[U-Boot] [PATCH v2 3/7] i2c: lpc32xx: Factor out i2c_adapter parameter
Sylvain Lemieux
slemieux.tyco at gmail.com
Mon Mar 27 15:11:36 UTC 2017
From: Liam Beguin <lbeguin at tycoint.com>
This is part of the prep work for the migration to the driver model.
It will enable the driver to support DM and non-DM configurations
using the same functions.
Signed-off-by: Liam Beguin <lbeguin at tycoint.com>
Signed-off-by: Sylvain Lemieux <slemieux at tycoint.com>
---
Changes from v1 to v2:
* Fixed checkpatch issue.
drivers/i2c/lpc32xx_i2c.c | 107 +++++++++++++++++++++++-----------------------
1 file changed, 53 insertions(+), 54 deletions(-)
diff --git a/drivers/i2c/lpc32xx_i2c.c b/drivers/i2c/lpc32xx_i2c.c
index e5dfdfe1df..62d2d7eee5 100644
--- a/drivers/i2c/lpc32xx_i2c.c
+++ b/drivers/i2c/lpc32xx_i2c.c
@@ -29,7 +29,7 @@
#endif
/* i2c register set */
-struct lpc32xx_i2c_registers {
+struct lpc32xx_i2c_base {
union {
u32 rx;
u32 tx;
@@ -61,15 +61,15 @@ struct lpc32xx_i2c_registers {
#define LPC32XX_I2C_STAT_NAI 0x00000004
#define LPC32XX_I2C_STAT_TDI 0x00000001
-static struct lpc32xx_i2c_registers *lpc32xx_i2c[] = {
- (struct lpc32xx_i2c_registers *)I2C1_BASE,
- (struct lpc32xx_i2c_registers *)I2C2_BASE,
- (struct lpc32xx_i2c_registers *)(USB_BASE + 0x300)
+static struct lpc32xx_i2c_base *lpc32xx_i2c[] = {
+ (struct lpc32xx_i2c_base *)I2C1_BASE,
+ (struct lpc32xx_i2c_base *)I2C2_BASE,
+ (struct lpc32xx_i2c_base *)(USB_BASE + 0x300)
};
/* Set I2C bus speed */
-static unsigned int __i2c_set_bus_speed(struct i2c_adapter *adap,
- unsigned int speed)
+static unsigned int __i2c_set_bus_speed(struct lpc32xx_i2c_base *base,
+ unsigned int speed, unsigned int chip)
{
int half_period;
@@ -77,7 +77,7 @@ static unsigned int __i2c_set_bus_speed(struct i2c_adapter *adap,
return -EINVAL;
/* OTG I2C clock source and CLK registers are different */
- if (adap->hwadapnr == 2) {
+ if (chip == 2) {
half_period = (get_periph_clk_rate() / speed) / 2;
if (half_period > 0xFF)
return -EINVAL;
@@ -87,38 +87,35 @@ static unsigned int __i2c_set_bus_speed(struct i2c_adapter *adap,
return -EINVAL;
}
- writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_hi);
- writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_lo);
+ writel(half_period, &base->clk_hi);
+ writel(half_period, &base->clk_lo);
return 0;
}
/* I2C init called by cmd_i2c when doing 'i2c reset'. */
-static void __i2c_init(struct i2c_adapter *adap,
- int requested_speed, int slaveadd)
+static void __i2c_init(struct lpc32xx_i2c_base *base,
+ int requested_speed, int slaveadd, unsigned int chip)
{
- struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
-
/* soft reset (auto-clears) */
- writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
+ writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl);
/* set HI and LO periods for half of the default speed */
- __i2c_set_bus_speed(adap, requested_speed);
+ __i2c_set_bus_speed(base, requested_speed, chip);
}
/* I2C probe called by cmd_i2c when doing 'i2c probe'. */
-static int __i2c_probe_chip(struct i2c_adapter *adap, u8 dev)
+static int __i2c_probe_chip(struct lpc32xx_i2c_base *base, u8 dev)
{
- struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
int stat;
/* Soft-reset the controller */
- writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
- while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET)
+ writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl);
+ while (readl(&base->ctrl) & LPC32XX_I2C_SOFT_RESET)
;
/* Addre slave for write with start before and stop after */
writel((dev<<1) | LPC32XX_I2C_TX_START | LPC32XX_I2C_TX_STOP,
- &i2c->tx);
+ &base->tx);
/* wait for end of transation */
- while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
+ while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI))
;
/* was there no acknowledge? */
return (stat & LPC32XX_I2C_STAT_NAI) ? -1 : 0;
@@ -128,20 +125,19 @@ static int __i2c_probe_chip(struct i2c_adapter *adap, u8 dev)
* I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c
* Begin write, send address byte(s), begin read, receive data bytes, end.
*/
-static int __i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
- int alen, u8 *data, int length)
+static int __i2c_read(struct lpc32xx_i2c_base *base, u8 dev, uint addr,
+ int alen, u8 *data, int length)
{
- struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
int stat, wlen;
/* Soft-reset the controller */
- writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
- while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET)
+ writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl);
+ while (readl(&base->ctrl) & LPC32XX_I2C_SOFT_RESET)
;
/* do we need to write an address at all? */
if (alen) {
/* Address slave in write mode */
- writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx);
+ writel((dev<<1) | LPC32XX_I2C_TX_START, &base->tx);
/* write address bytes */
while (alen--) {
/* compute address byte + stop for the last one */
@@ -149,44 +145,44 @@ static int __i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
if (!alen)
a |= LPC32XX_I2C_TX_STOP;
/* Send address byte */
- writel(a, &i2c->tx);
+ writel(a, &base->tx);
}
/* wait for end of transation */
- while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
+ while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI))
;
/* clear end-of-transaction flag */
- writel(1, &i2c->stat);
+ writel(1, &base->stat);
}
/* do we have to read data at all? */
if (length) {
/* Address slave in read mode */
- writel(1 | (dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx);
+ writel(1 | (dev<<1) | LPC32XX_I2C_TX_START, &base->tx);
wlen = length;
/* get data */
while (length | wlen) {
/* read status for TFF and RFE */
- stat = readl(&i2c->stat);
+ stat = readl(&base->stat);
/* must we, can we write a trigger byte? */
if ((wlen > 0)
& (!(stat & LPC32XX_I2C_STAT_TFF))) {
wlen--;
/* write trigger byte + stop if last */
writel(wlen ? 0 :
- LPC32XX_I2C_TX_STOP, &i2c->tx);
+ LPC32XX_I2C_TX_STOP, &base->tx);
}
/* must we, can we read a data byte? */
if ((length > 0)
& (!(stat & LPC32XX_I2C_STAT_RFE))) {
length--;
/* read byte */
- *(data++) = readl(&i2c->rx);
+ *(data++) = readl(&base->rx);
}
}
/* wait for end of transation */
- while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
+ while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI))
;
/* clear end-of-transaction flag */
- writel(1, &i2c->stat);
+ writel(1, &base->stat);
}
/* success */
return 0;
@@ -196,38 +192,37 @@ static int __i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
* I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c
* Begin write, send address byte(s), send data bytes, end.
*/
-static int __i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
- int alen, u8 *data, int length)
+static int __i2c_write(struct lpc32xx_i2c_base *base, u8 dev, uint addr,
+ int alen, u8 *data, int length)
{
- struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
int stat;
/* Soft-reset the controller */
- writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
- while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET)
+ writel(LPC32XX_I2C_SOFT_RESET, &base->ctrl);
+ while (readl(&base->ctrl) & LPC32XX_I2C_SOFT_RESET)
;
/* do we need to write anything at all? */
if (alen | length)
/* Address slave in write mode */
- writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx);
+ writel((dev<<1) | LPC32XX_I2C_TX_START, &base->tx);
else
return 0;
/* write address bytes */
while (alen) {
/* wait for transmit fifo not full */
- stat = readl(&i2c->stat);
+ stat = readl(&base->stat);
if (!(stat & LPC32XX_I2C_STAT_TFF)) {
alen--;
int a = (addr >> (8 * alen)) & 0xff;
if (!(alen | length))
a |= LPC32XX_I2C_TX_STOP;
/* Send address byte */
- writel(a, &i2c->tx);
+ writel(a, &base->tx);
}
}
while (length) {
/* wait for transmit fifo not full */
- stat = readl(&i2c->stat);
+ stat = readl(&base->stat);
if (!(stat & LPC32XX_I2C_STAT_TFF)) {
/* compute data byte, add stop if length==0 */
length--;
@@ -235,44 +230,48 @@ static int __i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
if (!length)
d |= LPC32XX_I2C_TX_STOP;
/* Send data byte */
- writel(d, &i2c->tx);
+ writel(d, &base->tx);
}
}
/* wait for end of transation */
- while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
+ while (!((stat = readl(&base->stat)) & LPC32XX_I2C_STAT_TDI))
;
/* clear end-of-transaction flag */
- writel(1, &i2c->stat);
+ writel(1, &base->stat);
return 0;
}
static void lpc32xx_i2c_init(struct i2c_adapter *adap,
int requested_speed, int slaveadd)
{
- __i2c_init(adap, requested_speed, slaveadd);
+ __i2c_init(lpc32xx_i2c[adap->hwadapnr], requested_speed, slaveadd,
+ adap->hwadapnr);
}
static int lpc32xx_i2c_probe_chip(struct i2c_adapter *adap, u8 dev)
{
- return __i2c_probe_chip(adap, dev);
+ return __i2c_probe_chip(lpc32xx_i2c[adap->hwadapnr], dev);
}
static int lpc32xx_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
int alen, u8 *data, int length)
{
- return __i2c_read(adap, dev, addr, alen, data, length);
+ return __i2c_read(lpc32xx_i2c[adap->hwadapnr], dev, addr,
+ alen, data, length);
}
static int lpc32xx_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
int alen, u8 *data, int length)
{
- return __i2c_write(adap, dev, addr, alen, data, length);
+ return __i2c_write(lpc32xx_i2c[adap->hwadapnr], dev, addr,
+ alen, data, length);
}
static unsigned int lpc32xx_i2c_set_bus_speed(struct i2c_adapter *adap,
unsigned int speed)
{
- return __i2c_set_bus_speed(adap, speed);
+ return __i2c_set_bus_speed(lpc32xx_i2c[adap->hwadapnr], speed,
+ adap->hwadapnr);
}
U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_0, lpc32xx_i2c_init, lpc32xx_i2c_probe_chip,
--
2.11.0
More information about the U-Boot
mailing list