[U-Boot] [PATCH 3/3] arm: mvebu: theadorable: Add 'pcie' test command

[Stefan Roese]

On 10.03.2017 15:40, Stefan Roese wrote:
> This board specific command tests for the presence of a specified PCIe
> device (via vendor-ID and device-ID). If the device is not detected,
> this will get printed. If the device is detected, the board will get
> resetted so that an easy loop test can be done. The board will reboot
> until the PCIe device is not detected.
>
> Signed-off-by: Stefan Roese <sr at denx.de>

Applied to u-boot-marvell/master.

Thanks,
Stefan