-	{ORBITA_UART16550, "UART16550", "16550 UART"},
-	{ORBITA_CRYPTO, "CRYPTO", "Crypto Engine"},
-	{ORBITA_SYSIF, "SYSIF", "System Interface"},
-	{ORBITA_PIO, "PIO", "Programmable IO module"},
-	{ORBITA_RTC, "RTC", "Real-Time Clock"},
-	{ORBITA_COLORLCD, "COLORLCD", "Color LCD Controller"},
-	{ORBITA_PCI, "PCI", "PCI Module"},
-	{ORBITA_DSP, "DSP", "DPS Co-Processor"},
-	{ORBITA_USBHOST, "USBHOST", "USB Host"},
-	{ORBITA_USBDEV, "USBDEV", "USB Device"},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor SYNOPSYS devices */
-static ambapp_device_name SYNOPSYS_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor NASA devices */
-static ambapp_device_name NASA_devices[] = {
-	{NASA_EP32, "EP32", "EP32 Forth processor"},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor CAL devices */
-static ambapp_device_name CAL_devices[] = {
-	{CAL_DDRCTRL, "DDRCTRL", ""},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor EMBEDDIT devices */
-static ambapp_device_name EMBEDDIT_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor CETON devices */
-static ambapp_device_name CETON_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor S3 devices */
-static ambapp_device_name S3_devices[] = {
-	{0, NULL, NULL}
-};
-
-
-/** Vendor ACTEL devices */
-static ambapp_device_name ACTEL_devices[] = {
-	{ACTEL_COREMP7, "COREMP7", "CoreMP7 Processor"},
-	{0, NULL, NULL}
-};
-
-
-/** Vendor APPLECORE devices */
-static ambapp_device_name APPLECORE_devices[] = {
-	{APPLECORE_UTLEON3, "UTLEON3", "AppleCore uT-LEON3 Processor"},
-	{APPLECORE_UTLEON3DSU, "UTLEON3DSU", "AppleCore uT-LEON3 DSU"},
-	{0, NULL, NULL}
-};
-
-
-/** Vendors and their devices */
-static ambapp_vendor_devnames vendors[] = {
-	{VENDOR_GAISLER, "GAISLER", "Gaisler Research", GAISLER_devices},
-	{VENDOR_PENDER, "PENDER", "", PENDER_devices},
-	{VENDOR_ESA, "ESA", "European Space Agency", ESA_devices},
-	{VENDOR_ASTRIUM, "ASTRIUM", "", ASTRIUM_devices},
-	{VENDOR_OPENCHIP, "OPENCHIP", "OpenChip", OPENCHIP_devices},
-	{VENDOR_OPENCORES, "OPENCORES", "OpenCores", OPENCORES_devices},
-	{VENDOR_CONTRIB, "CONTRIB", "Various contributions", CONTRIB_devices},
-	{VENDOR_EONIC, "EONIC", "Eonic BV", EONIC_devices},
-	{VENDOR_RADIONOR, "RADIONOR", "Radionor Communications", RADIONOR_devices},
-	{VENDOR_GLEICHMANN, "GLEICHMANN", "Gleichmann Electronics", GLEICHMANN_devices},
-	{VENDOR_MENTA, "MENTA", "Menta", MENTA_devices},
-	{VENDOR_SUN, "SUN", "Sun Microsystems", SUN_devices},
-	{VENDOR_MOVIDIA, "MOVIDIA", "", MOVIDIA_devices},
-	{VENDOR_ORBITA, "ORBITA", "Orbita", ORBITA_devices},
-	{VENDOR_SYNOPSYS, "SYNOPSYS", "Synopsys Inc.", SYNOPSYS_devices},
-	{VENDOR_NASA, "NASA", "NASA", NASA_devices},
-	{VENDOR_S3, "S3", "S3 Group", S3_devices},
-	{VENDOR_CAL, "CAL", "", CAL_devices},
-	{VENDOR_EMBEDDIT, "EMBEDDIT", "Embedd.it", EMBEDDIT_devices},
-	{VENDOR_CETON, "CETON", "Ceton Corporation", CETON_devices},
-	{VENDOR_ACTEL, "ACTEL", "Actel Corporation", ACTEL_devices},
-	{VENDOR_APPLECORE, "APPLECORE", "AppleCore", APPLECORE_devices},
-	{0, NULL, NULL, NULL}
-};
-
-static ambapp_device_name *ambapp_get_dev(ambapp_device_name *devs, int id)
-{
-	if (!devs)
-		return NULL;
-
-	while (devs->device_id > 0) {
-		if (devs->device_id == id)
-			return devs;
-		devs++;
-	}
-	return NULL;
-}
-
-char *ambapp_device_id2str(int vendor, int id)
-{
-	ambapp_vendor_devnames *ven = &vendors[0];
-	ambapp_device_name *dev;
-
-	while (ven->vendor_id > 0) {
-		if (ven->vendor_id == vendor) {
-			dev = ambapp_get_dev(ven->devices, id);
-			if (!dev)
-				return NULL;
-			return dev->name;
-		}
-		ven++;
-	}
-	return NULL;
-}
-
-char *ambapp_device_id2desc(int vendor, int id)
-{
-	ambapp_vendor_devnames *ven = &vendors[0];
-	ambapp_device_name *dev;
-
-	while (ven->vendor_id > 0) {
-		if (ven->vendor_id == vendor) {
-			dev = ambapp_get_dev(ven->devices, id);
-			if (!dev)
-				return NULL;
-			return dev->desc;
-		}
-		ven++;
-	}
-	return NULL;
-}
-
-char *ambapp_vendor_id2str(int vendor)
-{
-	ambapp_vendor_devnames *ven = &vendors[0];
-
-	while (ven->vendor_id > 0) {
-		if (ven->vendor_id == vendor) {
-			return ven->name;
-		}
-		ven++;
-	}
-	return NULL;
-}
-
-static char *unknown = "unknown";
-
-char *ambapp_type_names[4] = {
-	/* 0 */ "UNUSED",
-	/* 1 */ "apb",
-	/* 2 */ "ahbmem",
-	/* 3 */ "ahbio"
-};
-
-/* Print one APB device */
-void ambapp_print_apb(ambapp_apbdev *dev, int index)
-{
-	char *dev_str, *ven_str;
-	unsigned int freq;
-
-	ven_str = ambapp_vendor_id2str(dev->vendor);
-	if (!ven_str) {
-		ven_str = unknown;
-		dev_str = unknown;
-	} else {
-		dev_str = ambapp_device_id2str(dev->vendor, dev->device);
-		if (!dev_str)
-			dev_str = unknown;
-	}
-
-	/* Get Frequency of Core */
-	freq = ambapp_bus_freq(&ambapp_plb, dev->ahb_bus_index);
-
-	printf("0x%02x:0x%02x:0x%02x: %s  %s  (%dkHz)\n"
-	       "   apb: 0x%08x - 0x%08x\n"
-	       "   irq: %-2d (ver: %-2d)\n",
-	       index, dev->vendor, dev->device, ven_str, dev_str, freq / 1000,
-	       dev->address, dev->address + (dev->mask-1),
-	       dev->irq, dev->ver);
-}
-
-void ambapp_print_ahb(ambapp_ahbdev *dev, int index)
-{
-	char *dev_str, *ven_str, *type_str;
-	int i;
-	unsigned int freq;
-
-	ven_str = ambapp_vendor_id2str(dev->vendor);
-	if (!ven_str) {
-		ven_str = unknown;
-		dev_str = unknown;
-	} else {
-		dev_str = ambapp_device_id2str(dev->vendor, dev->device);
-		if (!dev_str)
-			dev_str = unknown;
-	}
-
-	/* Get Frequency of Core */
-	freq = ambapp_bus_freq(&ambapp_plb, dev->ahb_bus_index);
-
-	printf("0x%02x:0x%02x:0x%02x: %s  %s  (%dkHz)\n",
-	       index, dev->vendor, dev->device, ven_str, dev_str, freq / 1000);
-
-	for (i = 0; i < 4; i++) {
-		if (dev->type[i] == 0)
-			continue;
-		type_str = ambapp_type_names[dev->type[i]];
-		printf("   %-7s: 0x%08x - 0x%08x\n", type_str, dev->address[i],
-			dev->address[i] + (dev->mask[i]-1));
-	}
-
-	printf("   irq: %-2d (ver: %d)\n", dev->irq, dev->ver);
-}
-
-int do_ambapp_print(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	int index;
-	ambapp_apbdev apbdev;
-	ambapp_ahbdev ahbdev;
-
-	/* Print AHB Masters */
-	puts("\n--------- AHB Masters ---------\n");
-	index = 0;
-	while (ambapp_ahbmst_find(&ambapp_plb, 0, 0, index, &ahbdev) == 1) {
-		/* Found a AHB Master Device */
-		ambapp_print_ahb(&ahbdev, index);
-		index++;
-	}
-
-	/* Print AHB Slaves */
-	puts("\n--------- AHB Slaves  ---------\n");
-	index = 0;
-	while (ambapp_ahbslv_find(&ambapp_plb, 0, 0, index, &ahbdev) == 1) {
-		/* Found a AHB Slave Device */
-		ambapp_print_ahb(&ahbdev, index);
-		index++;
-	}
-
-	/* Print APB Slaves */
-	puts("\n--------- APB Slaves  ---------\n");
-	index = 0;
-	while (ambapp_apb_find(&ambapp_plb, 0, 0, index, &apbdev) == 1) {
-		/* Found a APB Slave Device */
-		ambapp_print_apb(&apbdev, index);
-		index++;
-	}
-
-	puts("\n");
-	return 0;
-}
-
-int ambapp_init_reloc(void)
-{
-	ambapp_vendor_devnames *vend = vendors;
-	ambapp_device_name *dev;
-
-	while (vend->vendor_id && vend->name) {
-		vend->name = (char *)((unsigned int)vend->name + gd->reloc_off);
-		vend->desc = (char *)((unsigned int)vend->desc + gd->reloc_off);
-		vend->devices = (ambapp_device_name *)
-			((unsigned int)vend->devices + gd->reloc_off);
-		dev = vend->devices;
-		vend++;
-		if (!dev)
-			continue;
-		while (dev->device_id && dev->name) {
-			dev->name =
-			    (char *)((unsigned int)dev->name + gd->reloc_off);
-			dev->desc =
-			    (char *)((unsigned int)dev->desc + gd->reloc_off);
-			dev++;
-		}
-	}
-	return 0;
-}
-
-U_BOOT_CMD(
-	ambapp, 1, 1, do_ambapp_print,
-	"list AMBA Plug&Play information",
-	"ambapp\n"
-	"    - lists AMBA (AHB & APB) Plug&Play devices present on the system"
-);
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 20a92320bde1..4a2e5e802213 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -152,8 +152,6 @@ static inline void print_baudrate(void)
 {
 #if defined(CONFIG_PPC)
 	printf("baudrate    = %6u bps\n", gd->baudrate);
-#elif defined(CONFIG_SPARC)
-	printf("baudrate               = %6u bps\n", gd->baudrate);
 #else
 	printf("baudrate    = %u bps\n", gd->baudrate);
 #endif
@@ -277,36 +275,6 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	return 0;
 }
 
-#elif defined(CONFIG_SPARC)
-
-int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
-	bd_t *bd = gd->bd;
-
-#ifdef DEBUG
-	print_num("bd address             ", (ulong) bd);
-#endif
-	print_num("memstart               ", bd->bi_memstart);
-	print_lnum("memsize                ", bd->bi_memsize);
-	print_num("flashstart             ", bd->bi_flashstart);
-	print_num("CONFIG_SYS_MONITOR_BASE       ", CONFIG_SYS_MONITOR_BASE);
-	print_num("CONFIG_ENV_ADDR           ", CONFIG_ENV_ADDR);
-	printf("CONFIG_SYS_RELOC_MONITOR_BASE = 0x%x (%d)\n", CONFIG_SYS_RELOC_MONITOR_BASE,
-	       CONFIG_SYS_MONITOR_LEN);
-	printf("CONFIG_SYS_MALLOC_BASE        = 0x%x (%d)\n", CONFIG_SYS_MALLOC_BASE,
-	       CONFIG_SYS_MALLOC_LEN);
-	printf("CONFIG_SYS_INIT_SP_OFFSET     = 0x%x (%d)\n", CONFIG_SYS_INIT_SP_OFFSET,
-	       CONFIG_SYS_STACK_SIZE);
-	printf("CONFIG_SYS_PROM_OFFSET        = 0x%x (%d)\n", CONFIG_SYS_PROM_OFFSET,
-	       CONFIG_SYS_PROM_SIZE);
-	printf("CONFIG_SYS_GBL_DATA_OFFSET    = 0x%x (%d)\n", CONFIG_SYS_GBL_DATA_OFFSET,
-	       GENERATED_GBL_DATA_SIZE);
-
-	print_eth_ip_addr();
-	print_baudrate();
-	return 0;
-}
-
 #elif defined(CONFIG_M68K)
 
 int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
diff --git a/common/Kconfig b/common/Kconfig
index 0beeb0eff0bb..1e0c6273419f 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -387,7 +387,7 @@ config DISPLAY_CPUINFO
 
 config DISPLAY_BOARDINFO
 	bool "Display information about the board during start up"
-	default y if ARM || M68K || MIPS || PPC || SPARC || XTENSA
+	default y if ARM || M68K || MIPS || PPC || XTENSA
 	help
 	  Display information about the board that U-Boot is running on
 	  when U-Boot starts up. The board function checkboard() is called
diff --git a/common/board_f.c b/common/board_f.c
index 1be0211d873f..063b86112aca 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -380,20 +380,6 @@ static int setup_dest_addr(void)
 	return 0;
 }
 
-#if defined(CONFIG_SPARC)
-static int reserve_prom(void)
-{
-	/* defined in arch/sparc/cpu/leon?/prom.c */
-	extern void *__prom_start_reloc;
-	int size = 8192; /* page table = 2k, prom = 6k */
-	gd->relocaddr -= size;
-	__prom_start_reloc = map_sysmem(gd->relocaddr + 2048, size - 2048);
-	debug("Reserving %dk for PROM and page table at %08lx\n", size,
-		gd->relocaddr);
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
 static int reserve_logbuffer(void)
 {
@@ -880,8 +866,7 @@ static const init_fnc_t init_sequence_f[] = {
 	init_timebase,
 #endif
 #if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || \
-		defined(CONFIG_NDS32) || defined(CONFIG_SH) || \
-		defined(CONFIG_SPARC)
+		defined(CONFIG_NDS32) || defined(CONFIG_SH)
 	timer_init,		/* initialize timer */
 #endif
 #if defined(CONFIG_BOARD_POSTCLK_INIT)
@@ -973,9 +958,6 @@ static const init_fnc_t init_sequence_f[] = {
 	/* Blackfin u-boot monitor should be on top of the ram */
 	reserve_uboot,
 #endif
-#if defined(CONFIG_SPARC)
-	reserve_prom,
-#endif
 #if defined(CONFIG_LOGBUFFER) && !defined(CONFIG_ALT_LB_ADDR)
 	reserve_logbuffer,
 #endif
diff --git a/common/board_r.c b/common/board_r.c
index 5c9e6987b9e1..ce8bf893d287 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -49,9 +49,6 @@
 #include <timer.h>
 #include <trace.h>
 #include <watchdog.h>
-#ifdef CONFIG_CMD_AMBAPP
-#include <ambapp.h>
-#endif
 #ifdef CONFIG_ADDR_MAP
 #include <asm/mmu.h>
 #endif
@@ -69,10 +66,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_SPARC)
-extern int prom_init(void);
-#endif
-
 ulong monitor_flash_len;
 
 __weak int board_flash_wp_on(void)
@@ -597,18 +590,6 @@ static int initr_status_led(void)
 }
 #endif
 
-#if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
-extern int do_ambapp_print(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
-
-static int initr_ambapp_print(void)
-{
-	puts("AMBA:\n");
-	do_ambapp_print(NULL, 0, 0, NULL);
-
-	return 0;
-}
-#endif
-
 #if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
 static int initr_scsi(void)
 {
@@ -822,8 +803,7 @@ static init_fnc_t init_sequence_r[] = {
 	initr_flash,
 #endif
 	INIT_FUNC_WATCHDOG_RESET
-#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_X86) || \
-	defined(CONFIG_SPARC)
+#if defined(CONFIG_PPC) || defined(CONFIG_M68K) || defined(CONFIG_X86)
 	/* initialize higher level parts of CPU like time base and timers */
 	cpu_init_r,
 #endif
@@ -894,12 +874,6 @@ static init_fnc_t init_sequence_r[] = {
 #ifdef CONFIG_BOARD_LATE_INIT
 	board_late_init,
 #endif
-#if defined(CONFIG_CMD_AMBAPP)
-	ambapp_init_reloc,
-#if defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
-	initr_ambapp_print,
-#endif
-#endif
 #if defined(CONFIG_SCSI) && !defined(CONFIG_DM_SCSI)
 	INIT_FUNC_WATCHDOG_RESET
 	initr_scsi,
@@ -939,9 +913,6 @@ static init_fnc_t init_sequence_r[] = {
 #ifdef CONFIG_PS2KBD
 	initr_kbd,
 #endif
-#if defined(CONFIG_SPARC)
-	prom_init,
-#endif
 	run_main_loop,
 };
 
diff --git a/configs/gr_cpci_ax2000_defconfig b/configs/gr_cpci_ax2000_defconfig
deleted file mode 100644
index 6dc0d322dce3..000000000000
--- a/configs/gr_cpci_ax2000_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler LEON3 GR-CPCI-AX2000"
-CONFIG_TARGET_GR_CPCI_AX2000=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/gr_ep2s60_defconfig b/configs/gr_ep2s60_defconfig
deleted file mode 100644
index 6b635e781014..000000000000
--- a/configs/gr_ep2s60_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler LEON3 EP2S60"
-CONFIG_TARGET_GR_EP2S60=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/gr_xc3s_1500_defconfig b/configs/gr_xc3s_1500_defconfig
deleted file mode 100644
index 9f1d6a812390..000000000000
--- a/configs/gr_xc3s_1500_defconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler LEON3 GR-XC3S-1500"
-CONFIG_TARGET_GR_XC3S_1500=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-CONFIG_MTD_NOR_FLASH=y
diff --git a/configs/grsim_defconfig b/configs/grsim_defconfig
deleted file mode 100644
index 6cbbbe41febe..000000000000
--- a/configs/grsim_defconfig
+++ /dev/null
@@ -1,22 +0,0 @@
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler GRSIM"
-CONFIG_TARGET_GRSIM=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_SAVEENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_MEMORY is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP=y
-CONFIG_DEBUG_UART=y
-CONFIG_DEBUG_UART_APBUART=y
-CONFIG_DEBUG_UART_BASE=0x80000100
-CONFIG_DEBUG_UART_CLOCK=40000000
diff --git a/configs/grsim_leon2_defconfig b/configs/grsim_leon2_defconfig
deleted file mode 100644
index 75336a10fc0c..000000000000
--- a/configs/grsim_leon2_defconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-CONFIG_SPARC=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_IDENT_STRING=" Gaisler GRSIM LEON2"
-CONFIG_TARGET_GRSIM_LEON2=y
-CONFIG_BOOTDELAY=5
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_SAVEENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_MEMORY is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
diff --git a/disk/Kconfig b/disk/Kconfig
index 16ff52da3eb4..8351b026262e 100644
--- a/disk/Kconfig
+++ b/disk/Kconfig
@@ -22,7 +22,6 @@ config PARTITIONS
 config MAC_PARTITION
 	bool "Enable Apple's MacOS partition table"
 	depends on PARTITIONS
-	default y if SPARC
 	help
 	  Say Y here if you would like to use device under U-Boot which
 	  were partitioned on a Macintosh.
@@ -36,7 +35,7 @@ config DOS_PARTITION
 	bool "Enable MS Dos partition table"
 	depends on PARTITIONS
 	default y if DISTRO_DEFAULTS
-	default y if x86 || SPARC || CMD_FAT || USB_STORAGE
+	default y if x86 || CMD_FAT || USB_STORAGE
 	help
 	  traditional on the Intel architecture, USB sticks, etc.
 
@@ -49,7 +48,7 @@ config ISO_PARTITION
 	bool "Enable ISO partition table"
 	depends on PARTITIONS
 	default y if DISTRO_DEFAULTS
-	default y if SPARC || MIPS || TEGRA
+	default y if MIPS || TEGRA
 
 config SPL_ISO_PARTITION
 	bool "Enable ISO partition table for SPL"
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 2493a48b88d4..ac7e07bfdf58 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -33,7 +33,6 @@ obj-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
 obj-$(CONFIG_FTGMAC100) += ftgmac100.o
 obj-$(CONFIG_FTMAC110) += ftmac110.o
 obj-$(CONFIG_FTMAC100) += ftmac100.o
-obj-$(CONFIG_GRETH) += greth.o
 obj-$(CONFIG_GMAC_ROCKCHIP) += gmac_rockchip.o
 obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
 obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
deleted file mode 100644
index aa5d7114a5b8..000000000000
--- a/drivers/net/greth.c
+++ /dev/null
@@ -1,677 +0,0 @@
-/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver
- *
- * Driver use polling mode (no Interrupt)
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <command.h>
-#include <errno.h>
-#include <net.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <asm/processor.h>
-#include <ambapp.h>
-#include <asm/leon.h>
-
-#include <grlib/greth.h>
-
-/* Default to 3s timeout on autonegotiation */
-#ifndef GRETH_PHY_TIMEOUT_MS
-#define GRETH_PHY_TIMEOUT_MS 3000
-#endif
-
-/* Default to PHY adrress 0 not not specified */
-#ifdef CONFIG_SYS_GRLIB_GRETH_PHYADDR
-#define GRETH_PHY_ADR_DEFAULT CONFIG_SYS_GRLIB_GRETH_PHYADDR
-#else
-#define GRETH_PHY_ADR_DEFAULT 0
-#endif
-
-/* Let board select which GRETH to use as network interface, set
- * this to zero if only one GRETH is available.
- */
-#ifndef CONFIG_SYS_GRLIB_GRETH_INDEX
-#define CONFIG_SYS_GRLIB_GRETH_INDEX 0
-#endif
-
-/* ByPass Cache when reading regs */
-#define GRETH_REGLOAD(addr)		SPARC_NOCACHE_READ(addr)
-/* Write-through cache ==> no bypassing needed on writes */
-#define GRETH_REGSAVE(addr,data) (*(volatile unsigned int *)(addr) = (data))
-#define GRETH_REGORIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)|data)
-#define GRETH_REGANDIN(addr,data) GRETH_REGSAVE(addr,GRETH_REGLOAD(addr)&data)
-
-#define GRETH_RXBD_CNT 4
-#define GRETH_TXBD_CNT 1
-
-#define GRETH_RXBUF_SIZE 1540
-#define GRETH_BUF_ALIGN 4
-#define GRETH_RXBUF_EFF_SIZE \
-	( (GRETH_RXBUF_SIZE&~(GRETH_BUF_ALIGN-1))+GRETH_BUF_ALIGN )
-
-typedef struct {
-	greth_regs *regs;
-	int irq;
-	struct eth_device *dev;
-
-	/* Hardware info */
-	unsigned char phyaddr;
-	int gbit_mac;
-
-	/* Current operating Mode */
-	int gb;			/* GigaBit */
-	int fd;			/* Full Duplex */
-	int sp;			/* 10/100Mbps speed (1=100,0=10) */
-	int auto_neg;		/* Auto negotiate done */
-
-	unsigned char hwaddr[6];	/* MAC Address */
-
-	/* Descriptors */
-	greth_bd *rxbd_base, *rxbd_max;
-	greth_bd *txbd_base, *txbd_max;
-
-	greth_bd *rxbd_curr;
-
-	/* rx buffers in rx descriptors */
-	void *rxbuf_base;	/* (GRETH_RXBUF_SIZE+ALIGNBYTES) * GRETH_RXBD_CNT */
-
-	/* unused for gbit_mac, temp buffer for sending packets with unligned
-	 * start.
-	 * Pointer to packet allocated with malloc.
-	 */
-	void *txbuf;
-
-	struct {
-		/* rx status */
-		unsigned int rx_packets,
-		    rx_crc_errors, rx_frame_errors, rx_length_errors, rx_errors;
-
-		/* tx stats */
-		unsigned int tx_packets,
-		    tx_latecol_errors,
-		    tx_underrun_errors, tx_limit_errors, tx_errors;
-	} stats;
-} greth_priv;
-
-/* Read MII register 'addr' from core 'regs' */
-static int read_mii(int phyaddr, int regaddr, volatile greth_regs * regs)
-{
-	while (GRETH_REGLOAD(&regs->mdio) & GRETH_MII_BUSY) {
-	}
-
-	GRETH_REGSAVE(&regs->mdio, ((phyaddr & 0x1F) << 11) | ((regaddr & 0x1F) << 6) | 2);
-
-	while (GRETH_REGLOAD(&regs->mdio) & GRETH_MII_BUSY) {
-	}
-
-	if (!(GRETH_REGLOAD(&regs->mdio) & GRETH_MII_NVALID)) {
-		return (GRETH_REGLOAD(&regs->mdio) >> 16) & 0xFFFF;
-	} else {
-		return -1;
-	}
-}
-
-static void write_mii(int phyaddr, int regaddr, int data, volatile greth_regs * regs)
-{
-	while (GRETH_REGLOAD(&regs->mdio) & GRETH_MII_BUSY) {
-	}
-
-	GRETH_REGSAVE(&regs->mdio,
-		      ((data & 0xFFFF) << 16) | ((phyaddr & 0x1F) << 11) |
-		      ((regaddr & 0x1F) << 6) | 1);
-
-	while (GRETH_REGLOAD(&regs->mdio) & GRETH_MII_BUSY) {
-	}
-
-}
-
-/* init/start hardware and allocate descriptor buffers for rx side
- *
- */
-int greth_init(struct eth_device *dev, bd_t * bis)
-{
-	int i;
-
-	greth_priv *greth = dev->priv;
-	greth_regs *regs = greth->regs;
-
-	debug("greth_init\n");
-
-	/* Reset core */
-	GRETH_REGSAVE(&regs->control, (GRETH_RESET | (greth->gb << 8) |
-		(greth->sp << 7) | (greth->fd << 4)));
-
-	/* Wait for Reset to complete */
-	while ( GRETH_REGLOAD(&regs->control) & GRETH_RESET) ;
-
-	GRETH_REGSAVE(&regs->control,
-		((greth->gb << 8) | (greth->sp << 7) | (greth->fd << 4)));
-
-	if (!greth->rxbd_base) {
-
-		/* allocate descriptors */
-		greth->rxbd_base = (greth_bd *)
-		    memalign(0x1000, GRETH_RXBD_CNT * sizeof(greth_bd));
-		greth->txbd_base = (greth_bd *)
-		    memalign(0x1000, GRETH_TXBD_CNT * sizeof(greth_bd));
-
-		/* allocate buffers to all descriptors  */
-		greth->rxbuf_base =
-		    malloc(GRETH_RXBUF_EFF_SIZE * GRETH_RXBD_CNT);
-	}
-
-	/* initate rx decriptors */
-	for (i = 0; i < GRETH_RXBD_CNT; i++) {
-		greth->rxbd_base[i].addr = (unsigned int)
-		    greth->rxbuf_base + (GRETH_RXBUF_EFF_SIZE * i);
-		/* enable desciptor & set wrap bit if last descriptor */
-		if (i >= (GRETH_RXBD_CNT - 1)) {
-			greth->rxbd_base[i].stat = GRETH_BD_EN | GRETH_BD_WR;
-		} else {
-			greth->rxbd_base[i].stat = GRETH_BD_EN;
-		}
-	}
-
-	/* initiate indexes */
-	greth->rxbd_curr = greth->rxbd_base;
-	greth->rxbd_max = greth->rxbd_base + (GRETH_RXBD_CNT - 1);
-	greth->txbd_max = greth->txbd_base + (GRETH_TXBD_CNT - 1);
-	/*
-	 * greth->txbd_base->addr = 0;
-	 * greth->txbd_base->stat = GRETH_BD_WR;
-	 */
-
-	/* initate tx decriptors */
-	for (i = 0; i < GRETH_TXBD_CNT; i++) {
-		greth->txbd_base[i].addr = 0;
-		/* enable desciptor & set wrap bit if last descriptor */
-		if (i >= (GRETH_TXBD_CNT - 1)) {
-			greth->txbd_base[i].stat = GRETH_BD_WR;
-		} else {
-			greth->txbd_base[i].stat = 0;
-		}
-	}
-
-	/**** SET HARDWARE REGS ****/
-
-	/* Set pointer to tx/rx descriptor areas */
-	GRETH_REGSAVE(&regs->rx_desc_p, (unsigned int)&greth->rxbd_base[0]);
-	GRETH_REGSAVE(&regs->tx_desc_p, (unsigned int)&greth->txbd_base[0]);
-
-	/* Enable Transmitter, GRETH will now scan descriptors for packets
-	 * to transmitt */
-	debug("greth_init: enabling receiver\n");
-	GRETH_REGORIN(&regs->control, GRETH_RXEN);
-
-	return 0;
-}
-
-/* Initiate PHY to a relevant speed
- * return:
- *  - 0 = success
- *  - 1 = timeout/fail
- */
-int greth_init_phy(greth_priv * dev, bd_t * bis)
-{
-	greth_regs *regs = dev->regs;
-	int tmp, tmp1, tmp2, i;
-	unsigned int start, timeout;
-	int phyaddr = GRETH_PHY_ADR_DEFAULT;
-
-#ifndef CONFIG_SYS_GRLIB_GRETH_PHYADDR
-	/* If BSP doesn't provide a hardcoded PHY address the driver will
-	 * try to autodetect PHY address by stopping the search on the first
-	 * PHY address which has REG0 implemented.
-	 */
-	for (i=0; i<32; i++) {
-		tmp = read_mii(i, 0, regs);
-		if ( (tmp != 0) && (tmp != 0xffff) ) {
-			phyaddr = i;
-			break;
-		}
-	}
-#endif
-
-	/* Save PHY Address */
-	dev->phyaddr = phyaddr;
-
-	debug("GRETH PHY ADDRESS: %d\n", phyaddr);
-
-	/* X msecs to ticks */
-	timeout = GRETH_PHY_TIMEOUT_MS * 1000;
-
-	/* Get system timer0 current value
-	 * Total timeout is 5s
-	 */
-	start = get_timer(0);
-
-	/* get phy control register default values */
-
-	while ((tmp = read_mii(phyaddr, 0, regs)) & 0x8000) {
-		if (get_timer(start) > timeout) {
-			debug("greth_init_phy: PHY read 1 failed\n");
-			return 1;	/* Fail */
-		}
-	}
-
-	/* reset PHY and wait for completion */
-	write_mii(phyaddr, 0, 0x8000 | tmp, regs);
-
-	while (((tmp = read_mii(phyaddr, 0, regs))) & 0x8000) {
-		if (get_timer(start) > timeout) {
-			debug("greth_init_phy: PHY read 2 failed\n");
-			return 1;	/* Fail */
-		}
-	}
-
-	/* Check if PHY is autoneg capable and then determine operating
-	 * mode, otherwise force it to 10 Mbit halfduplex
-	 */
-	dev->gb = 0;
-	dev->fd = 0;
-	dev->sp = 0;
-	dev->auto_neg = 0;
-	if (!((tmp >> 12) & 1)) {
-		write_mii(phyaddr, 0, 0, regs);
-	} else {
-		/* wait for auto negotiation to complete and then check operating mode */
-		dev->auto_neg = 1;
-		i = 0;
-		while (!(((tmp = read_mii(phyaddr, 1, regs)) >> 5) & 1)) {
-			if (get_timer(start) > timeout) {
-				printf("Auto negotiation timed out. "
-				       "Selecting default config\n");
-				tmp = read_mii(phyaddr, 0, regs);
-				dev->gb = ((tmp >> 6) & 1)
-				    && !((tmp >> 13) & 1);
-				dev->sp = !((tmp >> 6) & 1)
-				    && ((tmp >> 13) & 1);
-				dev->fd = (tmp >> 8) & 1;
-				goto auto_neg_done;
-			}
-		}
-		if ((tmp >> 8) & 1) {
-			tmp1 = read_mii(phyaddr, 9, regs);
-			tmp2 = read_mii(phyaddr, 10, regs);
-			if ((tmp1 & GRETH_MII_EXTADV_1000FD) &&
-			    (tmp2 & GRETH_MII_EXTPRT_1000FD)) {
-				dev->gb = 1;
-				dev->fd = 1;
-			}
-			if ((tmp1 & GRETH_MII_EXTADV_1000HD) &&
-			    (tmp2 & GRETH_MII_EXTPRT_1000HD)) {
-				dev->gb = 1;
-				dev->fd = 0;
-			}
-		}
-		if ((dev->gb == 0) || ((dev->gb == 1) && (dev->gbit_mac == 0))) {
-			tmp1 = read_mii(phyaddr, 4, regs);
-			tmp2 = read_mii(phyaddr, 5, regs);
-			if ((tmp1 & GRETH_MII_100TXFD) &&
-			    (tmp2 & GRETH_MII_100TXFD)) {
-				dev->sp = 1;
-				dev->fd = 1;
-			}
-			if ((tmp1 & GRETH_MII_100TXHD) &&
-			    (tmp2 & GRETH_MII_100TXHD)) {
-				dev->sp = 1;
-				dev->fd = 0;
-			}
-			if ((tmp1 & GRETH_MII_10FD) && (tmp2 & GRETH_MII_10FD)) {
-				dev->fd = 1;
-			}
-			if ((dev->gb == 1) && (dev->gbit_mac == 0)) {
-				dev->gb = 0;
-				dev->fd = 0;
-				write_mii(phyaddr, 0, dev->sp << 13, regs);
-			}
-		}
-
-	}
-      auto_neg_done:
-	debug("%s GRETH Ethermac at [0x%x] irq %d. Running \
-		%d Mbps %s duplex\n", dev->gbit_mac ? "10/100/1000" : "10/100", (unsigned int)(regs), (unsigned int)(dev->irq), dev->gb ? 1000 : (dev->sp ? 100 : 10), dev->fd ? "full" : "half");
-	/* Read out PHY info if extended registers are available */
-	if (tmp & 1) {
-		tmp1 = read_mii(phyaddr, 2, regs);
-		tmp2 = read_mii(phyaddr, 3, regs);
-		tmp1 = (tmp1 << 6) | ((tmp2 >> 10) & 0x3F);
-		tmp = tmp2 & 0xF;
-
-		tmp2 = (tmp2 >> 4) & 0x3F;
-		debug("PHY: Vendor %x   Device %x    Revision %d\n", tmp1,
-		       tmp2, tmp);
-	} else {
-		printf("PHY info not available\n");
-	}
-
-	/* set speed and duplex bits in control register */
-	GRETH_REGORIN(&regs->control,
-		      (dev->gb << 8) | (dev->sp << 7) | (dev->fd << 4));
-
-	return 0;
-}
-
-void greth_halt(struct eth_device *dev)
-{
-	greth_priv *greth;
-	greth_regs *regs;
-	int i;
-
-	debug("greth_halt\n");
-
-	if (!dev || !dev->priv)
-		return;
-
-	greth = dev->priv;
-	regs = greth->regs;
-
-	if (!regs)
-		return;
-
-	/* disable receiver/transmitter by clearing the enable bits */
-	GRETH_REGANDIN(&regs->control, ~(GRETH_RXEN | GRETH_TXEN));
-
-	/* reset rx/tx descriptors */
-	if (greth->rxbd_base) {
-		for (i = 0; i < GRETH_RXBD_CNT; i++) {
-			greth->rxbd_base[i].stat =
-			    (i >= (GRETH_RXBD_CNT - 1)) ? GRETH_BD_WR : 0;
-		}
-	}
-
-	if (greth->txbd_base) {
-		for (i = 0; i < GRETH_TXBD_CNT; i++) {
-			greth->txbd_base[i].stat =
-			    (i >= (GRETH_TXBD_CNT - 1)) ? GRETH_BD_WR : 0;
-		}
-	}
-}
-
-int greth_send(struct eth_device *dev, void *eth_data, int data_length)
-{
-	greth_priv *greth = dev->priv;
-	greth_regs *regs = greth->regs;
-	greth_bd *txbd;
-	void *txbuf;
-	unsigned int status;
-
-	debug("greth_send\n");
-
-	/* send data, wait for data to be sent, then return */
-	if (((unsigned int)eth_data & (GRETH_BUF_ALIGN - 1))
-	    && !greth->gbit_mac) {
-		/* data not aligned as needed by GRETH 10/100, solve this by allocating 4 byte aligned buffer
-		 * and copy data to before giving it to GRETH.
-		 */
-		if (!greth->txbuf) {
-			greth->txbuf = malloc(GRETH_RXBUF_SIZE);
-		}
-
-		txbuf = greth->txbuf;
-
-		/* copy data info buffer */
-		memcpy((char *)txbuf, (char *)eth_data, data_length);
-
-		/* keep buffer to next time */
-	} else {
-		txbuf = (void *)eth_data;
-	}
-	/* get descriptor to use, only 1 supported... hehe easy */
-	txbd = greth->txbd_base;
-
-	/* setup descriptor to wrap around to it self */
-	txbd->addr = (unsigned int)txbuf;
-	txbd->stat = GRETH_BD_EN | GRETH_BD_WR | data_length;
-
-	/* Remind Core which descriptor to use when sending */
-	GRETH_REGSAVE(&regs->tx_desc_p, (unsigned int)txbd);
-
-	/* initate send by enabling transmitter */
-	GRETH_REGORIN(&regs->control, GRETH_TXEN);
-
-	/* Wait for data to be sent */
-	while ((status = GRETH_REGLOAD(&txbd->stat)) & GRETH_BD_EN) {
-		;
-	}
-
-	/* was the packet transmitted succesfully? */
-	if (status & GRETH_TXBD_ERR_AL) {
-		greth->stats.tx_limit_errors++;
-	}
-
-	if (status & GRETH_TXBD_ERR_UE) {
-		greth->stats.tx_underrun_errors++;
-	}
-
-	if (status & GRETH_TXBD_ERR_LC) {
-		greth->stats.tx_latecol_errors++;
-	}
-
-	if (status &
-	    (GRETH_TXBD_ERR_LC | GRETH_TXBD_ERR_UE | GRETH_TXBD_ERR_AL)) {
-		/* any error */
-		greth->stats.tx_errors++;
-		return -1;
-	}
-
-	/* bump tx packet counter */
-	greth->stats.tx_packets++;
-
-	/* return succefully */
-	return 0;
-}
-
-int greth_recv(struct eth_device *dev)
-{
-	greth_priv *greth = dev->priv;
-	greth_regs *regs = greth->regs;
-	greth_bd *rxbd;
-	unsigned int status, len = 0, bad;
-	char *d;
-	int enable = 0;
-	int i;
-
-	/* Receive One packet only, but clear as many error packets as there are
-	 * available.
-	 */
-	{
-		/* current receive descriptor */
-		rxbd = greth->rxbd_curr;
-
-		/* get status of next received packet */
-		status = GRETH_REGLOAD(&rxbd->stat);
-
-		bad = 0;
-
-		/* stop if no more packets received */
-		if (status & GRETH_BD_EN) {
-			goto done;
-		}
-
-		debug("greth_recv: packet 0x%x, 0x%x, len: %d\n",
-		       (unsigned int)rxbd, status, status & GRETH_BD_LEN);
-
-		/* Check status for errors.
-		 */
-		if (status & GRETH_RXBD_ERR_FT) {
-			greth->stats.rx_length_errors++;
-			bad = 1;
-		}
-		if (status & (GRETH_RXBD_ERR_AE | GRETH_RXBD_ERR_OE)) {
-			greth->stats.rx_frame_errors++;
-			bad = 1;
-		}
-		if (status & GRETH_RXBD_ERR_CRC) {
-			greth->stats.rx_crc_errors++;
-			bad = 1;
-		}
-		if (bad) {
-			greth->stats.rx_errors++;
-			printf
-			    ("greth_recv: Bad packet (%d, %d, %d, 0x%08x, %d)\n",
-			     greth->stats.rx_length_errors,
-			     greth->stats.rx_frame_errors,
-			     greth->stats.rx_crc_errors, status,
-			     greth->stats.rx_packets);
-			/* print all rx descriptors */
-			for (i = 0; i < GRETH_RXBD_CNT; i++) {
-				printf("[%d]: Stat=0x%lx, Addr=0x%lx\n", i,
-				       GRETH_REGLOAD(&greth->rxbd_base[i].stat),
-				       GRETH_REGLOAD(&greth->rxbd_base[i].addr));
-			}
-		} else {
-			/* Process the incoming packet. */
-			len = status & GRETH_BD_LEN;
-			d = (char *)rxbd->addr;
-
-			debug
-			    ("greth_recv: new packet, length: %d. data: %x %x %x %x %x %x %x %x\n",
-			     len, d[0], d[1], d[2], d[3], d[4], d[5], d[6],
-			     d[7]);
-
-			/* flush all data cache to make sure we're not reading old packet data */
-			sparc_dcache_flush_all();
-
-			/* pass packet on to network subsystem */
-			net_process_received_packet((void *)d, len);
-
-			/* bump stats counters */
-			greth->stats.rx_packets++;
-
-			/* bad is now 0 ==> will stop loop */
-		}
-
-		/* reenable descriptor to receive more packet with this descriptor, wrap around if needed */
-		rxbd->stat =
-		    GRETH_BD_EN |
-		    (((unsigned int)greth->rxbd_curr >=
-		      (unsigned int)greth->rxbd_max) ? GRETH_BD_WR : 0);
-		enable = 1;
-
-		/* increase index */
-		greth->rxbd_curr =
-		    ((unsigned int)greth->rxbd_curr >=
-		     (unsigned int)greth->rxbd_max) ? greth->
-		    rxbd_base : (greth->rxbd_curr + 1);
-
-	}
-
-	if (enable) {
-		GRETH_REGORIN(&regs->control, GRETH_RXEN);
-	}
-      done:
-	/* return positive length of packet or 0 if non received */
-	return len;
-}
-
-void greth_set_hwaddr(greth_priv * greth, unsigned char *mac)
-{
-	/* save new MAC address */
-	greth->dev->enetaddr[0] = greth->hwaddr[0] = mac[0];
-	greth->dev->enetaddr[1] = greth->hwaddr[1] = mac[1];
-	greth->dev->enetaddr[2] = greth->hwaddr[2] = mac[2];
-	greth->dev->enetaddr[3] = greth->hwaddr[3] = mac[3];
-	greth->dev->enetaddr[4] = greth->hwaddr[4] = mac[4];
-	greth->dev->enetaddr[5] = greth->hwaddr[5] = mac[5];
-	greth->regs->esa_msb = (mac[0] << 8) | mac[1];
-	greth->regs->esa_lsb =
-	    (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5];
-
-	debug("GRETH: New MAC address: %02x:%02x:%02x:%02x:%02x:%02x\n",
-	       mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-}
-
-int greth_initialize(bd_t * bis)
-{
-	greth_priv *greth;
-	ambapp_apbdev apbdev;
-	struct eth_device *dev;
-	int i;
-	char *addr_str, *end;
-	unsigned char addr[6];
-
-	debug("Scanning for GRETH\n");
-
-	/* Find Device & IRQ via AMBA Plug&Play information,
-	 * CONFIG_SYS_GRLIB_GRETH_INDEX select which GRETH if multiple
-	 * GRETHs in system.
-	 */
-	if (ambapp_apb_find(&ambapp_plb, VENDOR_GAISLER, GAISLER_ETHMAC,
-			CONFIG_SYS_GRLIB_GRETH_INDEX, &apbdev) != 1) {
-		return -1;	/* GRETH not found */
-	}
-
-	greth = (greth_priv *) malloc(sizeof(greth_priv));
-	dev = (struct eth_device *)malloc(sizeof(struct eth_device));
-	memset(dev, 0, sizeof(struct eth_device));
-	memset(greth, 0, sizeof(greth_priv));
-
-	greth->regs = (greth_regs *) apbdev.address;
-	greth->irq = apbdev.irq;
-	debug("Found GRETH at %p, irq %d\n", greth->regs, greth->irq);
-	dev->priv = (void *)greth;
-	dev->iobase = (unsigned int)greth->regs;
-	dev->init = greth_init;
-	dev->halt = greth_halt;
-	dev->send = greth_send;
-	dev->recv = greth_recv;
-	greth->dev = dev;
-
-	/* Reset Core */
-	GRETH_REGSAVE(&greth->regs->control, GRETH_RESET);
-
-	/* Wait for core to finish reset cycle */
-	while (GRETH_REGLOAD(&greth->regs->control) & GRETH_RESET) ;
-
-	/* Get the phy address which assumed to have been set
-	   correctly with the reset value in hardware */
-	greth->phyaddr = (GRETH_REGLOAD(&greth->regs->mdio) >> 11) & 0x1F;
-
-	/* Check if mac is gigabit capable */
-	greth->gbit_mac = (GRETH_REGLOAD(&greth->regs->control) >> 27) & 1;
-
-	/* Make descriptor string */
-	if (greth->gbit_mac) {
-		strcpy(dev->name, "GRETH_10/100/GB");
-	} else {
-		strcpy(dev->name, "GRETH_10/100");
-	}
-
-	/* initiate PHY, select speed/duplex depending on connected PHY */
-	if (greth_init_phy(greth, bis)) {
-		/* Failed to init PHY (timedout) */
-		debug("GRETH[%p]: Failed to init PHY\n", greth->regs);
-		return -1;
-	}
-
-	/* Register Device to EtherNet subsystem  */
-	eth_register(dev);
-
-	/* Get MAC address */
-	if ((addr_str = getenv("ethaddr")) != NULL) {
-		for (i = 0; i < 6; i++) {
-			addr[i] =
-			    addr_str ? simple_strtoul(addr_str, &end, 16) : 0;
-			if (addr_str) {
-				addr_str = (*end) ? end + 1 : end;
-			}
-		}
-	} else {
-		/* No ethaddr set */
-		return -EINVAL;
-	}
-
-	/* set and remember MAC address */
-	greth_set_hwaddr(greth, addr);
-
-	debug("GRETH[%p]: Initialized successfully\n", greth->regs);
-	return 0;
-}
diff --git a/drivers/net/greth.h b/drivers/net/greth.h
deleted file mode 100644
index 5299b2861c30..000000000000
--- a/drivers/net/greth.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/* Gaisler.com GRETH 10/100/1000 Ethernet MAC driver
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#define GRETH_FD 0x10
-#define GRETH_RESET 0x40
-#define GRETH_MII_BUSY 0x8
-#define GRETH_MII_NVALID 0x10
-
-/* MII registers */
-#define GRETH_MII_EXTADV_1000FD 0x00000200
-#define GRETH_MII_EXTADV_1000HD 0x00000100
-#define GRETH_MII_EXTPRT_1000FD 0x00000800
-#define GRETH_MII_EXTPRT_1000HD 0x00000400
-
-#define GRETH_MII_100T4 0x00000200
-#define GRETH_MII_100TXFD 0x00000100
-#define GRETH_MII_100TXHD 0x00000080
-#define GRETH_MII_10FD 0x00000040
-#define GRETH_MII_10HD 0x00000020
-
-#define GRETH_BD_EN 0x800
-#define GRETH_BD_WR 0x1000
-#define GRETH_BD_IE 0x2000
-#define GRETH_BD_LEN 0x7FF
-
-#define GRETH_TXEN 0x1
-#define GRETH_INT_TX 0x8
-#define GRETH_TXI 0x4
-#define GRETH_TXBD_STATUS 0x0001C000
-#define GRETH_TXBD_MORE 0x20000
-#define GRETH_TXBD_IPCS 0x40000
-#define GRETH_TXBD_TCPCS 0x80000
-#define GRETH_TXBD_UDPCS 0x100000
-#define GRETH_TXBD_ERR_LC 0x10000
-#define GRETH_TXBD_ERR_UE 0x4000
-#define GRETH_TXBD_ERR_AL 0x8000
-#define GRETH_TXBD_NUM 128
-#define GRETH_TXBD_NUM_MASK (GRETH_TXBD_NUM-1)
-#define GRETH_TX_BUF_SIZE 2048
-
-#define GRETH_INT_RX         0x4
-#define GRETH_RXEN           0x2
-#define GRETH_RXI            0x8
-#define GRETH_RXBD_STATUS    0xFFFFC000
-#define GRETH_RXBD_ERR_AE    0x4000
-#define GRETH_RXBD_ERR_FT    0x8000
-#define GRETH_RXBD_ERR_CRC   0x10000
-#define GRETH_RXBD_ERR_OE    0x20000
-#define GRETH_RXBD_ERR_LE    0x40000
-#define GRETH_RXBD_IP_DEC    0x80000
-#define GRETH_RXBD_IP_CSERR  0x100000
-#define GRETH_RXBD_UDP_DEC   0x200000
-#define GRETH_RXBD_UDP_CSERR 0x400000
-#define GRETH_RXBD_TCP_DEC   0x800000
-#define GRETH_RXBD_TCP_CSERR 0x1000000
-
-#define GRETH_RXBD_NUM 128
-#define GRETH_RXBD_NUM_MASK (GRETH_RXBD_NUM-1)
-#define GRETH_RX_BUF_SIZE 2048
-
-/* Ethernet configuration registers */
-typedef struct _greth_regs {
-	volatile unsigned int control;
-	volatile unsigned int status;
-	volatile unsigned int esa_msb;
-	volatile unsigned int esa_lsb;
-	volatile unsigned int mdio;
-	volatile unsigned int tx_desc_p;
-	volatile unsigned int rx_desc_p;
-} greth_regs;
-
-/* Ethernet buffer descriptor */
-typedef struct _greth_bd {
-	volatile unsigned int stat;
-	unsigned int addr;	/* Buffer address not changed by HW */
-} greth_bd;
diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
index f7c973432ec9..bc9ff89527bc 100644
--- a/examples/standalone/stubs.c
+++ b/examples/standalone/stubs.c
@@ -172,21 +172,6 @@ gd_t *global_data;
 		"	nop\n"				\
 		"	nop\n"				\
 		: : "i"(offsetof(gd_t, jt)), "i"(FO(x)) : "r1", "r2");
-#elif defined(CONFIG_SPARC)
-/*
- * g7 holds the pointer to the global_data. g1 is call clobbered.
- */
-#define EXPORT_FUNC(f, a, x, ...)					\
-	asm volatile(					\
-"	.globl\t" #x "\n"				\
-#x ":\n"						\
-"	set %0, %%g1\n"					\
-"	or %%g1, %%g7, %%g1\n"				\
-"	ld [%%g1], %%g1\n"				\
-"	ld [%%g1 + %1], %%g1\n"				\
-"	jmp %%g1\n"					\
-"	nop\n"						\
-	: : "i"(offsetof(gd_t, jt)), "i"(FO(x)) : "g1");
 #elif defined(CONFIG_NDS32)
 /*
  * r16 holds the pointer to the global_data. gp is call clobbered.
diff --git a/include/ambapp.h b/include/ambapp.h
deleted file mode 100644
index d79fcedb4139..000000000000
--- a/include/ambapp.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/* Interface for accessing Gaisler AMBA Plug&Play Bus.
- * The AHB bus can be interfaced with a simpler bus -
- * the APB bus, also freely available in GRLIB at
- * www.gaisler.com.
- *
- * (C) Copyright 2009, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __AMBAPP_H__
-#define __AMBAPP_H__
-
-#include <ambapp_ids.h>
-
-#ifndef __ASSEMBLER__
-/* Structures used to access Plug&Play information directly */
-struct ambapp_pnp_ahb {
-	const unsigned int	id;		/* VENDOR, DEVICE, VER, IRQ, */
-	const unsigned int	custom[3];
-	const unsigned int	mbar[4];	/* MASK, ADDRESS, TYPE,
-						 * CACHABLE/PREFETCHABLE */
-};
-
-struct ambapp_pnp_apb {
-	const unsigned int	id;		/* VENDOR, DEVICE, VER, IRQ, */
-	const unsigned int	iobar;		/* MASK, ADDRESS, TYPE,
-						 * CACHABLE/PREFETCHABLE */
-};
-
-/* AMBA Plug&Play AHB Masters & Slaves information locations
- * Max devices is 64 supported by HW, however often only 16
- * are used.
- */
-struct ambapp_pnp_info {
-	struct ambapp_pnp_ahb	masters[64];
-	struct ambapp_pnp_ahb	slaves[63];
-	const unsigned int	unused[4];
-	const unsigned int	systemid[4];
-};
-
-/* Describes a AMBA PnP bus */
-struct ambapp_bus {
-	int		buses;		/* Number of buses */
-	unsigned int	ioareas[6];	/* PnP I/O AREAs of AHB buses */
-	unsigned int	freq;		/* Frequency of bus0 [Hz] */
-};
-
-/* Processor Local AMBA bus */
-extern struct ambapp_bus ambapp_plb;
-
-/* Get Bus frequency of a certain AMBA bus */
-extern unsigned int ambapp_bus_freq(
-	struct ambapp_bus *abus,
-	int ahb_bus_index
-	);
-
-/* AMBA PnP information of a APB Device */
-typedef struct {
-	unsigned int vendor;
-	unsigned int device;
-	unsigned char irq;
-	unsigned char ver;
-	unsigned int address;
-	unsigned int mask;
-	int ahb_bus_index;
-} ambapp_apbdev;
-
-/* AMBA PnP information of a AHB Device */
-typedef struct {
-	unsigned int vendor;
-	unsigned int device;
-	unsigned char irq;
-	unsigned char ver;
-	unsigned int userdef[3];
-	unsigned int address[4];
-	unsigned int mask[4];
-	int type[4];
-	int ahb_bus_index;
-} ambapp_ahbdev;
-
-/* Scan AMBA Bus for AHB Bridges */
-extern void ambapp_bus_init(
-	unsigned int ioarea,
-	unsigned int freq,
-	struct ambapp_bus *abus);
-
-/* Find APB Slave device by index using breath first search.
- *
- * When vendor and device are both set to zero, any device
- * with a non-zero device ID will match the search. It may be
- * useful when processing all devices on a AMBA bus.
- */
-extern int ambapp_apb_find(
-	struct ambapp_bus *abus,
-	int vendor,
-	int device,
-	int index,
-	ambapp_apbdev *dev
-	);
-
-/* Find AHB Master device by index using breath first search.
- *
- * When vendor and device are both set to zero, any device
- * with a non-zero device ID will match the search. It may be
- * useful when processing all devices on a AMBA bus.
- */
-extern int ambapp_ahbmst_find(
-	struct ambapp_bus *abus,
-	int vendor,
-	int device,
-	int index,
-	ambapp_ahbdev *dev
-	);
-
-/* Find AHB Slave device by index using breath first search.
- *
- * When vendor and device are both set to zero, any device
- * with a non-zero device ID will match the search. It may be
- * useful when processing all devices on a AMBA bus.
- */
-extern int ambapp_ahbslv_find(
-	struct ambapp_bus *abus,
-	int vendor,
-	int device,
-	int index,
-	ambapp_ahbdev *dev
-	);
-
-/* Return number of APB Slave devices of a certain ID (VENDOR:DEVICE)
- * zero is returned if no devices was found.
- */
-extern int ambapp_apb_count(struct ambapp_bus *abus, int vendor, int device);
-
-/* Return number of AHB Master devices of a certain ID (VENDOR:DEVICE)
- * zero is returned if no devices was found.
- */
-extern int ambapp_ahbmst_count(struct ambapp_bus *abus, int vendor, int device);
-
-/* Return number of AHB Slave devices of a certain ID (VENDOR:DEVICE)
- * zero is returned if no devices was found.
- */
-extern int ambapp_ahbslv_count(struct ambapp_bus *abus, int vendor, int device);
-
-#ifdef CONFIG_CMD_AMBAPP
-
-/* AMBA Plug&Play relocation & initialization */
-int ambapp_init_reloc(void);
-
-/* AMBA Plug&Play Name of Vendors and devices */
-
-/* Return name of device */
-char *ambapp_device_id2str(int vendor, int id);
-
-/* Return name of vendor */
-char *ambapp_vendor_id2str(int vendor);
-
-/* Return description of a device */
-char *ambapp_device_id2desc(int vendor, int id);
-
-#endif
-
-#endif /* defined(__ASSEMBLER__) */
-
-#define AMBA_DEFAULT_IOAREA 0xfff00000
-#define AMBA_CONF_AREA 0xff000
-#define AMBA_AHB_SLAVE_CONF_AREA 0x800
-
-#define DEV_NONE	0
-#define DEV_AHB_MST	1
-#define DEV_AHB_SLV	2
-#define DEV_APB_SLV	3
-
-#define AMBA_TYPE_APBIO 0x1
-#define AMBA_TYPE_MEM 0x2
-#define AMBA_TYPE_AHBIO 0x3
-
-/* ID layout for APB and AHB devices */
-#define AMBA_PNP_ID(vendor, device) (((vendor)<<24) | ((device)<<12))
-
-/* APB Slave PnP layout definitions */
-#define AMBA_APB_ID_OFS		(0*4)
-#define AMBA_APB_IOBAR_OFS	(1*4)
-#define AMBA_APB_CONF_LENGH	(2*4)
-
-/* AHB Master/Slave layout PnP definitions */
-#define AMBA_AHB_ID_OFS		(0*4)
-#define AMBA_AHB_CUSTOM0_OFS	(1*4)
-#define AMBA_AHB_CUSTOM1_OFS	(2*4)
-#define AMBA_AHB_CUSTOM2_OFS	(3*4)
-#define AMBA_AHB_MBAR0_OFS	(4*4)
-#define AMBA_AHB_MBAR1_OFS	(5*4)
-#define AMBA_AHB_MBAR2_OFS	(6*4)
-#define AMBA_AHB_MBAR3_OFS	(7*4)
-#define AMBA_AHB_CONF_LENGH	(8*4)
-
-/* Macros for extracting information from AMBA PnP information
- * registers.
- */
-
-#define amba_vendor(x) (((x) >> 24) & 0xff)
-
-#define amba_device(x) (((x) >> 12) & 0xfff)
-
-#define amba_irq(conf) ((conf) & 0x1f)
-
-#define amba_ver(conf) (((conf)>>5) & 0x1f)
-
-#define amba_iobar_start(base, iobar) \
-	((base) | ((((iobar) & 0xfff00000)>>12) & (((iobar) & 0xfff0)<<4)))
-
-#define amba_membar_start(mbar) \
-	(((mbar) & 0xfff00000) & (((mbar) & 0xfff0) << 16))
-
-#define amba_membar_type(mbar) ((mbar) & 0xf)
-
-#define amba_membar_mask(mbar) (((mbar) >> 4) & 0xfff)
-
-#define amba_ahbio_adr(addr, base_ioarea) \
-	((unsigned int)(base_ioarea) | ((addr) >> 12))
-
-#define amba_apb_mask(iobar) ((~(amba_membar_mask(iobar)<<8) & 0x000fffff) + 1)
-
-#endif
diff --git a/include/ambapp_ids.h b/include/ambapp_ids.h
deleted file mode 100644
index 1eae34e554a4..000000000000
--- a/include/ambapp_ids.h
+++ /dev/null
@@ -1,250 +0,0 @@
-/* AMBA Plug & Play Bus Vendor and Device IDs.
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-
-#ifndef __AMBAPP_IDS_H__
-#define __AMBAPP_IDS_H__
-
-/* Vendor ID defines */
-#define VENDOR_GAISLER       0x01
-#define VENDOR_PENDER        0x02
-#define VENDOR_ESA           0x04
-#define VENDOR_ASTRIUM       0x06
-#define VENDOR_OPENCHIP      0x07
-#define VENDOR_OPENCORES     0x08
-#define VENDOR_CONTRIB       0x09
-#define VENDOR_EONIC         0x0b
-#define VENDOR_RADIONOR      0x0f
-#define VENDOR_GLEICHMANN    0x10
-#define VENDOR_MENTA         0x11
-#define VENDOR_SUN           0x13
-#define VENDOR_MOVIDIA       0x14
-#define VENDOR_ORBITA        0x17
-#define VENDOR_SYNOPSYS      0x21
-#define VENDOR_NASA          0x22
-#define VENDOR_S3            0x31
-#define VENDOR_CAL           0xca
-#define VENDOR_EMBEDDIT      0xea
-#define VENDOR_CETON         0xcb
-#define VENDOR_ACTEL         0xac
-#define VENDOR_APPLECORE     0xae
-
-/* Aeroflex Gaisler device ID defines */
-#define GAISLER_LEON2DSU     0x002
-#define GAISLER_LEON3        0x003
-#define GAISLER_LEON3DSU     0x004
-#define GAISLER_ETHAHB       0x005
-#define GAISLER_APBMST       0x006
-#define GAISLER_AHBUART      0x007
-#define GAISLER_SRCTRL       0x008
-#define GAISLER_SDCTRL       0x009
-#define GAISLER_SSRCTRL      0x00a
-#define GAISLER_APBUART      0x00c
-#define GAISLER_IRQMP        0x00d
-#define GAISLER_AHBRAM       0x00e
-#define GAISLER_AHBDPRAM     0x00f
-#define GAISLER_GPTIMER      0x011
-#define GAISLER_PCITRG       0x012
-#define GAISLER_PCISBRG      0x013
-#define GAISLER_PCIFBRG      0x014
-#define GAISLER_PCITRACE     0x015
-#define GAISLER_DMACTRL      0x016
-#define GAISLER_AHBTRACE     0x017
-#define GAISLER_DSUCTRL      0x018
-#define GAISLER_CANAHB       0x019
-#define GAISLER_GPIO         0x01a
-#define GAISLER_AHBROM       0x01b
-#define GAISLER_AHBJTAG      0x01c
-#define GAISLER_ETHMAC       0x01d
-#define GAISLER_SWNODE       0x01e
-#define GAISLER_SPW          0x01f
-#define GAISLER_AHB2AHB      0x020
-#define GAISLER_USBDC        0x021
-#define GAISLER_USB_DCL      0x022
-#define GAISLER_DDRMP        0x023
-#define GAISLER_ATACTRL      0x024
-#define GAISLER_DDRSP        0x025
-#define GAISLER_EHCI         0x026
-#define GAISLER_UHCI         0x027
-#define GAISLER_I2CMST       0x028
-#define GAISLER_SPW2         0x029
-#define GAISLER_AHBDMA       0x02a
-#define GAISLER_NUHOSP3      0x02b
-#define GAISLER_CLKGATE      0x02c
-#define GAISLER_SPICTRL      0x02d
-#define GAISLER_DDR2SP       0x02e
-#define GAISLER_SLINK        0x02f
-#define GAISLER_GRTM         0x030
-#define GAISLER_GRTC         0x031
-#define GAISLER_GRPW         0x032
-#define GAISLER_GRCTM        0x033
-#define GAISLER_GRHCAN       0x034
-#define GAISLER_GRFIFO       0x035
-#define GAISLER_GRADCDAC     0x036
-#define GAISLER_GRPULSE      0x037
-#define GAISLER_GRTIMER      0x038
-#define GAISLER_AHB2PP       0x039
-#define GAISLER_GRVERSION    0x03a
-#define GAISLER_APB2PW       0x03b
-#define GAISLER_PW2APB       0x03c
-#define GAISLER_GRCAN        0x03d
-#define GAISLER_I2CSLV       0x03e
-#define GAISLER_U16550       0x03f
-#define GAISLER_AHBMST_EM    0x040
-#define GAISLER_AHBSLV_EM    0x041
-#define GAISLER_GRTESTMOD    0x042
-#define GAISLER_ASCS         0x043
-#define GAISLER_IPMVBCTRL    0x044
-#define GAISLER_SPIMCTRL     0x045
-#define GAISLER_L4STAT       0x047
-#define GAISLER_LEON4        0x048
-#define GAISLER_LEON4DSU     0x049
-#define GAISLER_PWM          0x04a
-#define GAISLER_L2CACHE      0x04b
-#define GAISLER_SDCTRL64     0x04c
-#define GAISLER_GR1553B      0x04d
-#define GAISLER_1553TST      0x04e
-#define GAISLER_GRIOMMU      0x04f
-#define GAISLER_FTAHBRAM     0x050
-#define GAISLER_FTSRCTRL     0x051
-#define GAISLER_AHBSTAT      0x052
-#define GAISLER_LEON3FT      0x053
-#define GAISLER_FTMCTRL      0x054
-#define GAISLER_FTSDCTRL     0x055
-#define GAISLER_FTSRCTRL8    0x056
-#define GAISLER_MEMSCRUB     0x057
-#define GAISLER_FTSDCTRL64   0x058
-#define GAISLER_APBPS2       0x060
-#define GAISLER_VGACTRL      0x061
-#define GAISLER_LOGAN        0x062
-#define GAISLER_SVGACTRL     0x063
-#define GAISLER_T1AHB        0x064
-#define GAISLER_MP7WRAP      0x065
-#define GAISLER_GRSYSMON     0x066
-#define GAISLER_GRACECTRL    0x067
-#define GAISLER_ATAHBSLV     0x068
-#define GAISLER_ATAHBMST     0x069
-#define GAISLER_ATAPBSLV     0x06a
-#define GAISLER_B1553BC      0x070
-#define GAISLER_B1553RT      0x071
-#define GAISLER_B1553BRM     0x072
-#define GAISLER_AES          0x073
-#define GAISLER_ECC          0x074
-#define GAISLER_PCIF         0x075
-#define GAISLER_CLKMOD       0x076
-#define GAISLER_HAPSTRAK     0x077
-#define GAISLER_TEST_1X2     0x078
-#define GAISLER_WILD2AHB     0x079
-#define GAISLER_BIO1         0x07a
-#define GAISLER_AESDMA       0x07b
-#define GAISLER_SATCAN       0x080
-#define GAISLER_CANMUX       0x081
-#define GAISLER_GRTMRX       0x082
-#define GAISLER_GRTCTX       0x083
-#define GAISLER_GRTMDESC     0x084
-#define GAISLER_GRTMVC       0x085
-#define GAISLER_GEFFE        0x086
-#define GAISLER_GPREG        0x087
-#define GAISLER_GRTMPAHB     0x088
-#define GAISLER_SPWCUC       0x089
-#define GAISLER_SPW2_DMA     0x08a
-#define GAISLER_SPWROUTER    0x08b
-
-/* European Space Agency device ID defines */
-#define ESA_LEON2            0x002
-#define ESA_LEON2APB         0x003
-#define ESA_IRQ              0x005
-#define ESA_TIMER            0x006
-#define ESA_UART             0x007
-#define ESA_CFG              0x008
-#define ESA_IO               0x009
-#define ESA_MCTRL            0x00f
-#define ESA_PCIARB           0x010
-#define ESA_HURRICANE        0x011
-#define ESA_SPW_RMAP         0x012
-#define ESA_AHBUART          0x013
-#define ESA_SPWA             0x014
-#define ESA_BOSCHCAN         0x015
-#define ESA_IRQ2             0x016
-#define ESA_AHBSTAT          0x017
-#define ESA_WPROT            0x018
-#define ESA_WPROT2           0x019
-#define ESA_PDEC3AMBA        0x020
-#define ESA_PTME3AMBA        0x021
-
-/* OpenChip device ID defines */
-#define OPENCHIP_APBGPIO     0x001
-#define OPENCHIP_APBI2C      0x002
-#define OPENCHIP_APBSPI      0x003
-#define OPENCHIP_APBCHARLCD  0x004
-#define OPENCHIP_APBPWM      0x005
-#define OPENCHIP_APBPS2      0x006
-#define OPENCHIP_APBMMCSD    0x007
-#define OPENCHIP_APBNAND     0x008
-#define OPENCHIP_APBLPC      0x009
-#define OPENCHIP_APBCF       0x00a
-#define OPENCHIP_APBSYSACE   0x00b
-#define OPENCHIP_APB1WIRE    0x00c
-#define OPENCHIP_APBJTAG     0x00d
-#define OPENCHIP_APBSUI      0x00e
-
-/* Various contributions device ID defines */
-#define CONTRIB_CORE1        0x001
-#define CONTRIB_CORE2        0x002
-
-/* Gleichmann Electronics device ID defines */
-#define GLEICHMANN_CUSTOM    0x001
-#define GLEICHMANN_GEOLCD01  0x002
-#define GLEICHMANN_DAC       0x003
-#define GLEICHMANN_HPI       0x004
-#define GLEICHMANN_SPI       0x005
-#define GLEICHMANN_HIFC      0x006
-#define GLEICHMANN_ADCDAC    0x007
-#define GLEICHMANN_SPIOC     0x008
-#define GLEICHMANN_AC97      0x009
-
-/* Sun Microsystems device ID defines */
-#define SUN_T1               0x001
-#define SUN_S1               0x011
-
-/* Orbita device ID defines */
-#define ORBITA_1553B         0x001
-#define ORBITA_429           0x002
-#define ORBITA_SPI           0x003
-#define ORBITA_I2C           0x004
-#define ORBITA_SMARTCARD     0x064
-#define ORBITA_SDCARD        0x065
-#define ORBITA_UART16550     0x066
-#define ORBITA_CRYPTO        0x067
-#define ORBITA_SYSIF         0x068
-#define ORBITA_PIO           0x069
-#define ORBITA_RTC           0x0c8
-#define ORBITA_COLORLCD      0x12c
-#define ORBITA_PCI           0x190
-#define ORBITA_DSP           0x1f4
-#define ORBITA_USBHOST       0x258
-#define ORBITA_USBDEV        0x2bc
-
-/* NASA device ID defines */
-#define NASA_EP32            0x001
-
-/* CAL device ID defines */
-#define CAL_DDRCTRL          0x188
-
-/* Actel Corporation device ID defines */
-#define ACTEL_COREMP7        0x001
-
-/* AppleCore device ID defines */
-#define APPLECORE_UTLEON3    0x001
-#define APPLECORE_UTLEON3DSU 0x002
-
-/* Opencores device id's */
-#define OPENCORES_PCIBR  0x4
-#define OPENCORES_ETHMAC 0x5
-
-#endif
diff --git a/include/configs/gr_cpci_ax2000.h b/include/configs/gr_cpci_ax2000.h
deleted file mode 100644
index c2655552f1c0..000000000000
--- a/include/configs/gr_cpci_ax2000.h
+++ /dev/null
@@ -1,340 +0,0 @@
-/* Configuration header file for Gaisler GR-CPCI-AX2000
- * AX board. Note that since the AX is removable the configuration
- * for this board must be edited below.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_CPCI_AX2000	1	/* ... on GR-CPCI-AX2000 board */
-
-#define CONFIG_LEON_RAM_SRAM 1
-#define CONFIG_LEON_RAM_SDRAM 2
-#define CONFIG_LEON_RAM_SDRAM_NOSRAM 3
-
-/* Select Memory to run from
- *
- * SRAM          - UBoot is run in SRAM, SRAM-0x40000000, SDRAM-0x60000000
- * SDRAM         - UBoot is run in SDRAM, SRAM-0x40000000 and SDRAM-0x60000000
- * SDRAM_NOSRAM  - UBoot is run in SDRAM, SRAM not available, SDRAM at 0x40000000
- *
- * Note, if Linux is to be used, SDRAM or SDRAM_NOSRAM is required since
- * it doesn't fit into the 4Mb SRAM.
- *
- * SRAM is default since it will work for all systems, however will not
- * be able to boot linux.
- */
-#define CONFIG_LEON_RAM_SELECT CONFIG_LEON_RAM_SRAM
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ	20000000	/* 20MHz */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_IRQ
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define	CONFIG_EXTRA_ENV_SETTINGS_BASE					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw "	\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"getkernel=tftpboot $(scratch) $(bootfile)\0" \
-	"bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:ax2000:eth0\0"
-
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
-#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
-	"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"scratch=40200000\0"					\
-	""
-#elif CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM
-#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
-	"net_nfs=tftp 60000000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"scratch=60800000\0"					\
-	""
-#else
-/* More than 4Mb is assumed when running from SDRAM */
-#define CONFIG_EXTRA_ENV_SETTINGS_SELECT \
-	"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"scratch=40800000\0"					\
-	""
-#endif
-
-#define	CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS_BASE CONFIG_EXTRA_ENV_SETTINGS_SELECT
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.20
-#define CONFIG_IPADDR 192.168.0.206
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME  ax2000
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-/* Memory MAP
- *
- *  Flash:
- *  |--------------------------------|
- *  | 0x00000000 Text & Data & BSS   | *
- *  |            for Monitor         | *
- *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- *  | UNUSED / Growth                | * 256kb
- *  |--------------------------------|
- *  | 0x00050000 Base custom area    | *
- *  |            kernel / FS         | *
- *  |                                | * Rest of Flash
- *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- *  | END-0x00008000 Environment     | * 32kb
- *  |--------------------------------|
- *
- *
- *
- *  Main Memory (4Mb SRAM or XMb SDRAM):
- *  |--------------------------------|
- *  | UNUSED / scratch area          |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |--------------------------------|
- *  | Monitor .Text / .DATA / .BSS   | * 256kb
- *  | Relocated!                     | *
- *  |--------------------------------|
- *  | Monitor Malloc                 | * 128kb (contains relocated environment)
- *  |--------------------------------|
- *  | Monitor/kernel STACK           | * 64kb
- *  |--------------------------------|
- *  | Page Table for MMU systems     | * 2k
- *  |--------------------------------|
- *  | PROM Code accessed from Linux  | * 6kb-128b
- *  |--------------------------------|
- *  | Global data (avail from kernel)| * 128b
- *  |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at  0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- *               0xFE000000 for 32 MB
- *               0xFF000000 for 16 MB
- *               0xFF800000 for  8 MB
- */
-#define CONFIG_SYS_FLASH_BASE		0x00000000
-#define CONFIG_SYS_FLASH_SIZE		0x00800000
-
-#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Bypass cache when reading regs from flash memory */
-#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
-/* Buffered writes (32byte/go) instead of single accesses */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/*
- * Environment settings
- */
-/*#define CONFIG_ENV_IS_NOWHERE 1*/
-#define CONFIG_ENV_IS_IN_FLASH	1
-/* CONFIG_ENV_ADDR need to be at sector boundary */
-#define CONFIG_ENV_SIZE		0x8000
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OVERWRITE	1
-
-/*
- * Memory map
- *
- * Always 4Mb SRAM available
- * SDRAM module may be available on 0x60000000, SDRAM
- * is configured as if a 128Mb SDRAM module is available.
- */
-
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#else
-#define CONFIG_SYS_SDRAM_BASE		0x60000000
-#endif
-
-#define CONFIG_SYS_SDRAM_SIZE		0x08000000
-#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
-
-/* 4Mb SRAM available */
-#if CONFIG_LEON_RAM_SELECT != CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_SRAM_BASE 0x40000000
-#define CONFIG_SYS_SRAM_SIZE 0x400000
-#define CONFIG_SYS_SRAM_END  (CONFIG_SYS_SRAM_BASE+CONFIG_SYS_SRAM_SIZE)
-#endif
-
-/* Select RAM used to run U-BOOT from... */
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SRAM
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SRAM_END
-#else
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-#endif
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE		(8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-/*
- * Ethernet configuration uses on board SMC91C111
- */
-#define CONFIG_SMC91111          1
-#define CONFIG_SMC91111_BASE		0x20000300	/* chip select 3         */
-#define CONFIG_SMC_USE_32_BIT		1	/* 32 bit bus  */
-#undef  CONFIG_SMC_91111_EXT_PHY	/* we use internal phy   */
-/*#define CONFIG_SHOW_ACTIVITY*/
-#define CONFIG_NET_RETRY_COUNT		10	/* # of retries          */
-
-#define CONFIG_PHY_ADDR	 0x00
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/*
- * Various low-level settings
- */
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK	0x0001BBBB
-#define CONFIG_USB_CONFIG	0x00005000
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM    0
-
-/* No SDRAM Configuration */
-#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-
-/* See, GRLIB Docs (grip.pdf) on how to set up
- * These the memory controller registers.
- */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x10f800ff | (1<<11))
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
-#else
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82205260
-#endif
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x0809a000
-
-/* GRLIB FT-MCTRL configuration */
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x10f800ff | (1<<11))
-#if CONFIG_LEON_RAM_SELECT == CONFIG_LEON_RAM_SDRAM_NOSRAM
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
-#else
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82205260
-#endif
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x0809a000
-
-/* no DDR controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-
-/* no DDR2 Controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-#endif				/* __CONFIG_H */
diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h
deleted file mode 100644
index 0d513c551943..000000000000
--- a/include/configs/gr_ep2s60.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/* Configuration header file for Gaisler Research AB's Template
- * design (GPL Open Source SPARC/LEON3 96MHz) for Altera NIOS
- * Development board Stratix II edition, with the FPGA device
- * EP2S60.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2008
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-/* Altera NIOS Development board, Stratix II board */
-#define CONFIG_GR_EP2S60	1
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ	96000000	/* 96MHz */
-
-/* Define this is the GR-2S60-MEZZ mezzanine is available and you
- * want to use the USB and GRETH functionality of the board
- */
-#undef GR_2S60_MEZZ
-
-#ifdef GR_2S60_MEZZ
-#define USE_GRETH 1
-#define USE_GRUSB 1
-#endif
-
-/*
- * Serial console configuration
- */
-#define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_IRQ
-
-/* USB support */
-#if USE_GRUSB
-#define CONFIG_USB_UHCI
-/* Enable needed helper functions */
-#endif
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw "	\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"scratch=40800000\0"					\
-	"getkernel=tftpboot $(scratch) $(bootfile)\0" \
-	"bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.207:192.168.0.20:192.168.0.1:255.255.255.0:ml401:eth0\0" \
-	""
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.20
-#define CONFIG_IPADDR 192.168.0.207
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME  ml401
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-/* Memory MAP
- *
- *  Flash:
- *  |--------------------------------|
- *  | 0x00000000 Text & Data & BSS   | *
- *  |            for Monitor         | *
- *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- *  | UNUSED / Growth                | * 256kb
- *  |--------------------------------|
- *  | 0x00050000 Base custom area    | *
- *  |            kernel / FS         | *
- *  |                                | * Rest of Flash
- *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- *  | END-0x00008000 Environment     | * 32kb
- *  |--------------------------------|
- *
- *
- *
- *  Main Memory:
- *  |--------------------------------|
- *  | UNUSED / scratch area          |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |--------------------------------|
- *  | Monitor .Text / .DATA / .BSS   | * 512kb
- *  | Relocated!                     | *
- *  |--------------------------------|
- *  | Monitor Malloc                 | * 128kb (contains relocated environment)
- *  |--------------------------------|
- *  | Monitor/kernel STACK           | * 64kb
- *  |--------------------------------|
- *  | Page Table for MMU systems     | * 2k
- *  |--------------------------------|
- *  | PROM Code accessed from Linux  | * 6kb-128b
- *  |--------------------------------|
- *  | Global data (avail from kernel)| * 128b
- *  |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at  0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- *               0xFE000000 for 32 MB
- *               0xFF000000 for 16 MB
- *               0xFF800000 for  8 MB
- */
-#define CONFIG_SYS_FLASH_BASE		0x00000000
-#define CONFIG_SYS_FLASH_SIZE		0x00400000	/* FPGA Bit file is in top of FLASH, we only ues the bottom 4Mb */
-
-#define PHYS_FLASH_SECT_SIZE	0x00010000	/* 64 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Bypass cache when reading regs from flash memory */
-#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
-/* Buffered writes (32byte/go) instead of single accesses */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/*
- * Environment settings
- */
-/*#define CONFIG_ENV_IS_NOWHERE 1*/
-#define CONFIG_ENV_IS_IN_FLASH	1
-/* CONFIG_ENV_ADDR need to be at sector boundary */
-#define CONFIG_ENV_SIZE		0x8000
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OVERWRITE	1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_SIZE		0x02000000
-#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
-
-/* no SRAM available */
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE		(8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-/*
- * Ethernet configuration uses on board SMC91C111, however if a mezzanine
- * with a PHY is attached the GRETH can be used on this board.
- * Define USE_GRETH in order to use the mezzanine provided PHY with the
- * onchip GRETH network MAC, note that this is not supported by the
- * template design.
- */
-#ifndef USE_GRETH
-
-/* USE SMC91C111 MAC */
-#define CONFIG_SMC91111          1
-#define CONFIG_SMC91111_BASE		0x20000300	/* chip select 3         */
-#define CONFIG_SMC_USE_32_BIT		1	/* 32 bit bus  */
-#undef  CONFIG_SMC_91111_EXT_PHY	/* we use internal phy   */
-/*#define CONFIG_SHOW_ACTIVITY*/
-#define CONFIG_NET_RETRY_COUNT		10	/* # of retries          */
-
-#else
-
-/* USE GRETH Ethernet Driver */
-#define CONFIG_GRETH	1
-#endif
-
-#define CONFIG_PHY_ADDR	 0x00
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK	0x0001BBBB
-#define CONFIG_USB_CONFIG	0x00005000
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM    0
-
-/* No SDRAM Configuration */
-#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-
-/* See, GRLIB Docs (grip.pdf) on how to set up
- * These the memory controller registers.
- */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1  (0x10f800ff | (1<<11))
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2  0x00000000
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3  0x00000000
-
-/* GRLIB FT-MCTRL configuration */
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1  (0x10f800ff | (1<<11))
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2  0x00000000
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3  0x00000000
-
-/* DDR controller */
-#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL  0xa900830a
-
-/* no DDR2 Controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-#endif				/* __CONFIG_H */
diff --git a/include/configs/gr_xc3s_1500.h b/include/configs/gr_xc3s_1500.h
deleted file mode 100644
index 20eeab33d9c9..000000000000
--- a/include/configs/gr_xc3s_1500.h
+++ /dev/null
@@ -1,272 +0,0 @@
-/* Configuration header file for Gaisler GR-XC3S-1500
- * spartan board.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_GRXC3S1500	1	/* ... on GR-XC3S-1500 board */
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ	40000000	/* 40MHz */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_IRQ
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw "	\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"scratch=40200000\0"					\
-	"getkernel=tftpboot $(scratch) $(bootfile)\0" \
-	"bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.206:192.168.0.20:192.168.0.1:255.255.255.0:grxc3s1500_daniel:eth0\0" \
-	""
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.20
-#define CONFIG_IPADDR 192.168.0.206
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME  grxc3s1500
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-/* Memory MAP
- *
- *  Flash:
- *  |--------------------------------|
- *  | 0x00000000 Text & Data & BSS   | *
- *  |            for Monitor         | *
- *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- *  | UNUSED / Growth                | * 256kb
- *  |--------------------------------|
- *  | 0x00050000 Base custom area    | *
- *  |            kernel / FS         | *
- *  |                                | * Rest of Flash
- *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- *  | END-0x00008000 Environment     | * 32kb
- *  |--------------------------------|
- *
- *
- *
- *  Main Memory:
- *  |--------------------------------|
- *  | UNUSED / scratch area          |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |--------------------------------|
- *  | Monitor .Text / .DATA / .BSS   | * 256kb
- *  | Relocated!                     | *
- *  |--------------------------------|
- *  | Monitor Malloc                 | * 128kb (contains relocated environment)
- *  |--------------------------------|
- *  | Monitor/kernel STACK           | * 64kb
- *  |--------------------------------|
- *  | Page Table for MMU systems     | * 2k
- *  |--------------------------------|
- *  | PROM Code accessed from Linux  | * 6kb-128b
- *  |--------------------------------|
- *  | Global data (avail from kernel)| * 128b
- *  |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at  0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- *               0xFE000000 for 32 MB
- *               0xFF000000 for 16 MB
- *               0xFF800000 for  8 MB
- */
-#define CONFIG_SYS_FLASH_BASE		0x00000000
-#define CONFIG_SYS_FLASH_SIZE		0x00800000
-
-#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Bypass cache when reading regs from flash memory */
-#define CONFIG_SYS_FLASH_CFI_BYPASS_READ
-/* Buffered writes (32byte/go) instead of single accesses */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/*
- * Environment settings
- */
-/*#define CONFIG_ENV_IS_NOWHERE 1*/
-#define CONFIG_ENV_IS_IN_FLASH	1
-/* CONFIG_ENV_ADDR need to be at sector boundary */
-#define CONFIG_ENV_SIZE		0x8000
-#define CONFIG_ENV_SECT_SIZE	0x20000
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OVERWRITE	1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_SIZE		0x4000000
-#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
-
-/* no SRAM available */
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-/* Always Run U-Boot from SDRAM */
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE		(8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-/*
- * Ethernet configuration
- */
-#define CONFIG_GRETH	1
-
-#define CONFIG_PHY_ADDR	 0x00
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/*
- * Various low-level settings
- */
-
-/*-----------------------------------------------------------------------
- * USB stuff
- *-----------------------------------------------------------------------
- */
-#define CONFIG_USB_CLOCK	0x0001BBBB
-#define CONFIG_USB_CONFIG	0x00005000
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM    0
-
-/* No SDRAM Configuration */
-#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-
-/* See, GRLIB Docs (grip.pdf) on how to set up
- * These the memory controller registers.
- */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x00136000
-
-/* GRLIB FT-MCTRL configuration */
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x00136000
-
-/* no DDR controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-
-/* no DDR2 Controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-#endif				/* __CONFIG_H */
diff --git a/include/configs/grsim.h b/include/configs/grsim.h
deleted file mode 100644
index 18b8d3cbcbbe..000000000000
--- a/include/configs/grsim.h
+++ /dev/null
@@ -1,314 +0,0 @@
-/* Configuration header file for LEON3 GRSIM, trying to be similar
- * to Gaisler's GR-XC3S-1500 board.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2007
- * Daniel Hellstrom, Gaisler Research, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- *
- * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
- *
- * TSIM command:
- * $ tsim-leon3 -sdram 32768 -ram 4096 -rom 2048 -mmu -cas
- *
- * In the evaluation version of TSIM, the -sdram/-ram/-rom arguments are
- * hard-coded to these values and need not be specified. (see below)
- *
- * Get TSIM from http://www.gaisler.com/index.php/downloads/simulators
- */
-
-#define CONFIG_GRSIM		0	/* ... not running on GRSIM */
-#define CONFIG_TSIM		1	/* ... running on TSIM */
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ	40000000	/* 40MHz */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"rootpath=/export/roofs\0"					\
-	"scratch=40000000\0"					\
-	"getkernel=tftpboot $(scratch) $(bootfile)\0" \
-	"bootargs=console=ttyS0,38400" \
-	""
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.81
-#define CONFIG_IPADDR 192.168.0.80
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME  grxc3s1500
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-/* Memory MAP
- *
- *  Flash:
- *  |--------------------------------|
- *  | 0x00000000 Text & Data & BSS   | *
- *  |            for Monitor         | *
- *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- *  | UNUSED / Growth                | * 256kb
- *  |--------------------------------|
- *  | 0x00050000 Base custom area    | *
- *  |            kernel / FS         | *
- *  |                                | * Rest of Flash
- *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- *  | END-0x00008000 Environment     | * 32kb
- *  |--------------------------------|
- *
- *
- *
- *  Main Memory:
- *  |--------------------------------|
- *  | UNUSED / scratch area          |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |--------------------------------|
- *  | Monitor .Text / .DATA / .BSS   | * 256kb
- *  | Relocated!                     | *
- *  |--------------------------------|
- *  | Monitor Malloc                 | * 128kb (contains relocated environment)
- *  |--------------------------------|
- *  | Monitor/kernel STACK           | * 64kb
- *  |--------------------------------|
- *  | Page Table for MMU systems     | * 2k
- *  |--------------------------------|
- *  | PROM Code accessed from Linux  | * 6kb-128b
- *  |--------------------------------|
- *  | Global data (avail from kernel)| * 128b
- *  |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at  0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- *               0xFE000000 for 32 MB
- *               0xFF000000 for 16 MB
- *               0xFF800000 for  8 MB
- */
-#define CONFIG_SYS_FLASH_BASE		0x00000000
-#define CONFIG_SYS_FLASH_SIZE		0x00800000
-#define CONFIG_ENV_SIZE		0x8000
-
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
-
-#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-
-#ifdef ENABLE_FLASH_SUPPORT
-/* For use with grsim FLASH emulation extension */
-#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-
-#undef CONFIG_FLASH_8BIT	/* Flash is 32-bit */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#endif
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_NOWHERE 1
-/*#define CONFIG_ENV_IS_IN_FLASH*/
-/*#define CONFIG_ENV_SIZE		0x8000*/
-#define CONFIG_ENV_SECT_SIZE	0x40000
-#define CONFIG_ENV_OVERWRITE	1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE		0x60000000
-#define CONFIG_SYS_SDRAM_SIZE		0x02000000 /* 32MiB SDRAM */
-#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE)
-
-#define CONFIG_SYS_SRAM_BASE		0x40000000
-#define CONFIG_SYS_SRAM_SIZE		0x00400000 /* 4MiB SRAM */
-#define CONFIG_SYS_SRAM_END		(CONFIG_SYS_SRAM_BASE + CONFIG_SYS_SRAM_SIZE)
-
-/* Always Run U-Boot from SDRAM */
-#define CONFIG_SYS_RAM_BASE		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE		CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END		CONFIG_SYS_SDRAM_END
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE		(8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-#ifdef CONFIG_CMD_NET
-/*
- * Ethernet configuration
- */
-#define CONFIG_GRETH	1
-
-/*
- * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
- */
-/* #define CONFIG_GRETH_10MBIT 1 */
-#define CONFIG_PHY_ADDR		0x00
-
-#endif /* CONFIG_CMD_NET */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM     0
-
-#define CONFIG_SYS_GRLIB_MEMCFG1   (0x000000ff | (1<<11))
-
-/* No SDRAM Configuration */
-#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
-
-/* LEON2 MCTRL configuration */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1   (0x000000ff | (1<<11))
-#if CONFIG_GRSIM
-/* GRSIM configuration */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x82206000
-#else
-/* TSIM configuration */
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2   0x81805220
-#endif
-#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3   0x00136000
-
-/* GRLIB FT-MCTRL configuration */
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1   (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2   0x82206000
-#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3   0x00136000
-
-/* no DDR controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
-
-/* no DDR2 Controller */
-#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-/* TSIM command:
- * $ ./tsim-leon3 -mmu -cas
- *
- *  This TSIM evaluation version will expire 2015-04-02
- *
- *
- *  TSIM/LEON3 SPARC simulator, version 2.0.35 (evaluation version)
- *
- *  Copyright (C) 2014, Aeroflex Gaisler - all rights reserved.
- *  This software may only be used with a valid license.
- *  For latest updates, go to http://www.gaisler.com/
- *  Comments or bug-reports to support at gaisler.com
- *
- * serial port A on stdin/stdout
- * allocated 4096 K SRAM memory, in 1 bank
- * allocated 32 M SDRAM memory, in 1 bank
- * allocated 2048 K ROM memory
- * icache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
- * dcache: 1 * 4 kbytes, 16 bytes/line (4 kbytes total)
- * tsim> leon
- * 0x80000000   Memory configuration register 1   0x000002ff
- * 0x80000004   Memory configuration register 2   0x81805220
- * 0x80000008   Memory configuration register 3   0x00000000
- */
-
-#endif				/* __CONFIG_H */
diff --git a/include/configs/grsim_leon2.h b/include/configs/grsim_leon2.h
deleted file mode 100644
index ba570c38a9f2..000000000000
--- a/include/configs/grsim_leon2.h
+++ /dev/null
@@ -1,284 +0,0 @@
-/* Configuration header file for LEON2 GRSIM.
- *
- * (C) Copyright 2003-2005
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * (C) Copyright 2007, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H__
-#define __CONFIG_H__
-
-/*
- * High Level Configuration Options
- * (easy to change)
- *
- * Select between TSIM or GRSIM by setting CONFIG_GRSIM or CONFIG_TSIM to 1.
- *
- * TSIM command
- *  tsim-leon -sdram 0 -ram 32000 -rom 8192 -mmu
- *
- */
-
-#define CONFIG_GRSIM		0	/* ... not running on GRSIM */
-#define CONFIG_TSIM		1	/* ... running on TSIM */
-
-/* CPU / AMBA BUS configuration */
-#define CONFIG_SYS_CLK_FREQ	40000000	/* 40MHz */
-
-/*
- * Serial console configuration
- */
-#define CONFIG_BAUDRATE		38400	/* ... at 38400 bps */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
-
-/* Partitions */
-
-/*
- * Supported commands
- */
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FPGA_LOADMK
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-
-/*
- * Autobooting
- */
-
-#define CONFIG_PREBOOT	"echo;"	\
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
-	"echo"
-
-#undef	CONFIG_BOOTARGS
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"netdev=eth0\0"							\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_nfs=run nfsargs addip;"					\
-		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip;"					\
-		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0"	\
-	"rootpath=/export/roofs\0"					\
-	"scratch=40000000\0"					\
-	"getkernel=tftpboot $(scratch) $(bootfile)\0" \
-	"bootargs=console=ttyS0,38400" \
-	""
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_SERVERIP 192.168.0.81
-#define CONFIG_IPADDR 192.168.0.80
-#define CONFIG_ROOTPATH "/export/rootfs"
-#define CONFIG_HOSTNAME  grxc3s1500
-#define CONFIG_BOOTFILE "/uImage"
-
-#define CONFIG_BOOTCOMMAND	"run flash_self"
-
-/* Memory MAP
- *
- *  Flash:
- *  |--------------------------------|
- *  | 0x00000000 Text & Data & BSS   | *
- *  |            for Monitor         | *
- *  | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| *
- *  | UNUSED / Growth                | * 256kb
- *  |--------------------------------|
- *  | 0x00050000 Base custom area    | *
- *  |            kernel / FS         | *
- *  |                                | * Rest of Flash
- *  |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|
- *  | END-0x00008000 Environment     | * 32kb
- *  |--------------------------------|
- *
- *
- *
- *  Main Memory:
- *  |--------------------------------|
- *  | UNUSED / scratch area          |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |                                |
- *  |--------------------------------|
- *  | Monitor .Text / .DATA / .BSS   | * 256kb
- *  | Relocated!                     | *
- *  |--------------------------------|
- *  | Monitor Malloc                 | * 128kb (contains relocated environment)
- *  |--------------------------------|
- *  | Monitor/kernel STACK           | * 64kb
- *  |--------------------------------|
- *  | Page Table for MMU systems     | * 2k
- *  |--------------------------------|
- *  | PROM Code accessed from Linux  | * 6kb-128b
- *  |--------------------------------|
- *  | Global data (avail from kernel)| * 128b
- *  |--------------------------------|
- *
- */
-
-/*
- * Flash configuration (8,16 or 32 MB)
- * TEXT base always at 0xFFF00000
- * ENV_ADDR always at  0xFFF40000
- * FLASH_BASE at 0xFC000000 for 64 MB
- *               0xFE000000 for 32 MB
- *               0xFF000000 for 16 MB
- *               0xFF800000 for  8 MB
- */
-#define CONFIG_SYS_FLASH_BASE		0x00000000
-#define CONFIG_SYS_FLASH_SIZE		0x00800000
-#define CONFIG_ENV_SIZE		0x8000
-
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+CONFIG_SYS_FLASH_SIZE-CONFIG_ENV_SIZE)
-
-#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 128 KB sectors */
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max num of sects on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_LOCK_TOUT	5	/* Timeout for Flash Set Lock Bit (in ms) */
-#define CONFIG_SYS_FLASH_UNLOCK_TOUT	10000	/* Timeout for Flash Clear Lock Bits (in ms) */
-
-#ifdef ENABLE_FLASH_SUPPORT
-/* For use with grsim FLASH emulation extension */
-#define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
-
-#undef CONFIG_FLASH_8BIT	/* Flash is 32-bit */
-
-/*** CFI CONFIG ***/
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_8BIT
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#endif
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_NOWHERE 1
-/*#define CONFIG_ENV_IS_IN_FLASH*/
-/*#define CONFIG_ENV_SIZE		0x8000*/
-#define CONFIG_ENV_SECT_SIZE	0x40000
-#define CONFIG_ENV_OVERWRITE	1
-
-/*
- * Memory map
- */
-#define CONFIG_SYS_SDRAM_BASE		0x40000000
-#define CONFIG_SYS_SDRAM_SIZE		0x00800000
-#define CONFIG_SYS_SDRAM_END		(CONFIG_SYS_SDRAM_BASE+CONFIG_SYS_SDRAM_SIZE)
-
-/* no SRAM available */
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-/* Always Run U-Boot from SDRAM */
-#define CONFIG_SYS_RAM_BASE CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_RAM_SIZE CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SYS_RAM_END CONFIG_SYS_SDRAM_END
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_RAM_END - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_PROM_SIZE		(8192-GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_PROM_OFFSET		(CONFIG_SYS_GBL_DATA_OFFSET-CONFIG_SYS_PROM_SIZE)
-
-#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_PROM_OFFSET-32)
-#define CONFIG_SYS_STACK_SIZE		(0x10000-32)
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-#   define CONFIG_SYS_RAMBOOT		1
-#endif
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor   */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
-
-#define CONFIG_SYS_MALLOC_END		(CONFIG_SYS_INIT_SP_OFFSET-CONFIG_SYS_STACK_SIZE)
-#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MALLOC_END-CONFIG_SYS_MALLOC_LEN)
-
-/* relocated monitor area */
-#define CONFIG_SYS_RELOC_MONITOR_MAX_END   CONFIG_SYS_MALLOC_BASE
-#define CONFIG_SYS_RELOC_MONITOR_BASE     (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
-
-/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
-
-/*
- * Ethernet configuration
- */
-/*#define CONFIG_GRETH	1*/
-
-/*
- * Define CONFIG_GRETH_10MBIT to force GRETH at 10Mb/s
- */
-/* #define CONFIG_GRETH_10MBIT 1 */
-#define CONFIG_PHY_ADDR		0x00
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP		/* undef to save memory     */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
-#else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args   */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
-
-#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
-#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM  */
-
-#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
-
-/***** Gaisler GRLIB IP-Cores Config ********/
-
-#define CONFIG_SYS_GRLIB_SDRAM    0
-#define CONFIG_SYS_GRLIB_MEMCFG1  (0x000000ff | (1<<11))
-#if CONFIG_GRSIM
-#define CONFIG_SYS_GRLIB_MEMCFG2  0x82206000
-#else
-#define CONFIG_SYS_GRLIB_MEMCFG2  0x00001820
-#endif
-#define CONFIG_SYS_GRLIB_MEMCFG3  0x00136000
-
-/*** LEON2 UART 1 ***/
-
-/* UART1 Define to 1 or 0 */
-#define LEON2_UART1_LOOPBACK_ENABLE 0
-#define LEON2_UART1_FLOWCTRL_ENABLE 0
-#define LEON2_UART1_PARITY_ENABLE 0
-#define LEON2_UART1_ODDPAR_ENABLE 0
-
-/*** LEON2 UART 2 ***/
-
-/* UART2 Define to 1 or 0 */
-#define LEON2_UART2_LOOPBACK_ENABLE 0
-#define LEON2_UART2_FLOWCTRL_ENABLE 0
-#define LEON2_UART2_PARITY_ENABLE 0
-#define LEON2_UART2_ODDPAR_ENABLE 0
-
-#define LEON_CONSOLE_UART1 1
-#define LEON_CONSOLE_UART2 2
-
-/* Use UART2 as console */
-#define LEON2_CONSOLE_SELECT LEON_CONSOLE_UART1
-
-/* LEON2 I/O Port */
-/*#define LEON2_IO_PORT_DIR 0x0000aa00*/
-
-/* default kernel command line */
-#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"
-
-#endif				/* __CONFIG_H */
diff --git a/include/grlib/apbuart.h b/include/grlib/apbuart.h
deleted file mode 100644
index 1e1eb9a77cad..000000000000
--- a/include/grlib/apbuart.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/* GRLIB APBUART definitions
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __GRLIB_APBUART_H__
-#define __GRLIB_APBUART_H__
-
-/* APBUART Register map */
-typedef struct {
-	volatile unsigned int data;
-	volatile unsigned int status;
-	volatile unsigned int ctrl;
-	volatile unsigned int scaler;
-} ambapp_dev_apbuart;
-
-/*
- *  The following defines the bits in the LEON UART Status Registers.
- */
-
-#define APBUART_STATUS_DR   0x00000001	/* Data Ready */
-#define APBUART_STATUS_TSE  0x00000002	/* TX Send Register Empty */
-#define APBUART_STATUS_THE  0x00000004	/* TX Hold Register Empty */
-#define APBUART_STATUS_BR   0x00000008	/* Break Error */
-#define APBUART_STATUS_OE   0x00000010	/* RX Overrun Error */
-#define APBUART_STATUS_PE   0x00000020	/* RX Parity Error */
-#define APBUART_STATUS_FE   0x00000040	/* RX Framing Error */
-#define APBUART_STATUS_ERR  0x00000078	/* Error Mask */
-
-/*
- *  The following defines the bits in the LEON UART Ctrl Registers.
- */
-
-#define APBUART_CTRL_RE     0x00000001	/* Receiver enable */
-#define APBUART_CTRL_TE     0x00000002	/* Transmitter enable */
-#define APBUART_CTRL_RI     0x00000004	/* Receiver interrupt enable */
-#define APBUART_CTRL_TI     0x00000008	/* Transmitter interrupt enable */
-#define APBUART_CTRL_PS     0x00000010	/* Parity select */
-#define APBUART_CTRL_PE     0x00000020	/* Parity enable */
-#define APBUART_CTRL_FL     0x00000040	/* Flow control enable */
-#define APBUART_CTRL_LB     0x00000080	/* Loop Back enable */
-#define APBUART_CTRL_DBG    (1<<11)	/* Debug Bit used by GRMON */
-
-#endif
diff --git a/include/grlib/gptimer.h b/include/grlib/gptimer.h
deleted file mode 100644
index 8b2b1651b035..000000000000
--- a/include/grlib/gptimer.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* GRLIB GPTIMER (General Purpose Timer) definitions
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __GRLIB_GPTIMER_H__
-#define __GRLIB_GPTIMER_H__
-
-typedef struct {
-	volatile unsigned int val;
-	volatile unsigned int rld;
-	volatile unsigned int ctrl;
-	volatile unsigned int unused;
-} ambapp_dev_gptimer_element;
-
-#define GPTIMER_CTRL_EN	0x1	/* Timer enable */
-#define GPTIMER_CTRL_RS	0x2	/* Timer reStart  */
-#define GPTIMER_CTRL_LD	0x4	/* Timer reLoad */
-#define GPTIMER_CTRL_IE	0x8	/* interrupt enable */
-#define GPTIMER_CTRL_IP	0x10	/* interrupt flag/pending */
-#define GPTIMER_CTRL_CH	0x20	/* Chain with previous timer */
-
-typedef struct {
-	volatile unsigned int scalar;
-	volatile unsigned int scalar_reload;
-	volatile unsigned int config;
-	volatile unsigned int unused;
-	volatile ambapp_dev_gptimer_element e[8];
-} ambapp_dev_gptimer;
-
-#endif
diff --git a/include/grlib/greth.h b/include/grlib/greth.h
deleted file mode 100644
index 89c1e49387ed..000000000000
--- a/include/grlib/greth.h
+++ /dev/null
@@ -1,87 +0,0 @@
-/* Gaisler.com GRETH 10/100/1000 Ethernet MAC definitions
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __GRLIB_GRETH_H__
-#define __GRLIB_GRETH_H__
-
-#define GRETH_FD 0x10
-#define GRETH_RESET 0x40
-#define GRETH_MII_BUSY 0x8
-#define GRETH_MII_NVALID 0x10
-
-/* MII registers */
-#define GRETH_MII_EXTADV_1000FD 0x00000200
-#define GRETH_MII_EXTADV_1000HD 0x00000100
-#define GRETH_MII_EXTPRT_1000FD 0x00000800
-#define GRETH_MII_EXTPRT_1000HD 0x00000400
-
-#define GRETH_MII_100T4 0x00000200
-#define GRETH_MII_100TXFD 0x00000100
-#define GRETH_MII_100TXHD 0x00000080
-#define GRETH_MII_10FD 0x00000040
-#define GRETH_MII_10HD 0x00000020
-
-#define GRETH_BD_EN 0x800
-#define GRETH_BD_WR 0x1000
-#define GRETH_BD_IE 0x2000
-#define GRETH_BD_LEN 0x7FF
-
-#define GRETH_TXEN 0x1
-#define GRETH_INT_TX 0x8
-#define GRETH_TXI 0x4
-#define GRETH_TXBD_STATUS 0x0001C000
-#define GRETH_TXBD_MORE 0x20000
-#define GRETH_TXBD_IPCS 0x40000
-#define GRETH_TXBD_TCPCS 0x80000
-#define GRETH_TXBD_UDPCS 0x100000
-#define GRETH_TXBD_ERR_LC 0x10000
-#define GRETH_TXBD_ERR_UE 0x4000
-#define GRETH_TXBD_ERR_AL 0x8000
-#define GRETH_TXBD_NUM 128
-#define GRETH_TXBD_NUM_MASK (GRETH_TXBD_NUM-1)
-#define GRETH_TX_BUF_SIZE 2048
-
-#define GRETH_INT_RX         0x4
-#define GRETH_RXEN           0x2
-#define GRETH_RXI            0x8
-#define GRETH_RXBD_STATUS    0xFFFFC000
-#define GRETH_RXBD_ERR_AE    0x4000
-#define GRETH_RXBD_ERR_FT    0x8000
-#define GRETH_RXBD_ERR_CRC   0x10000
-#define GRETH_RXBD_ERR_OE    0x20000
-#define GRETH_RXBD_ERR_LE    0x40000
-#define GRETH_RXBD_IP_DEC    0x80000
-#define GRETH_RXBD_IP_CSERR  0x100000
-#define GRETH_RXBD_UDP_DEC   0x200000
-#define GRETH_RXBD_UDP_CSERR 0x400000
-#define GRETH_RXBD_TCP_DEC   0x800000
-#define GRETH_RXBD_TCP_CSERR 0x1000000
-
-#define GRETH_RXBD_NUM 128
-#define GRETH_RXBD_NUM_MASK (GRETH_RXBD_NUM-1)
-#define GRETH_RX_BUF_SIZE 2048
-
-/* Ethernet configuration registers */
-typedef struct _greth_regs {
-	volatile unsigned int control;
-	volatile unsigned int status;
-	volatile unsigned int esa_msb;
-	volatile unsigned int esa_lsb;
-	volatile unsigned int mdio;
-	volatile unsigned int tx_desc_p;
-	volatile unsigned int rx_desc_p;
-	volatile unsigned int edcl_ip;
-} greth_regs;
-
-/* Ethernet buffer descriptor */
-typedef struct _greth_bd {
-	volatile unsigned int stat;
-	unsigned int addr;	/* Buffer address not changed by HW */
-} greth_bd;
-
-#endif
diff --git a/include/grlib/irqmp.h b/include/grlib/irqmp.h
deleted file mode 100644
index 0354d5c21c4c..000000000000
--- a/include/grlib/irqmp.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* GRLIB IRQMP (IRQ Multi-processor controller) definitions
- *
- * (C) Copyright 2010, 2015
- * Daniel Hellstrom, Cobham Gaisler, daniel at gaisler.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __GRLIB_IRQMP_H__
-#define __GRLIB_IRQMP_H__
-
-typedef struct {
-	volatile unsigned int ilevel;
-	volatile unsigned int ipend;
-	volatile unsigned int iforce;
-	volatile unsigned int iclear;
-	volatile unsigned int mstatus;
-	volatile unsigned int notused[11];
-	volatile unsigned int cpu_mask[16];
-	volatile unsigned int cpu_force[16];
-} ambapp_dev_irqmp;
-
-#endif
diff --git a/include/netdev.h b/include/netdev.h
index 7a211bc609dd..8eb8b46619d2 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -50,7 +50,6 @@ int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
 int ftgmac100_initialize(bd_t *bits);
 int ftmac100_initialize(bd_t *bits);
 int ftmac110_initialize(bd_t *bits);
-int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int ks8851_mll_initialize(u8 dev_num, int base_addr);
 int lan91c96_initialize(u8 dev_num, int base_addr);
-- 
1.9.1



More information about the U-Boot mailing list