[U-Boot] [PATCH 05/21] phy: Add STi phy usb support
Marek Vasut
marex at denx.de
Fri Mar 17 16:38:24 UTC 2017
On 03/17/2017 05:25 PM, patrice.chotard at st.com wrote:
> From: Patrice Chotard <patrice.chotard at st.com>
>
> This is the generic phy driver for the picoPHY ports
> used by USB2 and USB3 Host controllers available on
> STiH407 SoC families.
>
> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
> ---
> configs/stih410-b2260_defconfig | 1 +
> drivers/usb/Kconfig | 4 +
> drivers/usb/phy/Kconfig | 11 +++
> drivers/usb/phy/Makefile | 1 +
> drivers/usb/phy/sti_phy_usb.c | 158 ++++++++++++++++++++++++++++++++++++++++
> 5 files changed, 175 insertions(+)
> create mode 100644 drivers/usb/phy/Kconfig
> create mode 100644 drivers/usb/phy/sti_phy_usb.c
>
> diff --git a/configs/stih410-b2260_defconfig b/configs/stih410-b2260_defconfig
> index 9ee2fe4..ade618f 100644
> --- a/configs/stih410-b2260_defconfig
> +++ b/configs/stih410-b2260_defconfig
> @@ -17,6 +17,7 @@ CONFIG_CMD_FS_GENERIC=y
> CONFIG_OF_CONTROL=y
> CONFIG_REGMAP=y
> CONFIG_SYSCON=y
> +CONFIG_MISC=y
> CONFIG_MMC_SDHCI=y
> CONFIG_MMC_SDHCI_STI=y
> CONFIG_PINCTRL=y
> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> index da3ec2f..e30c9d6 100644
> --- a/drivers/usb/Kconfig
> +++ b/drivers/usb/Kconfig
> @@ -94,4 +94,8 @@ endif
>
> source "drivers/usb/gadget/Kconfig"
>
> +comment "USB PHY"
> +
> +source "drivers/usb/phy/Kconfig"
> +
> endif
> diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
> new file mode 100644
> index 0000000..1a86c6e
> --- /dev/null
> +++ b/drivers/usb/phy/Kconfig
> @@ -0,0 +1,11 @@
> +menu "USB PHY drivers"
> +
> +config STI_PHY_USB
> + bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
> + default n
> + help
> + This is the generic phy driver for the picoPHY ports
> + used by USB2 and USB3 Host controllers available on
> + STiH407 SoC families.
> +
> +endmenu
> diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
> index 4e548c2..b50fb5a 100644
> --- a/drivers/usb/phy/Makefile
> +++ b/drivers/usb/phy/Makefile
> @@ -8,3 +8,4 @@
> obj-$(CONFIG_TWL4030_USB) += twl4030.o
> obj-$(CONFIG_OMAP_USB_PHY) += omap_usb_phy.o
> obj-$(CONFIG_ROCKCHIP_USB2_PHY) += rockchip_usb2_phy.o
> +obj-$(CONFIG_STI_PHY_USB) += sti_phy_usb.o
> diff --git a/drivers/usb/phy/sti_phy_usb.c b/drivers/usb/phy/sti_phy_usb.c
> new file mode 100644
> index 0000000..214d7ff
> --- /dev/null
> +++ b/drivers/usb/phy/sti_phy_usb.c
> @@ -0,0 +1,158 @@
> +/*
> + * Copyright (c) 2017
> + * Patrice Chotard <patrice.chotard at st.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <bitfield.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <fdtdec.h>
> +#include <libfdt.h>
> +#include <regmap.h>
> +#include <reset-uclass.h>
> +#include <syscon.h>
> +#include <wait_bit.h>
> +
> +#include <linux/bitops.h>
> +#include <linux/compat.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* Default PHY_SEL and REFCLKSEL configuration */
> +#define STIH407_USB_PICOPHY_CTRL_PORT_CONF 0x6
> +
> +/* ports parameters overriding */
> +#define STIH407_USB_PICOPHY_PARAM_DEF 0x39a4dc
> +
> +#define PHYPARAM_REG 1
> +#define PHYCTRL_REG 2
> +#define PHYPARAM_NB 3
> +
> +struct sti_phy_usb {
> + struct regmap *regmap;
> + struct reset_ctl global_ctl;
> + struct reset_ctl port_ctl;
> + int param;
> + int ctrl;
> +};
> +
> +static int sti_phy_usb_deassert(struct sti_phy_usb *phy)
> +{
> + int ret;
> +
> + ret = reset_deassert(&phy->global_ctl);
> + if (ret < 0) {
> + error("PHY global deassert failed: %d", ret);
> + return ret;
> + }
> +
> + ret = reset_deassert(&phy->port_ctl);
> + if (ret < 0)
> + error("PHY port deassert failed: %d", ret);
> +
> + return ret;
> +}
> +
> +static void sti_phy_usb_init(struct sti_phy_usb *phy)
> +{
> + void __iomem *reg;
> + u32 val;
> +
> + /* set ctrl picophy value */
> + reg = (void __iomem *)phy->regmap->base + phy->ctrl;
> + val = readl(reg);
> + /* CTRL_PORT mask is 0x1f */
> + bitfield_replace(val, 0, 5, STIH407_USB_PICOPHY_CTRL_PORT_CONF);
> + writel(val, reg);
> +
> + /* set ports parameters overriding */
> + reg = (void __iomem *)phy->regmap->base + phy->param;
> + val = readl(reg);
> + /* PARAM_DEF mask is 0xffffffff */
> + bitfield_replace(val, 0, 31, STIH407_USB_PICOPHY_PARAM_DEF);
is that clrsetbits_le32() here ?
> + writel(val, reg);
> +}
> +
> +int sti_phy_usb_probe(struct udevice *dev)
> +{
> + struct sti_phy_usb *priv = dev_get_priv(dev);
> + struct udevice *syscon;
> + struct fdtdec_phandle_args syscfg_phandle;
> + u32 cells[PHYPARAM_NB];
> + int ret, count;
> +
> + /* get corresponding syscon phandle */
> + ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev->of_offset,
> + "st,syscfg", NULL, 0, 0,
> + &syscfg_phandle);
> + if (ret < 0) {
> + error("Can't get syscfg phandle: %d\n", ret);
> + return ret;
> + }
> +
> + ret = uclass_get_device_by_of_offset(UCLASS_SYSCON, syscfg_phandle.node,
> + &syscon);
> + if (ret) {
> + error("unable to find syscon device (%d)\n", ret);
> + return ret;
> + }
> +
> + priv->regmap = syscon_get_regmap(syscon);
> + if (!priv->regmap) {
> + error("unable to find regmap\n");
> + return -ENODEV;
> + }
> +
> + /* get phy param offset */
> + count = fdtdec_get_int_array_count(gd->fdt_blob, dev->of_offset,
> + "st,syscfg", cells,
> + ARRAY_SIZE(cells));
> +
> + if (count < 0) {
> + error("Bad PHY st,syscfg property %d\n", count);
> + return -EINVAL;
> + }
> +
> + if (count > PHYPARAM_NB) {
> + error("Unsupported PHY param count %d\n", count);
> + return -EINVAL;
> + }
> +
> + priv->param = cells[PHYPARAM_REG];
> + priv->ctrl = cells[PHYCTRL_REG];
> +
> + /* get global reset control */
> + ret = reset_get_by_name(dev, "global", &priv->global_ctl);
> + if (ret) {
> + error("can't get global reset for %s (%d)", dev->name, ret);
> + return ret;
> + }
> +
> + /* get port reset control */
> + ret = reset_get_by_name(dev, "port", &priv->port_ctl);
> + if (ret) {
> + error("can't get port reset for %s (%d)", dev->name, ret);
> + return ret;
> + }
> +
> + sti_phy_usb_init(priv);
> +
> + return sti_phy_usb_deassert(priv);
> +}
> +
> +static const struct udevice_id sti_phy_usb_ids[] = {
> + { .compatible = "st,stih407-usb2-phy" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(sti_phy_usb) = {
> + .name = "sti_phy_usb",
> + .id = UCLASS_MISC,
> + .of_match = sti_phy_usb_ids,
> + .probe = sti_phy_usb_probe,
> + .priv_auto_alloc_size = sizeof(struct sti_phy_usb),
> +};
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list