[U-Boot] [PATCH 3/7] arm: omap-common: sata: prepare driver for DM conversion

[Jean-Jacques Hiblot]

From: Mugunthan V N <mugunthanvnm at ti.com>

Prepare sata driver for DM conversion by abstracting sata phy
init to seperate function.

Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot at ti.com>
---
 arch/arm/mach-omap2/sata.c | 13 +++++++++----
 include/sata.h             |  2 ++
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-omap2/sata.c b/arch/arm/mach-omap2/sata.c
index 217f1c9..dce432b 100644
--- a/arch/arm/mach-omap2/sata.c
+++ b/arch/arm/mach-omap2/sata.c
@@ -32,16 +32,21 @@ struct omap_pipe3 sata_phy = {
 	.dpll_map = dpll_map_sata,
 };
 
+int enable_sata_phy(void)
+{
+	sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
+
+	/* Power up the PHY */
+	return phy_pipe3_power_on(&sata_phy);
+}
+
 #ifndef CONFIG_DM_SCSI
 int init_sata(int dev)
 {
 	int ret;
 	u32 val;
 
-	sata_phy.power_reg = (void __iomem *)(*ctrl)->control_phy_power_sata;
-
-	/* Power up the PHY */
-	phy_pipe3_power_on(&sata_phy);
+	enable_sata_phy();
 
 	/* Enable SATA module, No Idle, No Standby */
 	val = TI_SATA_IDLE_NO | TI_SATA_STANDBY_NO;
diff --git a/include/sata.h b/include/sata.h
index d18cc9a..583b72d 100644
--- a/include/sata.h
+++ b/include/sata.h
@@ -18,4 +18,6 @@ int sata_port_status(int dev, int port);
 extern struct blk_desc sata_dev_desc[];
 #endif
 
+int enable_sata_phy(void);
+
 #endif
-- 
1.9.1