[U-Boot] [PATCH v2 17/20] arm: socfpga: Convert Altera ddr driver to use Kconfig

Marek Vasut marex at denx.de
Thu Mar 23 07:39:49 UTC 2017


On 03/23/2017 06:36 AM, Ley Foon Tan wrote:
> On Wed, Mar 22, 2017 at 10:26 PM, Marek Vasut <marex at denx.de> wrote:
>> On 03/22/2017 10:45 AM, Ley Foon Tan wrote:
>>> On Fri, Mar 10, 2017 at 9:53 AM, Marek Vasut <marex at denx.de> wrote:
>>>> On 03/09/2017 01:26 AM, Ley Foon Tan wrote:
>>>>> Convert Altera ddr driver to use Kconfig method. Enable ALTERA_SDRAM
>>>>> by default if it is on Gen5 target. Arria 10 will have different driver.
>>>>>
>>>>> Signed-off-by: Tien Fong Chee <tien.fong.chee at intel.com>
>>>>> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
>>>>> ---
>>>>>  drivers/Kconfig                  | 2 ++
>>>>>  drivers/ddr/Kconfig              | 1 +
>>>>>  drivers/ddr/altera/Kconfig       | 6 ++++++
>>>>>  include/configs/socfpga_common.h | 5 -----
>>>>>  4 files changed, 9 insertions(+), 5 deletions(-)
>>>>>  create mode 100644 drivers/ddr/Kconfig
>>>>>  create mode 100644 drivers/ddr/altera/Kconfig
>>>>>
>>>>> diff --git a/drivers/Kconfig b/drivers/Kconfig
>>>>> index 0e5d97d..3e6bbac 100644
>>>>> --- a/drivers/Kconfig
>>>>> +++ b/drivers/Kconfig
>>>>> @@ -14,6 +14,8 @@ source "drivers/cpu/Kconfig"
>>>>>
>>>>>  source "drivers/crypto/Kconfig"
>>>>>
>>>>> +source "drivers/ddr/Kconfig"
>>>>> +
>>>>>  source "drivers/demo/Kconfig"
>>>>>
>>>>>  source "drivers/ddr/fsl/Kconfig"
>>>>> diff --git a/drivers/ddr/Kconfig b/drivers/ddr/Kconfig
>>>>> new file mode 100644
>>>>> index 0000000..b764add
>>>>> --- /dev/null
>>>>> +++ b/drivers/ddr/Kconfig
>>>>> @@ -0,0 +1 @@
>>>>> +source "drivers/ddr/altera/Kconfig"
>>>>> diff --git a/drivers/ddr/altera/Kconfig b/drivers/ddr/altera/Kconfig
>>>>> new file mode 100644
>>>>> index 0000000..9554da7
>>>>> --- /dev/null
>>>>> +++ b/drivers/ddr/altera/Kconfig
>>>>> @@ -0,0 +1,6 @@
>>>>> +config ALTERA_SDRAM
>>>>> +     bool "SoCFPGA SDRAM for Arria5/Cyclone5 devices"
>>>>
>>>> Does this controller even support SDRAM ? :)
>>> The existing DDR driver is for Gen5 only. We will have new DDR driver
>>> for Arria 10 in later patchset.
>>
>> I was asking about the SDRAM support in Gen5 controller though :)
> Yes, it support for double data rate 2 (DDR2), DDR3, and low-power
> DDR2 (LPDDR2) SDRAM.

Ah, so a misnomer . I'd prefer to have something like "SoCFPGA DRAM
controller ... or SoCFPGA DDR SDRAM controller" in the Kconfig option to
make it clear.

-- 
Best regards,
Marek Vasut


More information about the U-Boot mailing list