[U-Boot] [PATCH 3/3] mvebu: dts: a80x0: Sync the DB DTS with standard config A
kostap at marvell.com
kostap at marvell.com
Tue Mar 28 15:36:35 UTC 2017
From: Konstantin Porotchkin <kostap at marvell.com>
Sync the default configuration of Armada-8040-DB with
Marvell u-boot-2015 standard configuration "A" for the same board.
The standard configuration "A" enables 2 PCIe slots on CP0
and 3 PCIe slots on CP1.
This is the main configuration used for u-boot and Linux tests.
This patch also re-arranges the DTS file entries by grouping
all nodes related to CP0 and CP1.
Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
Cc: Stefan Roese <sr at denx.de>
Cc: Igal Liberman <igall at marvell.com>
Cc: Nadav Haklai <nadavh at marvell.com>
---
arch/arm/dts/armada-8040-db.dts | 222 +++++++++++++++++++++-------------------
1 file changed, 115 insertions(+), 107 deletions(-)
diff --git a/arch/arm/dts/armada-8040-db.dts b/arch/arm/dts/armada-8040-db.dts
index 40def9d..e1e6dfd 100644
--- a/arch/arm/dts/armada-8040-db.dts
+++ b/arch/arm/dts/armada-8040-db.dts
@@ -83,28 +83,68 @@
&cpm_pinctl {
/* MPP Bus:
- * [0-31] = 0xff: Keep default CP0_shared_pins:
- * [11] CLKOUT_MPP_11 (out)
- * [23] LINK_RD_IN_CP2CP (in)
- * [25] CLKOUT_MPP_25 (out)
- * [29] AVS_FB_IN_CP2CP (in)
- * [32,34] SMI
- * [31] GPIO: push button/Wake
- * [35-36] GPIO
- * [37-38] I2C
- * [40-41] SATA[0/1]_PRESENT_ACTIVEn
- * [42-43] XSMI
- * [44-55] RGMII1
- * [56-62] SD
+ * [0-31] = 0xff: Keep default CP0_shared_pins
+ * [11] CLKOUT_MPP_11 (out)
+ * [23] LINK_RD_IN_CP2CP (in)
+ * [25] CLKOUT_MPP_25 (out)
+ * [29] AVS_FB_IN_CP2CP (in)
+ * [32,34] GE_MDIO/MDC
+ * [33] GPIO: GE_INT#/push button/Wake
+ * [35] MSS_GPIO[3]: MSS_PWDN
+ * [36] MSS_GPIO[5]: MSS_VTT_EN
+ * [37-38] I2C0
+ * [39] PTP_CLK
+ * [40-41] SATA[0/1]_PRESENT_ACTIVEn
+ * [42-43] XG_MDC/XG_MDIO (XSMI)
+ * [44-55] RGMII1
+ * [56-62] SD
*/
- /* 0 1 2 3 4 5 6 7 8 9 */
+ /* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
- 0xff 0 7 0 7 0 0 2 2 0
- 0 0 8 8 1 1 1 1 1 1
- 1 1 1 1 1 1 0xe 0xe 0xe 0xe
- 0xe 0xe 0xe >;
+ 0xff 0xff 0x7 0x0 0x7 0xa 0xa 0x2 0x2 0x5
+ 0x9 0x9 0x8 0x8 0x1 0x1 0x1 0x1 0x1 0x1
+ 0x1 0x1 0x1 0x1 0x1 0x1 0xe 0xe 0xe 0xe
+ 0xe 0xe 0xe>;
+};
+
+&cpm_comphy {
+ /* Serdes Configuration:
+ * Lane 0: PCIe0 (x1)
+ * Lane 1: SATA0
+ * Lane 2: KR (10G)
+ * Lane 3: SATA1
+ * Lane 4: USB3_HOST1
+ * Lane 5: PCIe2 (x1)
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_SATA0>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_KR>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_USB3_HOST1>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_PEX2>;
+ };
+};
+
+/* CON6 on CP0 expansion */
+&cpm_pcie0 {
+ status = "okay";
+};
+
+&cpm_pcie1 {
+ status = "disabled";
};
/* CON5 on CP0 expansion */
@@ -134,21 +174,69 @@
status = "okay";
};
+&cpm_utmi0 {
+ status = "okay";
+};
+
+&cpm_utmi1 {
+ status = "okay";
+};
+
&cps_pinctl {
/* MPP Bus:
- * [0-11] RGMII0
- * [13-16] SPI1
- * [27,31] GE_MDIO/MDC
- * [32-62] = 0xff: Keep default CP1_shared_pins:
+ * [0-11] RGMII0
+ * [13-16] SPI1
+ * [27,31] GE_MDIO/MDC
+ * [28] SATA1_PRESENT_ACTIVEn
+ * [29-30] UART0
+ * [32-62] = 0xff: Keep default CP1_shared_pins
*/
- /* 0 1 2 3 4 5 6 7 8 9 */
+ /* 0 1 2 3 4 5 6 7 8 9 */
pin-func = < 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0x3
- 0x3 0x3 0xff 0x3 0x3 0x3 0x3 0xff 0xff 0xff
- 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8 0xff 0xff
- 0xff 0x8 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
+ 0x3 0x3 0x3 0x3 0x3 0x3 0x3 0xff 0xff 0xff
+ 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0x8 0x9 0xa
+ 0xA 0x8 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
- 0xff 0xff 0xff >;
+ 0xff 0xff 0xff>;
+};
+
+&cps_comphy {
+ /* Serdes Configuration:
+ * Lane 0: PCIe0 (x1)
+ * Lane 1: SATA0
+ * Lane 2: KR (10G)
+ * Lane 3: SATA1
+ * Lane 4: PCIe1 (x1)
+ * Lane 5: PCIe2 (x1)
+ */
+ phy0 {
+ phy-type = <PHY_TYPE_PEX0>;
+ };
+ phy1 {
+ phy-type = <PHY_TYPE_SATA0>;
+ };
+ phy2 {
+ phy-type = <PHY_TYPE_KR>;
+ };
+ phy3 {
+ phy-type = <PHY_TYPE_SATA1>;
+ };
+ phy4 {
+ phy-type = <PHY_TYPE_PEX1>;
+ };
+ phy5 {
+ phy-type = <PHY_TYPE_PEX2>;
+ };
+};
+
+/* CON6 on CP1 expansion */
+&cps_pcie0 {
+ status = "okay";
+};
+
+&cps_pcie1 {
+ status = "okay";
};
/* CON5 on CP1 expansion */
@@ -200,86 +288,6 @@
status = "okay";
};
-&cpm_comphy {
- /*
- * Serdes Configuration:
- * Lane 0: SGMII2
- * Lane 1: USB3_HOST0
- * Lane 2: KR (10G)
- * Lane 3: SATA1
- * Lane 4: USB3_HOST1
- * Lane 5: PEX2x1
- */
- phy0 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
- };
-
- phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- };
-
- phy2 {
- phy-type = <PHY_TYPE_KR>;
- };
-
- phy3 {
- phy-type = <PHY_TYPE_SATA1>;
- };
-
- phy4 {
- phy-type = <PHY_TYPE_USB3_HOST1>;
- };
-
- phy5 {
- phy-type = <PHY_TYPE_PEX2>;
- };
-};
-
-&cps_comphy {
- /*
- * Serdes Configuration:
- * Lane 0: SGMII2
- * Lane 1: USB3_HOST0
- * Lane 2: KR (10G)
- * Lane 3: SATA1
- * Lane 4: Unconnected
- * Lane 5: PEX2x1
- */
- phy0 {
- phy-type = <PHY_TYPE_SGMII2>;
- phy-speed = <PHY_SPEED_3_125G>;
- };
-
- phy1 {
- phy-type = <PHY_TYPE_USB3_HOST0>;
- };
-
- phy2 {
- phy-type = <PHY_TYPE_KR>;
- };
-
- phy3 {
- phy-type = <PHY_TYPE_SATA1>;
- };
-
- phy4 {
- phy-type = <PHY_TYPE_UNCONNECTED>;
- };
-
- phy5 {
- phy-type = <PHY_TYPE_PEX2>;
- };
-};
-
-&cpm_utmi0 {
- status = "okay";
-};
-
-&cpm_utmi1 {
- status = "okay";
-};
-
&cps_utmi0 {
status = "okay";
};
--
2.7.4
More information about the U-Boot
mailing list