[U-Boot] [PATCH 08/21] usb: ohci: Add STi ohci support

Marek Vasut marex at denx.de
Fri Mar 17 16:41:08 UTC 2017


On 03/17/2017 05:25 PM, patrice.chotard at st.com wrote:
> From: Patrice Chotard <patrice.chotard at st.com>
> 
> Add support for on-chip ohci controller available
> on STMicrolectronics SoCs.
> Ohci support will be then available on both type A
> USB 2.0 connectors.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
> ---
>  drivers/usb/host/Kconfig        |  9 +++++
>  drivers/usb/host/Makefile       |  1 +
>  drivers/usb/host/ohci-sti.c     | 90 +++++++++++++++++++++++++++++++++++++++++
>  include/configs/stih410-b2260.h |  3 ++
>  4 files changed, 103 insertions(+)
>  create mode 100644 drivers/usb/host/ohci-sti.c
> 
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index d66f49e..33ded5d 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -168,6 +168,15 @@ config USB_OHCI_GENERIC
>  	---help---
>  	  Enables support for generic OHCI controller.
>  
> +config USB_OHCI_STI
> +	bool "Support for STMicroelectronics OHCI USB controller"
> +	depends on ARCH_STI
> +	depends on OF_CONTROL
> +	depends on DM_USB
> +	select USB_HOST
> +	---help---
> +	  Enables support for the on-chip OHCI controller on STMicroelectronics SoCs.
> +
>  endif # USB_OHCI_HCD
>  
>  config USB_UHCI_HCD
> diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
> index 303aa32..b78e632 100644
> --- a/drivers/usb/host/Makefile
> +++ b/drivers/usb/host/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_USB_OHCI_EP93XX) += ohci-ep93xx.o
>  obj-$(CONFIG_USB_OHCI_SUNXI) += ohci-sunxi.o
>  obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o
>  obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o
> +obj-$(CONFIG_USB_OHCI_STI) += ohci-sti.o
>  
>  # echi
>  obj-$(CONFIG_USB_EHCI) += ehci-hcd.o
> diff --git a/drivers/usb/host/ohci-sti.c b/drivers/usb/host/ohci-sti.c
> new file mode 100644
> index 0000000..62b63cd
> --- /dev/null
> +++ b/drivers/usb/host/ohci-sti.c
> @@ -0,0 +1,90 @@
> +/*
> + * Copyright (c) 2017
> + * Patrice Chotard <patrice.chotard at st.com>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include "ohci.h"
> +#include <reset-uclass.h>
> +#include <usb.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#if !defined(CONFIG_USB_OHCI_NEW)
> +# error "Generic OHCI driver requires CONFIG_USB_OHCI_NEW"
> +#endif
> +
> +struct sti_ohci_priv {
> +	ohci_t ohci;
> +	struct reset_ctl power_ctl;
> +	struct reset_ctl softreset_ctl;
> +};
> +
> +static int ohci_usb_probe(struct udevice *dev)
> +{
> +	struct sti_ohci_priv *priv = dev_get_priv(dev);
> +	struct ohci_regs *regs;
> +	struct udevice *dev_phy;
> +	int ret, phy_node;
> +
> +	regs = (struct ohci_regs *)dev_get_addr(dev);
> +	if (regs == (void *)FDT_ADDR_T_NONE)
> +		return -EINVAL;
> +
> +	ret = reset_get_by_name(dev, "power", &priv->power_ctl);
> +	if (ret) {
> +		error("can't get power reset for %s (%d)", dev->name, ret);
> +		return ret;
> +	}
> +
> +	ret = reset_get_by_name(dev, "softreset", &priv->softreset_ctl);
> +	if (ret) {
> +		error("can't get soft reset for %s (%d)", dev->name, ret);
> +		return ret;
> +	}
> +
> +	ret = reset_deassert(&priv->power_ctl);
> +	if (ret < 0) {
> +		error("OHCI power reset deassert failed: %d", ret);
> +		return ret;
> +	}
> +
> +	ret = reset_deassert(&priv->softreset_ctl);
> +	if (ret < 0) {
> +		error("OHCI soft reset deassert failed: %d", ret);
> +		return ret;
> +	}
> +
> +	/* get phy node */
> +	phy_node = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset, "phys");
> +	if (phy_node <= 0) {
> +		error("Not found usb phy device\n");
> +		return -ENODEV;
> +	}
> +
> +	/* probe associated phy node */
> +	ret = uclass_get_device_by_of_offset(UCLASS_MISC, phy_node, &dev_phy);
> +
> +	return ohci_register(dev, regs);
> +}
> +
> +static const struct udevice_id sti_usb_ids[] = {
> +	{ .compatible = "st,st-ohci-300x" },
> +	{ }
> +};
> +
> +U_BOOT_DRIVER(ohci_sti) = {
> +	.name = "ohci_sti",
> +	.id = UCLASS_USB,
> +	.of_match = sti_usb_ids,
> +	.probe = ohci_usb_probe,
> +	.remove = ohci_deregister,
> +	.ops = &ohci_usb_ops,
> +	.priv_auto_alloc_size = sizeof(struct sti_ohci_priv),
> +	.flags = DM_FLAG_ALLOC_PRIV_DMA,
> +};
> diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h
> index 28e2f7f..4a5da82 100644
> --- a/include/configs/stih410-b2260.h
> +++ b/include/configs/stih410-b2260.h
> @@ -57,4 +57,7 @@
>  
>  #define CONFIG_SKIP_LOWLEVEL_INIT
>  
> +#define CONFIG_USB_OHCI_NEW
> +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2

Is this max_root_ports still needed ? :(

btw this board-thing should likely be split into separate patch

>  #endif /* __CONFIG_H */
> 


-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list