[U-Boot] [PATCH v3] net: Kconfig:make PHY_GIGE and individual Micrel PHYs selectable

[Philipp Tomsich]

This change migrate the following configuration options for Kconfig:
 * PHY_GIGE, indicates that a controller (with an appropriate PHY) is
   Gigabit capable and enables extra support in the miiutil for
   parsing the status of Gigabit PHYs
 * adds configuration options for Micrel KSZ9021 and KSZ9031 GbE PHYs,
   which previously had to enabled through a board-specific config file

Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>

---

Changes in v3:
- add a label to the PHY_GIGE option to make it selectable via menuconf
- automatically select PHY_GIGE when a KSZ9021 or KSZ9031 is selected
- fix indentations (convert spaces to tabs)
- adds help text for PHY_MICREL

Changes in v2:
- migrate PHY_GIGE to Kconfig

 drivers/net/Kconfig     |  8 ++++++++
 drivers/net/phy/Kconfig | 34 ++++++++++++++++++++++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 70e3661..653ee5a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -22,6 +22,13 @@ menuconfig NETDEVICES
 
 if NETDEVICES
 
+config PHY_GIGE
+	bool "Enable GbE PHY status parsing and configuration"
+	help
+	  Enables support for parsing the status output and for
+	  configuring GbE PHYs (affects the inner workings of some
+	  commands and miiphyutil.c).
+
 config AG7XXX
 	bool "Atheros AG7xxx Ethernet MAC support"
 	depends on DM_ETH && ARCH_ATH79
@@ -165,6 +172,7 @@ config SUN8I_EMAC
         bool "Allwinner Sun8i Ethernet MAC support"
         depends on DM_ETH
         select PHYLIB
+	select PHY_GIGE
         help
           This driver supports the  Allwinner based SUN8I/SUN50I Ethernet MAC.
 	  It can be found in H3/A64/A83T based SoCs and compatible with both
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 1d514e9..e2dfd88 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -44,6 +44,40 @@ config PHY_MARVELL
 
 config PHY_MICREL
 	bool "Micrel Ethernet PHYs support"
+	help
+	  Enable support for the GbE PHYs manufactured by Micrel (now
+	  a part of Microchip). This includes drivers for the KSZ804,
+	  KSZ8031, KSZ8051, KSZ8081, KSZ8895, KSZ886x, KSZ8721
+	  either/or KSZ9021 (see the "Micrel KSZ9021 family support"
+	  config option for details), and KSZ9031 (if configured).
+
+if PHY_MICREL
+
+config PHY_MICREL_KSZ9021
+	bool "Micrel KSZ9021 family support"
+	select PHY_GIGE
+	help
+	  Enable support for the Micrel KSZ9021 GbE PHY family.  If
+	  enabled, the extended register read/write for KSZ9021 PHYs
+	  is supported through the 'mdio' command and any RGMII signal
+	  delays configured in the device tree will be applied to the
+	  PHY during initialisation.
+
+	  Note that the KSZ9021 uses the same part number os the
+	  KSZ8921BL, so enabling this option disables support for the
+	  KSZ8721BL.
+
+config PHY_MICREL_KSZ9031
+	bool "Micrel KSZ9031 family support"
+	select PHY_GIGE
+	help
+	  Enable support for the Micrel KSZ9031 GbE PHY family.  If
+	  enabled, the extended register read/write for KSZ9021 PHYs
+	  is supported through the 'mdio' command and any RGMII signal
+	  delays configured in the device tree will be applied to the
+	  PHY during initialisatioin.
+
+endif # PHY_MICREL
 
 config PHY_MSCC
 	bool "Microsemi Corp Ethernet PHYs support"
-- 
1.9.1