[U-Boot] [PATCH v3 05/13] usb: phy: Add STi USB2 PHY
patrice.chotard at st.com
patrice.chotard at st.com
Tue Mar 28 16:03:06 UTC 2017
From: Patrice Chotard <patrice.chotard at st.com>
This is the generic phy driver for the picoPHY ports
used by USB2/1.1 controllers. It is found on STiH407 SoC
family from STMicroelectronics.
Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---
v3: _ convert driver to USB PHY uclass
v2: _ replace bitfield_replace() by clrsetbits_le32()
doc/device-tree-bindings/phy/phy-stih407-usb.txt | 24 +++
drivers/usb/phy/Kconfig | 9 ++
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/sti_usb_phy.c | 181 +++++++++++++++++++++++
4 files changed, 215 insertions(+)
create mode 100644 doc/device-tree-bindings/phy/phy-stih407-usb.txt
create mode 100644 drivers/usb/phy/sti_usb_phy.c
diff --git a/doc/device-tree-bindings/phy/phy-stih407-usb.txt b/doc/device-tree-bindings/phy/phy-stih407-usb.txt
new file mode 100644
index 0000000..de6a706
--- /dev/null
+++ b/doc/device-tree-bindings/phy/phy-stih407-usb.txt
@@ -0,0 +1,24 @@
+ST STiH407 USB PHY controller
+
+This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and USB3
+host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroelectronics.
+
+Required properties:
+- compatible : should be "st,stih407-usb2-phy"
+- st,syscfg : phandle of sysconfig bank plus integer array containing phyparam and phyctrl register offsets
+- resets : list of phandle and reset specifier pairs. There should be two entries, one
+ for the whole phy and one for the port
+- reset-names : list of reset signal names. Should be "global" and "port"
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+Example:
+
+usb2_picophy0: usbpicophy at f8 {
+ compatible = "st,stih407-usb2-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_core 0x100 0xf4>;
+ resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
+ <&picophyreset STIH407_PICOPHY0_RESET>;
+ reset-names = "global", "port";
+};
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 0539401..98c1995 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -7,4 +7,13 @@ config USB_PHY
Enable driver model for USB PHY access. It defines basic
init and exit API.
+config STI_USB_PHY
+ bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
+ depends on USB_PHY
+ default y if ARCH_STI
+ help
+ This is the generic phy driver for the picoPHY ports
+ used by USB2 and USB3 Host controllers available on
+ STiH407 SoC families.
+
endmenu
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index 5314dcb..584cc96 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_USB_PHY) += usb_phy_uclass.o
obj-$(CONFIG_TWL4030_USB) += twl4030.o
obj-$(CONFIG_OMAP_USB_PHY) += omap_usb_phy.o
obj-$(CONFIG_ROCKCHIP_USB2_PHY) += rockchip_usb2_phy.o
+obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
diff --git a/drivers/usb/phy/sti_usb_phy.c b/drivers/usb/phy/sti_usb_phy.c
new file mode 100644
index 0000000..9058246
--- /dev/null
+++ b/drivers/usb/phy/sti_usb_phy.c
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2017
+ * Patrice Chotard <patrice.chotard at st.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <bitfield.h>
+#include <dm.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <libfdt.h>
+#include <regmap.h>
+#include <reset-uclass.h>
+#include <syscon.h>
+#include <usb_phy-uclass.h>
+#include <wait_bit.h>
+
+#include <linux/bitops.h>
+#include <linux/compat.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Default PHY_SEL and REFCLKSEL configuration */
+#define STIH407_USB_PICOPHY_CTRL_PORT_CONF 0x6
+
+/* ports parameters overriding */
+#define STIH407_USB_PICOPHY_PARAM_DEF 0x39a4dc
+
+#define PHYPARAM_REG 1
+#define PHYCTRL_REG 2
+#define PHYPARAM_NB 3
+
+struct sti_usb_phy {
+ struct regmap *regmap;
+ struct reset_ctl global_ctl;
+ struct reset_ctl port_ctl;
+ int param;
+ int ctrl;
+};
+
+static int sti_usb_phy_deassert(struct sti_usb_phy *phy)
+{
+ int ret;
+
+ ret = reset_deassert(&phy->global_ctl);
+ if (ret < 0) {
+ error("PHY global deassert failed: %d", ret);
+ return ret;
+ }
+
+ ret = reset_deassert(&phy->port_ctl);
+ if (ret < 0)
+ error("PHY port deassert failed: %d", ret);
+
+ return ret;
+}
+
+static int sti_usb_phy_init(struct usb_phy_desc *usb_phy_desc)
+{
+ struct udevice *dev = usb_phy_desc->dev;
+ struct sti_usb_phy *phy = dev_get_priv(dev);
+ void __iomem *reg;
+
+ /* set ctrl picophy value */
+ reg = (void __iomem *)phy->regmap->base + phy->ctrl;
+ /* CTRL_PORT mask is 0x1f */
+ clrsetbits_le32(reg, 0x1f, STIH407_USB_PICOPHY_CTRL_PORT_CONF);
+
+ /* set ports parameters overriding */
+ reg = (void __iomem *)phy->regmap->base + phy->param;
+ /* PARAM_DEF mask is 0xffffffff */
+ clrsetbits_le32(reg, 0xffffffff, STIH407_USB_PICOPHY_PARAM_DEF);
+
+ return sti_usb_phy_deassert(phy);
+}
+
+static int sti_usb_phy_exit(struct usb_phy_desc *usb_phy_desc)
+{
+ struct udevice *dev = usb_phy_desc->dev;
+ struct sti_usb_phy *phy = dev_get_priv(dev);
+ int ret;
+
+ ret = reset_deassert(&phy->port_ctl);
+ if (ret < 0) {
+ error("PHY port deassert failed: %d", ret);
+ return ret;
+ }
+
+ ret = reset_deassert(&phy->global_ctl);
+ if (ret < 0)
+ error("PHY global deassert failed: %d", ret);
+
+ return ret;
+}
+
+struct usb_phy_ops sti_usb_phy_ops = {
+ .init = sti_usb_phy_init,
+ .exit = sti_usb_phy_exit,
+};
+
+int sti_usb_phy_probe(struct udevice *dev)
+{
+ struct sti_usb_phy *priv = dev_get_priv(dev);
+ struct udevice *syscon;
+ struct fdtdec_phandle_args syscfg_phandle;
+ u32 cells[PHYPARAM_NB];
+ int ret, count;
+
+ /* get corresponding syscon phandle */
+ ret = fdtdec_parse_phandle_with_args(gd->fdt_blob, dev->of_offset,
+ "st,syscfg", NULL, 0, 0,
+ &syscfg_phandle);
+ if (ret < 0) {
+ error("Can't get syscfg phandle: %d\n", ret);
+ return ret;
+ }
+
+ ret = uclass_get_device_by_of_offset(UCLASS_SYSCON, syscfg_phandle.node,
+ &syscon);
+ if (ret) {
+ error("unable to find syscon device (%d)\n", ret);
+ return ret;
+ }
+
+ priv->regmap = syscon_get_regmap(syscon);
+ if (!priv->regmap) {
+ error("unable to find regmap\n");
+ return -ENODEV;
+ }
+
+ /* get phy param offset */
+ count = fdtdec_get_int_array_count(gd->fdt_blob, dev->of_offset,
+ "st,syscfg", cells,
+ ARRAY_SIZE(cells));
+
+ if (count < 0) {
+ error("Bad PHY st,syscfg property %d\n", count);
+ return -EINVAL;
+ }
+
+ if (count > PHYPARAM_NB) {
+ error("Unsupported PHY param count %d\n", count);
+ return -EINVAL;
+ }
+
+ priv->param = cells[PHYPARAM_REG];
+ priv->ctrl = cells[PHYCTRL_REG];
+
+ /* get global reset control */
+ ret = reset_get_by_name(dev, "global", &priv->global_ctl);
+ if (ret) {
+ error("can't get global reset for %s (%d)", dev->name, ret);
+ return ret;
+ }
+
+ /* get port reset control */
+ ret = reset_get_by_name(dev, "port", &priv->port_ctl);
+ if (ret) {
+ error("can't get port reset for %s (%d)", dev->name, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id sti_usb_phy_ids[] = {
+ { .compatible = "st,stih407-usb2-phy" },
+ { }
+};
+
+U_BOOT_DRIVER(sti_usb_phy) = {
+ .name = "sti_usb_phy",
+ .id = UCLASS_USB_PHY,
+ .of_match = sti_usb_phy_ids,
+ .probe = sti_usb_phy_probe,
+ .ops = &sti_usb_phy_ops,
+ .priv_auto_alloc_size = sizeof(struct sti_usb_phy),
+};
--
1.9.1
More information about the U-Boot
mailing list