[U-Boot] [PATCH v3 08/13] usb: xhci: Add STi xhci support

[patrice.chotard at st.com]

From: Patrice Chotard <patrice.chotard at st.com>

Add support for on-chip DWC3 controller available
on STMicrolectronics STiH407 family SoCs.
On B2260 board, the type AB USB connector is managed
by a DWC3 IP. As USB3 signals are not wired, only USB2
is supported.

Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---

v3:	_ update to use the new USB PHY uclass
	_ previously, xhci-sti driver binded dwc3-sti (STi glue driver) which was not correct.
	  Now we respect the device tree hierarchy, ie the STi dwc3 glue driver is first probed, 
	  then bind the xhci-sti driver.

 drivers/usb/host/Kconfig    |   8 ++++
 drivers/usb/host/Makefile   |   1 +
 drivers/usb/host/xhci-sti.c | 114 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 123 insertions(+)
 create mode 100644 drivers/usb/host/xhci-sti.c

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b259a05..62dc5b6 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -38,6 +38,14 @@ config USB_XHCI_ROCKCHIP
 	help
 	  Enables support for the on-chip xHCI controller on Rockchip SoCs.
 
+config USB_XHCI_STI
+	bool "Support for STMicroelectronics STiH407 family on-chip xHCI USB controller"
+	depends on ARCH_STI
+	default y
+	help
+	  Enables support for the on-chip xHCI controller on STMicroelectronics
+	  STiH407 family SoCs.
+
 config USB_XHCI_ZYNQMP
 	bool "Support for Xilinx ZynqMP on-chip xHCI USB controller"
 	depends on ARCH_ZYNQMP
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index b78e632..40ff830 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
 obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
 obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
 obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
+obj-$(CONFIG_USB_XHCI_STI) += xhci-sti.o
 
 # designware
 obj-$(CONFIG_USB_DWC2) += dwc2.o
diff --git a/drivers/usb/host/xhci-sti.c b/drivers/usb/host/xhci-sti.c
new file mode 100644
index 0000000..c445dc5
--- /dev/null
+++ b/drivers/usb/host/xhci-sti.c
@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2017
+ * Patrice Chotard <patrice.chotard at st.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <common.h>
+#include <dm.h>
+#include <fdtdec.h>
+#include <usb.h>
+#include <usb_phy.h>
+
+#include "xhci.h"
+#include <linux/usb/dwc3.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+__weak int __board_usb_init(int index, enum usb_init_type init)
+{
+	return 0;
+}
+/*int board_usb_init(int index, enum usb_init_type init)*/
+/*        __attribute__((weak, alias("__board_usb_init")));*/
+
+struct sti_xhci_platdata {
+	struct usb_phy_desc usb_phy;
+	phys_addr_t dwc3_regs;
+};
+
+struct sti_xhci_priv {
+	struct xhci_ctrl ctrl;
+};
+
+static int sti_xhci_core_init(struct dwc3 *dwc3_reg)
+{
+	int ret;
+
+	ret = dwc3_core_init(dwc3_reg);
+	if (ret) {
+		debug("failed to initialize core\n");
+		return ret;
+	}
+
+	/* We are hard-coding DWC3 core to Host Mode */
+	dwc3_set_mode(dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
+
+	return 0;
+}
+
+static int sti_xhci_ofdata_to_platdata(struct udevice *dev)
+{
+	struct sti_xhci_platdata *plat = dev_get_platdata(dev);
+	u32 reg[2];
+	int ret;
+
+	/* get the dwc3 register space base address */
+	if (fdtdec_get_int_array(gd->fdt_blob, dev_of_offset(dev), "reg", reg,
+				 ARRAY_SIZE(reg))) {
+		debug("dwc3 node has bad/missing 'reg' property\n");
+		return -FDT_ERR_NOTFOUND;
+	}
+	plat->dwc3_regs = reg[0];
+
+	ret = usb_phy_get_by_name(dev, "usb2-phy", &plat->usb_phy);
+	if (ret)
+		error("USB PHY DT node not found for %s\n", dev->name);
+
+	return 0;
+}
+
+static int sti_xhci_probe(struct udevice *dev)
+{
+	struct sti_xhci_platdata *plat = dev_get_platdata(dev);
+	struct xhci_hcor *hcor;
+	struct xhci_hccr *hccr;
+	struct dwc3 *dwc3_reg;
+	int ret;
+
+	hccr = (struct xhci_hccr *)plat->dwc3_regs;
+	hcor = (struct xhci_hcor *)((phys_addr_t)hccr +
+			HC_LENGTH(xhci_readl(&(hccr)->cr_capbase)));
+
+	ret = usb_phy_init(&plat->usb_phy);
+	if (ret) {
+		error("Can't init USB PHY for %s\n", dev->name);
+		return ret;
+	}
+
+	dwc3_reg = (struct dwc3 *)((char *)(hccr) + DWC3_REG_OFFSET);
+
+	sti_xhci_core_init(dwc3_reg);
+
+	return xhci_register(dev, hccr, hcor);
+}
+
+static const struct udevice_id sti_xhci_ids[] = {
+	{ .compatible = "snps,dwc3" },
+	{ }
+};
+
+U_BOOT_DRIVER(xhci_sti) = {
+	.name = "xhci_sti",
+	.id = UCLASS_USB,
+	.of_match = sti_xhci_ids,
+	.ofdata_to_platdata = sti_xhci_ofdata_to_platdata,
+	.probe = sti_xhci_probe,
+	.remove = xhci_deregister,
+	.ops = &xhci_usb_ops,
+	.priv_auto_alloc_size = sizeof(struct sti_xhci_priv),
+	.platdata_auto_alloc_size = sizeof(struct sti_xhci_platdata),
+	.flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
-- 
1.9.1