[U-Boot] [PATCH v3 1/2] ARM: at91: gpio: fix at91_set_gpio_value() define

[Wenyou Yang]

When the CONFIG_ATMEL_LEGACY is undefined, according to the following
defines, at91_set_gpio_value() references to at91_set_pio_value(x, y)
with two parameters.
 #define at91_set_gpio_value(x, y)      at91_set_pio_value(x, y)
 #define at91_get_gpio_value(x)         at91_get_pio_value(x)

But there isn't the implementation of at91_set_pio_value(x, y) with
two parameters in U-Boot. This is an error.

Same as at91_get_gpio_value(x) define.

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
---

Changes in v3: None
Changes in v2:
 - Improve the commit log.

 arch/arm/mach-at91/include/mach/gpio.h | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 5a32bdba8d..df0f71975a 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -223,15 +223,13 @@ static inline unsigned pin_to_mask(unsigned pin)
 	at91_set_pio_output((x - PIN_BASE) / 32,(x % 32), y)
 #define at91_set_gpio_input(x, y) \
 	at91_set_pio_input((x - PIN_BASE) / 32,(x % 32), y)
-#define at91_set_gpio_value(x, y) \
-	at91_set_pio_value((x - PIN_BASE) / 32,(x % 32), y)
-#define at91_get_gpio_value(x) \
-	at91_get_pio_value((x - PIN_BASE) / 32,(x % 32))
-#else
-#define at91_set_gpio_value(x, y)	at91_set_pio_value(x, y)
-#define at91_get_gpio_value(x)		at91_get_pio_value(x)
 #endif
 
+#define at91_set_gpio_value(x, y) \
+	at91_set_pio_value((x / 32), (x % 32), y)
+#define at91_get_gpio_value(x)	\
+	at91_get_pio_value((x / 32), (x % 32))
+
 #define GPIO_PIOA_BASE  (0)
 #define GPIO_PIOB_BASE  (GPIO_PIOA_BASE + 32)
 #define GPIO_PIOC_BASE  (GPIO_PIOB_BASE + 32)
-- 
2.11.0