[U-Boot] [PATCH 2/3] rockchip: rk3188: Add Radxa Rock board

Heiko Stuebner heiko at sntech.de
Thu Mar 23 23:41:33 UTC 2017


The Rock is a RK3188 based single board computer by Radxa.
Currently it still relies on the proprietary DDR init and
cannot use the generic SPL, but at least is able to boot
a linux kernel and system up to a regular login prompt.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
Reviewed-by: Simon Glass <sjg at chromium.org>
Tested-by: Kever Yang <kever.yang at rock-chips.com>
---
 arch/arm/dts/Makefile                 |   1 +
 arch/arm/dts/rk3188-radxarock.dts     | 382 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-rockchip/rk3188/Kconfig |  11 +
 board/radxa/rock/Kconfig              |  15 ++
 board/radxa/rock/MAINTAINERS          |   6 +
 board/radxa/rock/Makefile             |   7 +
 board/radxa/rock/rock.c               |   7 +
 configs/rock_defconfig                |  58 ++++++
 include/configs/rock.h                |  30 +++
 9 files changed, 517 insertions(+)
 create mode 100644 arch/arm/dts/rk3188-radxarock.dts
 create mode 100644 board/radxa/rock/Kconfig
 create mode 100644 board/radxa/rock/MAINTAINERS
 create mode 100644 board/radxa/rock/Makefile
 create mode 100644 board/radxa/rock/rock.c
 create mode 100644 configs/rock_defconfig
 create mode 100644 include/configs/rock.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d00651c74c..8c726c3d10 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -29,6 +29,7 @@ dtb-$(CONFIG_EXYNOS5) += exynos5250-arndale.dtb \
 dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
 	rk3036-sdk.dtb \
+	rk3188-radxarock.dtb \
 	rk3288-firefly.dtb \
 	rk3288-veyron-jerry.dtb \
 	rk3288-veyron-mickey.dtb \
diff --git a/arch/arm/dts/rk3188-radxarock.dts b/arch/arm/dts/rk3188-radxarock.dts
new file mode 100644
index 0000000000..5f5b5e9a1f
--- /dev/null
+++ b/arch/arm/dts/rk3188-radxarock.dts
@@ -0,0 +1,382 @@
+/*
+ * Copyright (c) 2013 Heiko Stuebner <heiko at sntech.de>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+ or X11
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "rk3188.dtsi"
+
+/ {
+	model = "Radxa Rock";
+	compatible = "radxa,rock", "rockchip,rk3188";
+
+	chosen {
+/*		stdout-path = &uart2; */
+		stdout-path = "serial2:115200n8";
+	};
+
+	config {
+		u-boot,dm-pre-reloc;
+		u-boot,boot-led = "rock:red:power";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "GPIO Key Power";
+			linux,input-type = <1>;
+			wakeup-source;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		green {
+			label = "rock:green:user1";
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue {
+			label = "rock:blue:user2";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		sleep {
+			label = "rock:red:power";
+			gpios = <&gpio0 15 0>;
+			default-state = "off";
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,dai-link at 1 {  /* S/PDIF - S/PDIF */
+			cpu { sound-dai = <&spdif>; };
+			codec { sound-dai = <&spdif_out>; };
+		};
+	};
+
+	spdif_out: spdif-out {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	ir_recv: gpio-ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 10 1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_recv_pin>;
+	};
+
+	vcc_otg: usb-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_sd0: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "sdmmc-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 1 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
+
+	vcc_host: usb-host-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&host_vbus_drv>;
+		regulator-name = "host-pwr";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys: vsys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+};
+
+&dmc {
+	rockchip,pctl-timing = <0x12c 0xc8 0x1f4 0x1e 0x4e 0x4 0x69 0x6
+		0x3 0x0 0x6 0x5 0xc 0x10 0x6 0x4
+		0x4 0x5 0x4 0x200 0x3 0xa 0x40 0x0
+		0x1 0x5 0x5 0x3 0xc 0x1e 0x100 0x0
+		0x4 0x0>;
+	rockchip,phy-timing = <0x208c6690 0x690878 0x10022a00
+		0x220 0x40 0x0 0x0>;
+	rockchip,sdram-params = <0x24716310 0 2 300000000 3 9 0>;
+};
+
+&emac {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_arm>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	rtc at 51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		#clock-cells = <0>;
+		clock-output-names = "xin32k";
+	};
+
+	act8846: act8846 at 5a {
+		compatible = "active-semi,act8846";
+		reg = <0x5a>;
+		status = "okay";
+		system-power-controller;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&act8846_dvs0_ctl>;
+
+		vp1-supply = <&vsys>;
+		vp2-supply = <&vsys>;
+		vp3-supply = <&vsys>;
+		vp4-supply = <&vsys>;
+		inl1-supply = <&vcc_io>;
+		inl2-supply = <&vsys>;
+		inl3-supply = <&vsys>;
+
+		regulators {
+			vcc_ddr: REG1 {
+				regulator-name = "VCC_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vdd_log: REG2 {
+				regulator-name = "VDD_LOG";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_arm: REG3 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			vcc_io: REG4 {
+				regulator-name = "VCC_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_10: REG5 {
+				regulator-name = "VDD_10";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			vdd_hdmi: REG6 {
+				regulator-name = "VDD_HDMI";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vcc18: REG7 {
+				regulator-name = "VCC_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcca_33: REG8 {
+				regulator-name = "VCCA_33";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_rmii: REG9 {
+				regulator-name = "VCC_RMII";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccio_wl: REG10 {
+				regulator-name = "VCCIO_WL";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vcc_18: REG11 {
+				regulator-name = "VCC18_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc28: REG12 {
+				regulator-name = "VCC_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	num-slots = <1>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
+	vmmc-supply = <&vcc_sd0>;
+
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pinctrl {
+	pcfg_output_low: pcfg-output-low {
+		output-low;
+	};
+
+	act8846 {
+		act8846_dvs0_ctl: act8846-dvs0-ctl {
+			rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <RK_GPIO0 0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	lan8720a  {
+		phy_int: phy-int {
+			rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	ir-receiver {
+		ir_recv_pin: ir-recv-pin {
+			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		host_vbus_drv: host-vbus-drv {
+			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	u-boot,dm-spl;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&usb_host {
+	status = "okay";
+};
+
+&usb_otg {
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
diff --git a/arch/arm/mach-rockchip/rk3188/Kconfig b/arch/arm/mach-rockchip/rk3188/Kconfig
index b70d45cd62..d129fcda99 100644
--- a/arch/arm/mach-rockchip/rk3188/Kconfig
+++ b/arch/arm/mach-rockchip/rk3188/Kconfig
@@ -1,5 +1,14 @@
 if ROCKCHIP_RK3188
 
+config TARGET_ROCK
+	bool "Radxa Rock"
+	help
+	  Rock is a RK3188-based development board with 2 USB and 1 otg
+	  ports, HDMI, TV-out, micro-SD card, audio, WiFi  and 100MBit
+	  Ethernet, It also includes on-board nand and 1GB of SDRAM.
+	  Expansion connectors provide access to display pins, I2C, SPI,
+	  UART and GPIOs.
+
 config SYS_SOC
 	default "rockchip"
 
@@ -24,4 +33,6 @@ config TPL_LIBGENERIC_SUPPORT
 config TPL_SERIAL_SUPPORT
 	default y
 
+source "board/radxa/rock/Kconfig"
+
 endif
diff --git a/board/radxa/rock/Kconfig b/board/radxa/rock/Kconfig
new file mode 100644
index 0000000000..855b9b6954
--- /dev/null
+++ b/board/radxa/rock/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_ROCK
+
+config SYS_BOARD
+	default "rock"
+
+config SYS_VENDOR
+	default "radxa"
+
+config SYS_CONFIG_NAME
+	default "rock"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+
+endif
diff --git a/board/radxa/rock/MAINTAINERS b/board/radxa/rock/MAINTAINERS
new file mode 100644
index 0000000000..c5f59c0a6f
--- /dev/null
+++ b/board/radxa/rock/MAINTAINERS
@@ -0,0 +1,6 @@
+RADXA_ROCK
+M:	Heiko Stuebner <heiko at sntech.de>
+S:	Maintained
+F:	board/radxa/rock
+F:	include/configs/rock.h
+F:	configs/rock_defconfig
diff --git a/board/radxa/rock/Makefile b/board/radxa/rock/Makefile
new file mode 100644
index 0000000000..fe94b60c35
--- /dev/null
+++ b/board/radxa/rock/Makefile
@@ -0,0 +1,7 @@
+#
+# (C) Copyright 2015 Heiko Stuebner
+#
+# SPDX-License-Identifier:     GPL-2.0+
+#
+
+obj-y	+= rock.o
diff --git a/board/radxa/rock/rock.c b/board/radxa/rock/rock.c
new file mode 100644
index 0000000000..5119e95455
--- /dev/null
+++ b/board/radxa/rock/rock.c
@@ -0,0 +1,7 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
diff --git a/configs/rock_defconfig b/configs/rock_defconfig
new file mode 100644
index 0000000000..86048c8fd7
--- /dev/null
+++ b/configs/rock_defconfig
@@ -0,0 +1,58 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_ROCKCHIP_RK3188=y
+CONFIG_ROCKCHIP_SPL_BACK_TO_BROM=y
+CONFIG_TARGET_ROCK=y
+CONFIG_SPL_STACK_R_ADDR=0x60080000
+CONFIG_DEFAULT_DEVICE_TREE="rk3188-radxarock"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_I2C=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_OF_PLATDATA=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
+# CONFIG_SPL_SIMPLE_BUS is not set
+# CONFIG_SPL_MMC_SUPPORT is not set
+# CONFIG_SPL_USE_ARCH_MEMSET is not set
+# CONFIG_SPL_USE_ARCH_MEMCPY is not set
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_CLK=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_LED=y
+CONFIG_SYSRESET=y
+CONFIG_PINCTRL=y
+# CONFIG_SPL_PINCTRL_FULL is not set
+CONFIG_ROCKCHIP_RK3188_PINCTRL=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_RAM=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_BASE=0x20064000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_NS16550=y
+CONFIG_SYS_NS16550=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_ERRNO_STR=y
diff --git a/include/configs/rock.h b/include/configs/rock.h
new file mode 100644
index 0000000000..de5291cd05
--- /dev/null
+++ b/include/configs/rock.h
@@ -0,0 +1,30 @@
+/*
+ * (C) Copyright 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define ROCKCHIP_DEVICE_SETTINGS
+#include <configs/rk3188_common.h>
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 0
+
+#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
+/* SPL @ 32k for 34k
+ * u-boot directly after @ 68k for 400k or so
+ * ENV @ 992k
+ */
+#define CONFIG_ENV_OFFSET ((1024-32) * 1024)
+#else
+/* SPL @ 32k for ~36k
+ * ENV @ 96k
+ * u-boot @ 128K
+ */
+#define CONFIG_ENV_OFFSET (96 * 1024)
+#endif
+
+#endif
-- 
2.11.0



More information about the U-Boot mailing list