[U-Boot] [PATCH v2] drivers/net/phy: add fixed-phy / fixed-link support
Hannes Schmelzer
oe5hpm at oevsv.at
Tue Mar 21 09:30:50 UTC 2017
From: Hannes Schmelzer <hannes.schmelzer at br-automation.com>
This patch adds support for having a "fixed-link" to some other MAC
(like some embedded switch-device).
For this purpose we introduce a new phy-driver, called "Fixed PHY".
Fixed PHY works only with CONFIG_DM_ETH enabled, since the fixed-link is
described with a subnode below ethernet interface.
Most ethernet drivers (unfortunately not all are following same scheme
for searching/attaching phys) are calling "phy_connect(...)" for getting
a phy-device.
At this point we link in, we search here for a subnode called "fixed-
link", once found we start phy_device_create(...) with the special phy-
id PHY_FIXED_ID (0xa5a55a5a).
During init the "Fixed PHY" driver has registered with this id and now
gets probed, during probe we get all the details about fixed-link out of
dts, later on the phy reports this values.
Signed-off-by: Hannes Schmelzer <hannes.schmelzer at br-automation.com>
Signed-off-by: Hannes Schmelzer <oe5hpm at oevsv.at>
---
Changes in v2:
- drop unary debug prints
- simplify 'speed-property' check
- make fixed-phy selectable trough Kconfig
- add doc/device-tree-bindings/net/fixed-link.txt from linux kernel
doc/device-tree-bindings/net/fixed-link.txt | 30 +++++++++++
drivers/net/phy/Kconfig | 9 ++++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/fixed.c | 82 +++++++++++++++++++++++++++++
drivers/net/phy/phy.c | 23 ++++++--
include/phy.h | 3 ++
6 files changed, 145 insertions(+), 3 deletions(-)
create mode 100644 doc/device-tree-bindings/net/fixed-link.txt
create mode 100644 drivers/net/phy/fixed.c
diff --git a/doc/device-tree-bindings/net/fixed-link.txt b/doc/device-tree-bindings/net/fixed-link.txt
new file mode 100644
index 0000000..5829bd8
--- /dev/null
+++ b/doc/device-tree-bindings/net/fixed-link.txt
@@ -0,0 +1,30 @@
+Fixed link Device Tree binding
+------------------------------
+
+Some Ethernet MACs have a "fixed link", and are not connected to a
+normal MDIO-managed PHY device. For those situations, a Device Tree
+binding allows to describe a "fixed link".
+
+Such a fixed link situation is described by creating a 'fixed-link'
+sub-node of the Ethernet MAC device node, with the following
+properties:
+
+* 'speed' (integer, mandatory), to indicate the link speed. Accepted
+ values are 10, 100 and 1000
+* 'full-duplex' (boolean, optional), to indicate that full duplex is
+ used. When absent, half duplex is assumed.
+* 'pause' (boolean, optional), to indicate that pause should be
+ enabled.
+* 'asym-pause' (boolean, optional), to indicate that asym_pause should
+ be enabled.
+
+Examples:
+
+ethernet at 0 {
+ ...
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ ...
+};
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1d514e9..6a4a940 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -90,4 +90,13 @@ config PHY_VITESSE
config PHY_XILINX
bool "Xilinx Ethernet PHYs support"
+config PHY_FIXED
+ bool "Fixed-Link PHY"
+ help
+ Fixed PHY is used for having a 'fixed-link' to another MAC with a direct
+ connection (MII, RGMII, ...).
+ There is nothing like autoneogation and so
+ on, the link is always up with fixed speed and fixed duplex-setting.
+ More information: doc/device-tree-bindings/net/fixed-link.txt
+
endif #PHYLIB
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index d372971..88c00a5 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_PHY_TI) += ti.o
obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o
obj-$(CONFIG_PHY_VITESSE) += vitesse.o
obj-$(CONFIG_PHY_MSCC) += mscc.o
+obj-$(CONFIG_PHY_FIXED) += fixed.o
diff --git a/drivers/net/phy/fixed.c b/drivers/net/phy/fixed.c
new file mode 100644
index 0000000..2f4bb7a
--- /dev/null
+++ b/drivers/net/phy/fixed.c
@@ -0,0 +1,82 @@
+/*
+ * Fixed-Link phy
+ *
+ * Copyright 2017 Bernecker & Rainer Industrieelektronik GmbH
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <phy.h>
+#include <dm.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int fixedphy_probe(struct phy_device *phydev)
+{
+ struct fixed_link *priv;
+ int ofnode = phydev->addr;
+ u32 val;
+
+ /* check for mandatory properties within fixed-link node */
+ val = fdt_getprop_u32_default_node(gd->fdt_blob,
+ ofnode, 0, "speed", ~0UL);
+ if (val != SPEED_10 && val != SPEED_1000 && val != SPEED_1000) {
+ printf("ERROR: no/invalid speed given in fixed-link node!");
+ return -1;
+ }
+
+ priv = malloc(sizeof(*priv));
+ if (!priv)
+ return -ENOMEM;
+ memset(priv, 0, sizeof(*priv));
+
+ phydev->priv = priv;
+ phydev->addr = 0;
+
+ priv->link_speed = val;
+ priv->duplex = fdtdec_get_bool(gd->fdt_blob, ofnode, "full-duplex");
+ priv->pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "pause");
+ priv->asym_pause = fdtdec_get_bool(gd->fdt_blob, ofnode, "asym-pause");
+
+ /* set this for preventing stack doing some unary reset */
+ phydev->flags |= PHY_FLAG_BROKEN_RESET;
+
+ return 0;
+}
+
+int fixedphy_startup(struct phy_device *phydev)
+{
+ struct fixed_link *priv = phydev->priv;
+
+ phydev->asym_pause = priv->asym_pause;
+ phydev->pause = priv->pause;
+ phydev->duplex = priv->duplex;
+ phydev->speed = priv->link_speed;
+ phydev->link = 1;
+
+ return 0;
+}
+
+int fixedphy_shutdown(struct phy_device *phydev)
+{
+ return 0;
+}
+
+static struct phy_driver fixedphy_driver = {
+ .uid = PHY_FIXED_ID,
+ .mask = 0xffffffff,
+ .name = "Fixed PHY",
+ .features = PHY_GBIT_FEATURES | SUPPORTED_MII,
+ .probe = fixedphy_probe,
+ .startup = fixedphy_startup,
+ .shutdown = fixedphy_shutdown,
+};
+
+int phy_fixed_init(void)
+{
+ phy_register(&fixedphy_driver);
+ return 0;
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 8db6574..a569d0b 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -515,7 +515,9 @@ int phy_init(void)
#ifdef CONFIG_PHY_MSCC
phy_mscc_init();
#endif
-
+#ifdef CONFIG_PHY_FIXED
+ phy_fixed_init();
+#endif
return 0;
}
@@ -854,9 +856,24 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
struct eth_device *dev, phy_interface_t interface)
#endif
{
- struct phy_device *phydev;
+ struct phy_device *phydev = NULL;
+#if defined(CONFIG_DM_ETH) && defined(CONFIG_PHY_FIXED)
+ int sn;
+ const char *name;
+ sn = fdt_first_subnode(gd->fdt_blob, dev->of_offset);
+ while (sn > 0) {
+ name = fdt_get_name(gd->fdt_blob, sn, NULL);
+ if (name != NULL && strcmp(name, "fixed-link") == 0) {
+ phydev = phy_device_create(bus,
+ sn, PHY_FIXED_ID, interface);
+ break;
+ }
+ sn = fdt_next_subnode(gd->fdt_blob, sn);
+ }
+#endif
+ if (phydev == NULL)
+ phydev = phy_find_by_mask(bus, 1 << addr, interface);
- phydev = phy_find_by_mask(bus, 1 << addr, interface);
if (phydev)
phy_connect_dev(phydev, dev);
else
diff --git a/include/phy.h b/include/phy.h
index 5477496..f5fdc04 100644
--- a/include/phy.h
+++ b/include/phy.h
@@ -15,6 +15,8 @@
#include <linux/ethtool.h>
#include <linux/mdio.h>
+#define PHY_FIXED_ID 0xa5a55a5a
+
#define PHY_MAX_ADDR 32
#define PHY_FLAG_BROKEN_RESET (1 << 0) /* soft reset not supported */
@@ -267,6 +269,7 @@ int phy_ti_init(void);
int phy_vitesse_init(void);
int phy_xilinx_init(void);
int phy_mscc_init(void);
+int phy_fixed_init(void);
int board_phy_config(struct phy_device *phydev);
int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id);
--
2.7.4
More information about the U-Boot
mailing list