[U-Boot] [PATCH] rockchip: spl: use spl_early_init() instead of spl_init()

[Heiko Stuebner]

Am Montag, 20. März 2017, 14:47:16 CET schrieb Kever Yang:
> Rockchip spl driver needs using spl_early_init().
> 
> Fixes: b3d2861e (spl: Remove overwrite of relocated malloc limit)
> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>

Reviewed-by: Heiko Stuebner <heiko at sntech.de>

on rk3188-radxarock
Tested-by: Heiko Stuebner <heiko at sntech.de>

> ---
> 
>  arch/arm/mach-rockchip/rk3188-board-spl.c | 4 ++--
>  arch/arm/mach-rockchip/rk3399-board-spl.c | 4 ++--
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-rockchip/rk3188-board-spl.c
> b/arch/arm/mach-rockchip/rk3188-board-spl.c index f93feae..117f6b8 100644
> --- a/arch/arm/mach-rockchip/rk3188-board-spl.c
> +++ b/arch/arm/mach-rockchip/rk3188-board-spl.c
> @@ -109,9 +109,9 @@ void board_init_f(ulong dummy)
>  	printch('\n');
>  #endif
> 
> -	ret = spl_init();
> +	ret = spl_early_init();
>  	if (ret) {
> -		debug("spl_init() failed: %d\n", ret);
> +		debug("spl_early_init() failed: %d\n", ret);
>  		hang();
>  	}
> 
> diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c
> b/arch/arm/mach-rockchip/rk3399-board-spl.c index 8ae3055..08aa0cb 100644
> --- a/arch/arm/mach-rockchip/rk3399-board-spl.c
> +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c
> @@ -96,9 +96,9 @@ void board_init_f(ulong dummy)
>  	/*  Emmc clock generator: disable the clock multipilier */
>  	rk_clrreg(GRF_EMMCCORE_CON11, 0x0ff);
> 
> -	ret = spl_init();
> +	ret = spl_early_init();
>  	if (ret) {
> -		debug("spl_init() failed: %d\n", ret);
> +		debug("spl_early_init() failed: %d\n", ret);
>  		hang();
>  	}