[U-Boot] [PATCH 2/2] LS2080A: Move sec_init to board_init

[york sun]

On 02/03/2017 03:26 AM, Udit Agarwal wrote:
> Moves sec_init to board_init rather than in misc_init function beacuse
> PPA will be initialised in board_init function and for PPA validation
> sec_init has to be done prior to PPA init.
>
> Signed-off-by: Sumit Garg <sumit.garg at nxp.com>
> Signed-off-by: Udit Agarwal <udit.agarwal at nxp.com>
> ---
>  board/freescale/ls2080aqds/ls2080aqds.c | 6 +++---
>  board/freescale/ls2080ardb/ls2080ardb.c | 6 +++---
>  2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
> index 73a61fd..d9d0bea 100644
> --- a/board/freescale/ls2080aqds/ls2080aqds.c
> +++ b/board/freescale/ls2080aqds/ls2080aqds.c
> @@ -223,6 +223,9 @@ int board_init(void)
>  #endif
>  	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
>  	rtc_enable_32khz_output();
> +#ifdef CONFIG_FSL_CAAM
> +        sec_init();
> +#endif

Use tab instead of space in the future. I will fix this one for you.

>
>  	return 0;
>  }
> @@ -264,9 +267,6 @@ int dram_init(void)
>  #if defined(CONFIG_ARCH_MISC_INIT)
>  int arch_misc_init(void)
>  {
> -#ifdef CONFIG_FSL_CAAM
> -	sec_init();
> -#endif
>  	return 0;
>  }
>  #endif
> diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
> index 02954ef..b0024d3 100644
> --- a/board/freescale/ls2080ardb/ls2080ardb.c
> +++ b/board/freescale/ls2080ardb/ls2080ardb.c
> @@ -184,6 +184,9 @@ int board_init(void)
>  	/* invert AQR405 IRQ pins polarity */
>  	out_le32(irq_ccsr + IRQCR_OFFSET / 4, AQR405_IRQ_MASK);
>  #endif
> +#ifdef CONFIG_FSL_CAAM
> +        sec_init();
> +#endif

Same here.

York