[U-Boot] [PATCH 8/8] dts: rk3399-puma: enable spi1 and spi5, add /spi1/spiflash

[Philipp Tomsich]

From: Jakob Unterwurzacher <jakob.unterwurzacher at theobroma-systems.com>

The RK3399-Q7 (Puma) unsually (this is a build-time option for
customised boards) has an on-module SPI-flash connected to SPI1.
As of today, this is a Winbond W25Q32DW (32MBit) device.

The SPI5 controller is routed to the Q7 edge connector and provides
general-purpose SPI connectivity for customer base-boards.

With some minor improvements on integration into our outbound tree
 - explicitly modelled the SPI flash as 'spiflash' under spi0
   [dts: rk3399-puma: explicitly model spi-flash under spi1]
 - renamed the aliases to spi0 and spi1 to allow easier use of
   commands and legacy (SPL) infrastructure... i.e. the controllers
   will be 0 and 1 for 'sf probe', 'sspi', etc.
   [dts: rk3399-puma: rename aliases to number spi as 0 and 1 for commands]

X-AffectedPlatforms: RK3399-Q7
Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
Tested-by: Jakob Unterwurzacher <jakob.unterwurzacher at theobroma-systems.com>
---

 arch/arm/dts/rk3399-puma.dts | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm/dts/rk3399-puma.dts b/arch/arm/dts/rk3399-puma.dts
index 4f68451..dc00bd9 100644
--- a/arch/arm/dts/rk3399-puma.dts
+++ b/arch/arm/dts/rk3399-puma.dts
@@ -18,6 +18,11 @@
 		u-boot,spl-boot-order = &sdhci, "mmc1";
 	};
 
+	aliases {
+		spi0 = &spi1;
+		spi1 = &spi5;
+	};
+
 	vdd_center: vdd-center {
 		compatible = "pwm-regulator";
 		pwms = <&pwm3 0 25000 0>;
@@ -159,3 +164,24 @@
 	rx_delay = <0x10>;
 	status = "okay";
 };
+
+&spi1 {
+	u-boot,dm-pre-reloc;
+
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	spiflash: w25q32dw at 0 {
+		compatible = "spi-flash";
+		reg = <0>;
+		spi-max-frequency = <5000000>;
+		spi-cpol;
+		spi-cpha;
+	};
+};
+
+&spi5 {
+	status = "okay";
+};
-- 
1.9.1