[U-Boot] [PATCH 3/3] mx7: Add 1.2GHz speed grade entry

[Stefano Babic]

On 22/02/2017 16:43, Fabio Estevam wrote:
> There are recent MX7 parts that have a 1.2GHz speed grade.
> 
> Add support for it.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> ---
>  arch/arm/cpu/armv7/mx7/soc.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/mx7/soc.c b/arch/arm/cpu/armv7/mx7/soc.c
> index 8cde77b..8422f24 100644
> --- a/arch/arm/cpu/armv7/mx7/soc.c
> +++ b/arch/arm/cpu/armv7/mx7/soc.c
> @@ -105,6 +105,7 @@ struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
>  #define OCOTP_TESTER3_SPEED_800MHZ	0
>  #define OCOTP_TESTER3_SPEED_500MHZ	1
>  #define OCOTP_TESTER3_SPEED_1GHZ	2
> +#define OCOTP_TESTER3_SPEED_1P2GHZ	3
>  
>  u32 get_cpu_speed_grade_hz(void)
>  {
> @@ -125,6 +126,8 @@ u32 get_cpu_speed_grade_hz(void)
>  		return 500000000;
>  	case OCOTP_TESTER3_SPEED_1GHZ:
>  		return 1000000000;
> +	case OCOTP_TESTER3_SPEED_1P2GHZ:
> +		return 1200000000;
>  	}
>  	return 0;
>  }
> 
Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================