[U-Boot] [PATCH v2 07/14] usb: ohci: Add STi ohci support

[patrice.chotard at st.com]

From: Patrice Chotard <patrice.chotard at st.com>

Add support for on-chip ohci controller available
on STMicrolectronics SoCs.
Ohci support will be then available on both type A
USB 2.0 connectors.

Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---

v2:	_ put board specific defines in a separate patch (patch 8)


 drivers/usb/host/Kconfig    |  9 +++++
 drivers/usb/host/Makefile   |  1 +
 drivers/usb/host/ohci-sti.c | 90 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 100 insertions(+)
 create mode 100644 drivers/usb/host/ohci-sti.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index d66f49e..33ded5d 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -168,6 +168,15 @@ config USB_OHCI_GENERIC
 	---help---
 	  Enables support for generic OHCI controller.
 
+config USB_OHCI_STI
+	bool "Support for STMicroelectronics OHCI USB controller"
+	depends on ARCH_STI
+	depends on OF_CONTROL
+	depends on DM_USB
+	select USB_HOST
+	---help---
+	  Enables support for the on-chip OHCI controller on STMicroelectronics SoCs.
+
 endif # USB_OHCI_HCD
 
 config USB_UHCI_HCD
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 303aa32..b78e632 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_USB_OHCI_EP93XX) += ohci-ep93xx.o
 obj-$(CONFIG_USB_OHCI_SUNXI) += ohci-sunxi.o
 obj-$(CONFIG_USB_OHCI_LPC32XX) += ohci-lpc32xx.o
 obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o
+obj-$(CONFIG_USB_OHCI_STI) += ohci-sti.o
 
 # echi
 obj-$(CONFIG_USB_EHCI) += ehci-hcd.o
diff --git a/drivers/usb/host/ohci-sti.c b/drivers/usb/host/ohci-sti.c
new file mode 100644
index 0000000..62b63cd
--- /dev/null
+++ b/drivers/usb/host/ohci-sti.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2017
+ * Patrice Chotard <patrice.chotard at st.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <dm.h>
+#include <errno.h>
+#include "ohci.h"
+#include <reset-uclass.h>
+#include <usb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_USB_OHCI_NEW)
+# error "Generic OHCI driver requires CONFIG_USB_OHCI_NEW"
+#endif
+
+struct sti_ohci_priv {
+	ohci_t ohci;
+	struct reset_ctl power_ctl;
+	struct reset_ctl softreset_ctl;
+};
+
+static int ohci_usb_probe(struct udevice *dev)
+{
+	struct sti_ohci_priv *priv = dev_get_priv(dev);
+	struct ohci_regs *regs;
+	struct udevice *dev_phy;
+	int ret, phy_node;
+
+	regs = (struct ohci_regs *)dev_get_addr(dev);
+	if (regs == (void *)FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	ret = reset_get_by_name(dev, "power", &priv->power_ctl);
+	if (ret) {
+		error("can't get power reset for %s (%d)", dev->name, ret);
+		return ret;
+	}
+
+	ret = reset_get_by_name(dev, "softreset", &priv->softreset_ctl);
+	if (ret) {
+		error("can't get soft reset for %s (%d)", dev->name, ret);
+		return ret;
+	}
+
+	ret = reset_deassert(&priv->power_ctl);
+	if (ret < 0) {
+		error("OHCI power reset deassert failed: %d", ret);
+		return ret;
+	}
+
+	ret = reset_deassert(&priv->softreset_ctl);
+	if (ret < 0) {
+		error("OHCI soft reset deassert failed: %d", ret);
+		return ret;
+	}
+
+	/* get phy node */
+	phy_node = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset, "phys");
+	if (phy_node <= 0) {
+		error("Not found usb phy device\n");
+		return -ENODEV;
+	}
+
+	/* probe associated phy node */
+	ret = uclass_get_device_by_of_offset(UCLASS_MISC, phy_node, &dev_phy);
+
+	return ohci_register(dev, regs);
+}
+
+static const struct udevice_id sti_usb_ids[] = {
+	{ .compatible = "st,st-ohci-300x" },
+	{ }
+};
+
+U_BOOT_DRIVER(ohci_sti) = {
+	.name = "ohci_sti",
+	.id = UCLASS_USB,
+	.of_match = sti_usb_ids,
+	.probe = ohci_usb_probe,
+	.remove = ohci_deregister,
+	.ops = &ohci_usb_ops,
+	.priv_auto_alloc_size = sizeof(struct sti_ohci_priv),
+	.flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
-- 
1.9.1