[U-Boot] [PATCH] drivers/net/phy: add fixed-phy / fixed-link support
Christian Gmeiner
christian.gmeiner at gmail.com
Tue Mar 21 08:32:51 UTC 2017
Hi Hannes
2017-02-21 9:34 GMT+01:00 Hannes Schmelzer <hannes.schmelzer at br-automation.com>:
> This patch adds support for having a "fixed-link" to some other MAC
> (like some embedded switch-device).
>
I really looking forward that u-boot gains support for fixed-links.
> For this purpose we introduce a new phy-driver, called "Fixed PHY".
>
> Fixed PHY works only with CONFIG_DM_ETH enabled, since the fixed-link is
> described with a subnode below ethernet interface.
>
> Most ethernet drivers (unfortunately not all are following same scheme
> for searching/attaching phys) are calling "phy_connect(...)" for getting
> a phy-device.
> At this point we link in, we search here for a subnode called "fixed-
> link", once found we start phy_device_create(...) with the special phy-
> id PHY_FIXED_ID (0xa5a55a5a).
>
> During init the "Fixed PHY" driver has registered with this id and now
> gets probed, during probe we get all the details about fixed-link out of
> dts, later on the phy reports this values.
>
> Signed-off-by: Hannes Schmelzer <hannes.schmelzer at br-automation.com>
>
> ---
>
> drivers/net/phy/Makefile | 1 +
> drivers/net/phy/fixed.c | 86 ++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/net/phy/phy.c | 23 +++++++++++--
> include/phy.h | 3 ++
> 4 files changed, 110 insertions(+), 3 deletions(-)
> create mode 100644 drivers/net/phy/fixed.c
>
> diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
> index d372971..88c00a5 100644
> --- a/drivers/net/phy/Makefile
> +++ b/drivers/net/phy/Makefile
> @@ -28,3 +28,4 @@ obj-$(CONFIG_PHY_TI) += ti.o
> obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o
> obj-$(CONFIG_PHY_VITESSE) += vitesse.o
> obj-$(CONFIG_PHY_MSCC) += mscc.o
> +obj-$(CONFIG_PHY_FIXED) += fixed.o
> diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
> new file mode 100644
> index 0000000..fc86a3f
> --- /dev/null
> +++ b/drivers/net/phy/fixed.c
> @@ -0,0 +1,86 @@
> +/*
> + * Fixed-Link phy
> + *
> + * Copyright 2017 Bernecker & Rainer Industrieelektronik GmbH
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <config.h>
> +#include <common.h>
> +#include <phy.h>
> +#include <dm.h>
> +#include <fdt_support.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int fixedphy_probe(struct phy_device *phydev)
> +{
> + struct fixed_link *priv;
> + int ofnode = phydev->addr;
> + u32 val;
> +
> + debug("%s: start.\n", __func__);
Do we really need this debug(..) here?
> + /* check for mandatory properties within fixed-link node */
> + val = fdt_getprop_u32_default_node(gd->fdt_blob,
> + ofnode, 0, "speed", ~0UL);
> + if (val == ~0UL ||
> + (val != SPEED_10 && val != SPEED_1000 && val != SPEED_1000)) {
Maybe you wanted to write something like:
(val != SPEED_10 && val != SPEED_100 && val != SPEED_1000)) {
> + printf("ERROR: no/invalid speed given in fixed-link node!");
> + return -1;
> + }
> +
> + priv = malloc(sizeof(*priv));
> + if (!priv)
> + return -ENOMEM;
> + memset(priv, 0, sizeof(*priv));
> +
> + phydev->priv = priv;
> + phydev->addr = 0;
> +
> + priv->link_speed = val;
> + priv->duplex = fdtdec_get_bool(gd->fdt_blob, ofnode, "full-duplex");
> + priv->pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "pause");
> + priv->asym_pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "asym-pause");
> +
> + /* set this for preventing stack doing some unary reset */
> + phydev->flags |= PHY_FLAG_BROKEN_RESET;
> +
> + return 0;
> +}
> +
> +int fixedphy_startup(struct phy_device *phydev)
> +{
> + struct fixed_link *priv = phydev->priv;
> +
> + debug("%s: start.\n", __func__);
> +
Do we really need this debug(..) here?
> + phydev->asym_pause = priv->asym_pause;
> + phydev->pause = priv->pause;
> + phydev->duplex = priv->duplex;
> + phydev->speed = priv->link_speed;
> + phydev->link = 1;
> +
> + return 0;
> +}
> +
> +int fixedphy_shutdown(struct phy_device *phydev)
> +{
> + return 0;
> +}
> +
> +static struct phy_driver fixedphy_driver = {
> + .uid = PHY_FIXED_ID,
> + .mask = 0xffffffff,
> + .name = "Fixed PHY",
> + .features = PHY_GBIT_FEATURES | SUPPORTED_MII,
> + .probe = fixedphy_probe,
> + .startup = fixedphy_startup,
> + .shutdown = fixedphy_shutdown,
> +};
> +
> +int phy_fixed_init(void)
> +{
> + phy_register(&fixedphy_driver);
> + return 0;
> +}
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 8db6574..a569d0b 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -515,7 +515,9 @@ int phy_init(void)
> #ifdef CONFIG_PHY_MSCC
> phy_mscc_init();
> #endif
> -
> +#ifdef CONFIG_PHY_FIXED
> + phy_fixed_init();
> +#endif
> return 0;
> }
>
> @@ -854,9 +856,24 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
> struct eth_device *dev, phy_interface_t interface)
> #endif
> {
> - struct phy_device *phydev;
> + struct phy_device *phydev = NULL;
> +#if defined(CONFIG_DM_ETH) && defined(CONFIG_PHY_FIXED)
> + int sn;
> + const char *name;
> + sn = fdt_first_subnode(gd->fdt_blob, dev->of_offset);
> + while (sn > 0) {
> + name = fdt_get_name(gd->fdt_blob, sn, NULL);
> + if (name != NULL && strcmp(name, "fixed-link") == 0) {
> + phydev = phy_device_create(bus,
> + sn, PHY_FIXED_ID, interface);
> + break;
> + }
> + sn = fdt_next_subnode(gd->fdt_blob, sn);
> + }
> +#endif
> + if (phydev == NULL)
> + phydev = phy_find_by_mask(bus, 1 << addr, interface);
>
> - phydev = phy_find_by_mask(bus, 1 << addr, interface);
> if (phydev)
> phy_connect_dev(phydev, dev);
> else
> diff --git a/include/phy.h b/include/phy.h
> index 5477496..f5fdc04 100644
> --- a/include/phy.h
> +++ b/include/phy.h
> @@ -15,6 +15,8 @@
> #include <linux/ethtool.h>
> #include <linux/mdio.h>
>
> +#define PHY_FIXED_ID 0xa5a55a5a
> +
> #define PHY_MAX_ADDR 32
>
> #define PHY_FLAG_BROKEN_RESET (1 << 0) /* soft reset not supported */
> @@ -267,6 +269,7 @@ int phy_ti_init(void);
> int phy_vitesse_init(void);
> int phy_xilinx_init(void);
> int phy_mscc_init(void);
> +int phy_fixed_init(void);
>
> int board_phy_config(struct phy_device *phydev);
> int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
> --
> 1.9.1
greets
--
Christian Gmeiner, MSc
https://www.youtube.com/user/AloryOFFICIAL
https://soundcloud.com/christian-gmeiner
More information about the U-Boot
mailing list