[U-Boot] [PATCH] mmc: xenon_sdhci: Add missing host->max_clk to Xenon SDHCI driver

[Stefan Roese]

The Xenon SDHCI driver just missed the integration of this patch:

git ID 6d0e34bf
mmc: sdhci: Distinguish between base clock and maximum peripheral frequency

With this patch applied, the SDHCI subsystem complains now with this warning
while probing:

sdhci_setup_cfg: Hardware doesn't specify base clock frequency

This patch fixes this issue, by providing the missing host->max_clk
variable to the SDHCI subsystem.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Hu Ziji <huziji at marvell.com>
Cc: Victor Gu <xigu at marvell.com>
Cc: Konstantin Porotchkin <kostap at marvell.com>
Cc: Nadav Haklai <nadavh at marvell.com>
Cc: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>
Cc: Jaehoon Chung <jh80.chung at samsung.com>
---
 drivers/mmc/xenon_sdhci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/xenon_sdhci.c b/drivers/mmc/xenon_sdhci.c
index f678110239..2a0d8b46c6 100644
--- a/drivers/mmc/xenon_sdhci.c
+++ b/drivers/mmc/xenon_sdhci.c
@@ -422,7 +422,8 @@ static int xenon_sdhci_probe(struct udevice *dev)
 
 	host->ops = &xenon_sdhci_ops;
 
-	ret = sdhci_setup_cfg(&plat->cfg, host, XENON_MMC_MAX_CLK, 0);
+	host->max_clk = XENON_MMC_MAX_CLK;
+	ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
 	if (ret)
 		return ret;
 
-- 
2.12.0