[U-Boot] [PATCH 2/2] cmd: nand: Make the NAND options default to NAND_SUNXI

[Jagan Teki]

On Tuesday 21 March 2017 12:22 AM, Maxime Ripard wrote:
> Hi,
>
> On Mon, Mar 13, 2017 at 12:37:36AM +0000, André Przywara wrote:
>> On 03/03/17 14:32, Maxime Ripard wrote:
>>> If we depend on the ARCH_SUNXI configuration option, the boards that do not
>>> have NAND support enabled (with the associated options) will not compile
>>> anymore.
>>>
>>> Depend on the NAND driver configuration option to make sure that is not the
>>> case.
>>
>>
>>> Reported-by: Chen-Yu Tsai <wens at csie.org>
>>> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
>>
>> As I came up with an identical patch today to fix sunxi/master:
>>
>> Reviewed-by: Andre Przywara <andre.przywara at arm.com>
>>
>>
>> So this situation is a bit unfortunate: The sunxi/master branch was
>> updated apparently before even compile-testing it for more than one
>> sunxi board (it is broken for every sunxi board except Chip Pro at the
>> moment: buildman says 105/106). And even after reports and the
>> corresponding fixes appeared (thanks Chen-Yu and Maxime!) the branch is
>> _still_ broken as of today (10 days after the fix was posted).
>>
>> So can we please have both
>> a) a better quality assurance before merging patches into this custodian
>> branch and
>> b) quicker merging of fixes?
>> To my understanding u-boot-sunxi should be always a good and working
>> candidate for anyone interested in Allwinner boards.
>>
>> For a) it would already help to just simply build test sunxi:
>> $ tools/buildman/buildman sunxi
>> but probably extend this to cover at least all ARM boards.
>
> Jagan usually takes the patches, but he seems to be off, and I was in
> holidays last week.

Sorry, I was off with holidays, will active and look for all.

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.