[U-Boot] [PATCH 17/18] stm32f7: add support for stm32f769 disco board
Vikas Manocha
vikas.manocha at st.com
Mon Mar 20 20:48:43 UTC 2017
This board support stm32f7 family device stm32f769-I with 2MB internal Flash &
512KB RAM.
STM32F769 lines offer the performance of the Cortex-M7 core (with double
precision floating point unit) running up to 216 MHz.
To compile for stm32f769 board, use same defconfig as stm32f746-disco,
the only difference is to pass "DEVICE_TREE=stm32f769-disco".
Signed-off-by: Vikas Manocha <vikas.manocha at st.com>
cc: Christophe KERELLO <christophe.kerello at st.com>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/stm32f769-disco.dts | 255 +++++++++++++++++++++++++++++++++++++++
2 files changed, 257 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/stm32f769-disco.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d00651c..5e27413 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -177,7 +177,8 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb
-dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb
+dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \
+ stm32f769-disco.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
diff --git a/arch/arm/dts/stm32f769-disco.dts b/arch/arm/dts/stm32f769-disco.dts
new file mode 100644
index 0000000..6591cc8
--- /dev/null
+++ b/arch/arm/dts/stm32f769-disco.dts
@@ -0,0 +1,255 @@
+/*
+ * Copyright 2016 - Vikas Manocha <vikas.manocha at st.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/memory/stm32-sdram.h>
+
+/ {
+ model = "STMicroelectronics STM32F769-DISCO board";
+ compatible = "st,stm32f769-disco", "st,stm32f7";
+
+ chosen {
+ bootargs = "root=/dev/ram rdinit=/linuxrc";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0xC0000000 0x1000000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ spi0 = &qspi;
+ /* Aliases for gpios so as to use sequence */
+ gpio0 = &gpioa;
+ gpio1 = &gpiob;
+ gpio2 = &gpioc;
+ gpio3 = &gpiod;
+ gpio4 = &gpioe;
+ gpio5 = &gpiof;
+ gpio6 = &gpiog;
+ gpio7 = &gpioh;
+ gpio8 = &gpioi;
+ gpio9 = &gpioj;
+ gpio10 = &gpiok;
+ };
+
+ led1 {
+ compatible = "st,led1";
+ led-gpio = <&gpioj 5 0>;
+ };
+
+ button1 {
+ compatible = "st,button1";
+ button-gpio = <&gpioa 0 0>;
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&pinctrl {
+ usart1_pins_a: usart1 at 0 {
+ pins1 {
+ pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+ bias-disable;
+ };
+ };
+
+ ethernet_mii: mii at 0 {
+ pins {
+ pinmux = <STM32F746_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>,
+ <STM32F746_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>,
+ <STM32F746_PG11_FUNC_ETH_MII_TX_EN_ETH_RMII_TX_EN>,
+ <STM32F746_PA2_FUNC_ETH_MDIO>,
+ <STM32F746_PC1_FUNC_ETH_MDC>,
+ <STM32F746_PA1_FUNC_ETH_MII_RX_CLK_ETH_RMII_REF_CLK>,
+ <STM32F746_PA7_FUNC_ETH_MII_RX_DV_ETH_RMII_CRS_DV>,
+ <STM32F746_PC4_FUNC_ETH_MII_RXD0_ETH_RMII_RXD0>,
+ <STM32F746_PC5_FUNC_ETH_MII_RXD1_ETH_RMII_RXD1>;
+ slew-rate = <2>;
+ };
+ };
+
+ qspi_pins: qspi at 0 {
+ pins {
+ pinmux = <STM32F746_PB2_FUNC_QUADSPI_CLK>,
+ <STM32F746_PB6_FUNC_QUADSPI_BK1_NCS>,
+ <STM32F746_PC9_FUNC_QUADSPI_BK1_IO0>,
+ <STM32F746_PC10_FUNC_QUADSPI_BK1_IO1>,
+ <STM32F746_PD13_FUNC_QUADSPI_BK1_IO3>,
+ <STM32F746_PE2_FUNC_QUADSPI_BK1_IO2>;
+ slew-rate = <2>;
+ };
+ };
+
+ fmc_pins: fmc at 0 {
+ pins {
+ pinmux = <STM32F746_PI10_FUNC_FMC_D31>,
+ <STM32F746_PI9_FUNC_FMC_D30>,
+ <STM32F746_PI7_FUNC_FMC_D29>,
+ <STM32F746_PI6_FUNC_FMC_D28>,
+ <STM32F746_PI3_FUNC_FMC_D27>,
+ <STM32F746_PI2_FUNC_FMC_D26>,
+ <STM32F746_PI1_FUNC_FMC_D25>,
+ <STM32F746_PI0_FUNC_FMC_D24>,
+ <STM32F746_PH15_FUNC_FMC_D23>,
+ <STM32F746_PH14_FUNC_FMC_D22>,
+ <STM32F746_PH13_FUNC_FMC_D21>,
+ <STM32F746_PH12_FUNC_FMC_D20>,
+ <STM32F746_PH11_FUNC_FMC_D19>,
+ <STM32F746_PH10_FUNC_FMC_D18>,
+ <STM32F746_PH9_FUNC_FMC_D17>,
+ <STM32F746_PH8_FUNC_FMC_D16>,
+
+ <STM32F746_PD10_FUNC_FMC_D15>,
+ <STM32F746_PD9_FUNC_FMC_D14>,
+ <STM32F746_PD8_FUNC_FMC_D13>,
+ <STM32F746_PE15_FUNC_FMC_D12>,
+ <STM32F746_PE14_FUNC_FMC_D11>,
+ <STM32F746_PE13_FUNC_FMC_D10>,
+ <STM32F746_PE12_FUNC_FMC_D9>,
+ <STM32F746_PE11_FUNC_FMC_D8>,
+ <STM32F746_PE10_FUNC_FMC_D7>,
+ <STM32F746_PE9_FUNC_FMC_D6>,
+ <STM32F746_PE8_FUNC_FMC_D5>,
+ <STM32F746_PE7_FUNC_FMC_D4>,
+ <STM32F746_PD1_FUNC_FMC_D3>,
+ <STM32F746_PD0_FUNC_FMC_D2>,
+ <STM32F746_PD15_FUNC_FMC_D1>,
+ <STM32F746_PD14_FUNC_FMC_D0>,
+
+ <STM32F746_PI5_FUNC_FMC_NBL3>,
+ <STM32F746_PI4_FUNC_FMC_NBL2>,
+ <STM32F746_PE1_FUNC_FMC_NBL1>,
+ <STM32F746_PE0_FUNC_FMC_NBL0>,
+
+ <STM32F746_PG5_FUNC_FMC_A15_FMC_BA1>,
+ <STM32F746_PG4_FUNC_FMC_A14_FMC_BA0>,
+
+ <STM32F746_PG1_FUNC_FMC_A11>,
+ <STM32F746_PG0_FUNC_FMC_A10>,
+ <STM32F746_PF15_FUNC_FMC_A9>,
+ <STM32F746_PF14_FUNC_FMC_A8>,
+ <STM32F746_PF13_FUNC_FMC_A7>,
+ <STM32F746_PF12_FUNC_FMC_A6>,
+ <STM32F746_PF5_FUNC_FMC_A5>,
+ <STM32F746_PF4_FUNC_FMC_A4>,
+ <STM32F746_PF3_FUNC_FMC_A3>,
+ <STM32F746_PF2_FUNC_FMC_A2>,
+ <STM32F746_PF1_FUNC_FMC_A1>,
+ <STM32F746_PF0_FUNC_FMC_A0>,
+
+ <STM32F746_PH3_FUNC_FMC_SDNE0>,
+ <STM32F746_PH5_FUNC_FMC_SDNWE>,
+ <STM32F746_PF11_FUNC_FMC_SDNRAS>,
+ <STM32F746_PG15_FUNC_FMC_SDNCAS>,
+ <STM32F746_PH2_FUNC_FMC_SDCKE0>,
+ <STM32F746_PG8_FUNC_FMC_SDCLK>;
+ slew-rate = <2>;
+ };
+ };
+};
+
+&usart1 {
+ pinctrl-0 = <&usart1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&fmc {
+ pinctrl-0 = <&fmc_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mr-nbanks = <1>;
+ /* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */
+ bank1: bank at 0 {
+ st,sdram-control = /bits/ 8 <NO_COL_8 NO_ROW_12 MWIDTH_32 BANKS_4
+ CAS_3 SDCLK_2 RD_BURST_EN
+ RD_PIPE_DL_0>;
+ st,sdram-timing = /bits/ 8 <TMRD_2 TXSR_6 TRAS_4 TRC_6 TWR_2
+ TRP_2 TRCD_2>;
+ /* refcount = (64msec/total_row_sdram)*freq - 20 */
+ st,sdram-refcount = < 1542 >;
+ };
+};
+
+&mac {
+ status = "okay";
+ pinctrl-0 = <ðernet_mii>;
+ phy-mode = "rmii";
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ };
+};
+
+&qspi {
+ pinctrl-0 = <&qspi_pins>;
+ status = "okay";
+
+ qflash0: n25q128a {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q128a13", "spi-flash";
+ spi-max-frequency = <108000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <1>;
+ memory-map = <0x90000000 0x1000000>;
+ reg = <0>;
+ };
+};
--
1.9.1
More information about the U-Boot
mailing list